| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Time-of-check time-of-use (TOCTOU) race condition vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute Pardus MyComputer allows Leveraging Time-of-Check and Time-of-Use (TOCTOU) Race Conditions.
This issue affects Pardus MyComputer: from 0.8.0 before 0.8.1. |
| A time-of-check to time-of-use (TOCTOU) race condition in the Sandisk Dashboard installer allows a local, authenticated standard user to replace an installer-staged binary in a user-writable temporary directory between validation and execution. The elevated installer then executes the attacker-controlled binary, resulting in local privilege escalation to a high-integrity (administrative) context. This issue affects Sandisk Dashboard through 5.2.2.3. |
| In server mode pgAdmin 4 validates a path a user gives for a file in their storage directory with check_access_permission() and then opened it by name. Several places opened it with a plain open() or handed the path to a utility that opened it later: the servers.json export and import and the import file listing, and the files given to pg_dump, pg_dumpall, pg_restore and psql by Backup, Restore and Import/Export Data. A symbolic link swapped in at the file or at any parent directory between the check and the open redirected the operation outside the storage directory, so a file could be written, overwritten or read, or loaded into a table, as the operating-system account running pgAdmin. A hard link to an outside file, which O_NOFOLLOW does not detect, and a FIFO, which could hang a request, had the same effect. CVE-2026-86861 fixed this for the File Manager's save_file; these were the remaining paths.
Exploitation requires creating such a link or FIFO inside the user's storage directory. pgAdmin offers no way to do so, and the per-user storage directories belong to the pgAdmin account, so this requires write access to the storage backend as a different operating-system user, for example a shared or network-mounted storage directory, and winning the race.
The fix opens each file by walking down from the storage directory one component at a time with O_NOFOLLOW, accepting only a regular file with one link, and passes the utilities the open descriptor (/dev/fd/N) on Linux. Error messages no longer include the server path.
This issue affects pgAdmin 4: before 9.19. |
| A vulnerability was identified in olivier-ls PHP-FTS up to 1.1.3. This impacts the function TrigramIndex::open of the file Storage.php. Such manipulation leads to time-of-check time-of-use. The attack needs to be performed locally. Upgrading to version 1.1.4 will fix this issue. The name of the patch is 0b2fae333d6b022da7ed4c43e2d41aa03f91dff3. Upgrading the affected component is recommended. The project maintainer explains: "[T]he attack requires write access to the index directory by a user other than the one running the application. That is a real shared-hosting scenario and worth defending against, which is why it is fixed but it is a hardening measure rather than a remotely reachable vulnerability, and the "Code Execution" impact additionally assumes the symlink target is a web-served .php file." |
| A flaw was found in the DPDK vhost library. When handling a virtio indirect descriptor table, the host reads the table length more than once from guest memory and can allocate a host copy before validating that length. A guest that changes the length between those reads, or that supplies an out-of-range next index on a small host copy in the vDPA relay path, can cause the host vhost process to walk past the validated mapping or heap copy. That can crash or disrupt the vhost process. Out-of-bounds bytes are consumed as descriptor fields for GPA translation and are not returned to the guest as payload. This is a residual issue in the non-contiguous indirect descriptor copy path introduced as part of the CVE-2018-1059 fix. |
| A flaw was found in DPDK lib/vhost vhost-crypto. The indirect-descriptor snapshot double-fetches a guest descriptor next index, allowing a malicious guest to cause an out-of-bounds access in the host backend. |
| filelock is a platform-independent file lock for Python. From 3.20.4 until 4.2.1, ReadWriteLock and AsyncReadWriteLock on Windows use _connect to attach SQLite to the lock database by pathname, allowing another local account that can create adjacent names to place a database-wal or database-journal side file before acquisition. An undeletable WAL file makes each read or write acquisition fail immediately with sqlite3.OperationalError regardless of timeout. Separately, when the database contains at least one table, a hot journal that grants the lock account modify rights can cause SQLite recovery to delete a file named by that journal only when the lock account has permission to delete the target. The issue requires a directory writable by another account, such as a shared Windows temporary directory, and does not affect private directories. This issue is fixed in version 4.2.1. |
| 2FAuth is a web app to manage Two-Factor Authentication (2FA) accounts and generate their security codes. Prior to 8.0.0, the otpauth image-fetch path validates a hostname through ValidatesUrls::isExternalHost() and then lets IconService::storeRemoteImage() resolve the same hostname again for the HTTP request. When external otpauth image fetching is enabled, an authenticated user controlling low-TTL authoritative DNS can return a public address during validation and an internal address during the later connection, bypassing the private-address deny list to reach loopback, private-network, link-local, or cloud metadata endpoints. This issue is fixed in version 8.0.0. |
| In JetBrains Datalore before 2026.4 code execution was possible in another user's computation via an init script upload race condition |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent robust futex exit race some more
A robust futex unlock stores 0 over the whole futex value - wiping
FUTEX_WAITERS - and wakes a single waiter. That wakeup is a one-shot
notification: the protocol relies on its recipient to either acquire the
futex (and eventually unlock while aware of the remaining contention) or
re-arm FUTEX_WAITERS before sleeping again. If the woken waiter is killed
before it can do either, the kernel must jump in and wake the next task
down the line.
This is a known complication of the futex protocol with a previous
partial fix in commit ca16d5bee598 ("futex: Prevent robust futex exit
race"). Unfortunately, that fix is insufficient.
If a third task re-acquired the futex through the uncontended fast
path in the meantime, the notification is lost: robust exit processing
sees that it is owned by another task and does nothing, while the new
owner sees no FUTEX_WAITERS when it unlocks and wakes nobody.
The remaining waiters sleep forever behind a free futex:
A owns the futex, B and C sleep in FUTEX_WAIT
uval == A | FUTEX_WAITERS
A robust unlock: store 0, FUTEX_WAKE(1) wakes B
uval == 0
D fast path acquire: cmpxchg(0 -> D)
uval == D, no FUTEX_WAITERS
B killed before acting on the wakeup
B exit walk, pending op: owner D != B -> no action
D unlock: no FUTEX_WAITERS -> no wake
C sleeps forever
This is clearly a shortcoming in the implementation, which fails to keep
the FUTEX_WAITERS bit consistent.
Work around this by augmenting the robust list exit processing to also
perform the extra wakeup if the futex word is owned by another thread but
FUTEX_WAITERS is not set.
This does not fix the problem of a non-contended take over/release and free
sequence, which has been discussed for years and has been addressed by
commit 3ca9595d9fb6 ("futex: Add support for unlocking robust futexes") and
subsequent changes, but failed to take the problem described above into
account.
A more complete solution which is based on the in kernel unlock of
contended robust futexes has been discussed in the context of this change
and should show up in mainline sooner than later.
[ tglx: Amend change log slightly and fixup coding style ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Handle torn-down topology gracefully in drm_dp_mst_topology_queue_probe()
A hotplug or link-loss event can tear down the MST topology
(setting mgr->mst_state = false and mgr->mst_primary = NULL) concurrently
with a caller invoking drm_dp_mst_topology_queue_probe(). Since the check
is already performed under mgr->lock, the condition is not a programming
error but a valid race -- the topology was valid when the caller decided
to call this function, but was torn down before the lock was acquired.
Replace the drm_WARN_ON() with a graceful early return. This eliminates
spurious kernel warnings and the resulting compositor crashes observed
when connecting/disconnecting DP MST monitors, while keeping the correct
behavior of doing nothing when MST is not active. A drm_dbg_mst() trace
is added so the skipped probe remains observable under MST debug logging.
The existing WARN_ON(mgr->mst_primary) in drm_dp_mst_topology_mgr_set_mst()
already catches the case where the topology is initialized twice, so no
diagnostic coverage is lost. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: userspace: fix use-after-free in get_local_id
In mptcp_pm_userspace_get_local_id(), the address entry is looked up under
spinlock, but its id is read after dropping the lock. A concurrent deletion
can free the entry between the unlock and the read, leading to UAF.
The race window is narrow. It was reproduced only with a locally
constructed stress test that repeatedly overlaps an MP_JOIN SYN with a
MPTCP_PM_CMD_SUBFLOW_DESTROY request.
However, the KASAN report below confirms that the race is reachable:
[ 666.319376] BUG: KASAN: slab-use-after-free in mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319386] Read of size 1 at addr ffff888124845610 by task swapper/0/0
...
[ 666.319401] Call Trace:
[ 666.319405] <IRQ>
[ 666.319408] dump_stack_lvl+0x53/0x70
[ 666.319412] print_address_description.constprop.0+0x2c/0x3b0
[ 666.319418] print_report+0xbe/0x2b0
[ 666.319421] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319423] kasan_report+0xce/0x100
[ 666.319426] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319429] mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319433] mptcp_pm_get_local_id+0x371/0x440
...
[ 666.319821] Allocated by task 45539:
[ 666.319844] kasan_save_stack+0x33/0x60
[ 666.319855] kasan_save_track+0x14/0x30
[ 666.319858] __kasan_kmalloc+0x8f/0xa0
[ 666.319863] __kmalloc_noprof+0x1e7/0x520
[ 666.319867] sock_kmalloc+0xdf/0x130
[ 666.319885] sock_kmemdup+0x1b/0x40
[ 666.319888] mptcp_userspace_pm_append_new_local_addr+0x261/0x500
[ 666.319910] mptcp_pm_nl_announce_doit+0x16a/0x610
...
[ 666.319967] Freed by task 45560:
[ 666.319988] kasan_save_stack+0x33/0x60
[ 666.319991] kasan_save_track+0x14/0x30
[ 666.319994] kasan_save_free_info+0x3b/0x60
[ 666.319998] __kasan_slab_free+0x43/0x70
[ 666.320000] kfree+0x166/0x440
[ 666.320003] sock_kfree_s+0x1d/0x50
[ 666.320007] mptcp_userspace_pm_delete_local_addr.isra.0+0x157/0x200
[ 666.320011] mptcp_pm_nl_subflow_destroy_doit+0x51d/0xea0
Fix by copying the id into a local variable while still holding the lock,
and use -1 as a "not found" sentinel. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/khugepaged: write all dirty file folios when collapsing
[There is no upstream commit, as this code was removed by upstream
commit 044925f9b565 ("mm: fs: remove filemap_nr_thps*() functions and their users")]
As-is, khugepaged and writable-file opening exclude each other. A file
cannot be open writeable and have THPs (because the filesystem is not aware
of them). khugepaged will never collapse file pages for files that are
opened writeable. On an open(O_RDWR/O_WRONLY), the page cache for that
particular file is dropped. This is fine because nothing could've been
dirtied.
However, there is an edge-case: collapse_file() might not be able to
coexist with concurrent writers, but it can coexist with dirty folios
(from previous writers). Therefore, the following can happen:
open(file, O_RDWR)
write(file)
close(file)
madvise(file_mapping, MADV_COLLAPSE, some non-dirty range)
open(file, O_RDWR)
nr_thps > 0
truncate_inode_pages()
/* THPs are cleared out, but so are the dirty folios */
When this edge-case happens, there is data loss, as the dirty folios are
fully discarded.
Fix it by fully writing back the page cache (and waiting) when collapsing
file THPs. Doing so provides the guarantee that no dirty folio will be
observed while there are active THPs. To fully ensure this is safe, the
invalidate_lock needs to be held while doing the writeout, so that
do_dentry_open()'s page cache truncation excludes this write-and-wait.
As a side effect, move the nr_thps counter bumping outside the i_pages
lock. This is correct since the counter itself is an atomic_t and the
producer <-> consumer correctness is provided by a full memory barrier:
smp_mb() in collapse_file()/memory barrier implied by full ordering in
get_write_access() -> atomic_inc_unless_negative(). |
| In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Do not fill_pool() if pi_blocked_on
On RT enabled kernels, fill_pool() ends up calling rtlock_lock(), which
asserts if current::pi_blocked_on is set, because a task can obviously only
block on one lock as otherwise the priority inheritenace chain gets
corrupted.
Prevent this by expanding the conditional to take current::pi_blocked_on
into account. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Guard mana_remove against double invocation
If PM resume fails (e.g., mana_attach() returns an error), mana_probe()
calls mana_remove(), which tears down the device and sets
gd->gdma_context = NULL and gd->driver_data = NULL.
However, a failed resume callback does not automatically unbind the
driver. When the device is eventually unbound, mana_remove() is invoked
a second time. Without a NULL check, it dereferences gc->dev with
gc == NULL, causing a kernel panic.
Add an early return if gdma_context or driver_data is NULL so the second
invocation is harmless. Move the dev = gc->dev assignment after the
guard so it cannot dereference NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ap: use generic driver_override infrastructure
When the AP masks are updated via apmask_store() or aqmask_store(),
ap_bus_revise_bindings() is called after ap_attr_mutex has been
released.
This calls __ap_revise_reserved(), which accesses the driver_override
field without holding any lock, racing against a concurrent
driver_override_store() that may free the old string, resulting in a
potential UAF.
Fix this by using the driver-core driver_override infrastructure, which
protects all accesses with an internal spinlock.
Note that unlike most other buses, the AP bus does not check
driver_override in its match() callback; the override is checked in
ap_device_probe() and __ap_revise_reserved() instead.
Also note that we do not enable the driver_override feature of struct
bus_type, as AP - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n".
Additionally, AP has a custom counter that is modified in the
corresponding custom driver_override_store(). |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/64s: Fix unmap race with PMD migration entries
The following race is possible with migration swap entries or
device-private THP entries. e.g. when move_pages is called on a PMD THP
page, then there maybe an intermediate state, where PMD entry acts as
a migration swap entry (pmd_present() is true). Then if an munmap
happens at the same time, then this VM_BUG_ON() can happen in
pmdp_huge_get_and_clear_full().
This patch fixes that.
Thread A: move_pages() syscall
add_folio_for_migration()
mmap_read_lock(mm)
folio_isolate_lru(folio)
mmap_read_unlock(mm)
do_move_pages_to_node()
migrate_pages()
try_to_migrate_one()
spin_lock(ptl)
set_pmd_migration_entry()
pmdp_invalidate() # PMD: _PAGE_INVALID | _PAGE_PTE | pfn
set_pmd_at() # PMD: migration swap entry (pmd_present=0)
spin_unlock(ptl)
[page copy phase] # <--- RACE WINDOW -->
Thread B: munmap()
mmap_write_downgrade(mm)
unmap_vmas() -> zap_pmd_range()
zap_huge_pmd()
__pmd_trans_huge_lock()
pmd_is_huge(): # !pmd_present && !pmd_none -> TRUE (swap entry)
pmd_lock() -> # spin_lock(ptl), waits for Thread A to release ptl
pmdp_huge_get_and_clear_full()
VM_BUG_ON(!pmd_present(*pmdp)) # HITS!
[ 287.738700][ T1867] ------------[ cut here ]------------
[ 287.743843][ T1867] kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:187!
cpu 0x0: Vector: 700 (Program Check) at [c00000044037f4f0]
pc: c000000000094ca4: pmdp_huge_get_and_clear_full+0x6c/0x23c
lr: c000000000645dec: zap_huge_pmd+0xb0/0x868
sp: c00000044037f790
msr: 800000000282b033
current = 0xc0000004032c1a00
paca = 0xc000000004fe0000 irqmask: 0x03 irq_happened: 0x09
pid = 1867, comm = a.out
kernel BUG at :187!
Linux version 6.19.0-12136-g14360d4f917c-dirty (powerpc64le-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #27 SMP PREEMPT Sun Feb 22 10:38:56 IST 2026
enter ? for help
[link register ] c000000000645dec zap_huge_pmd+0xb0/0x868
[c00000044037f790] c00000044037f7d0 (unreliable)
[c00000044037f7d0] c000000000645dcc zap_huge_pmd+0x90/0x868
[c00000044037f840] c0000000005724cc unmap_page_range+0x176c/0x1f40
[c00000044037fa00] c000000000572ea0 unmap_vmas+0xb0/0x1d8
[c00000044037fa90] c0000000005af254 unmap_region+0xb4/0x128
[c00000044037fb50] c0000000005af400 vms_complete_munmap_vmas+0x138/0x310
[c00000044037fbe0] c0000000005b0f1c do_vmi_align_munmap+0x1ec/0x238
[c00000044037fd30] c0000000005b3688 __vm_munmap+0x170/0x1f8
[c00000044037fdf0] c000000000587f74 sys_munmap+0x2c/0x40
[c00000044037fe10] c000000000032668 system_call_exception+0x128/0x350
[c00000044037fe50] c00000000000d05c system_call_vectored_common+0x15c/0x2ec
---- Exception: 3000 (System Call Vectored) at 0000000010064a2c
SP (7fff9b1ee9c0) is in userspace
0:mon> zh
commit a30b48bf1b24 ("mm/migrate_device: implement THP migration of zone device pages"),
enabled migration for device-private PMD entries. Hence this is one
other path where this warning could get trigger from.
------------[ cut here ]------------
WARNING: arch/powerpc/mm/book3s64/hash_pgtable.c:199 at hash__pmd_hugepage_update+0x48/0x284, CPU#3: hmm-tests/1905
Modules linked in: test_hmm
CPU: 3 UID: 0 PID: 1905 Comm: hmm-tests Tainted: G B W L N 7.0.0-rc1-01438-g7e2f0ee7581c #21 PREEMPT
Tainted: [B]=BAD_PAGE, [W]=WARN, [L]=SOFTLOCKUP, [N]=TEST
Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries
NIP [c000000000096b70] hash__pmd_hugepage_update+0x48/0x284
LR [c000000000096e7c] hash__pmdp_huge_get_and_clear+0xd0/0xd4
Call Trace:
[c000000604707670] [c000000004e102b8] 0xc000000004e102b8 (unreliable)
[c000000604707700] [c00000000064ec3c] set_pmd_migration_entry+0x414/0x498
[c000000604707760] [c00000000063e5a4] migrate_vma_col
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix null-deref with concurrent writes in passthrough mode
In passthrough mode, when dm-cache starts to invalidate a cache
entry and bio prison cell lock fails due to concurrent write to
the same cached block, mg->cell remains NULL. The error path in
invalidate_complete() attempts to unlock and free the cell
unconditionally, causing a NULL pointer dereference:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 UID: 0 PID: 134 Comm: fio Not tainted 6.19.0-rc7 #3 PREEMPT
RIP: 0010:dm_cell_unlock_v2+0x3f/0x210
<snip>
Call Trace:
invalidate_complete+0xef/0x430
map_bio+0x130f/0x1a10
cache_map+0x320/0x6b0
__map_bio+0x458/0x510
dm_submit_bio+0x40e/0x16d0
__submit_bio+0x419/0x870
<snip>
Reproduce steps:
1. Create a cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. Promote the first data block into cache
fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \
--direct=1 --size=64k
3. Reload the cache into passthrough mode
dmsetup suspend cache
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup resume cache
4. Write to the first cached block concurrently
fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \
--randrepeat=0 --direct=1 --numjobs=2 --size 64k
Fix by checking if mg->cell is valid before attempting to unlock it. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix dirty mapping checking in passthrough mode switching
As mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata
object across inactive and active DM tables"), dm-cache assumed table
reload occurs after suspension, while LVM's table preload breaks this
assumption. The dirty mapping check for passthrough mode was designed
around this assumption and is performed during table creation, causing
the check to fail with preload while metadata updates are ongoing. This
risks loading dirty mappings into passthrough mode, resulting in data
loss.
Reproduce steps:
1. Create a writeback cache with zero migration_threshold to produce
dirty mappings
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writeback smq \
2 migration_threshold 0"
2. Preload a table in passthrough mode
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
3. Write to the first cache block to make it dirty
fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \
--direct=1 --size=64k
4. Resume the inactive table. Now it's possible to load the dirty block
into passthrough mode.
dmsetup resume cache
Fix by moving the checks to the preresume phase to support table
preloading. Also remove the unused function dm_cache_metadata_all_clean. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
When PERST# is deasserted twice (assert -> deassert -> assert -> deassert),
a CBB (Control Backbone) timeout occurs at DBI register offset 0x8bc
(PCIE_MISC_CONTROL_1_OFF). This happens because pci_epc_deinit_notify()
and dw_pcie_ep_cleanup() are called before reset_control_deassert() powers
on the controller core.
The call chain that causes the timeout:
pex_ep_event_pex_rst_deassert()
pci_epc_deinit_notify()
pci_epf_test_epc_deinit()
pci_epf_test_clear_bar()
pci_epc_clear_bar()
dw_pcie_ep_clear_bar()
__dw_pcie_ep_reset_bar()
dw_pcie_dbi_ro_wr_en() <- Accesses 0x8bc DBI register
reset_control_deassert(pcie->core_rst) <- Core powered on HERE
The DBI registers, including PCIE_MISC_CONTROL_1_OFF (0x8bc), are only
accessible after the controller core is powered on via
reset_control_deassert(pcie->core_rst). Accessing them before this point
results in a CBB timeout because the hardware is not yet operational.
Fix this by moving pci_epc_deinit_notify() and dw_pcie_ep_cleanup() to
after reset_control_deassert(pcie->core_rst), ensuring the controller is
fully powered on before any DBI register accesses occur. |
