| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NFS/localio: fix ref leak on nfs_uuid_add_file failure
When nfs_uuid_add_file() races with nfs_uuid_put() tearing down
uuid->net, it returns -ENXIO without publishing nfl->nfs_uuid via
rcu_assign_pointer(). nfs_open_local_fh() then enters its error
branch and only releases the slot's file ref and its paired net
ref plus its own entry-time net ref, while the close path is a
no-op:
nfs_close_local_fh()
nfs_uuid = rcu_dereference(nfl->nfs_uuid);
if (!nfs_uuid) { rcu_read_unlock(); return; } /* always */
nfsd_open_local_fh() returns localio holding a caller-owned +1
nfsd_file reference (from nfsd_file_get() after
nfsd_file_acquire_local()) and an entry-time nfsd_net reference
(from its first nfsd_net_try_get()) embedded as nf->nf_net. Both
are leaked on the failure path, pinning one nfsd_file (and the
underlying struct file, dentry, inode) and one nfsd_net_ref per
occurrence, which blocks nfsd_net and netns teardown.
Fix by releasing the caller-owned file ref and its net ref through
the existing helper, using a stack-local RCU pointer so the helper
can xchg it out, then returning -ENXIO so callers do not
dereference a localio whose slot has been cleared:
struct nfsd_file __rcu *tmp = RCU_INITIALIZER(localio);
nfs_to_nfsd_file_put_local(pnf);
nfs_to_nfsd_file_put_local(&tmp);
localio = ERR_PTR(-ENXIO);
The trailing nfs_to_nfsd_net_put(net) continues to release the
outer net ref, so all three nfsd_net_try_get() increments are
balanced on the error branch. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix dentry ref leak on V4ROOT export filehandle lookup
nfsd_set_fh_dentry() leaks the dentry reference from
exportfs_decode_fh_raw() when the NFS3_FHSIZE or NFS_FHSIZE
switch cases detect NFSEXP_V4ROOT and goto out. The out: label
calls exp_put() but never dput(dentry), and fhp->fh_dentry was
never assigned so fh_put() cannot compensate.
A crafted NFSv3 filehandle targeting a V4ROOT export's fsid
triggers the leak on every request. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: Fix error path handling in rocket_job_run()
In rocket_job_run(), after taking an extra fence reference for
job->done_fence via dma_fence_get(), the error paths have three bugs:
- The dma_fence reference held by job->done_fence is never released,
causing a reference leak.
- pm_runtime_get_sync() increments the usage counter even on failure,
but the error path does not decrement it, leaking the runtime PM
reference and preventing the NPU from suspending.
- A valid but unsignaled fence is returned to the DRM scheduler,
which triggers WARN("Fence ... released with pending signals!")
when the scheduler drops its reference.
Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get()
which auto-balances the usage counter on failure, releasing both fence
references on error, and returning ERR_PTR(ret) instead of the
unsignaled fence.
[tomeu: Refactored error paths to use consolidated goto labels] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Put PCI device after handling PPR faults
iommu_call_iopf_notifier() looks up the requester with
pci_get_domain_bus_and_slot(), which returns a PCI device with its
reference count incremented.
Neither the successful iommu_report_device_fault() path nor the abort
path drops that reference, so every handled PPR request leaks a PCI
device reference.
This is the same ownership rule that was fixed for the old iommu_v2
ppr_notifier() path by commit 6cf0981c2233 ("iommu/amd: Fix pci device
refcount leak in ppr_notifier()"), but iommu_call_iopf_notifier() was
added later as a separate PPR/IOPF notifier path.
Drop the PCI device reference after handling the PPR entry. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Avoid locking internal accesses during unmap
iommufd_access_notify_unmap() skips internal accesses because they do
not have an external unmap callback to invoke.
However, the current test calls iommufd_lock_obj() before checking
whether the access is internal. If iommufd_lock_obj() succeeds, the loop
then sees the internal access and continues, bypassing the matching
iommufd_put_object() used by the normal unmap path. This leaks the
object reference taken by iommufd_lock_obj().
Check for internal accesses first so skipped entries are never locked. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio->private handling in netfs_perform_write()
Under some circumstances, netfs_perform_write() doesn't correctly
manipulate folio->private between NULL, NETFS_FOLIO_COPY_TO_CACHE, pointing
to a group and pointing to a netfs_folio struct, leading to potential
multiple attachments of private data with associated folio ref leaks and
also leaks of netfs_folio structs or netfs_group refs.
Fix this by consolidating the place at which a folio is marked uptodate in
one place and having that look at what's attached to folio->private and
decide how to clean it up and then set the new group. Also, the content
shouldn't be flushed if group is NULL, even if a group is specified in the
netfs_group parameter, as that would be the case for a new folio. A
filesystem should always specify netfs_group or never specify netfs_group.
The Sashiko auto-review tool noted that it was theoretically possible that
the fpos >= ctx->zero_point section might leak if it modified a streaming
write folio. This is unlikely, but with a network filesystem, third party
changes can happen. It also pointed out that __netfs_set_group() would
leak if called multiple times on the same folio from the "whole folio
modify section". |
| When the JAIL_AT_DESC flag is specified, kern_jail_set() and kern_jail_get() released the reference to the caller's current prison before looking up the jail descriptor. If the descriptor lookup failed, error-handling paths released the same reference a second time.
An unprivileged local user can trigger a prison reference count underflow, which may cause the prison structure to be freed while still in use. When this is done on the jail host, the bug will generally result in an immediate panic. However, if the user is running in a jail, then it may be possible to exploit the bug to elevate privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: disallow multiple FENCE chunks in one submit
amdgpu_cs_pass1() dispatches on chunk_id once per chunk without
rejecting repeated ids. p->uf_bo is a single-slot field, so a
submission carrying two AMDGPU_CHUNK_ID_FENCE chunks runs
amdgpu_cs_p1_user_fence() twice, and the second run overwrites
p->uf_bo with a freshly referenced BO without dropping the reference
taken by the first.
amdgpu_cs_parser_fini() only unrefs the final p->uf_bo, so every FENCE
chunk but the last leaks a BO reference. The leaked BO outlives handle
close and process exit.
Reject duplicate FENCE chunks the same way commit fec5f8e8c6bc
("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit") did
for p->bo_list.
(cherry picked from commit 665b1fc2a1845206408f9a2c6da67101789edb82) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix memory accounting for pinned/unpinned pages
The account_mem() and unaccount_mem() functions call get_uid() which
increments the reference count of struct user_struct on every invocation.
But we don't decrement the count by calling free_uid(). It also
accounted/unaccounted the pages against the current->mm. But its possible
the unaccount_mem() can be called from a different process context than the
one that originally pinned the pages.
Let's fix this by storing the pinning process user_struct and mm_struct
when accounting for pinned pages, and subsequently free these resources
when the pages are unpinned.
[borntraeger@linux.ibm.com: Fixed whitespace] |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: don't leak the user namespace when the mount fails
bm_get_tree() takes a reference to the user namespace and hands it to
get_tree_keyed() as the sget key. sget_fc() moves that reference into
sb->s_fs_info and clears fc->s_fs_info, so from that point on the
superblock owns it and bm_free() doesn't see it anymore.
The superblock drops it in ->put_super(). But generic_shutdown_super()
only calls ->put_super() from inside the if (sb->s_root) branch, so
nothing releases it when bm_fill_super() fails:
- The kzalloc_obj() failure leaves s_root NULL and the whole branch is
skipped.
- A simple_fill_super() failure in the file loop leaves s_root set, but
s_op still points at simple_super_operations, which has no
->put_super(). bm_fill_super() installs s_ops only once
simple_fill_super() returned success, and installing it earlier
wouldn't help either because simple_fill_super() overwrites s_op.
Either way vfs_get_super() calls deactivate_locked_super() and the
reference is gone for good. binfmt_misc mounts are available in a user
namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so
an unprivileged caller under a tight memory cgroup can fail
simple_fill_super() on demand and leak one user namespace per attempt.
Drop the reference in ->kill_sb() instead, which runs unconditionally,
the same way nfsd and rpc_pipefs release their keyed s_fs_info.
That also stops ->put_super() from clearing s_fs_info while the
superblock is still on @fs_supers. generic_shutdown_super() leaves it
there on purpose so that sget_fc() keeps finding it until kill_sb() has
run, but a NULL s_fs_info makes test_keyed_super() miss it, so a
concurrent mount for the same user namespace skips the grab_super()
wait and creates a second superblock for a namespace that is still
being torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: fix refcount leak in mlxsw_sp_port_lag_join()
When mlxsw_sp_port_lag_index_get() fails, mlxsw_sp_port_lag_join()
returns an error without releasing the lag reference obtained by
the earlier mlxsw_sp_lag_get(). All other error paths in the
function jump to the cleanup label that ends with
mlxsw_sp_lag_put(), so this is a single missed release.
Fix the leak by replacing the bare 'return err' with a goto to the
existing error cleanup label, which will drop the reference safely. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8192: Check runtime resume during probe
The MT8192 AFE probe enables runtime PM temporarily while reinitializing
the regmap cache from hardware, but it uses pm_runtime_get_sync()
without checking the return value. If runtime resume fails, probe keeps
going without the device necessarily being accessible, and
pm_runtime_get_sync() may leave the PM usage count incremented.
The regmap_reinit_cache() failure path also returns before dropping the
temporary PM reference and before clearing pm_runtime_bypass_reg_ctl.
Use pm_runtime_resume_and_get() so resume failures do not leak a usage
count, and clear the temporary bypass flag after dropping the probe PM
reference on all regmap_reinit_cache() outcomes. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: omap2430: Do not put borrowed of_node in probe
omap2430_probe() stores pdev->dev.of_node in a local np variable. This is
a borrowed pointer and the probe function does not take a reference to
it.
The success and error paths nevertheless call of_node_put(np). This drops
a reference that is owned by the platform device, and can leave
pdev->dev.of_node with an unbalanced reference count.
Do not put the borrowed platform device node from omap2430_probe().
References taken for the child MUSB device are handled by the device core,
and the ctrl-module phandle reference is still released separately. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: fix net namespace reference leak in reload
devlink_nl_reload_doit() calls devlink_netns_get(), which returns a net
with a held reference. When the requested namespace differs from the
current one and the reload action is not DRIVER_REINIT, the function
returns -EOPNOTSUPP without releasing the reference. Add the missing
put_net() on this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: Fix potential UAF in MLD delayed work
A race condition exists between device teardown and incoming MLD query
processing, leading to a Use-After-Free in the MLD delayed work.
During device destruction, the primary reference to inet6_dev is dropped,
which can drop its refcount to 0. The actual freeing of inet6_dev memory
is deferred via RCU.
Concurrently, the packet receive path runs under RCU read lock and obtains
the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can
safely dereference inet6_dev even if its refcount has hit 0.
However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it
attempts to acquire a reference using in6_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the inet6_dev memory is still scheduled to be freed after the RCU
grace period, the device is freed while the work is still scheduled.
When the work runs, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in6_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not schedule the work. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/mm: Fix handling of _PAGE_UNUSED pte bit
The _PAGE_UNUSED softbit should not really be lying around. Its sole
purpose is to signal to try_to_unmap_one() and try_to_migrate_one()
that the page can be discarded instead of being moved / swapped.
KVM has no way to know why a page is being unmapped, so it sets the bit
on userspace ptes corresponding to unused guest pages every time they
get unmapped. KVM has no reasonable way to clear the bit once the page
is in use again.
While set_ptes() checks and clears the bit, other paths that set new
ptes did not. This led to used pages being thrown out as if they were
unused, causing guest corruption.
Fix the issue by clearing the _PAGE_UNUSED bit for present ptes in
set_pte(), i.e. whenever a present pte is getting set. The check in
set_ptes() is then redundant and can be removed.
Also fix gmap_helper_try_set_pte_unused() to only set the bit if the
pte is present; the _PAGE_UNUSED bit is only defined for present ptes
and thus should not be set for non-present ptes. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: release exe file resources on path failure
get_current_exe_path() takes both an exe_file reference and a path
reference before resolving the path name. If aa_path_name() failed, it
returned immediately and leaked both references.
Route the failure through the common cleanup path so fput() and path_put()
always run after the references are acquired. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix refcount leak when updating the sk_ctx
Currently update_sk_ctx() transfers the plabel reference, unfortunately
it is also unconditionally put in the caller. Ideally we would make
the caller conditionally put the reference based on whether it was
transferred but for now just fix the bug by getting a reference. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Decouple req recycling from RPC completion
rl_kref formerly served two distinct lifetimes through a single
refcount: it gated when a Reply could wake its RPC task, and it
gated when an rpcrdma_req could return to its free pool. The
marshal path took the Send-side reference only when SGEs needed
DMA-unmap (sc_unmap_count > 0), which made a Send carrying only
pre-registered buffers an exception: the Reply handler dropped
rl_kref from 1 to 0 and freed the req while the HCA might still
be DMA-reading from its send buffer.
Give rl_kref a narrower job. The RPC layer takes one reference
when slot allocation hands a req out. rpcrdma_prepare_send_sges()
takes a Send-side reference unconditionally after WR preparation
succeeds. xprt_rdma_free_slot() and xprt_rdma_bc_free_rqst() drop
the RPC-layer reference; rpcrdma_sendctx_unmap() drops the
Send-side reference. The req returns to its free pool only after
both owners have signed off.
The existing kref_init(&req->rl_kref) call in
rpcrdma_prepare_send_sges() is removed. Initialization moves to
the slot-allocation paths (xprt_rdma_alloc_slot and
rpcrdma_bc_rqst_get), and the release callback re-arms rl_kref
before the req returns to a free pool. A re-init in the marshal
path would discard the RPC-layer reference that already exists
on entry.
Three invariants follow:
- Any rpcrdma_req held by an rpc_rqst has rl_kref >= 1.
xprt_rdma_alloc_slot(), rpcrdma_bc_rqst_get(), and the
backlog-wake branch in xprt_rdma_alloc_slot() each kref_init
rl_kref before publishing the req. Without this invariant,
an RPC task that aborts between slot allocation and marshal
(gss_refresh failure or signal during call_connect, for
example) would drive xprt_release() ->
xprt_rdma_free_slot() -> kref_put against a refcount of
zero, saturating refcount_t and stranding the slot.
- The Send-side reference is taken only after WR prep
succeeds. A mapping failure in rpcrdma_prepare_send_sges()
runs rpcrdma_sendctx_cancel(), which DMA-unmaps the sendctx
and clears sc_req without touching rl_kref. The sendctx
ring walks in rpcrdma_sendctx_put_locked() and
rpcrdma_sendctxs_destroy() skip entries with sc_req == NULL,
so a burst of -EIO marshal failures cannot hold reqs off
rb_send_bufs.
- The release callback re-arms rl_kref so the next consumer
enters with the invariant satisfied.
Replies now complete the RPC directly. rpcrdma_reply_handler()
calls rpcrdma_complete_rqst() in place of kref_put on the
non-LocalInv branch. The LocalInv branch already completes the
RPC from frwr_unmap_async() and is unaffected.
Because Send-side references can now outlive RPC completion,
connection teardown drains sendctx entries whose unsignaled
Sends never had a later signaled completion to walk the ring.
rpcrdma_sendctxs_destroy() walks the active range and runs
rpcrdma_sendctx_unmap() on each entry with a non-NULL sc_req
before the request buffers are reset, and is moved ahead of
rpcrdma_reqs_reset() in rpcrdma_xprt_disconnect() so the reqs
are still in their pre-reset state when the Send-side refs are
released.
The drain creates a teardown-ordering hazard on the backchannel
path. With the new lifetime, releasing a bc_prealloc req from
rpcrdma_req_release() re-adds it to bc_pa_list. The disconnect
in xprt_rdma_destroy() runs after xprt_destroy_backchannel() has
already emptied bc_pa_list, so the drained reqs would otherwise
leak. xprt_rdma_destroy() now runs xprt_rdma_bc_destroy(xprt, 0)
a second time after the disconnect to reclaim them. |
| In the Linux kernel, the following vulnerability has been resolved:
gpib: fix double decrement of descriptor_busy in command_ioctl()
commit d1857f8296dc ("gpib: fix use-after-free in IO ioctl handlers")
introduced a descriptor_busy reference counter to pin struct
gpib_descriptor across IO ioctl operations. In command_ioctl(), the
error path inside the loop decrements descriptor_busy and breaks, but
execution then falls through to the unconditional decrement after the
loop, underflowing the counter to -1.
This re-enables the use-after-free that the original fix was meant to
prevent: a concurrent close_dev_ioctl() sees descriptor_busy == 0 on
an actively-used descriptor and frees it.
Remove the early decrement from the error path. The post-loop
decrement already handles all exit paths, matching the correct pattern
used in read_ioctl() and write_ioctl(). |
