| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Apache bRPC versions before 1.18.0 validate the server certificate chain when client TLS peer verification is enabled, but do not bind the certificate to an expected DNS name or IP address. A network attacker who can redirect or intercept a connection and who possesses a certificate issued by a CA trusted by the client for another name may impersonate the requested TLS endpoint.
Affected Scenarios:
Applications use a bRPC client Channel to connect to an untrusted network with certificate verification enabled and trust a CA that can issue certificates for identities other than the intended endpoint.
How to Fix:
Upgrade to Apache bRPC 1.18.0 and enable VERIFY_PEER with a positive verify_depth. HTTPS Channels automatically verify the certificate against the host in the Channel URL. Callers may set VerifyOptions::expected_peer_name explicitly when the certificate identity differs from the URL host. Alternatively, apply the patch from https://github.com/apache/brpc/pull/3408 .
Note:
The new option performs DNS SAN or IP SAN verification during the TLS handshake. Configurations that set expected_peer_name while peer verification is disabled are rejected. |
| Missing authentication for critical function vulnerability in Apache IoTDB.
This issue affects Apache IoTDB: from 2.0.0 before 2.0.11.
Users are recommended to upgrade to version 2.0.11, which fixes the issue. |
| An authentication bypass vulnerability exists in Apache IoTDB's Thrift RPC service
This issue affects Apache IoTDB: from 2.0.0 before 2.0.11.
Users are recommended to upgrade to version 2.0.11, which fixes the issue. |
| Uncontrolled Resource Consumption vulnerability in Apache IoTDB JDBC driver.
This issue affects Apache IoTDB JDBC driver: from 1.3.3 before 2.0.11.
Users are recommended to upgrade to version 2.0.11, which fixes the issue. |
| Incorrect implementation of authentication algorithm vulnerability in Apache Answer.
This issue affects Apache Answer: through 2.0.2.
A flaw in the User Center login integration can cause a newly created external user session to omit its external identity, allowing subsequent requests to bypass central account suspension or deletion checks until the session
expires or is revoked.
Users are recommended to upgrade to version 2.0.3, which fixes the issue. |
| On a brpc::Server that sets both ServerOptions.auth and ServerOptions.internal_port, the HTTP built-in service exemption on internal_port can be abused to bypass authentication entirely. VerifyHttpRequest() returns true without checking any credential when a built-in service is requested on internal_port, and this verdict is not per - request: verification runs only for the first message of a connection and the result latches the connection. Sending a request such as GET /status to internal_port first authenticates the whole connection, after which every subsequent request dispatched on the same connection is handled without ever calling VerifyHttpRequest(). This lets a remote attacker reach ordinary (non-built-in, non-tabbed) authenticated services without supplying valid credentials whenever the server uses ServerOptions.internal_port together with an Authenticator. The fix restricts internal_port so that it carries only built-in and Tabbed services; requests for ordinary services sent to internal_port are rejected with EPREM / HTTP 403.
Mitigation / Fix: upgrade to 1.18.0 or apply PR https://github.com/apache/brpc/pull/3525 .
Users who rely on serving normal services on internal_port must move those requests to the port passed to Server::Start(). |
| An out-of-bounds read vulnerability exists in the streaming RPC client of Apache bRPC (versions 1.11.0 through 1.17.0) on all platforms. A client that creates multiple streams in a single RPC expects the server response to carry exactly one extra_stream_id for every additional stream. The response handling path indexed the returned identifiers using the locally created stream count without first validating the size of the returned list, so a malicious or compromised server (or an on-path attacker) can trigger an out-of-bounds read in the client by returning a malformed StreamSettings response with fewer extra_stream_ids than expected. This may crash the client process (denial of service) or leak unintended memory contents into subsequent stream handling; surplus identifiers have no valid client-stream mapping and are processed inconsistently.
Root Cause:
Since bRPC 1.11.0, a client can create multiple streams in one RPC via batch StreamCreate. The expected behavior is that the server response must return exactly (N-1) extra_stream_ids, where N is the number of locally created streams. In Controller::HandleStreamConnection, the response path reads extra_stream_ids[i-1] for each additional local stream without first comparing the returned list size with (N-1). If the server returns fewer identifiers, the read runs past the end of the returned list (out-of-bounds read); if it returns more, the surplus identifiers have no corresponding client-side stream.
Affected Scenarios:
A bRPC client using multi-stream RPC (creating more than one stream in a single RPC) that connects to an untrusted, malicious, or compromised server or to a server reached through an untrusted network path. The server sends a malformed StreamSettings response to trigger the issue.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3485
Note:
The fix makes the client reject responses whose extra_stream_ids count does not exactly match the number of additional client streams. Such mismatched responses now fail the RPC with ERESPONSE and go through the existing stream cleanup path, instead of being partially processed. |
| Missing authentication in the streaming RPC path of Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to bypass server authentication and inject or deliver streaming frames, when a server is configured with an Authenticator.
Root Cause:
When authentication is configured, streaming RPC frames are consumed directly by the streaming parser (ParseStreamingMessage) and never pass through InputMessenger's authentication hook, so an unauthenticated peer can exchange frames without being authenticated. In addition, a server-accepted stream is bound lazily to the first frame that happens to carry its id, so a stream could accept a frame carrying its id from a socket other than the socket that created the stream.
Affected Scenarios:
A bRPC server configured with authentication that serves streaming RPC from an untrusted network, or a deployment where a foreign connection can impersonate a stream by id, can be made to accept unauthorized streaming frames.
How to Fix:
Upgrade bRPC to 1.18.0, which fixes this issue, or apply the patch in PR https://github.com/apache/brpc/pull/3481.
Note:
The fix rejects streaming frames on server sockets when configured authentication has not completed, and keeps server-accepted streams bound to the socket of their creating RPC and rejects frames arriving from another socket. Authenticated streaming RPC behavior and the wire format are unchanged; only unauthenticated or foreign-socket frames are now rejected. |
| Resource exhaustion in Apache bRPC (version < 1.18.0) on all platforms: multiple parsers that accept wire-controlled input bound no limit on the sizes declared by the client or on decompressed output, which attackers can use to drive disproportionate memory use and crash the process.
Root Cause:
1) The gzip/zlib/snappy decompressors enforce no output limit: -max_body_size is checked against the compressed bytes only, so a cap-compliant body (e.g. 64 MiB) can decompress to tens of GiB.
2) The AMF string readers allocate the declared length before the bytes are actually available.
3) RTMP chunk headers may re-declare a message length mid-stream; the declared length was never bounded and the partial reassembly buffer kept growing.
4) The sofa-pbrpc parser does not bound meta_size.
5) mcpack2pb trusts wire-declared item counts for Reserve() and a string value_size of 0 underflows the buffer size, aborting the process.
Affected Scenarios:
Any bRPC service accepting gzip/zlib/snappy-compressed bodies or rtmp, sofa-pbrpc, or mcpack2pb messages from untrusted clients.
How to Fix:(Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3476
Note:
After the fix, requests whose decompressed size, RTMP message length, or mcpack declared count exceed the new limits are rejected. Operators who legitimately need larger values can raise the corresponding flag (-max_decompressed_body_size, max_body_size). |
| Uncontrolled resource consumption in the HTTP/2 (h2) receive path of Apache bRPC (version < 1.18.0) on all platforms allows a remote unauthenticated attacker to crash the server or grow its memory without bound by sending crafted HTTP/2 frames.
Root Cause:
The h2 parser, enabled by default on every bRPC server port and used by h2/gRPC clients, trusts the peer to respect receive-side limits that bRPC advertises but never enforces:
1. SETTINGS_MAX_CONCURRENT_STREAMS defaulted to unlimited and was never checked on the server, letting a peer pin an unbounded number of pending streams per connection (~100x memory amplification).
2. SETTINGS_MAX_HEADER_LIST_SIZE defaulted to unlimited and was never enforced; 1-byte HPACK indexed references amplify a small HEADERS frame ~4000x into an unbounded decoded header list ("HPACK bomb"), and a never-completed HEADERS/CONTINUATION block accumulates memory without limit.
3. Control-frame acks (PING/SETTINGS acks, RST_STREAM, GOAWAY, WINDOW_UPDATE) unconditionally bypassed the -socket_max_unwritten_bytes write cap, so a PING flood combined with withheld TCP reads grew the connection buffer without the documented bound.
4. The HPACK dynamic table size update was validated against the protocol default (4096) instead of the advertised SETTINGS_HEADER_TABLE_SIZE, which together with the dynamic-table queue/accounting issue can desynchronize the decoder and dereference NULL (crash).
Affected scenarios:
Any bRPC server serving HTTP/h2/gRPC to an untrusted network, and any bRPC h2/gRPC client connecting to an untrusted backend. The h2 parser runs before any Authenticator check on the shared port.
How to fix:
Upgrade bRPC, or apply the patch in https://github.com/apache/brpc/pull/3474.
Note:
After applying the fix the following limits are enforced by default:
- max_concurrent_streams: 1024 per connection (4294967295 restores unlimited).
- max_header_list_size: 1 MiB decoded size per stream (4294967295 restores unlimited; -h2_client_max_header_list_size for clients).
- h2 control-frame acks respect -socket_max_unwritten_bytes (-h2_ack_ignore_eovercrowded restores the old behavior).
Requests exceeding these limits are rejected (RST_STREAM(REFUSED_STREAM) or a connection error). |
| A reachable-assertion flaw in the HPACK header-compression decoder of the HTTP/2 (h2/gRPC) stack in Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a crafted sequence of HPACK headers, resulting in a denial of service.
Root Cause:
In src/brpc/details/hpack.cpp, IndexTable::Init sizes the dynamic-table ring buffer as num_headers = max_size / (32 + 2), i.e. it assumes a minimum table entry of 34 bytes (name >= 1 byte + value >= 1 byte + 32 bytes of overhead). However, RFC 7541 section 4.1 specifies that the minimum entry size is 33 bytes, because the value may be empty (name >= 1 byte + value == 0 + 32 bytes). For the default 4096-byte table this allocates only 120 slots (4096/34). Eviction in AddHeader is driven by byte usage (_max_size), not by slot count, so a peer can add 121 minimal 33-byte entries (121*33 = 3993 <= 4096) without triggering eviction. The 121st AddHeader then hits CHECK(!_header_queue.full()), which aborts the process.
Affected Scenarios:
Use a bRPC server that serves HTTP/2 or gRPC requests (e.g. via the h2 protocol) from an untrusted network. The malicious header block is processed during HPACK decoding of incoming requests without authentication.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3462
Note:
The fix sizes the dynamic table for the 33-byte minimum entry (max_size / (32 + 1)) and ensures at least one ring-buffer slot is kept when max_size is smaller than the minimum entry, so that initialization cannot fail on malloc(0). |
| A heap use-after-free in the RTMP protocol component of Apache bRPC (versions < 1.18.0) allows a remote attacker to crash a bRPC RTMP server by sending a crafted Abort control message. No authentication or application-level request is required.
Root Cause:
When an RTMP Abort control message names the chunk stream that is currently being parsed (the chunk stream carrying the message itself), RtmpChunkStream::OnAbortMessage calls RtmpContext::ClearChunkStream, which deletes the RtmpChunkStream while its Feed() is still running. After the message handler returns, Feed() continues to access members of the deleted object, resulting in a heap-use-after-free.
Affected Scenarios:
bRPC servers that enable RTMP support (ServerOptions.rtmp_service set) and accept connections from untrusted networks.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3452
The fix skips clearing the chunk stream when the Abort message targets the chunk stream that is currently being parsed. |
| Potential JDBC source configuration validation vulnerability in Apache Kylin. The impact is minor, unless the kylin backend services are open to public network.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Apache Kylin. The impact is moderate if kylin service is in query only mode, which is the default and most common mode.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Missing authentication for in-house broadcast and polymorphic deserialization vulnerability in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Missing authorization on jdbc source config update in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Server-Side request forgery (SSRF) vulnerability in Apache Kylin. Impact most to the kylin job service that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Path-confinement bypass during metadata backup deletion in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| The Legacy Pipe receiver protocol (handshake / sendPipeData) uses a
hardcoded SUPER_USER (root) identity when executing data loading and
deletion operations. A user with only SYSTEM-level privileges (such as
USE_PIPE or MAINTAIN) who does NOT have WRITE_DATA or DELETE_DATA
permissions on target databases can send specially crafted PipeData
messages through the Legacy Pipe API, resulting in data loading/deletion
operations executed as root — effectively bypassing IoTDB's permission
model entirely.
This issue affects Apache IoTDB: from 2.0.0 before 2.0.11.
Users are recommended to upgrade to version 2.0.11, which fixes the issue. |
| External control of file name or path and uncontrolled resource consumption in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers who can reach the builtin service port to create directories and truncate/overwrite files with the privileges of the server process, or to hold the process-wide CPU/contention profiler for an arbitrarily long time.
Root Cause:
1. The builtin /flags service allows gflags carrying a validator to be modified at runtime via ?setvalue=. The bvar/mbvar dump path gflags (bvar_dump_file, bvar_dump_tabs, mbvar_dump_file) were registered with an accept-anything validator whose only purpose was to wake the dumping thread. A remote attacker could therefore repoint the dump path (e.g. GET /flags/bvar_dump_file?setvalue=/victim/dir/target followed by GET /flags/bvar_dump?setvalue=true, or the equivalent for mbvar_dump_file, which is used verbatim without a forced suffix), making the dumping thread recursively create directories and open/truncate files at attacker-chosen locations. Tab names in bvar_dump_tabs were appended to the path without sanitization, allowing '..' to escape the configured directory.
2. The /pprof builtin service did not clamp the ?seconds= parameter to FLAGS_max_profiling_seconds (a limit that /hotspots enforced). A single request such as ?seconds=2147483647 made the handler sleep for decades while holding the process-wide gperftools CPU profiler or bthread contention profiler, so /hotspots/cpu and /hotspots/contention returned 503 for everyone else during that time.
Affected Scenarios:
Any Apache bRPC server exposing the builtin services (enabled by default on the same port as normal RPC traffic) to untrusted networks.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3523
Note:
After the fix, bvar_dump_file, bvar_dump_tabs and mbvar_dump_file can no longer be modified at runtime through the /flags builtin service. They can still be changed programmatically via google::SetCommandLineOption(), taking effect on the next dump cycle. The profiling duration of /pprof is now capped by the -max_profiling_seconds gflag (default 300 seconds), which can be adjusted by the server owner. |
