| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create
We have recently observed a number of subvolumes with broken dentries.
ls-ing the parent dir looks like:
drwxrwxrwt 1 root root 16 Jan 23 16:49 .
drwxr-xr-x 1 root root 24 Jan 23 16:48 ..
d????????? ? ? ? ? ? broken_subvol
and similarly stat-ing the file fails.
In this state, deleting the subvol fails with ENOENT, but attempting to
create a new file or subvol over it errors out with EEXIST and even
aborts the fs. Which leaves us a bit stuck.
dmesg contains a single notable error message reading:
"could not do orphan cleanup -2"
2 is ENOENT and the error comes from the failure handling path of
btrfs_orphan_cleanup(), with the stack leading back up to
btrfs_lookup().
btrfs_lookup
btrfs_lookup_dentry
btrfs_orphan_cleanup // prints that message and returns -ENOENT
After some detailed inspection of the internal state, it became clear
that:
- there are no orphan items for the subvol
- the subvol is otherwise healthy looking, it is not half-deleted or
anything, there is no drop progress, etc.
- the subvol was created a while ago and does the meaningful first
btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much
later.
- after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT,
which results in a negative dentry for the subvolume via
d_splice_alias(NULL, dentry), leading to the observed behavior. The
bug can be mitigated by dropping the dentry cache, at which point we
can successfully delete the subvolume if we want.
i.e.,
btrfs_lookup()
btrfs_lookup_dentry()
if (!sb_rdonly(inode->vfs_inode)->vfs_inode)
btrfs_orphan_cleanup(sub_root)
test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
btrfs_search_slot() // finds orphan item for inode N
...
prints "could not do orphan cleanup -2"
if (inode == ERR_PTR(-ENOENT))
inode = NULL;
return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume
btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
on the root when it runs, so it cannot run more than once on a given
root, so something else must run concurrently. However, the obvious
routes to deleting an orphan when nlinks goes to 0 should not be able to
run without first doing a lookup into the subvolume, which should run
btrfs_orphan_cleanup() and set the bit.
The final important observation is that create_subvol() calls
d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if
the dentry cache gets dropped, the next lookup into the subvolume will
make a real call into btrfs_orphan_cleanup() for the first time. This
opens up the possibility of concurrently deleting the inode/orphan items
but most typical evict() paths will be holding a reference on the parent
dentry (child dentry holds parent->d_lockref.count via dget in
d_alloc(), released in __dentry_kill()) and prevent the parent from
being removed from the dentry cache.
The one exception is delayed iputs. Ordered extent creation calls
igrab() on the inode. If the file is unlinked and closed while those
refs are held, iput() in __dentry_kill() decrements i_count but does
not trigger eviction (i_count > 0). The child dentry is freed and the
subvol dentry's d_lockref.count drops to 0, making it evictable while
the inode is still alive.
Since there are two races (the race between writeback and unlink and
the race between lookup and delayed iputs), and there are too many moving
parts, the following three diagrams show the complete picture.
(Only the second and third are races)
Phase 1:
Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set
btrfs_mksubvol()
lookup_one_len()
__lookup_slow()
d_alloc_parallel()
__d_alloc() // d_lockref.count = 1
create_subvol(dentry)
// doesn't touch the bit..
d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix folio isn't locked in softleaf_to_folio()
On arm64 server, we found folio that get from migration entry isn't locked
in softleaf_to_folio(). This issue triggers when mTHP splitting and
zap_nonpresent_ptes() races, and the root cause is lack of memory barrier
in softleaf_to_folio(). The race is as follows:
CPU0 CPU1
deferred_split_scan() zap_nonpresent_ptes()
lock folio
split_folio()
unmap_folio()
change ptes to migration entries
__split_folio_to_order() softleaf_to_folio()
set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry))
smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio))
prep_compound_page() for tail pages
In __split_folio_to_order(), smp_wmb() guarantees page flags of tail pages
are visible before the tail page becomes non-compound. smp_wmb() should
be paired with smp_rmb() in softleaf_to_folio(), which is missed. As a
result, if zap_nonpresent_ptes() accesses migration entry that stores tail
pfn, softleaf_to_folio() may see the updated compound_head of tail page
before page->flags.
This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio()
because of the race between folio split and zap_nonpresent_ptes()
leading to a folio incorrectly undergoing modification without a folio
lock being held.
This is a BUG_ON() before commit 93976a20345b ("mm: eliminate further
swapops predicates"), which in merged in v6.19-rc1.
To fix it, add missing smp_rmb() if the softleaf entry is migration entry
in softleaf_to_folio() and softleaf_to_page().
[tujinjiang@huawei.com: update function name and comments] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: prevent immediate PASID reuse case
PASID resue could cause interrupt issue when process
immediately runs into hw state left by previous
process exited with the same PASID, it's possible that
page faults are still pending in the IH ring buffer when
the process exits and frees up its PASID. To prevent the
case, it uses idr cyclic allocator same as kernel pid's.
(cherry picked from commit 8f1de51f49be692de137c8525106e0fce2d1912d) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/pagewalk: fix race between concurrent split and refault
The splitting of a PUD entry in walk_pud_range() can race with a
concurrent thread refaulting the PUD leaf entry causing it to try walking
a PMD range that has disappeared.
An example and reproduction of this is to try reading numa_maps of a
process while VFIO-PCI is setting up DMA (specifically the
vfio_pin_pages_remote call) on a large BAR for that process.
This will trigger a kernel BUG:
vfio-pci 0000:03:00.0: enabling device (0000 -> 0002)
BUG: unable to handle page fault for address: ffffa23980000000
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
...
RIP: 0010:walk_pgd_range+0x3b5/0x7a0
Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24
28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06
9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74
RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287
RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff
RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0
RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000
R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000
R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000
FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
__walk_page_range+0x195/0x1b0
walk_page_vma+0x62/0xc0
show_numa_map+0x12b/0x3b0
seq_read_iter+0x297/0x440
seq_read+0x11d/0x140
vfs_read+0xc2/0x340
ksys_read+0x5f/0xe0
do_syscall_64+0x68/0x130
? get_page_from_freelist+0x5c2/0x17e0
? mas_store_prealloc+0x17e/0x360
? vma_set_page_prot+0x4c/0xa0
? __alloc_pages_noprof+0x14e/0x2d0
? __mod_memcg_lruvec_state+0x8d/0x140
? __lruvec_stat_mod_folio+0x76/0xb0
? __folio_mod_stat+0x26/0x80
? do_anonymous_page+0x705/0x900
? __handle_mm_fault+0xa8d/0x1000
? __count_memcg_events+0x53/0xf0
? handle_mm_fault+0xa5/0x360
? do_user_addr_fault+0x342/0x640
? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0
? irqentry_exit_to_user_mode+0x24/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fe88464f47e
Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f
84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00
f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28
RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e
RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003
RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000
R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
</TASK>
Fix this by validating the PUD entry in walk_pmd_range() using a stable
snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the
walk via ACTION_AGAIN instead of descending further. This mirrors the
retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the
PTE is not being got by pte_offset_map_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: stop reclaim before pushing AIL during unmount
The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while
background reclaim and inodegc are still running. This is broken
independently of any use-after-free issues - background reclaim and
inodegc should not be running while the AIL is being pushed during
unmount, as inodegc can dirty and insert inodes into the AIL during the
flush, and background reclaim can race to abort and free dirty inodes.
Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background
reclaim before pushing the AIL. Stop inodegc before cancelling
m_reclaim_work because the inodegc worker can re-queue m_reclaim_work
via xfs_inodegc_set_reclaimable. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_hfsc: fix divide-by-zero in rtsc_min()
m2sm() converts a u32 slope to a u64 scaled value. For large inputs
(e.g. m1=4000000000), the result can reach 2^32. rtsc_min() stores
the difference of two such u64 values in a u32 variable `dsm` and
uses it as a divisor. When the difference is exactly 2^32 the
truncation yields zero, causing a divide-by-zero oops in the
concave-curve intersection path:
Oops: divide error: 0000
RIP: 0010:rtsc_min (net/sched/sch_hfsc.c:601)
Call Trace:
init_ed (net/sched/sch_hfsc.c:629)
hfsc_enqueue (net/sched/sch_hfsc.c:1569)
[...]
Widen `dsm` to u64 and replace do_div() with div64_u64() so the full
difference is preserved. |
| In the Linux kernel, the following vulnerability has been resolved:
PM: runtime: Fix a race condition related to device removal
The following code in pm_runtime_work() may dereference the dev->parent
pointer after the parent device has been freed:
/* Maybe the parent is now able to suspend. */
if (parent && !parent->power.ignore_children) {
spin_unlock(&dev->power.lock);
spin_lock(&parent->power.lock);
rpm_idle(parent, RPM_ASYNC);
spin_unlock(&parent->power.lock);
spin_lock(&dev->power.lock);
}
Fix this by inserting a flush_work() call in pm_runtime_remove().
Without this patch blktest block/001 triggers the following complaint
sporadically:
BUG: KASAN: slab-use-after-free in lock_acquire+0x70/0x160
Read of size 1 at addr ffff88812bef7198 by task kworker/u553:1/3081
Workqueue: pm pm_runtime_work
Call Trace:
<TASK>
dump_stack_lvl+0x61/0x80
print_address_description.constprop.0+0x8b/0x310
print_report+0xfd/0x1d7
kasan_report+0xd8/0x1d0
__kasan_check_byte+0x42/0x60
lock_acquire.part.0+0x38/0x230
lock_acquire+0x70/0x160
_raw_spin_lock+0x36/0x50
rpm_suspend+0xc6a/0xfe0
rpm_idle+0x578/0x770
pm_runtime_work+0xee/0x120
process_one_work+0xde3/0x1410
worker_thread+0x5eb/0xfe0
kthread+0x37b/0x480
ret_from_fork+0x6cb/0x920
ret_from_fork_asm+0x11/0x20
</TASK>
Allocated by task 4314:
kasan_save_stack+0x2a/0x50
kasan_save_track+0x18/0x40
kasan_save_alloc_info+0x3d/0x50
__kasan_kmalloc+0xa0/0xb0
__kmalloc_noprof+0x311/0x990
scsi_alloc_target+0x122/0xb60 [scsi_mod]
__scsi_scan_target+0x101/0x460 [scsi_mod]
scsi_scan_channel+0x179/0x1c0 [scsi_mod]
scsi_scan_host_selected+0x259/0x2d0 [scsi_mod]
store_scan+0x2d2/0x390 [scsi_mod]
dev_attr_store+0x43/0x80
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3ef/0x670
vfs_write+0x506/0x1470
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x213/0x1810
do_syscall_64+0xee/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 4314:
kasan_save_stack+0x2a/0x50
kasan_save_track+0x18/0x40
kasan_save_free_info+0x3f/0x50
__kasan_slab_free+0x67/0x80
kfree+0x225/0x6c0
scsi_target_dev_release+0x3d/0x60 [scsi_mod]
device_release+0xa3/0x220
kobject_cleanup+0x105/0x3a0
kobject_put+0x72/0xd0
put_device+0x17/0x20
scsi_device_dev_release+0xacf/0x12c0 [scsi_mod]
device_release+0xa3/0x220
kobject_cleanup+0x105/0x3a0
kobject_put+0x72/0xd0
put_device+0x17/0x20
scsi_device_put+0x7f/0xc0 [scsi_mod]
sdev_store_delete+0xa5/0x120 [scsi_mod]
dev_attr_store+0x43/0x80
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3ef/0x670
vfs_write+0x506/0x1470
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x213/0x1810 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent concurrent access to IPSec ASO context
The query or updating IPSec offload object is through Access ASO WQE.
The driver uses a single mlx5e_ipsec_aso struct for each PF, which
contains a shared DMA-mapped context for all ASO operations.
A race condition exists because the ASO spinlock is released before
the hardware has finished processing WQE. If a second operation is
initiated immediately after, it overwrites the shared context in the
DMA area.
When the first operation's completion is processed later, it reads
this corrupted context, leading to unexpected behavior and incorrect
results.
This commit fixes the race by introducing a private context within
each IPSec offload object. The shared ASO context is now copied to
this private context while the ASO spinlock is held. Subsequent
processing uses this saved, per-object context, ensuring its integrity
is maintained. |
| In the Linux kernel, the following vulnerability has been resolved:
net: shaper: protect from late creation of hierarchy
We look up a netdev during prep of Netlink ops (pre- callbacks)
and take a ref to it. Then later in the body of the callback
we take its lock or RCU which are the actual protections.
The netdev may get unregistered in between the time we take
the ref and the time we lock it. We may allocate the hierarchy
after flush has already run, which would lead to a leak.
Take the instance lock in pre- already, this saves us from the race
and removes the need for dedicated lock/unlock callbacks completely.
After all, if there's any chance of write happening concurrently
with the flush - we're back to leaking the hierarchy.
We may take the lock for devices which don't support shapers but
we're only dealing with SET operations here, not taking the lock
would be optimizing for an error case. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: ets: fix divide by zero in the offload path
Offloading ETS requires computing each class' WRR weight: this is done by
averaging over the sums of quanta as 'q_sum' and 'q_psum'. Using unsigned
int, the same integer size as the individual DRR quanta, can overflow and
even cause division by zero, like it happened in the following splat:
Oops: divide error: 0000 [#1] SMP PTI
CPU: 13 UID: 0 PID: 487 Comm: tc Tainted: G E 6.19.0-virtme #45 PREEMPT(full)
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets]
Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44
RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246
RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660
RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe
R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000
FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0
Call Trace:
<TASK>
ets_qdisc_change+0x870/0xf40 [sch_ets]
qdisc_create+0x12b/0x540
tc_modify_qdisc+0x6d7/0xbd0
rtnetlink_rcv_msg+0x168/0x6b0
netlink_rcv_skb+0x5c/0x110
netlink_unicast+0x1d6/0x2b0
netlink_sendmsg+0x22e/0x470
____sys_sendmsg+0x38a/0x3c0
___sys_sendmsg+0x99/0xe0
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x111/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f440b81c77e
Code: 4d 89 d8 e8 d4 bc 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 <c9> c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa
RSP: 002b:00007fff951e4c10 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000481820 RCX: 00007f440b81c77e
RDX: 0000000000000000 RSI: 00007fff951e4cd0 RDI: 0000000000000003
RBP: 00007fff951e4c20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff951f4fa8
R13: 00000000699ddede R14: 00007f440bb01000 R15: 0000000000486980
</TASK>
Modules linked in: sch_ets(E) netdevsim(E)
---[ end trace 0000000000000000 ]---
RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets]
Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44
RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246
RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660
RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe
R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000
FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x30000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]---
Fix this using 64-bit integers for 'q_sum' and 'q_psum'. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: Revert "i2c: i801: replace acpi_lock with I2C bus lock"
This reverts commit f707d6b9e7c18f669adfdb443906d46cfbaaa0c1.
Under rare circumstances, multiple udev threads can collect i801 device
info on boot and walk i801_acpi_io_handler somewhat concurrently. The
first will note the area is reserved by acpi to prevent further touches.
This ultimately causes the area to be deregistered. The second will
enter i801_acpi_io_handler after the area is unregistered but before a
check can be made that the area is unregistered. i2c_lock_bus relies on
the now unregistered area containing lock_ops to lock the bus. The end
result is a kernel panic on boot with the following backtrace;
[ 14.971872] ioatdma 0000:09:00.2: enabling device (0100 -> 0102)
[ 14.971873] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 14.971880] #PF: supervisor read access in kernel mode
[ 14.971884] #PF: error_code(0x0000) - not-present page
[ 14.971887] PGD 0 P4D 0
[ 14.971894] Oops: 0000 [#1] PREEMPT SMP PTI
[ 14.971900] CPU: 5 PID: 956 Comm: systemd-udevd Not tainted 5.14.0-611.5.1.el9_7.x86_64 #1
[ 14.971905] Hardware name: XXXXXXXXXXXXXXXXXXXXXXX BIOS 1.20.10.SV91 01/30/2023
[ 14.971908] RIP: 0010:i801_acpi_io_handler+0x2d/0xb0 [i2c_i801]
[ 14.971929] Code: 00 00 49 8b 40 20 41 57 41 56 4d 8b b8 30 04 00 00 49 89 ce 41 55 41 89 d5 41 54 49 89 f4 be 02 00 00 00 55 4c 89 c5 53 89 fb <48> 8b 00 4c 89 c7 e8 18 61 54 e9 80 bd 80 04 00 00 00 75 09 4c 3b
[ 14.971933] RSP: 0018:ffffbaa841483838 EFLAGS: 00010282
[ 14.971938] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9685e01ba568
[ 14.971941] RDX: 0000000000000008 RSI: 0000000000000002 RDI: 0000000000000000
[ 14.971944] RBP: ffff9685ca22f028 R08: ffff9685ca22f028 R09: ffff9685ca22f028
[ 14.971948] R10: 000000000000000b R11: 0000000000000580 R12: 0000000000000580
[ 14.971951] R13: 0000000000000008 R14: ffff9685e01ba568 R15: ffff9685c222f000
[ 14.971954] FS: 00007f8287c0ab40(0000) GS:ffff96a47f940000(0000) knlGS:0000000000000000
[ 14.971959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 14.971963] CR2: 0000000000000000 CR3: 0000000168090001 CR4: 00000000003706f0
[ 14.971966] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 14.971968] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 14.971972] Call Trace:
[ 14.971977] <TASK>
[ 14.971981] ? show_trace_log_lvl+0x1c4/0x2df
[ 14.971994] ? show_trace_log_lvl+0x1c4/0x2df
[ 14.972003] ? acpi_ev_address_space_dispatch+0x16e/0x3c0
[ 14.972014] ? __die_body.cold+0x8/0xd
[ 14.972021] ? page_fault_oops+0x132/0x170
[ 14.972028] ? exc_page_fault+0x61/0x150
[ 14.972036] ? asm_exc_page_fault+0x22/0x30
[ 14.972045] ? i801_acpi_io_handler+0x2d/0xb0 [i2c_i801]
[ 14.972061] acpi_ev_address_space_dispatch+0x16e/0x3c0
[ 14.972069] ? __pfx_i801_acpi_io_handler+0x10/0x10 [i2c_i801]
[ 14.972085] acpi_ex_access_region+0x5b/0xd0
[ 14.972093] acpi_ex_field_datum_io+0x73/0x2e0
[ 14.972100] acpi_ex_read_data_from_field+0x8e/0x230
[ 14.972106] acpi_ex_resolve_node_to_value+0x23d/0x310
[ 14.972114] acpi_ds_evaluate_name_path+0xad/0x110
[ 14.972121] acpi_ds_exec_end_op+0x321/0x510
[ 14.972127] acpi_ps_parse_loop+0xf7/0x680
[ 14.972136] acpi_ps_parse_aml+0x17a/0x3d0
[ 14.972143] acpi_ps_execute_method+0x137/0x270
[ 14.972150] acpi_ns_evaluate+0x1f4/0x2e0
[ 14.972158] acpi_evaluate_object+0x134/0x2f0
[ 14.972164] acpi_evaluate_integer+0x50/0xe0
[ 14.972173] ? vsnprintf+0x24b/0x570
[ 14.972181] acpi_ac_get_state.part.0+0x23/0x70
[ 14.972189] get_ac_property+0x4e/0x60
[ 14.972195] power_supply_show_property+0x90/0x1f0
[ 14.972205] add_prop_uevent+0x29/0x90
[ 14.972213] power_supply_uevent+0x109/0x1d0
[ 14.972222] dev_uevent+0x10e/0x2f0
[ 14.972228] uevent_show+0x8e/0x100
[ 14.972236] dev_attr_show+0x19
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
cxl: Fix race of nvdimm_bus object when creating nvdimm objects
Found issue during running of cxl-translate.sh unit test. Adding a 3s
sleep right before the test seems to make the issue reproduce fairly
consistently. The cxl_translate module has dependency on cxl_acpi and
causes orphaned nvdimm objects to reprobe after cxl_acpi is removed.
The nvdimm_bus object is registered by the cxl_nvb object when
cxl_acpi_probe() is called. With the nvdimm_bus object missing,
__nd_device_register() will trigger NULL pointer dereference when
accessing the dev->parent that points to &nvdimm_bus->dev.
[ 192.884510] BUG: kernel NULL pointer dereference, address: 000000000000006c
[ 192.895383] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20250812-19.fc42 08/12/2025
[ 192.897721] Workqueue: cxl_port cxl_bus_rescan_queue [cxl_core]
[ 192.899459] RIP: 0010:kobject_get+0xc/0x90
[ 192.924871] Call Trace:
[ 192.925959] <TASK>
[ 192.926976] ? pm_runtime_init+0xb9/0xe0
[ 192.929712] __nd_device_register.part.0+0x4d/0xc0 [libnvdimm]
[ 192.933314] __nvdimm_create+0x206/0x290 [libnvdimm]
[ 192.936662] cxl_nvdimm_probe+0x119/0x1d0 [cxl_pmem]
[ 192.940245] cxl_bus_probe+0x1a/0x60 [cxl_core]
[ 192.943349] really_probe+0xde/0x380
This patch also relies on the previous change where
devm_cxl_add_nvdimm_bridge() is called from drivers/cxl/pmem.c instead
of drivers/cxl/core.c to ensure the dependency of cxl_acpi on cxl_pmem.
1. Set probe_type of cxl_nvb to PROBE_FORCE_SYNCHRONOUS to ensure the
driver is probed synchronously when add_device() is called.
2. Add a check in __devm_cxl_add_nvdimm_bridge() to ensure that the
cxl_nvb driver is attached during cxl_acpi_probe().
3. Take the cxl_root uport_dev lock and the cxl_nvb->dev lock in
devm_cxl_add_nvdimm() before checking nvdimm_bus is valid.
4. Set cxl_nvdimm flag to CXL_NVD_F_INVALIDATED so cxl_nvdimm_probe()
will exit with -EBUSY.
The removal of cxl_nvdimm devices should prevent any orphaned devices
from probing once the nvdimm_bus is gone.
[ dj: Fixed 0-day reported kdoc issue. ]
[ dj: Fix cxl_nvb reference leak on error. Gregory (kreview-0811365) ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: annotate data-races around sk->sk_{data_ready,write_space}
skmsg (and probably other layers) are changing these pointers
while other cpus might read them concurrently.
Add corresponding READ_ONCE()/WRITE_ONCE() annotations
for UDP, TCP and AF_UNIX. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add proper RCU protection to /proc/net/ptype
Yin Fengwei reported an RCU stall in ptype_seq_show() and provided
a patch.
Real issue is that ptype_seq_next() and ptype_seq_show() violate
RCU rules.
ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev
to get device name without any barrier.
At the same time, concurrent writers can remove a packet_type structure
(which is correctly freed after an RCU grace period) and clear pt->dev
without an RCU grace period.
Define ptype_iter_state to carry a dev pointer along seq_net_private:
struct ptype_iter_state {
struct seq_net_private p;
struct net_device *dev; // added in this patch
};
We need to record the device pointer in ptype_get_idx() and
ptype_seq_next() so that ptype_seq_show() is safe against
concurrent pt->dev changes.
We also need to add full RCU protection in ptype_seq_next().
(Missing READ_ONCE() when reading list.next values)
Many thanks to Dong Chenchen for providing a repro. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: tegra210-quad: Protect curr_xfer check in IRQ handler
Now that all other accesses to curr_xfer are done under the lock,
protect the curr_xfer NULL check in tegra_qspi_isr_thread() with the
spinlock. Without this protection, the following race can occur:
CPU0 (ISR thread) CPU1 (timeout path)
---------------- -------------------
if (!tqspi->curr_xfer)
// sees non-NULL
spin_lock()
tqspi->curr_xfer = NULL
spin_unlock()
handle_*_xfer()
spin_lock()
t = tqspi->curr_xfer // NULL!
... t->len ... // NULL dereference!
With this patch, all curr_xfer accesses are now properly synchronized.
Although all accesses to curr_xfer are done under the lock, in
tegra_qspi_isr_thread() it checks for NULL, releases the lock and
reacquires it later in handle_cpu_based_xfer()/handle_dma_based_xfer().
There is a potential for an update in between, which could cause a NULL
pointer dereference.
To handle this, add a NULL check inside the handlers after acquiring
the lock. This ensures that if the timeout path has already cleared
curr_xfer, the handler will safely return without dereferencing the
NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix data-race warning and potential load/store tearing
Fix the following:
BUG: KCSAN: data-race in rxrpc_peer_keepalive_worker / rxrpc_send_data_packet
which is reporting an issue with the reads and writes to ->last_tx_at in:
conn->peer->last_tx_at = ktime_get_seconds();
and:
keepalive_at = peer->last_tx_at + RXRPC_KEEPALIVE_TIME;
The lockless accesses to these to values aren't actually a problem as the
read only needs an approximate time of last transmission for the purposes
of deciding whether or not the transmission of a keepalive packet is
warranted yet.
Also, as ->last_tx_at is a 64-bit value, tearing can occur on a 32-bit
arch.
Fix both of these by switching to an unsigned int for ->last_tx_at and only
storing the LSW of the time64_t. It can then be reconstructed at need
provided no more than 68 years has elapsed since the last transmission. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: Drop the MHI auto_queue feature for IPCR DL channels
MHI stack offers the 'auto_queue' feature, which allows the MHI stack to
auto queue the buffers for the RX path (DL channel). Though this feature
simplifies the client driver design, it introduces race between the client
drivers and the MHI stack. For instance, with auto_queue, the 'dl_callback'
for the DL channel may get called before the client driver is fully probed.
This means, by the time the dl_callback gets called, the client driver's
structures might not be initialized, leading to NULL ptr dereference.
Currently, the drivers have to workaround this issue by initializing the
internal structures before calling mhi_prepare_for_transfer_autoqueue().
But even so, there is a chance that the client driver's internal code path
may call the MHI queue APIs before mhi_prepare_for_transfer_autoqueue() is
called, leading to similar NULL ptr dereference. This issue has been
reported on the Qcom X1E80100 CRD machines affecting boot.
So to properly fix all these races, drop the MHI 'auto_queue' feature
altogether and let the client driver (QRTR) manage the RX buffers manually.
In the QRTR driver, queue the RX buffers based on the ring length during
probe and recycle the buffers in 'dl_callback' once they are consumed. This
also warrants removing the setting of 'auto_queue' flag from controller
drivers.
Currently, this 'auto_queue' feature is only enabled for IPCR DL channel.
So only the QRTR client driver requires the modification. |
| In the Linux kernel, the following vulnerability has been resolved:
timers: Fix NULL function pointer race in timer_shutdown_sync()
There is a race condition between timer_shutdown_sync() and timer
expiration that can lead to hitting a WARN_ON in expire_timers().
The issue occurs when timer_shutdown_sync() clears the timer function
to NULL while the timer is still running on another CPU. The race
scenario looks like this:
CPU0 CPU1
<SOFTIRQ>
lock_timer_base()
expire_timers()
base->running_timer = timer;
unlock_timer_base()
[call_timer_fn enter]
mod_timer()
...
timer_shutdown_sync()
lock_timer_base()
// For now, will not detach the timer but only clear its function to NULL
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
[call_timer_fn exit]
lock_timer_base()
base->running_timer = NULL;
unlock_timer_base()
...
// Now timer is pending while its function set to NULL.
// next timer trigger
<SOFTIRQ>
expire_timers()
WARN_ON_ONCE(!fn) // hit
...
lock_timer_base()
// Now timer will detach
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
The problem is that timer_shutdown_sync() clears the timer function
regardless of whether the timer is currently running. This can leave a
pending timer with a NULL function pointer, which triggers the
WARN_ON_ONCE(!fn) check in expire_timers().
Fix this by only clearing the timer function when actually detaching the
timer. If the timer is running, leave the function pointer intact, which is
safe because the timer will be properly detached when it finishes running. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/reclaim: avoid divide-by-zero in damon_reclaim_apply_parameters()
When creating a new scheme of DAMON_RECLAIM, the calculation of
'min_age_region' uses 'aggr_interval' as the divisor, which may lead to
division-by-zero errors. Fix it by directly returning -EINVAL when such a
case occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix potential warning in trace_printk_seq during ftrace_dump
When calling ftrace_dump_one() concurrently with reading trace_pipe,
a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race
condition.
The issue occurs because:
CPU0 (ftrace_dump) CPU1 (reader)
echo z > /proc/sysrq-trigger
!trace_empty(&iter)
trace_iterator_reset(&iter) <- len = size = 0
cat /sys/kernel/tracing/trace_pipe
trace_find_next_entry_inc(&iter)
__find_next_entry
ring_buffer_empty_cpu <- all empty
return NULL
trace_printk_seq(&iter.seq)
WARN_ON_ONCE(s->seq.len >= s->seq.size)
In the context between trace_empty() and trace_find_next_entry_inc()
during ftrace_dump, the ring buffer data was consumed by other readers.
This caused trace_find_next_entry_inc to return NULL, failing to populate
`iter.seq`. At this point, due to the prior trace_iterator_reset, both
`iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal,
the WARN_ON_ONCE condition is triggered.
Move the trace_printk_seq() into the if block that checks to make sure the
return value of trace_find_next_entry_inc() is non-NULL in
ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before
subsequent operations. |
