| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When the HTTP stream wrapper follows a redirect and the response carries a Location header with an empty value, the redirect code reads one byte past the end of the heap buffer holding the location. The value of that out-of-bounds byte decides which redirect target is built, so a malicious server controls whether the client is sent to the host root or to the current directory. |
| The SOAP HTTP client guards its response buffer growth with a check that relies on signed integer overflow, which is undefined behaviour and is not guaranteed to trigger. When the check is optimised away, a malicious SOAP server can make the client allocate a buffer far smaller than the data it then writes into it, producing a heap buffer overflow. |
| phar_tar_number() parses the octal size field of a TAR header into a uint32_t with no overflow check. The field is 11 octal digits wide and holds values up to 0x1FFFFFFFF, so a size above 0xFFFFFFFF silently wraps. The parser then skips the wrong number of data blocks and interprets attacker-controlled file content as the next TAR header, which lets a crafted archive inject entries that PharData reports and extracts as if they were genuine. |
| cleanup_xml_node() in the SOAP XML parser recurses once per XML nesting level with no depth limit. An unauthenticated attacker can post a SOAP request containing tens of thousands of nested elements to any SoapServer endpoint, exhaust the stack and crash the process. The same unbounded recursion exists in the SOAP value decoder and in the WSDL node search helper. |
| PHP's OpenSSL stream peer verification checks the certificate's subjectAltName entries first and, whenever no entry matches, falls back to the Common Name. RFC 6125 requires the CN to be ignored once the certificate presents any service identity, so a certificate carrying a non-matching DNS SAN was still accepted when its CN matched the requested peer_name. A certificate trusted by the client for one name can therefore be used to impersonate another. |
| Replaying GSS-TSIG signed UDP messages can result in memory corruption in "`named`". An attacker who can capture a previously signed UDP message can replay it while the negotiated TSIG key is still valid. By also sending crafted queries to a zone the attacker controls, the attacker may potentially achieve remote code execution.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| In a BIND resolver, inbound DNS protocol messages with a particular structure will result in additional processing, with no limit imposed by BIND. A DNS message with a maliciously large number of such structures will cause BIND to consume disproportionate amounts of CPU time and memory during processing.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| A BIND resolver that is configured with both a "redirect" zone and "qname-minimization strict" may abort with an assertion failure while processing the redirect.
This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.16.8-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| A recursive BIND server that receives a query with recursion desired (RD=1) followed by a non-recursive query (RD=0) may exit with an assertion failure, resulting in a denial of service. To be vulnerable, the BIND server must allow recursive queries and have at least two RPZ zones configured: one with the default setting of "recursive-only yes", and the other with "recursive-only no".
This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| Out-of-bounds Write vulnerability in Apache HTTP Server's mod_proxy_html with crafted HTTP response bodies.
This issue affects Apache HTTP Server version 2.4.68. |
| CVE-2026-110927 has been marked as a duplicate of CVE-2026-106585. |
| A denial of service vulnerability exists when Microsoft Common Object Runtime Library improperly handles web requests. An attacker who successfully exploited this vulnerability could cause a denial of service against a .NET web application.
A remote unauthenticated attacker could exploit this vulnerability by issuing specially crafted requests to the .NET application.
The update addresses the vulnerability by correcting how the .NET web application handles web requests. |
| Origin validation error in .NET allows an unauthorized attacker to disclose information over a network. |
| Incorrect object recycling and re-use vulnerability in Apache Tomcat affecting HTTP/2 processing of asynchronous servlets can trigger request and/or response mix-up between users.
This issue affects Apache Tomcat: from 11.0.22 through 11.0.26, from 10.1.55 through 10.1.60, from 9.0.118 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fixes the issue. |
| Buffer under-read vulnerability in Apache Tomcat meant that a large non-blocking write could result in the response body being split between the current request and the next request received on that connection leading most likely to failure of the second request and possibly leakage of data from the first response to the second.
This issue affects Apache Tomcat: from 11.0.0-M25 through 11.0.26.
Users are recommended to upgrade to version 11.0.27, which fixes the issue. |
| During an upload, curl mishandles HTTP/2 `RST_STREAM` received from the server
(with reason `HTTP_1_1_REQUIRED` or `REFUSED_STREAM`) leading to a use after
free of a `struct Curl_easy` object. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, 4.3.0, When a binding is created on an x-jms-topic exchange, add_binding/3 reads the rjms_erlang_selector argument and passes it through erl_scan:string/1 then erl_parse:parse_term/1. erl_scan:string/1 interns every atom literal it tokenizes. validate_binding/2 is a no-op (-> ok.), there is no length cap, and the surrounding try/catch cannot reclaim atoms. The Java JMS client compiles selectors client-side, but the server does not enforce this , a raw AMQP client can send arbitrary selector strings. An authenticated low-privilege AMQP user confined to one vhost can crash the entire broker node (cross-tenant DoS) in <100 bind calls. Preconditions include rabbitmq_jms_topic_exchange plugin enabled (bundled; required for any JMS deployment) Authenticated AMQP user with read on an x-jms-topic exchange + write on a queue (or configure to declare both). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0, accept_content/2 at line 56 calls rabbit_stream_manager:create_super_stream/... directly after is_authorized (which only checks the management tag + vhost access via is_authorized_vhost). The stream-protocol equivalent (rabbit_stream_reader.erl create_super_stream handler) calls rabbit_stream_utils:check_super_stream_management_permitted/4 which enforces configure on the exchange and each partition queue. The HTTP handler omits this call entirely. A user with management tag and vhost access , but no configure permission on any resource , can create super-streams (an exchange + N partition stream queues + bindings) via the HTTP API. The native stream-protocol path enforces configure on each resource; the HTTP path does not, creating a privilege escalation from 'can view' to 'can create persistent cluster-wide resources.' Preconditions include rabbitmq_stream_management plugin enabled management tag + vhost access (no resource permissions needed). This issue is fixed in versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.1.11, 4.2.6, and 4.3.0, validate_partitions only checks that the requested partition count is at least 1, with no upper bound. A large count such as lists:seq(0, 500000000) allocates roughly 8GB. Preconditions include The rabbitmq_stream_management plugin must be enabled. The caller needs the management tag and access to the target vhost.. This issue is fixed in versions 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, is_authorized/2 for the /federation-links/.../restart route uses is_authorized_monitor (accepts the monitoring tag), while allowed_methods permits DELETE and delete_resource/2 triggers rabbit_federation_link_sup:restart. There is no per-method elevation check and no comment marking it intentional. A read-only monitoring user can restart any federation link , a state-changing operation that disrupts message flow. Preconditions include rabbitmq_federation + rabbitmq_federation_management plugins enabled Attacker has credentials with the monitoring tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. |
