| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix warning in ext4_iomap_begin as race between bmap and write
We got issue as follows:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 9310 at fs/ext4/inode.c:3441 ext4_iomap_begin+0x182/0x5d0
RIP: 0010:ext4_iomap_begin+0x182/0x5d0
RSP: 0018:ffff88812460fa08 EFLAGS: 00010293
RAX: ffff88811f168000 RBX: 0000000000000000 RCX: ffffffff97793c12
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: ffff88812c669160 R08: ffff88811f168000 R09: ffffed10258cd20f
R10: ffff88812c669077 R11: ffffed10258cd20e R12: 0000000000000001
R13: 00000000000000a4 R14: 000000000000000c R15: ffff88812c6691ee
FS: 00007fd0d6ff3740(0000) GS:ffff8883af180000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd0d6dda290 CR3: 0000000104a62000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
iomap_apply+0x119/0x570
iomap_bmap+0x124/0x150
ext4_bmap+0x14f/0x250
bmap+0x55/0x80
do_vfs_ioctl+0x952/0xbd0
__x64_sys_ioctl+0xc6/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Above issue may happen as follows:
bmap write
bmap
ext4_bmap
iomap_bmap
ext4_iomap_begin
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
ext4_da_write_inline_data_begin
ext4_prepare_inline_data
ext4_create_inline_data
ext4_set_inode_flag(inode,
EXT4_INODE_INLINE_DATA);
if (WARN_ON_ONCE(ext4_has_inline_data(inode))) ->trigger bug_on
To solved above issue hold inode lock in ext4_bamp. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a data-race around bpf_jit_limit.
While reading bpf_jit_limit, it can be changed concurrently via sysctl,
WRITE_ONCE() in __do_proc_doulongvec_minmax(). The size of bpf_jit_limit
is long, so we need to add a paired READ_ONCE() to avoid load-tearing. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling
amd_pmu_enable_all() does:
if (!test_bit(idx, cpuc->active_mask))
continue;
amd_pmu_enable_event(cpuc->events[idx]);
A perf NMI of another event can come between these two steps. Perf NMI
handler internally disables and enables _all_ events, including the one
which nmi-intercepted amd_pmu_enable_all() was in process of enabling.
If that unintentionally enabled event has very low sampling period and
causes immediate successive NMI, causing the event to be throttled,
cpuc->events[idx] and cpuc->active_mask gets cleared by x86_pmu_stop().
This will result in amd_pmu_enable_event() getting called with event=NULL
when amd_pmu_enable_all() resumes after handling the NMIs. This causes a
kernel crash:
BUG: kernel NULL pointer dereference, address: 0000000000000198
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
[...]
Call Trace:
<TASK>
amd_pmu_enable_all+0x68/0xb0
ctx_resched+0xd9/0x150
event_function+0xb8/0x130
? hrtimer_start_range_ns+0x141/0x4a0
? perf_duration_warn+0x30/0x30
remote_function+0x4d/0x60
__flush_smp_call_function_queue+0xc4/0x500
flush_smp_call_function_queue+0x11d/0x1b0
do_idle+0x18f/0x2d0
cpu_startup_entry+0x19/0x20
start_secondary+0x121/0x160
secondary_startup_64_no_verify+0xe5/0xeb
</TASK>
amd_pmu_disable_all()/amd_pmu_enable_all() calls inside perf NMI handler
were recently added as part of BRS enablement but I'm not sure whether
we really need them. We can just disable BRS in the beginning and enable
it back while returning from NMI. This will solve the issue by not
enabling those events whose active_masks are set but are not yet enabled
in hw pmu. |
| In the Linux kernel, the following vulnerability has been resolved:
dm ioctl: fix misbehavior if list_versions races with module loading
__list_versions will first estimate the required space using the
"dm_target_iterate(list_version_get_needed, &needed)" call and then will
fill the space using the "dm_target_iterate(list_version_get_info,
&iter_info)" call. Each of these calls locks the targets using the
"down_read(&_lock)" and "up_read(&_lock)" calls, however between the first
and second "dm_target_iterate" there is no lock held and the target
modules can be loaded at this point, so the second "dm_target_iterate"
call may need more space than what was the first "dm_target_iterate"
returned.
The code tries to handle this overflow (see the beginning of
list_version_get_info), however this handling is incorrect.
The code sets "param->data_size = param->data_start + needed" and
"iter_info.end = (char *)vers+len" - "needed" is the size returned by the
first dm_target_iterate call; "len" is the size of the buffer allocated by
userspace.
"len" may be greater than "needed"; in this case, the code will write up
to "len" bytes into the buffer, however param->data_size is set to
"needed", so it may write data past the param->data_size value. The ioctl
interface copies only up to param->data_size into userspace, thus part of
the result will be truncated.
Fix this bug by setting "iter_info.end = (char *)vers + needed;" - this
guarantees that the second "dm_target_iterate" call will write only up to
the "needed" buffer and it will exit with "DM_BUFFER_FULL_FLAG" if it
overflows the "needed" space - in this case, userspace will allocate a
larger buffer and retry.
Note that there is also a bug in list_version_get_needed - we need to add
"strlen(tt->name) + 1" to the needed size, not "strlen(tt->name)". |
| In the Linux kernel, the following vulnerability has been resolved:
net: annotate races around sk->sk_bound_dev_if
UDP sendmsg() is lockless, and reads sk->sk_bound_dev_if while
this field can be changed by another thread.
Adds minimal annotations to avoid KCSAN splats for UDP.
Following patches will add more annotations to potential lockless readers.
BUG: KCSAN: data-race in __ip6_datagram_connect / udpv6_sendmsg
write to 0xffff888136d47a94 of 4 bytes by task 7681 on cpu 0:
__ip6_datagram_connect+0x6e2/0x930 net/ipv6/datagram.c:221
ip6_datagram_connect+0x2a/0x40 net/ipv6/datagram.c:272
inet_dgram_connect+0x107/0x190 net/ipv4/af_inet.c:576
__sys_connect_file net/socket.c:1900 [inline]
__sys_connect+0x197/0x1b0 net/socket.c:1917
__do_sys_connect net/socket.c:1927 [inline]
__se_sys_connect net/socket.c:1924 [inline]
__x64_sys_connect+0x3d/0x50 net/socket.c:1924
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x50 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff888136d47a94 of 4 bytes by task 7670 on cpu 1:
udpv6_sendmsg+0xc60/0x16e0 net/ipv6/udp.c:1436
inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:652
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x50 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00000000 -> 0xffffff9b
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 7670 Comm: syz-executor.3 Tainted: G W 5.18.0-rc1-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
I chose to not add Fixes: tag because race has minor consequences
and stable teams busy enough. |
| Race condition in the IPC component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| A TOCTOU (Time-of-Check-Time-of-Use) race condition vulnerability was found in the fixfiles script in policycoreutils. When running fixfiles relabel or fixfiles restore, the script used find and chcon commands to locate and relabel unlabeled files under /tmp and other directories. A local attacker could exploit a race window between the file discovery and the label change operation by swapping directory components with symlinks, causing chcon to follow the symlink and modify SELinux labels on arbitrary system files. This could undermine SELinux mandatory access control protections on critical files such as /etc/shadow. |
| A TOCTOU (Time-of-Check Time-of-Use) vulnerability in GNU tar's incremental dumpdir 'X' rename handling allows a local attacker with write access to a directory being backed up to influence the restore process if the attacker has access to the system where the restore is being performed. During restoration, files or directories may be created, renamed or overwritten outside the intended extraction directory. This could lead to unauthorized file modification or, in some cases, privilege escalation. Exploitation does not require the attacker to modify or craft the archive, and standard backup and restore workflows—including extracting into a newly created directory without using the -P option do not mitigate the issue. |
| FreeRDP before 3.32.2 contains a use-after-free vulnerability that allows malicious RDP servers to corrupt client memory by racing the RDPGFX ResetGraphics handler against the planar bitmap decoder. Attackers can send ResetGraphics while concurrently sending compressed bitmaps of 32 bpp or more to trigger heap use-after-free or out-of-bounds read/write on shared planar buffers. |
| FreeRDP before 3.32.2 contains a use-after-free vulnerability in the freerdp-proxy DRDYNVC tracker when intercepting the drdynvc channel. A malicious target server can repeatedly send CREATE_REQUEST_PDU for an active channel id, racing front DATA handling to free a borrowed context and crash the proxy process. |
| The Symfony HttpClient component NoPrivateNetworkHttpClient does not pin the checked IP address of cached hosts, allowing for DNS rebinding to bypass private network restrictions, resulting in enumeration of internal hosts and ports in Symfony versions prior to 5.4.56, 6.x prior to 6.4.50, 7.x prior to 7.4.23, and 8.x prior to 8.1.11.
NoPrivateNetworkHttpClient resolves the host of each request and checks the IP before connecting. It caches the result per host, and passes the IP to the decorated client through the resolve option so that the client connects to the exact IP that was checked. The issue is that resolve was only passed on the first lookup of a host: on subsequent requests, the decorated client resolved the host again on its own.
An attacker who controls a host's DNS can exploit this with DNS rebinding by answering the first lookup with a public IP, and subsequent lookups with a private IP, so when an application sends several requests to that host through the same client, the later requests connect to the private IP. This happens, for example, when an application fetches several URLs of a repository provided by a user. The check of the primary_ip in the on_progress callback still aborts the request before anything is sent, but the connection is made, and the error differs depending on whether the port is open or closed. This allows enumerating internal hosts and ports, as in CVE-2024-50342. |
| Incorrect authorization due to a time-of-check to time-of-use (TOCTOU) race condition in the setACL request handling of Apache ZooKeeper.
When a node's ACL is changed via setACL, the pending change is not published to the server's outstanding change record for that node. Any request that is prepared (and authorized) after the setACL is submitted but before it commits is therefore checked against the previous, pre-revocation ACL, yet is applied to the data tree after the ACL change has taken effect. A client that currently holds a permission can use this window to perform operations requiring that permission through and after its revocation — for example, committing writes or deletes after losing write access, or re-granting itself full permissions, which persistently defeats the revocation. In deployments transitioning from the default OPEN_ACL_UNSAFE ACL to a restrictive ACL, any unauthenticated client can exploit this during the transition.
This issue affects Apache ZooKeeper up to and including 3.9.6. Users are recommended to upgrade to version 3.8.8 or 3.9.7, which fixes the issue. |
| Race condition in the Disability Access APIs component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| A race condition was addressed with improved state handling. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, tvOS 27.2, visionOS 27.2, watchOS 27.2. An app may be able to cause unexpected system termination. |
| Race condition in Autofill in Google Chrome prior to 157.0.8103.38 allowed a remote attacker to potentially obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium) |
| Race condition in Mobile in Google Chrome on on iOS prior to 157.0.8103.38 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Low) |
| A vulnerability was found in systemd-coredump. This flaw allows an attacker to force a SUID process to crash and replace it with a non-SUID binary to access the original's privileged process coredump, allowing the attacker to read sensitive data, such as /etc/shadow content, loaded by the original process.
A SUID binary or process has a special type of permission, which allows the process to run with the file owner's permissions, regardless of the user executing the binary. This allows the process to access more restricted data than unprivileged users or processes would be able to. An attacker can leverage this flaw by forcing a SUID process to crash and force the Linux kernel to recycle the process PID before systemd-coredump can analyze the /proc/pid/auxv file. If the attacker wins the race condition, they gain access to the original's SUID process coredump file. They can read sensitive content loaded into memory by the original binary, affecting data confidentiality. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Wait for SCX_OPSS_DISPATCHING before moving tasks off DSQs
A task can be found on a non-local DSQ while the CPU which dispatched it
is still running ops.dequeue() and hasn't cleared SCX_OPSS_DISPATCHING.
The DSQ consume and move paths don't wait for the dispatch to finish and
can operate on the task concurrently with the dispatcher.
Call scx_wait_dispatching() in scx_move_local_task_to_local_dsq(),
unlink_dsq_and_switch_rq_lock() and move_task_between_dsqs() before they
operate on the task. In scx_move_local_task_to_local_dsq(), wait before
scx_resolve_local_dsq() as it may update p->scx.flags. |
| A race condition leading to a stack use-after-free flaw was found in libvirt. Due to a bad assumption in the virNetClientIOEventLoop() method, the `data` pointer to a stack-allocated virNetClientIOEventData structure ended up being used in the virNetClientIOEventFD callback while the data pointer's stack frame was concurrently being "freed" when returning from virNetClientIOEventLoop(). The 'virtproxyd' daemon can be used to trigger requests. If libvirt is configured with fine-grained access control, this issue, in theory, allows a user to escape their otherwise limited access. This flaw allows a local, unprivileged user to access virtproxyd without authenticating. Remote users would need to authenticate before they could access it. |
| In multiple locations, there is a possible memory corruption due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
