| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Time-of-check time-of-use (toctou) race condition in Microsoft Office Click-To-Run allows an authorized attacker to elevate privileges locally. |
| util-linux is a random collection of Linux utilities. In util-linux 2.17 through 2.41.6 and 2.42 through 2.42.3, and in 2.42.4 when the legacy `mount(2)` path is used without `/proc`, restricted non-root `mount` requests validate an `/etc/fstab` target before the mount operation re-resolves that pathname. A local low-privileged user authorized by an fstab `user` or `users` entry whose target has an attacker-writable ancestor can use `renameat2(RENAME_EXCHANGE)` to swap a path component and redirect an authorized mount to a root-owned location, such as mounting attacker-controlled content over `/etc/sudoers.d`, and thereby gain root privileges. Versions 2.41.5 and 2.42.2 pin targets for the new mount API, and 2.42.4 pins legacy targets through `/proc/self/fd`; the documented legacy fallback without `/proc` remains affected. |
| Privasys Remote Attestation TLS Clients provides multi-language utilities for verifying attested TLS connections. Before 0.9.1, an attacker with local access could modify workload code, data, and configuration at any time after successful connection establishment. Once Evidence was successfully appraised and the connection was established, there was a window of vulnerability from the establishment of the connection to the termination of the connection where an attacker could modify the state of the workload and platform at runtime on the TLS endpoint acting as the Attester. This vulnerability was possible because Privasys/ra-tls-clients performed attestation only once in the lifetime of the connection (at connection establishment time), and the verifying peer continued to believe that the state was the same as in the initial Evidence throughout, whereas it could be stale at some point in time. This vulnerability is fixed in 0.9.1. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the locking used by afs_get_link()
The afs filesystem in the kernel doesn't do locking correctly for symbolic
links. There are a number of problems:
(1) It doesn't do any locking around afs_read_single() to prevent races
between multiple ->get_link() calls, thereby allowing the possibility
of leaks.
(2) It doesn't use RCU barriering when accessing the buffer pointers
during RCU pathwalk.
(3) It can race with another thread updating the contents of the symlink
if a third party updated it on the server.
Fix this by the following means:
(0) Move symlink handling into its own file as this makes it more
complicated.
(1) Take the validate_lock around afs_read_single() to prevent races
between multiple ->get_link() calls.
(2) Keep a separate copy of the symlink contents with an rcu_head. This
is always going to be a lot smaller than a page, so it can be
kmalloc'd and save quite a bit of memory. It also needs a refcount
for non-RCU pathwalk.
(3) Split the symlink read and write-to-cache routines in afs from those
for directories.
(4) Discard the I/O buffer as soon as the write-to-cache completes as this
is a full page (plus a folio_queue).
(5) If there's no cache, discard the I/O buffer immediately after reading
and copying if there is no cache. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix race condition when checking rpm_on
When autosuspend is triggered, driver rpm_on flag is set to indicate that
a suspend/resume is already in progress. However, when a userspace
application submits a command during this narrow window,
amdxdna_pm_resume_get() may incorrectly skip the resume operation because
the rpm_on flag is still set. This results in commands being submitted
while the device has not actually resumed, causing unexpected behavior.
The set_dpm() is called by suspend/resume, it relied on rpm_on flag to
avoid calling into rpm suspend/resume recursivly. So to fix this, remove
the use of the rpm_on flag entirely. Instead, introduce aie2_pm_set_dpm()
which explicitly resumes the device before invoking set_dpm(). With this
change, set_dpm() is called directly inside the suspend or resume execution
path. Otherwise, aie2_pm_set_dpm() is called. |
| Gitea's repository migration and pull mirror egress checks could be bypassed with a hostname that returns multiple DNS answers, because the address that was validated was not necessarily the address Git later connected to. A low-privileged user who can create migrations or mirrors could direct the server to internal services, reading from and writing to reachable internal Git or HTTP endpoints. Content from internal responses could additionally be disclosed through migration and mirror error messages. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Move iio_device_register() to correct location
iio_device_register() should be at the end of the probe function to
prevent race conditions.
Place iio_device_register() at the end of the probe function and place
iio_device_unregister() accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: fsl: qbman: fix race condition in qman_destroy_fq
When QMAN_FQ_FLAG_DYNAMIC_FQID is set, there's a race condition between
fq_table[fq->idx] state and freeing/allocating from the pool and
WARN_ON(fq_table[fq->idx]) in qman_create_fq() gets triggered.
Indeed, we can have:
Thread A Thread B
qman_destroy_fq() qman_create_fq()
qman_release_fqid()
qman_shutdown_fq()
gen_pool_free()
-- At this point, the fqid is available again --
qman_alloc_fqid()
-- so, we can get the just-freed fqid in thread B --
fq->fqid = fqid;
fq->idx = fqid * 2;
WARN_ON(fq_table[fq->idx]);
fq_table[fq->idx] = fq;
fq_table[fq->idx] = NULL;
And adding some logs between qman_release_fqid() and
fq_table[fq->idx] = NULL makes the WARN_ON() trigger a lot more.
To prevent that, ensure that fq_table[fq->idx] is set to NULL before
gen_pool_free() is called by using smp_wmb(). |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting
PLIC ignores interrupt completion message for disabled interrupt, explained
by the specification:
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the
claim/complete register. The PLIC does not check whether the completion
ID is the same as the last claim ID for that target. If the completion
ID does not match an interrupt source that is currently enabled for
the target, the completion is silently ignored.
This caused problems in the past, because an interrupt can be disabled
while still being handled and plic_irq_eoi() had no effect. That was fixed
by checking if the interrupt is disabled, and if so enable it, before
sending the completion message. That check is done with irqd_irq_disabled().
However, that is not sufficient because the enable bit for the handling
hart can be zero despite irqd_irq_disabled(d) being false. This can happen
when affinity setting is changed while a hart is still handling the
interrupt.
This problem is easily reproducible by dumping a large file to uart (which
generates lots of interrupts) and at the same time keep changing the uart
interrupt's affinity setting. The uart port becomes frozen almost
instantaneously.
Fix this by checking PLIC's enable bit instead of irqd_irq_disabled(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: Prevent parser TCAM memory corruption
Protect the parser TCAM/SRAM memory, and the cached (shadow) SRAM
information, from concurrent modifications.
Both the TCAM and SRAM tables are indirectly accessed by configuring
an index register that selects the row to read or write to. This means
that operations must be atomic in order to, e.g., avoid spreading
writes across multiple rows. Since the shadow SRAM array is used to
find free rows in the hardware table, it must also be protected in
order to avoid TOCTOU errors where multiple cores allocate the same
row.
This issue was detected in a situation where `mvpp2_set_rx_mode()` ran
concurrently on two CPUs. In this particular case the
MVPP2_PE_MAC_UC_PROMISCUOUS entry was corrupted, causing the
classifier unit to drop all incoming unicast - indicated by the
`rx_classifier_drops` counter. |
| util-linux is a random collection of Linux utilities. In util-linux 2.39 through 2.41.4 and 2.42 through 2.42.1, the SUID `mount` utility's `hook_owner.c` post-mount hook performs path-based `chmod()` and `lchown()` operations on a previously validated mount target. A local low-privileged user authorized by an `/etc/fstab` entry with `user` or `users` and an `X-mount.mode`, `X-mount.owner`, or `X-mount.group` option can use `renameat2(RENAME_EXCHANGE)` to race a writable ancestor of the target and redirect the privileged ownership or mode change to a root-owned path, potentially gaining root privileges. This issue is fixed in 2.41.5 and 2.42.2. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: improve shutdown sequence
Alexander Sverdlin presents 2 problems during shutdown with the
lan9303 driver. One is specific to lan9303 and the other just happens
to reproduce there.
The first problem is that lan9303 is unique among DSA drivers in that it
calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown,
not remove):
phy_state_machine()
-> ...
-> dsa_user_phy_read()
-> ds->ops->phy_read()
-> lan9303_phy_read()
-> chip->ops->phy_read()
-> lan9303_mdio_phy_read()
-> dev_get_drvdata()
But we never stop the phy_state_machine(), so it may continue to run
after dsa_switch_shutdown(). Our common pattern in all DSA drivers is
to set drvdata to NULL to suppress the remove() method that may come
afterwards. But in this case it will result in an NPD.
The second problem is that the way in which we set
dp->conduit->dsa_ptr = NULL; is concurrent with receive packet
processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL,
but afterwards, rather than continuing to use that non-NULL value,
dev->dsa_ptr is dereferenced again and again without NULL checks:
dsa_conduit_find_user() and many other places. In between dereferences,
there is no locking to ensure that what was valid once continues to be
valid.
Both problems have the common aspect that closing the conduit interface
solves them.
In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN
event in dsa_user_netdevice_event() which closes user ports as well.
dsa_port_disable_rt() calls phylink_stop(), which synchronously stops
the phylink state machine, and ds->ops->phy_read() will thus no longer
call into the driver after this point.
In the second case, dev_close(conduit) should do this, as per
Documentation/networking/driver.rst:
| Quiescence
| ----------
|
| After the ndo_stop routine has been called, the hardware must
| not receive or transmit any data. All in flight packets must
| be aborted. If necessary, poll or wait for completion of
| any reset commands.
So it should be sufficient to ensure that later, when we zeroize
conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call
on this conduit.
The addition of the netif_device_detach() function is to ensure that
ioctls, rtnetlinks and ethtool requests on the user ports no longer
propagate down to the driver - we're no longer prepared to handle them.
The race condition actually did not exist when commit 0650bf52b31f
("net: dsa: be compatible with masters which unregister on shutdown")
first introduced dsa_switch_shutdown(). It was created later, when we
stopped unregistering the user interfaces from a bad spot, and we just
replaced that sequence with a racy zeroization of conduit->dsa_ptr
(one which doesn't ensure that the interfaces aren't up). |
| shadow: TOCTOU (time-of-check time-of-use) race condition when copying and removing directory trees |
| Time-of-check time-of-use (toctou) race condition in Windows Subsystem for Linux allows an authorized attacker to elevate privileges locally. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 39.8.10, 41.10.5, and 42.0.0-beta.2, Electron applications on macOS that use Squirrel.Mac-based automatic updates are vulnerable to a local race in the privileged ShipIt helper. The helper did not bind the validated update target to one canonical application-bundle path for the full installation, allowing a local attacker to redirect the root-level write so that it overwrites another application's files instead of the application that initiated the update. Applications on other platforms and macOS applications that do not use Squirrel.Mac-based automatic updates are not affected. This issue is fixed in versions 39.8.10, 41.10.5, and 42.0.0-beta.2. |
| Shepherd (shepherd-ai) through 0.3.1 contains a server-side request forgery guard bypass in the citation-checker extra because the public_url guard validates a resolved address but fetch re-resolves the hostname at connect time. Attackers who plant a crafted reference URL in a checked document and control its DNS can rebind it to internal addresses, sending GET requests to internal HTTP(S) services and capturing responses in evidence files. |
| ImageMagick before 7.1.2-32 contains a time-of-check time-of-use symlink race vulnerability that allows attackers to bypass the path security policy when executing a magick script. Attackers can swap a checked path with a symlink during script execution to read files that the security policy is meant to block. |
| hyper-mcp through 0.8.3 contains a signature verification bypass vulnerability in load_wasm in src/wasm/oci.rs that verifies the Cosign signature of a separately resolved tag rather than the loaded manifest. Attackers controlling registry responses for the tag can serve an unsigned malicious manifest to the loader and a signed one to Cosign, executing unsigned WebAssembly plugins with configured host capabilities. |
| JupyterLab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. From 4.5.7 until 4.5.11 and 4.6.4, the markdownviewer:trust and notebook:trust command-link handlers use tracker.currentWidget to resolve the current Markdown viewer or notebook when the user answers rather than retaining the document whose command button was clicked. If another document becomes current while the prompt is open and the user chooses Trust, JupyterLab marks the second document trusted while leaving the clicked document untrusted. Later command buttons in the incorrectly trusted document run without a prompt, and trusting a notebook marks all cells trusted, saves unsaved edits, and persists the server signature to disk. Applications that bundle JupyterLab, including affected Notebook and JupyterLite releases, inherit the behavior. This issue is fixed in versions 4.5.11 and 4.6.4. |
| Gitea validated a push mirror's remote address against the `[migrations]` allow and block lists only when the mirror was created. Each synchronization passed the stored address directly to `git push`, so a name that later resolved to a blocked or internal address was still reached. A user with administrator access to a repository, which includes repositories they create themselves, could aim push mirror synchronization at internal Git services and force-push the repository's contents to them. |
