| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Bridge is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| IBM Bob 1.0.4 through 2.0.1 could allow a remote attacker to inject arbitrary code on the system, due to the improper control of user input code. |
| The RTIO submission-queue verifier rtio_vrfy_sqe() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) accumulated the results of K_SYSCALL_MEMORY() into its valid_sqe flag with &=. That macro returns nonzero on failure (it is built on K_SYSCALL_VERIFY_MSG(), which yields !(expr)), so every buffer permission check contributed the opposite of its result. A submission whose tx.buf, rx.buf or txrx.tx_buf/txrx.rx_buf pointer was not accessible to the calling thread was accepted, while a legitimate, thread-owned buffer caused the calling thread to be killed with a kernel oops.
The verifier runs on behalf of the rtio_sqe_copy_in_get_handles() system call (also reached through the inline rtio_sqe_copy_in() wrapper), so it is driven directly by untrusted user-mode input on any image built with CONFIG_USERSPACE. A user thread that has been granted an RTIO context and an rtio_iodev object — the intended usage of RTIO userspace support, established via rtio_access_grant() — can submit an SQE whose buffer pointer and length name arbitrary kernel memory; the object check on sqe->iodev is unaffected and still passes, and the crafted SQE is forwarded to the bus driver unchanged.
Downstream consumers dereference the pointer with supervisor privilege. The generic I2C and I3C RTIO fallback handlers (drivers/i2c/i2c_rtio_default.c, drivers/i3c/i3c_rtio_default.c) copy sqe.rx.buf/sqe.tx.buf into struct i2c_msg and call i2c_transfer(), and the vendor SPI/I2C RTIO drivers behave equivalently. An RTIO_OP_RX submission therefore has peripheral data written into kernel memory of the attacker's choosing (arbitrary kernel write), an RTIO_OP_TX submission clocks kernel memory out over the bus (kernel memory disclosure), and a pointer to unmapped memory faults the kernel. This is a full escape from the user-mode isolation boundary that CONFIG_USERSPACE exists to enforce.
The defect was masked for years because the in-tree user-mode RTIO tests only exercise RTIO_OP_NOP and mempool-backed reads, neither of which reaches the affected checks. The fix negates each K_SYSCALL_MEMORY() result and additionally validates the TXRX transmit buffer read-only, matching the SPI, I2C and I3C handlers. |
| The nRF link-layer receive paths of the open-source Bluetooth LE Controller did not validate the on-air LENGTH field of a received PDU against the maximum receive length that was used to program the radio. isr_rx_pdu() in subsys/bluetooth/controller/ll_sw/nordic/lll/lll_conn.c enqueued any non-empty data PDU after only the sequence-number and (for encrypted links) MIC checks, and the corresponding isr_rx() handlers in lll_central_iso.c, lll_peripheral_iso.c, lll_sync_iso.c and lll_scan_aux.c did the same for ISO and extended-advertising PDUs. The nRF radio stores the received header verbatim and truncates only the payload at PCNF1.MAXLEN, so a frame declaring more octets than were configured leaves a node buffer whose len field describes more data than the buffer holds.
An attacker within radio range that can emit a hand-crafted link-layer PDU — for a connection, any peer that establishes an unencrypted LE connection to a connectable advertiser; for CONFIG_BT_CTLR_SYNC_ISO, any broadcaster the device is synchronised to — can set the length byte up to 255 while the controller has programmed a much smaller maximum (lll->dle.eff.max_rx_octets, which is 27 until a Data Length Update, or the negotiated cis_lll->rx.max_pdu). No pairing, authentication or user interaction is required. On encrypted links the CCM MIC check normally rejects such a frame first, so the exposure is on unencrypted traffic, which is why the added check is placed after decryption.
The unchecked length reaches hci_acl_encode() in subsys/bluetooth/controller/hci/hci.c, which performs net_buf_add(buf, pdu_data->len) followed by a memcpy() of that many bytes out of the node_rx pool element. Because CONFIG_BT_CTLR_DATA_LENGTH_MAX and CONFIG_BT_BUF_ACL_RX_SIZE both default to 27, this is an out-of-bounds read of up to roughly 228 bytes past the received PDU and a corresponding out-of-bounds write past the HCI ACL buffer into neighbouring buffers of the same pool; the tailroom test in net_buf_simple_add() is only enforced when CONFIG_NET_BUF_HARDENING (or CONFIG_ASSERT) is enabled. On the ISO paths the same unchecked length makes isoal_rx_append_to_sdu() read past the ISO node buffer and emit adjacent controller RAM to the host as ISO data. The practical result is remote memory corruption and controller crashes, plus disclosure of controller memory into the host data path.
The fix rejects any received PDU whose length exceeds the value that was used to configure the radio reception. Note that lll_sync.c (periodic advertising sync reception) was not changed and still enqueues received PDUs without an equivalent bound. |
| The user-mode syscall verifier z_vrfy_i2s_configure() in drivers/i2s/i2s_handlers.c copies the caller's struct i2s_config in from user memory and then, when cfg->frame_clk_freq is 0 (the API's "unconfigure the stream" request), jumps straight to z_impl_i2s_configure() without performing the K_SYSCALL_OBJ(config.mem_slab, K_OBJ_MEM_SLAB) ownership/type check or the block_size sanity check. The mem_slab field is a struct k_mem_slab *, so on that path a completely unvalidated, user-chosen pointer reaches driver code that is entitled to trust it as a real kernel object.
Any thread running under CONFIG_USERSPACE that has access to an I2S device object can trigger this with a single i2s_configure() call. Most in-tree drivers special-case frame_clk_freq == 0 and never store the caller's structure, but drivers/i2s/i2s_litex.c does not: i2s_litex_configure() only logs a warning for a mismatched frame clock, then memcpy()s the caller's config into stream->cfg and marks the stream I2S_STATE_READY. A subsequent i2s_trigger() with I2S_TRIGGER_START enables the FIFO interrupt, and the interrupt handlers i2s_litex_isr_rx() / i2s_litex_isr_tx() then call k_mem_slab_alloc() and k_mem_slab_free() on the attacker-supplied pointer in supervisor context.
The result is an arbitrary-pointer read/write primitive executed by the kernel on behalf of an unprivileged thread — k_mem_slab_alloc() takes a spinlock at slab->lock and reads and writes slab->free_list and the link word inside the returned "block" — which defeats the CONFIG_USERSPACE isolation boundary entirely. The same missing validation is a hazard for out-of-tree I2S drivers that retain the configuration on the unconfigure path. Builds without CONFIG_USERSPACE are unaffected, since the verifier is not used.
The fix zeroes config.mem_slab and config.block_size on the unconfigure path so the driver can never receive an unvalidated pointer, while still allowing a stream to be unconfigured by a caller that does not own a memory slab, as the API documents. |
| The user-mode verification handler for the i3c_transfer() system call, z_vrfy_i3c_transfer() in drivers/i3c/i3c_handlers.c, validated the caller-supplied struct i3c_device_desc in place instead of snapshotting it. It confirmed only that the descriptor was readable by the calling thread (K_SYSCALL_MEMORY_READ()), read target->bus once to check it with K_SYSCALL_OBJ(), and then passed the caller's live pointer down. The implementation z_impl_i3c_transfer() re-reads target->bus from that user memory and dispatches through it as DEVICE_API_GET(i3c, target->bus)->i3c_xfers(...), so the bus that was validated is not necessarily the bus that is used. DEVICE_API_GET() performs no runtime type check outside CONFIG_DEVICE_API_ASSERT builds.
On a build with CONFIG_USERSPACE and an I3C controller driver, a user thread that has been granted an I3C device object can exploit this with a second thread in the same memory domain: one thread calls i3c_transfer() while the other rewrites the bus field of the descriptor. The window between the check and the use spans the num_msgs validation, the message-array access check, a stack VLA allocation and a memcpy() of up to 32 struct i3c_msg, so the race is repeatable and can simply be retried until it lands.
When the substitution succeeds, the kernel dereferences an attacker-chosen pointer as a struct device, loads a function pointer from the attacker-controlled api table and calls it in supervisor mode with attacker-influenced arguments. This yields kernel-mode code execution from an unprivileged user thread — a complete escape of the userspace memory-protection sandbox; lesser outcomes are an arbitrary two-level kernel read or a kernel fault. Builds without CONFIG_USERSPACE, or without an I3C driver, are unaffected.
The fix copies the descriptor into a kernel-stack local with k_usermode_from_copy(), validates the bus in that copy, and dispatches on the copy, so the validated value is provably the value used. |
| VeraCrypt provides disk encryption with strong security based on TrueCrypt. Prior to 1.26.30, the Unix, macOS, and FreeBSD serialization paths in src/Platform/Serializer.cpp and src/Volume/VolumePassword.cpp accept untrusted length and count values when deserializing data that can cross from the unprivileged GUI or CLI to the root CoreService helper. Serializer::DeserializeWString allocates floor(size / sizeof(wchar_t)) elements but reads size bytes, so a non-aligned size can overflow the heap allocation. VolumePassword::Deserialize accepts PasswordSize values larger than the fixed 128-byte PasswordBuffer, allowing downstream DataPtr() and Size() consumers such as the KDF to read beyond the buffer. DeserializeString, DeserializeWString, and the string and wide-string list readers also lack allocation and collection bounds, which can exhaust memory, and a zero-length DeserializeString can access an empty vector. Windows uses a different path, and the immediate CoreService pipe writer is the same-user parent process, so the documented exposure is a local defense-in-depth boundary rather than a remote attack. This issue is fixed in 1.26.30. |
| IBM CockroachDB PostgreSQL for IBM VPC 26.2.0 through 26.2.3, 25.4.0 through 25.4.12, and 25.2.0 through 25.2.20 is vulnerable to privilege escalation via user-defined function. |
| Two RTIO syscall verifiers, in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0), did not validate user-supplied pointers before the kernel wrote through them.
z_vrfy_rtio_sqe_cancel() performed no validation at all. It passed the caller's struct rtio_sqe pointer straight to z_impl_rtio_sqe_cancel(), which converts it with CONTAINER_OF to a struct rtio_iodev_sqe, ORs RTIO_SQE_CANCELED (BIT(3)) into its 16-bit flags field in supervisor mode, then loads its next pointer and repeats until that pointer is NULL. The syscall takes no RTIO context argument, so it needs no object grant: any user-mode thread on a CONFIG_USERSPACE build can set that bit in a 16-bit word at an address of its choosing in kernel memory, and the kernel continues the write along whatever pointer chain it finds at the corresponding offset. Setting chosen bits in kernel data structures, such as object permission or thread state fields, can be used to escalate privilege from user mode.
z_vrfy_rtio_sqe_copy_in_get_handles() validated its RTIO context and the input SQE array, but only NULL-checked the handle out-parameter before writing a kernel SQE pointer through it, with no K_SYSCALL_MEMORY_WRITE check. A user thread that holds a granted RTIO context can therefore make the kernel store a pointer value at an arbitrary address.
The fixes validate the handle out-parameter as writable, bound the cancel handle to real submission-pool storage, and require permission on the RTIO context that owns the matching pool. Without that last check a bounded handle still let any user thread cancel submissions belonging to other contexts, silently aborting their I/O. Systems built without CONFIG_USERSPACE or without CONFIG_RTIO are unaffected. |
| IBM MQ 9.2.0.0 through 9.2.0.44 LTS, 9.3.0.0 through 9.3.0.42 LTS, 9.4.0.0 through 9.4.0.26 LTS, 9.4.0.0 through 9.4.5.1 CD, and 10.0.0.0 through 10.0.0.5 LTS and CD is vulnerable to an XML external entity injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. |
| IBM MQ 9.2.0.0 through 9.2.0.44 LTS, 9.3.0.0 through 9.3.0.42 LTS, 9.4.0.0 through 9.4.0.26 LTS, 9.4.0.0 through 9.4.5.1 CD, and 10.0.0.0 through 10.0.0.5 LTS and CD is vulnerable to an XML external entity injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. |
| IBM MQ 9.2.0.0 through 9.2.0.44 LTS, 9.3.0.0 through 9.3.0.42 LTS, 9.4.0.0 through 9.4.0.26 LTS, 9.4.0.0 through 9.4.5.1 CD, and 10.0.0.0 through 10.0.0.5 LTS and CD Managed File Transfer could allow an authenticated attacker to obtain sensitive information or cause a denial of service due to improper restriction of XML external entity references in command queue processing. |
| @twilio-labs/netlify-okta-auth through 1.0.2 relies on an unverified iss claim. This affects an outbound HTTP request to retrieve a public signing key. There may be other impacts in a misconfiguration where oktaUrl isn't set. |
| Improper isolation of shared resources in aws-network-policy-agent in Amazon EKS Network Policy Agent before 1.3.7 (VPC CNI before 1.22.3) might allow an authenticated adjacent user to bypass NetworkPolicy ingress enforcement on co-located pods via eBPF conntrack map poisoning using crafted AF_PACKET frames.
To remediate this issue, users should upgrade to Amazon VPC CNI Managed Add-on v1.22.3 or later (which includes Network Policy Agent v1.3.7). |
| Improper handling of a failed memory remap in Firecracker versions 0.23.0 through 1.16.1 might allow a guest user with root privileges to read or modify Firecracker VMM process memory via balloon or virtio-mem discard requests on microVMs restored from a snapshot with the File memory backend, if the host fails to create the replacement mapping.
To remediate this issue, users should upgrade to Firecracker 1.16.2 or 1.17.0 and later. |
| In all prior released versions of FRRouting, the OSPFv3 (for IPv6) implementation does not check that OSPFv3 packets have a link-local source address and either a link-local destination or one of the protocol multicast destination groups. This may enable malicious actors to establish OSPFv3 adjacencies from unexpectedly, distant IPv6 hosts. Proper usage of OSPFv3 authentication trailers (RFC 7166, as is best practice) prevents full exploitation of this issue, though may allow a malicious actor to waste CPU on authentication checks.
Note the linked PR #23935 is not sufficient to fix the issue as it only verifies the source address. It is the destination address that must be checked.
Required configuration: The OSPFv3 for IPv6 routing protocol must be running (ospf6d process) and in use (enabled globally with "router ospf6" and on specific interfaces with "ipv6 ospf6 area".)
Workaround: either:
* configure OSPFv3 authentication trailers ("ipv6 ospf6 authentication")
* or ensure through firewall configuration that only packets with link-local or multicast destination addresses are accepted on input for IPv6 protocol 89 (OSPF). Note that checking the source address is insufficient, as some routers may (unexpectedly) forward packets with global-scoped IPv6 destination addresses even if they have link-local source addresses. |
| Sonatype Nexus Repository 3 does not require realm administration permission when a user creates a Rut Auth capability. A user who holds only the capability creation permission (nexus:capabilities:create) can create this capability, which turns on header-based authentication for the instance. A remote client can then authenticate as an existing user, including an administrator, without credentials. |
| Sonatype Nexus Repository 3 contains a SQL injection vulnerability in the optional "Reindex Search Tables By Pattern" task. A user who holds the nexus:tasks:create privilege can supply a crafted filter condition that the database runs as SQL. This allows the user to modify data in the Nexus database. The task is available only when the non-default setting nexus.reindex.search.by.pattern.visible is set to true. |
| Resource exhaustion vulnerability in the HTTP request handling of the QHttpServer component of Qt HTTP Server. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.2, attacker-controlled data from several binary format plugins could reach RBinInfo->bclass. Opening or analyzing a crafted Pebble or Sega Mega Drive binary could place a dbg:// URI in bclass, causing radare2 to reopen the input through the debug input/output plugin and ultimately pass attacker-controlled arguments to execvp(). This could execute commands with the privileges of the radare2 process without an explicit debugging command. This issue is fixed in version 6.2.2. |
