| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: af_key: zero aligned sockaddr tail in PF_KEY exports
PF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddr
payload space, so IPv6 addresses occupy 32 bytes on the wire. However,
`pfkey_sockaddr_fill()` initializes only the first 28 bytes of
`struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized.
Not every PF_KEY message is affected. The state and policy dump builders
already zero the whole message buffer before filling the sockaddr
payloads. Keep the fix to the export paths that still append aligned
sockaddr payloads with plain `skb_put()`:
- `SADB_ACQUIRE`
- `SADB_X_NAT_T_NEW_MAPPING`
- `SADB_X_MIGRATE`
Fix those paths by clearing only the aligned sockaddr tail after
`pfkey_sockaddr_fill()`. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator
When batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send()
appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload via
nlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put()
helper only zeroes alignment padding after the payload, not the payload
itself, so four bytes of stale kernel heap data are leaked to userspace
in the NLMSG_DONE message body.
Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializes
the nfgenmsg payload via nfnl_fill_hdr(), consistent with how
__build_packet_message() already constructs NFULNL_MSG_PACKET headers. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/uncore: Skip discovery table for offline dies
This warning can be triggered if NUMA is disabled and the system
boots with fewer CPUs than the number of CPUs in die 0.
WARNING: CPU: 9 PID: 7257 at uncore.c:1157 uncore_pci_pmu_register+0x136/0x160 [intel_uncore]
Currently, the discovery table continues to be parsed even if all CPUs
in the associated die are offline. This can lead to an array overflow
at "pmu->boxes[die] = box" in uncore_pci_pmu_register(), which may
trigger the warning above or cause other issues. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Fix minimum RX size check for decryption
The check for the minimum receive buffer size did not take the
tag size into account during decryption. Fix this by adding the
required extra length. |
| In the Linux kernel, the following vulnerability has been resolved:
x86-64: rename misleadingly named '__copy_user_nocache()' function
This function was a masterclass in bad naming, for various historical
reasons.
It claimed to be a non-cached user copy. It is literally _neither_ of
those things. It's a specialty memory copy routine that uses
non-temporal stores for the destination (but not the source), and that
does exception handling for both source and destination accesses.
Also note that while it works for unaligned targets, any unaligned parts
(whether at beginning or end) will not use non-temporal stores, since
only words and quadwords can be non-temporal on x86.
The exception handling means that it _can_ be used for user space
accesses, but not on its own - it needs all the normal "start user space
access" logic around it.
But typically the user space access would be the source, not the
non-temporal destination. That was the original intention of this,
where the destination was some fragile persistent memory target that
needed non-temporal stores in order to catch machine check exceptions
synchronously and deal with them gracefully.
Thus that non-descriptive name: one use case was to copy from user space
into a non-cached kernel buffer. However, the existing users are a mix
of that intended use-case, and a couple of random drivers that just did
this as a performance tweak.
Some of those random drivers then actively misused the user copying
version (with STAC/CLAC and all) to do kernel copies without ever even
caring about the exception handling, _just_ for the non-temporal
destination.
Rename it as a first small step to actually make it halfway sane, and
change the prototype to be more normal: it doesn't take a user pointer
unless the caller has done the proper conversion, and the argument size
is the full size_t (it still won't actually copy more than 4GB in one
go, but there's also no reason to silently truncate the size argument in
the caller).
Finally, use this now sanely named function in the NTB code, which
mis-used a user copy version (with STAC/CLAC and all) of this interface
despite it not actually being a user copy at all. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: always drain queued discard work in ext4_mb_release()
While reviewing recent ext4 patch[1], Sashiko raised the following
concern[2]:
> If the filesystem is initially mounted with the discard option,
> deleting files will populate sbi->s_discard_list and queue
> s_discard_work. If it is then remounted with nodiscard, the
> EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is
> neither cancelled nor flushed.
[1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/
[2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev
The concern was valid, but it had nothing to do with the patch[1].
One of the problems with Sashiko in its current (early) form is that
it will detect pre-existing issues and report it as a problem with the
patch that it is reviewing.
In practice, it would be hard to hit deliberately (unless you are a
malicious syzkaller fuzzer), since it would involve mounting the file
system with -o discard, and then deleting a large number of files,
remounting the file system with -o nodiscard, and then immediately
unmounting the file system before the queued discard work has a change
to drain on its own.
Fix it because it's a real bug, and to avoid Sashiko from raising this
concern when analyzing future patches to mballoc.c. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix not releasing workqueue on .release()
The workqueue associated with an DSA/IAA device is not released when
the object is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: check tdls flag in ieee80211_tdls_oper
When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the
station exists but not whether it is actually a TDLS station. This
allows the operation to proceed for non-TDLS stations, causing
unintended side effects like modifying channel context and HT
protection before failing.
Add a check for sta->sta.tdls early in the ENABLE_LINK case, before
any side effects occur, to ensure the operation is only allowed for
actual TDLS peers. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: set backing store type from query type
bnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from the
firmware response in ctxm->type and later uses that value to index
fixed backing-store metadata arrays such as ctx_arr[] and
bnxt_bstore_to_trace[].
ctxm->type is fixed by the current backing-store query type and matches
the array index of ctx->ctx_arr. Set ctxm->type from the current loop
variable instead of depending on resp->type.
Also update the loop to advance type from next_valid_type in the for
statement, which keeps the control flow simpler for non-valid and
unchanged entries. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent
ctnetlink_alloc_expect() allocates expectations from a non-zeroing
slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not
present in the netlink message, saved_addr and saved_proto are
never initialized. Stale data from a previous slab occupant can
then be dumped to userspace by ctnetlink_exp_dump_expect(), which
checks these fields to decide whether to emit CTA_EXPECT_NAT.
The safe sibling nf_ct_expect_init(), used by the packet path,
explicitly zeroes these fields.
Zero saved_addr, saved_proto and dir in the else branch, guarded
by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when
NAT is enabled.
Confirmed by priming the expect slab with NAT-bearing expectations,
freeing them, creating a new expectation without CTA_EXPECT_NAT,
and observing that the ctnetlink dump emits a spurious
CTA_EXPECT_NAT containing stale data from the prior allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: reject immediate NF_QUEUE verdict
nft_queue is always used from userspace nftables to deliver the NF_QUEUE
verdict. Immediately emitting an NF_QUEUE verdict is never used by the
userspace nft tools, so reject immediate NF_QUEUE verdicts.
The arp family does not provide queue support, but such an immediate
verdict is still reachable. Globally reject NF_QUEUE immediate verdicts
to address this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hci_cmd_sync_queue_once() return -EEXIST if exists
hci_cmd_sync_queue_once() needs to indicate whether a queue item was
added, so caller can know if callbacks are called, so it can avoid
leaking resources.
Change the function to return -EEXIST if queue item already exists.
Modify all callsites to handle that. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate mesh send advertising payload length
mesh_send() currently bounds MGMT_OP_MESH_SEND by total command
length, but it never verifies that the bytes supplied for the
flexible adv_data[] array actually match the embedded adv_data_len
field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a
truncated command can still pass the existing 20..50 byte range
check and later drive the async mesh send path past the end of the
queued command buffer.
Keep rejecting zero-length and oversized advertising payloads, but
validate adv_data_len explicitly and require the command length to
exactly match the flexible array size before queueing the request. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix switchdev mode rollback in case of failure
If for some internal reason switchdev mode fails, we rollback to legacy
mode, before this patch, rollback will unregister the uplink netdev and
leave it unregistered causing the below kernel bug.
To fix this, we need to avoid netdev unregister by setting the proper
rollback flag 'MLX5_PRIV_FLAGS_SWITCH_LEGACY' to indicate legacy mode.
devlink (431) used greatest stack depth: 11048 bytes left
mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), \
necvfs(0), active vports(0)
mlx5_core 0000:00:03.0: E-Switch: Supported tc chains and prios offload
mlx5_core 0000:00:03.0: Loading uplink representor for vport 65535
mlx5_core 0000:00:03.0: mlx5_cmd_out_err:816:(pid 456): \
QUERY_HCA_CAP(0x100) op_mod(0x0) failed, \
status bad parameter(0x3), syndrome (0x3a3846), err(-22)
mlx5_core 0000:00:03.0 enp0s3np0 (unregistered): Unloading uplink \
representor for vport 65535
------------[ cut here ]------------
kernel BUG at net/core/dev.c:12070!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 456 Comm: devlink Not tainted 6.16.0-rc3+ \
#9 PREEMPT(voluntary)
RIP: 0010:unregister_netdevice_many_notify+0x123/0xae0
...
Call Trace:
[ 90.923094] unregister_netdevice_queue+0xad/0xf0
[ 90.923323] unregister_netdev+0x1c/0x40
[ 90.923522] mlx5e_vport_rep_unload+0x61/0xc6
[ 90.923736] esw_offloads_enable+0x8e6/0x920
[ 90.923947] mlx5_eswitch_enable_locked+0x349/0x430
[ 90.924182] ? is_mp_supported+0x57/0xb0
[ 90.924376] mlx5_devlink_eswitch_mode_set+0x167/0x350
[ 90.924628] devlink_nl_eswitch_set_doit+0x6f/0xf0
[ 90.924862] genl_family_rcv_msg_doit+0xe8/0x140
[ 90.925088] genl_rcv_msg+0x18b/0x290
[ 90.925269] ? __pfx_devlink_nl_pre_doit+0x10/0x10
[ 90.925506] ? __pfx_devlink_nl_eswitch_set_doit+0x10/0x10
[ 90.925766] ? __pfx_devlink_nl_post_doit+0x10/0x10
[ 90.926001] ? __pfx_genl_rcv_msg+0x10/0x10
[ 90.926206] netlink_rcv_skb+0x52/0x100
[ 90.926393] genl_rcv+0x28/0x40
[ 90.926557] netlink_unicast+0x27d/0x3d0
[ 90.926749] netlink_sendmsg+0x1f7/0x430
[ 90.926942] __sys_sendto+0x213/0x220
[ 90.927127] ? __sys_recvmsg+0x6a/0xd0
[ 90.927312] __x64_sys_sendto+0x24/0x30
[ 90.927504] do_syscall_64+0x50/0x1c0
[ 90.927687] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 90.927929] RIP: 0033:0x7f7d0363e047 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject sleepable kprobe_multi programs at attach time
kprobe.multi programs run in atomic/RCU context and cannot sleep.
However, bpf_kprobe_multi_link_attach() did not validate whether the
program being attached had the sleepable flag set, allowing sleepable
helpers such as bpf_copy_from_user() to be invoked from a non-sleepable
context.
This causes a "sleeping function called from invalid context" splat:
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 0
Fix this by rejecting sleepable programs early in
bpf_kprobe_multi_link_attach(), before any further processing. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pxp: Clear restart flag in pxp_start after jumping back
If we don't clear the flag we'll keep jumping back at the beginning of
the function once we reach the end.
(cherry picked from commit 0850ec7bb2459602351639dccf7a68a03c9d1ee0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ioc32: stop speculation on the drm_compat_ioctl path
The drm compat ioctl path takes a user controlled pointer, and then
dereferences it into a table of function pointers, the signature method
of spectre problems. Fix this up by calling array_index_nospec() on the
index to the function pointer list. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Check the error for index mapping
The ctxfi driver blindly assumed a proper value returned from
daio_device_index(), but it's not always true. Add a proper error
check to deal with the error from the function. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Don't enumerate SPDIF1 at DAIO initialization
The recent refactoring of xfi driver changed the assignment of
atc->daios[] at atc_get_resources(); now it loops over all enum
DAIOTYP entries while it looped formerly only a part of them.
The problem is that the last entry, SPDIF1, is a special type that
is used only for hw20k1 CTSB073X model (as a replacement of SPDIFIO),
and there is no corresponding definition for hw20k2. Due to the lack
of the info, it caused a kernel crash on hw20k2, which was already
worked around by the commit b045ab3dff97 ("ALSA: ctxfi: Fix missing
SPDIFI1 index handling").
This patch addresses the root cause of the regression above properly,
simply by skipping the incorrect SPDIF1 type in the parser loop.
For making the change clearer, the code is slightly arranged, too. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: br_nd_send: validate ND option lengths
br_nd_send() walks ND options according to option-provided lengths.
A malformed option can make the parser advance beyond the computed
option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address. |
