| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: validate port_count against message length in t7xx_port_enum_msg_handler
t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as
a loop bound over port_msg->data[] without checking that the message buffer
contains sufficient data. A modem sending port_count=65535 in a 12-byte
buffer triggers a slab-out-of-bounds read of up to 262140 bytes.
Add a sizeof(*port_msg) check before accessing the port message header
fields to guard against undersized messages.
Add a struct_size() check after extracting port_count and before the loop.
In t7xx_parse_host_rt_data(), guard the rt_feature header read with a
remaining-buffer check before accessing data_len, validate feat_data_len
against the actual remaining buffer to prevent OOB reads and signed
integer overflow on offset.
Pass msg_len from both call sites: skb->len at the DPMAIF path after
skb_pull(), and the validated feat_data_len at the handshake path. |
| sppp_pap_input in sys/net/if_spppsubr.c in OpenBSD before 076e2b1 allows authentication bypass via certain zero values for lengths. |
| Nextcloud Server is an open source personal cloud server. Prior to versions 23.0.10 and 24.0.5, calendar name lengths are not validated before writing to a database. As a result, an attacker can send unnecessary amounts of data against the database. Version 23.0.10 and 24.0.5 contain patches for the issue. No known workarounds are available. |
| conduit-hyper integrates a conduit application with the hyper server. Prior to version 0.4.2, `conduit-hyper` did not check any limit on a request's length before calling [`hyper::body::to_bytes`](https://docs.rs/hyper/latest/hyper/body/fn.to_bytes.html). An attacker could send a malicious request with an abnormally large `Content-Length`, which could lead to a panic if memory allocation failed for that request. In version 0.4.2, `conduit-hyper` sets an internal limit of 128 MiB per request, otherwise returning status 400 ("Bad Request"). This crate is part of the implementation of Rust's [crates.io](https://crates.io/), but that service is not affected due to its existing cloud infrastructure, which already drops such malicious requests. Even with the new limit in place, `conduit-hyper` is not recommended for production use, nor to directly serve the public Internet. |
| Flux is an open and extensible continuous delivery solution for Kubernetes. Versions prior to 0.35.0 are subject to a Denial of Service. Users that have permissions to change Flux’s objects, either through a Flux source or directly within a cluster, can provide invalid data to fields `.spec.interval` or `.spec.timeout` (and structured variations of these fields), causing the entire object type to stop being processed. This issue is patched in version 0.35.0. As a workaround, Admission controllers can be employed to restrict the values that can be used for fields `.spec.interval` and `.spec.timeout`, however upgrading to the latest versions is still the recommended mitigation. |
| A stack-based buffer overflow vulnerability exists in both the LLMNR functionality of Sealevel Systems, Inc. SeaConnect 370W v1.3.34. A specially-crafted network packet can lead to remote code execution. An attacker can send a malicious packet to trigger this vulnerability. |
| Unauthenticated Broken Authentication in Upsell Order Bump Offer for WooCommerce <= 3.1.4 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmasm: fix OOB reads in command_file_write due to missing size checks
The command_file_write() handler allocates a kernel buffer of exactly
count bytes and copies user data into it, but does not validate the
buffer against the dot command protocol before passing it to
get_dot_command_size() and get_dot_command_timeout().
Since both the allocation size (count) and the header fields (command_size,
data_size) are independently user-controlled, an attacker can cause
get_dot_command_size() to return a value exceeding the allocation,
triggering OOB reads in get_dot_command_timeout() and an out-of-bounds
memcpy_toio() that leaks kernel heap memory to the service processor.
Fix with two guards: reject writes smaller than sizeof(struct
dot_command_header) before allocation, then after copying user data
reject commands where the buffer is smaller than the total size declared
by the header (sizeof(header) + command_size + data_size). This ensures
all subsequent header and payload field accesses stay within the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Add validation for MTU changes
Increasing the MTU beyond the HDS threshold causes the hardware to
fragment packets across multiple buffers. If a single-buffer XDP program
is attached, the driver will drop all multi-frag frames. While we can't
prevent a remote sender from sending non-TCP packets larger than the MTU,
this will prevent users from inadvertently breaking new TCP streams.
Traditionally, drivers supported XDP with MTU less than 4Kb
(packet per page). Fbnic currently prevents attaching XDP when MTU is too high.
But it does not prevent increasing MTU after XDP is attached. |
| The SSH service of CelloOS developed by Cellopoint has an Improper Access Control vulnerability, allowing authenticated remote attackers to bypass the enforced command restrictions and execute operating system commands outside the originally authorized scope. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-24, a missing check in the DCM decoder could result in an image with invalid dimensions and that could cause crashes in other operation. This issue has been patched in versions 6.9.13-48 and 7.1.2-24. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: disallow non-power of two min_region_sz on damon_start()
Commit d8f867fa0825 ("mm/damon: add damon_ctx->min_sz_region") introduced
a bug that allows unaligned DAMON region address ranges. Commit
c80f46ac228b ("mm/damon/core: disallow non-power of two min_region_sz")
fixed it, but only for damon_commit_ctx() use case. Still, DAMON sysfs
interface can emit non-power of two min_region_sz via damon_start(). Fix
the path by adding the is_power_of_2() check on damon_start().
The issue was discovered by sashiko [1]. |
| Ubuntu Linux 6.8, 6.17 and 7.0 contain SAUCE patches which fail to validate invalid sizes of the name field in AppAmor notification responses. The bug can be triggered by an unprivileged local user and could result in handling of crafted responses. |
| Improper Validation of Specified Quantity in Input vulnerability in ShapedPlugin, LLC Product Slider Pro for WooCommerce allows Malicious Software Implanted.
This issue affects Product Slider Pro for WooCommerce: from n/a before 3.5.4. |
| liboqs is a C-language cryptographic library that provides implementations of post-quantum cryptography algorithms. Prior to 0.16.0, an out-of-bounds read has been identified in the XMSS and XMSS^MT stateful signature verification code. When the verification function is called with a signature buffer shorter than the expected signature size for the given parameter set, the implementation does not validate the caller-supplied length and proceeds to read past the end of the buffer. The out-of-bounds bytes are consumed only as input to an internal hash computation and are not returned to the caller, so no oracle exists to leak their contents to an attacker. The primary observable effect is a possible crash (denial of service) of the verifying process if the read crosses into an unmapped memory page. This vulnerability is fixed in 0.16.0. |
| Integer Overflow or Wraparound, Improper Validation of Specified Quantity in Input vulnerability in RestApp Inc. Online Ordering System allows Integer Attacks.
This issue affects Online Ordering System: 8.2.1.
NOTE: Vulnerability fixed in version 8.2.2 and does not exist before 8.2.1. |
| IBM Cloud APM, Base Private 8.1.4 and IBM Cloud APM, Advanced Private 8.1.4 IBM Db2 for Linux, UNIX and Windows (includes DB2 Connect Server) could allow an authenticated user to cause a denial of service due to improper neutralization of special elements in the data query logic of the Fenced environment. |
| IBM OPENBMC FW1110.00 through FW1110.11 is vulnerable to denial of service attacks by unauthenticated network users. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: add buffer boundary checks to run_unpack()
run_unpack() checks `run_buf < run_last` at the top of the while loop
but then reads size_size and offset_size bytes via run_unpack_s64()
without verifying they fit within the remaining buffer. A crafted NTFS
image with truncated run data in an MFT attribute triggers an OOB heap
read of up to 15 bytes when the filesystem is mounted.
Add boundary checks before each run_unpack_s64() call to ensure the
declared field size does not exceed the remaining buffer.
Found by fuzzing with a source-patched harness (LibAFL + QEMU). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate inline data i_size during inode read
When reading an inode from disk, ocfs2_validate_inode_block() performs
various sanity checks but does not validate the size of inline data. If
the filesystem is corrupted, an inode's i_size can exceed the actual
inline data capacity (id_count).
This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data
buffer, triggering a use-after-free when accessing directory entries from
freed memory.
In the syzbot report:
- i_size was 1099511627576 bytes (~1TB)
- Actual inline data capacity (id_count) is typically <256 bytes
- A garbage rec_len (54648) caused ctx->pos to jump out of bounds
- This triggered a UAF in ocfs2_check_dir_entry()
Fix by adding a validation check in ocfs2_validate_inode_block() to ensure
inodes with inline data have i_size <= id_count. This catches the
corruption early during inode read and prevents all downstream code from
operating on invalid data. |
