| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| libexpat before 2.8.2 lacks handler call depth tracking for calls to XML_GetBuffer, XML_Parse, XML_ParseBuffer, XML_ParserFree, or XML_ParserReset from within handlers in cases of a policy violation. Thus, a use-after-free can occur, |
| FFmpeg through 9.0.2 contains a reference count leak in libavcodec/v4l2_buffers.c that allows attackers to deadlock the V4L2 mem2mem decoder on multi-plane capture formats. Attackers can supply crafted H.264, HEVC, or VP9 streams with resolution changes, making ff_v4l2_m2m_codec_reinit() wait forever and hang the decoding application. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_gact, act_police: range check the fallback control action
tcf_action_check_ctrlact() range checks the primary control action:
if (!opcode)
ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0;
TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it
cannot be set that way. But act_gact and act_police each carry a second,
independent control action supplied by user space that never reaches that
helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject
TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned
verbatim from the action.
In particular user space can store TC_ACT_CONSUMED, which is
TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value
range. That verdict tells every caller the action took ownership of the
skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for it. The result is
one leaked sk_buff plus its data buffer per packet traversing the filter,
unbounded, for all traffic on the chain including kernel-generated
packets.
Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so
with pval = 1 gact_determ() returns the fallback for every packet.
act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and
tcf_police_mtu_check() always passes.
TC_ACT_CONSUMED was added by commit 720f22fed81b ("net: sched: refactor
reinsert action"), after both goto-chain guards were written:
commit 9469f375ab09 ("net/sched: act_gact: disallow 'goto chain' on
fallback control action") and
commit c08f5ed5d625 ("net/sched: act_police: disallow 'goto chain' on
fallback control action"). Neither guard was widened when the new
verdict appeared.
Factor the existing range test out of tcf_action_check_ctrlact() as
tcf_action_valid() and apply it to both fallbacks. The helper cannot call
tcf_action_check_ctrlact() directly because that also allocates a
goto_chain, which is exactly what these two sites must not do.
Reproduced on v7.2-rc6: kmemleak reports one leaked 232-byte
skbuff_head_cache object plus its 704-byte data buffer per packet. With
this patch both configurations are rejected with -EINVAL and kmemleak
reports none. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: use exe_file_deny_write_access() for the interpreter clone
For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the
registered interpreter file and denies write access to the clone via
plain deny_write_access(). The clone is installed as
bprm->interpreter and later released by the exec machinery through
exe_file_allow_write_access() which skips the i_writecount increment
for files with FMODE_FSNOTIFY_HSM set.
The deny and allow side can therefore come to different conclusions
when pre-content watches are in play: if a pre-content watch is added
to the interpreter after registration every subsequent exec through
that entry takes a write denial on the clone that is never paired
with a write allowance, driving the interpreter inode's i_writecount
further down with each exec and leaving the interpreter unwritable
even after the entry and all its users are gone.
Take the write denial via exe_file_deny_write_access() so both sides
of the pairing base their decision on the same file mode, and
propagate failure instead of silently ignoring it: an interpreter
that is concurrently open for writing now fails the exec with
ETXTBSY, exactly like an interpreter freshly opened via open_exec()
would. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: don't let an 'F' entry pin its own instance
An entry registered with 'F' opens its interpreter at registration time
and holds that file until the entry is freed. Any entry nobody removes
by hand only gets closed once the binfmt_misc superblock is shut down.
If the interpreter lives on a mount that keeps that superblock alive the
two pin each other:
binfmt_misc sb -> inode -> entry -> interp_file -> vfsmount -> binfmt_misc sb
TL;DR the file is never closed. Once the mount namespace is gone there
is nothing left to unregister through either.
There are two ways to trigger this bug:
- Point the interpreter at the instance itself. Its files are regular
files owned by the mounter and both bm_get_inode() and
simple_fill_super() leave i_op at empty_iops. So notify_change() falls
back to simple_setattr() and chmod +x works. We never set SB_I_NOEXEC
and so open_exec() accepts it.
- Use the instance as an overlayfs lower layer. The overlay superblock
holds a clone_private_mount() of every layer until it is destroyed and
that clone is in no namespace. So umount_tree() never reaches it.
That's a DoS. And it isn't only the superblock that leaks. It pins the
user namespace it was mounted in, so every iteration permanently eats
one of the caller's user namespace charges.
So let's just do the sane thing. SB_I_NOEXEC makes open_exec() fail on
the instance's own files and s_stack_depth makes overlayfs reject the
layer before it ever takes a clone. That also covers the ecryptfs and
fuse passthrough variants. What 'F' promises is unchanged.
The stable tag is narrower than the Fixes tags on purpose. Before
sandboxed mounts this needed global root against the single instance
everyone shares, and the change doesn't apply to those trees anyway.
Note that SB_I_NODEV is implicitly raised for userns mounts but raise it
explicitly here as well. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix GISC refcount leak on AIF enable failure
kvm_s390_gisc_register() registers the guest ISC before pinning
the guest interrupt forwarding pages and allocating the AISB bit.
If any of the later setup steps fails, the function unwinds the
pinned pages and other local state, but does not unregister the
GISC reference. Add the missing kvm_s390_gisc_unregister() to the
error unwind path. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix device reference leak in host1x_device_parse_dt() error path
After device_initialize(), the embedded struct device in struct
host1x_device should be released through the device core with
put_device().
In host1x_device_add(), if host1x_device_parse_dt() fails, the current
error path frees the object directly with kfree(device). That bypasses
the normal device lifetime handling and leaks the reference held on the
embedded struct device.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fix this by using put_device() in the host1x_device_parse_dt() failure
path. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: frag: fix primary_if leak on failed linearization
If the skb has a frag_list, it must be linearized before it can be split
using skb_split(). But when this step failed, it must not only free the skb
but also take care of the reference to the already found primary_if. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: charger-manager: fix refcount leak in is_full_charged()
In is_full_charged(), power_supply_get_by_name() is called to
obtain a reference to the fuel_gauge power supply. If the
voltage check (uV >= desc->fullbatt_uV) succeeds, the function
returns true directly without releasing the reference, leaking
the refcount.
Fix this by setting a flag and jumping to the out label where
power_supply_put() properly drops the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: fix refcount leak in i_ipmi_request()
When a caller provides a `supplied_recv` message to i_ipmi_request(),
the function increments the user's `nr_msgs` reference count. If an
error occurs later, the out_err cleanup path only frees the recv_msg
if the function allocated it itself (i.e., !supplied_recv). In the
supplied_recv case the cleanup is skipped, leaving the reference count
elevated. The caller ipmi_request_supply_msgs() does not release the
supplied_recv on error, so the reference is permanently leaked.
Fix this by explicitly reverting the reference count operations when a
supplied recv_msg with a valid user pointer is present in the error
path: decrement nr_msgs and drop the user's kref. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Reject unhashed UDP sockets on sockmap update
UDP sockets get SOCK_RCU_FREE set when (auto-)bound. This means
sk_is_refcounted(unbound) = true, while sk_is_refcounted(bound) = false.
Because sockmap accepts unbound UDP sockets, a BPF program can increment a
socket's refcount via lookup. If the socket is subsequently bound, the
transition from unbound to bound causes bpf_sk_release() to skip the
decrement of the refcount, causing a memory leak.
unreferenced object 0xffff88810bc2eb40 (size 1984):
comm "test_progs", pid 2451, jiffies 4295320596
hex dump (first 32 bytes):
7f 00 00 01 7f 00 00 01 d2 04 1b b7 04 d2 00 00 ................
02 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace (crc bdee079d):
kmem_cache_alloc_noprof+0x557/0x660
sk_prot_alloc+0x69/0x240
sk_alloc+0x30/0x460
inet_create+0x2ce/0xf80
__sock_create+0x25b/0x5c0
__sys_socket+0x119/0x1d0
__x64_sys_socket+0x72/0xd0
do_syscall_64+0xa1/0x5f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Instead of special-casing for refcounted sockets, reject unhashed UDP
sockets during sockmap updates, as there is no benefit to supporting those.
This effectively reverts the commit under Fixes, with two exceptions:
1. sock_map_sk_state_allowed() maintains a fall-through `return true`.
2. In the spirit of commit b8b8315e39ff ("bpf, sockmap: Remove unhash
handler for BPF sockmap usage"), the proto::unhash BPF handler is not
reintroduced.
Historical note: this issue is related to commit 67312adc96b5 ("bpf: reject
unhashed sockets in bpf_sk_assign"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
The v4l2 helper v4l2_async_register_subdev_sensor() calls
v4l2_async_register_subdev(), which is a macro that expands to
__v4l2_async_register_subdev(sd,THIS_MODULE). Since the macro is expanded
inside v4l2-fwnode.c, THIS_MODULE resolves to the v4l2-fwnode module
rather than the sensor driver module that originally set sd->owner. When
v4l2-fwnode is built-in, THIS_MODULE evaluates to NULL, which then
overwrites the sensor driver's owner with NULL.
This causes the problem that the sensor module's reference count is never
incremented during async registration, so the module can be removed while
the subdevice is still in use by a notifier (e.g., a CSI-2 receiver
bridge driver).
Fix this by renaming v4l2_async_register_subdev_sensor() to
__v4l2_async_register_subdev_sensor() with an added explicit module
argument and introducing a wrapper macro:
#define v4l2_async_register_subdev_sensor(sd) \
__v4l2_async_register_subdev_sensor(sd, THIS_MODULE)
This ensures the sensor driver module is properly referenced even when
the sensor driver does not init the owner field before calling
v4l2_async_register_subdev_sensor() and prevents premature module removal. |
| In the Linux kernel, the following vulnerability has been resolved:
intel_th: fix MSC output device reference leak
intel_th_output_open() looks up the output device with
bus_find_device_by_devt(), which returns the device with a reference that
must be dropped after use.
commit 95fc36a234da ("intel_th: fix device leak on output open()")
attempted to drop the reference from intel_th_output_release(). However,
a successful open replaces file->f_op with the output driver file
operations before returning, so close runs the output driver release
callback instead.
For MSC outputs, close runs intel_th_msc_release(), which only removes
the per-file iterator and does not drop the device reference taken by
intel_th_output_open(). Consequently, every successful MSC output open
leaks one device reference.
Drop the device reference from intel_th_msc_release(), which is the
release path actually used for MSC output files. Remove the now-unused
intel_th_output_release() callback from intel_th_output_fops. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: fix device reference leak in firmware_upload_register()
firmware_upload_register()
-> fw_create_instance()
-> device_initialize()
After fw_create_instance() succeeds, the lifetime of the embedded struct
device is expected to be managed through the device core reference
counting, since fw_create_instance() has already called
device_initialize().
In firmware_upload_register(), if alloc_lookup_fw_priv() fails after
fw_create_instance() succeeds, the code reaches free_fw_sysfs and frees
fw_sysfs directly instead of releasing the device reference with
put_device(). This may leave the reference count of the embedded struct
device unbalanced, resulting in a refcount leak.
The issue was identified by a static analysis tool I developed and
confirmed by manual review. Fix this by using put_device(fw_dev) in the
failure path and letting fw_dev_release() handle the final cleanup,
instead of freeing the instance directly from the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path
In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference
via get_pid() and stores it in timer.it.cpu.pid. If the subsequent
posix_cpu_timer_set() call fails, the function returns immediately
without calling posix_cpu_timer_del() to release the pid reference,
causing a leak.
Fix it by calling posix_cpu_timer_del() before the unlock-and-return
on the error path, consistent with the other exit paths in the same
function. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: target: rdma: fix ndev refcount leak on queue connect
nvmet_rdma_queue_connect() calls nvmet_rdma_find_get_device() which
acquires a reference on the returned ndev via kref_get(). On the path
where the host queue backlog is exceeded and the function returns
NVME_SC_CONNECT_CTRL_BUSY, reference of ndev is not released, leaking
the kref.
Fix this by adding a goto to the existing put_device label before the
early return. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/colorop: Fix blob property reference tracking in state lifecycle
The colorop state blob property handling had memory leaks during state
duplication, destruction, and reset operations. The implementation
failed to follow the established pattern from drm_crtc's handling of
DEGAMMA/GAMMA blob properties.
Issues fixed:
- drm_colorop_atomic_destroy_state() was freeing state memory without
releasing the blob reference, causing a leak
- drm_colorop_reset() was directly freeing old state with kfree()
instead of properly destroying it, leaking blob references
- drm_colorop_cleanup() had duplicate blob cleanup code
Changes:
- Add __drm_atomic_helper_colorop_destroy_state() helper to properly
release blob references before freeing state memory
- Update drm_colorop_atomic_destroy_state() to call the helper
- Fix drm_colorop_reset() to use drm_colorop_atomic_destroy_state()
for proper cleanup of old state
- Simplify drm_colorop_cleanup() to use the common destruction path
This matches the well-tested pattern used by drm_crtc since 2016 and
ensures proper reference counting throughout the state lifecycle.
Co-developed by Claude Sonnet 4.5. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix memory leak in error path of hci_alloc_dev()
Early failures in Bluetooth HCI UART configuration leak SRCU percpu
memory.
When device initialization fails before hci_register_dev() completes,
the HCI_UNREGISTER flag is never set. As a result, when the device
reference count reaches zero, bt_host_release() evaluates this flag as
false and falls back to a direct kfree(hdev).
Because hci_release_dev() is bypassed, the SRCU struct initialized
early in hci_alloc_dev() is never cleaned up, resulting in a leak of
percpu memory.
Fix the leak by explicitly calling cleanup_srcu_struct() in the
fallback (unregistered) branch of bt_host_release() before freeing
the device. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix use-after-free in offloaded map/prog info fill
When querying info for an offloaded BPF map or program,
bpf_map_offload_info_fill_ns() and bpf_prog_offload_info_fill_ns()
obtain the network namespace with get_net(dev_net(offmap->netdev)).
However, the associated netdev's netns may be racing with teardown
during netns destruction. If the netns refcount has already reached 0,
get_net() performs a refcount_t increment on 0, triggering:
refcount_t: addition on 0; use-after-free.
Although rtnl_lock and bpf_devs_lock ensure the netdev pointer remains
valid, they cannot prevent the netns refcount from reaching zero.
Fix this by using maybe_get_net() instead of get_net(). maybe_get_net()
uses refcount_inc_not_zero() and returns NULL if the refcount is already
zero, which causes ns_get_path_cb() to fail and the caller to return
-ENOENT -- the correct behavior when the netns is being destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting
virtio_transport_init_zcopy_skb() uses iter->count as the size argument
for msg_zerocopy_realloc(), which in turn passes it to
mm_account_pinned_pages() for RLIMIT_MEMLOCK accounting. However, this
function is called after virtio_transport_fill_skb() has already consumed
the iterator via __zerocopy_sg_from_iter(), so on the last skb, iter->count
will be 0, skipping the RLIMIT_MEMLOCK enforcement.
Pass pkt_len (the total bytes being sent) as an explicit parameter to
virtio_transport_init_zcopy_skb() instead of reading the already-consumed
iter->count.
This matches TCP and UDP, which both call msg_zerocopy_realloc() with
the original message size. |
