| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| RSA BSAFE Crypto-J versions prior to 6.2.5 are vulnerable to Information Exposure Through Timing Discrepancy vulnerabilities during ECDSA key generation. A malicious remote attacker could potentially exploit those vulnerabilities to recover ECDSA keys. |
| Handlebars before 3.0.8 and 4.x before 4.5.3 is vulnerable to Arbitrary Code Execution. The lookup helper fails to properly validate templates, allowing attackers to submit templates that execute arbitrary JavaScript. This can be used to run arbitrary code on a server processing Handlebars templates or in a victim's browser (effectively serving as XSS). |
| In situations where an attacker receives automated notification of the success or failure of a decryption attempt an attacker, after sending a very large number of messages to be decrypted, can recover a CMS/PKCS7 transported encryption key or decrypt any RSA encrypted message that was encrypted with the public RSA key, using a Bleichenbacher padding oracle attack. Applications are not affected if they use a certificate together with the private RSA key to the CMS_decrypt or PKCS7_decrypt functions to select the correct recipient info to decrypt. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s). |
| A flaw was discovered in FasterXML jackson-databind in all versions before 2.9.10 and 2.10.0, where it would permit polymorphic deserialization of malicious objects using the xalan JNDI gadget when used in conjunction with polymorphic type handling methods such as `enableDefaultTyping()` or when @JsonTypeInfo is using `Id.CLASS` or `Id.MINIMAL_CLASS` or in any other way which ObjectMapper.readValue might instantiate objects from unsafe sources. An attacker could use this flaw to execute arbitrary code. |
| Calling Buffer.fill() or Buffer.alloc() with some parameters can lead to a hang which could result in a Denial of Service. In order to address this vulnerability, the implementations of Buffer.alloc() and Buffer.fill() were updated so that they zero fill instead of hanging in these cases. All versions of Node.js 6.x (LTS "Boron"), 8.x (LTS "Carbon"), and 9.x are vulnerable. All versions of Node.js 10.x (Current) are NOT vulnerable. |
| In all versions of Node.js 10 prior to 10.9.0, an argument processing flaw can cause `Buffer.alloc()` to return uninitialized memory. This method is intended to be safe and only return initialized, or cleared, memory. The third argument specifying `encoding` can be passed as a number, this is misinterpreted by `Buffer's` internal "fill" method as the `start` to a fill operation. This flaw may be abused where `Buffer.alloc()` arguments are derived from user input to return uncleared memory blocks that may contain sensitive information. |
| All versions of Node.js 9.x and 10.x are vulnerable and the severity is HIGH. An attacker can cause a denial of service (DoS) by causing a node process which provides an http server supporting TLS server to crash. This can be accomplished by sending duplicate/unexpected messages during the handshake. This vulnerability has been addressed by updating the TLS implementation. |
| All versions of Node.js 8.x, 9.x, and 10.x are vulnerable and the severity is HIGH. An attacker can cause a denial of service (DoS) by causing a node server providing an http2 server to crash. This can be accomplished by interacting with the http2 server in a manner that triggers a cleanup bug where objects are used in native code after they are no longer available. This has been addressed by updating the http2 implementation. |
| The Node.js inspector, in 6.x and later is vulnerable to a DNS rebinding attack which could be exploited to perform remote code execution. An attack is possible from malicious websites open in a web browser on the same computer, or another computer with network access to the computer running the Node.js process. A malicious website could use a DNS rebinding attack to trick the web browser to bypass same-origin-policy checks and to allow HTTP connections to localhost or to hosts on the local network. If a Node.js process with the debug port active is running on localhost or on a host on the local network, the malicious website could connect to it as a debugger, and get full code execution access. |
| The HTTP parser in all current versions of Node.js ignores spaces in the `Content-Length` header, allowing input such as `Content-Length: 1 2` to be interpreted as having a value of `12`. The HTTP specification does not allow for spaces in the `Content-Length` value and the Node.js HTTP parser has been brought into line on this particular difference. The security risk of this flaw to Node.js users is considered to be VERY LOW as it is difficult, and may be impossible, to craft an attack that makes use of this flaw in a way that could not already be achieved by supplying an incorrect value for `Content-Length`. Vulnerabilities may exist in user-code that make incorrect assumptions about the potential accuracy of this value compared to the actual length of the data supplied. Node.js users crafting lower-level HTTP utilities are advised to re-check the length of any input supplied after parsing is complete. |
| Simultaneous Multi-threading (SMT) in processors can enable local users to exploit software vulnerable to timing attacks via a side-channel timing attack on 'port contention'. |
| Spring Framework, versions 5.0 prior to 5.0.5 and versions 4.3 prior to 4.3.15 and older unsupported versions, allow applications to expose STOMP over WebSocket endpoints with a simple, in-memory STOMP broker through the spring-messaging module. A malicious user (or attacker) can craft a message to the broker that can lead to a remote code execution attack. |
| Spring Framework, versions 5.0.x prior to 5.0.6, versions 4.3.x prior to 4.3.17, and older unsupported versions allows applications to expose STOMP over WebSocket endpoints with a simple, in-memory STOMP broker through the spring-messaging module. A malicious user (or attacker) can craft a message to the broker that can lead to a regular expression, denial of service attack. |
| Spring Framework, version 5.1, versions 5.0.x prior to 5.0.10, versions 4.3.x prior to 4.3.20, and older unsupported versions on the 4.2.x branch provide support for range requests when serving static resources through the ResourceHttpRequestHandler, or starting in 5.0 when an annotated controller returns an org.springframework.core.io.Resource. A malicious user (or attacker) can add a range header with a high number of ranges, or with wide ranges that overlap, or both, for a denial of service attack. This vulnerability affects applications that depend on either spring-webmvc or spring-webflux. Such applications must also have a registration for serving static resources (e.g. JS, CSS, images, and others), or have an annotated controller that returns an org.springframework.core.io.Resource. Spring Boot applications that depend on spring-boot-starter-web or spring-boot-starter-webflux are ready to serve static resources out of the box and are therefore vulnerable. |
| Node.js: All versions prior to Node.js 6.15.0, 8.14.0, 10.14.0 and 11.3.0: Hostname spoofing in URL parser for javascript protocol: If a Node.js application is using url.parse() to determine the URL hostname, that hostname can be spoofed by using a mixed case "javascript:" (e.g. "javAscript:") protocol (other protocols are not affected). If security decisions are made about the URL based on the hostname, they may be incorrect. |
| A deserialization flaw was discovered in the jackson-databind, versions before 2.6.7.1, 2.7.9.1 and 2.8.9, which could allow an unauthenticated user to perform code execution by sending the maliciously crafted input to the readValue method of the ObjectMapper. |
| The Realm implementations in Apache Tomcat versions 9.0.0.M1 to 9.0.0.M9, 8.5.0 to 8.5.4, 8.0.0.RC1 to 8.0.36, 7.0.0 to 7.0.70 and 6.0.0 to 6.0.45 did not process the supplied password if the supplied user name did not exist. This made a timing attack possible to determine valid user names. Note that the default configuration includes the LockOutRealm which makes exploitation of this vulnerability harder. |
| Parse Server 8.2.2 before 8.6.92 and 9.0.0 before 9.10.1-alpha.12 contains an information disclosure vulnerability in which GraphQL validation error messages reveal hidden class names when public introspection is disabled. Unauthenticated attackers holding only the public Application Id can send crafted operations triggering unknown-argument or invalid enum value errors to learn pointer and relation target classes. |
| In Spring Framework versions 5.3.0 - 5.3.18, 5.2.0 - 5.2.20, and older unsupported versions, the patterns for disallowedFields on a DataBinder are case sensitive which means a field is not effectively protected unless it is listed with both upper and lower case for the first character of the field, including upper and lower case for the first character of all nested fields within the property path. |
| A memory leak vulnerability was found in the Linux kernel's eBPF for the Simulated networking device driver in the way user uses BPF for the device such that function nsim_map_alloc_elem being called. A local user could use this flaw to get unauthorized access to some data. |
