| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
igc: Reduce TSN TX packet buffer from 7KB to 5KB per queue
The previous 7 KB per queue caused TX unit hangs under heavy
timestamping load. Reducing to 5 KB avoids these hangs and matches
the TSN recommendation in I225/I226 SW User Manual Section 7.5.4.
The 8 KB "freed" by this change is currently unused. This reduction
is not expected to impact throughput, as the i226 is PCIe-limited
for small TSN packets rather than TX-buffer-limited. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx8m-blk-ctrl: Remove separate rst and clk mask for 8mq vpu
For i.MX8MQ platform, the ADB in the VPUMIX domain has no separate reset
and clock enable bits, but is ungated and reset together with the VPUs.
So we can't reset G1 or G2 separately, it may led to the system hang.
Remove rst_mask and clk_mask of imx8mq_vpu_blk_ctl_domain_data.
Let imx8mq_vpu_power_notifier() do really vpu reset. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop
Currently this is checked before running the pending work. Normally this
is quite fine, as work items either end up blocking (which will create a
new worker for other items), or they complete fairly quickly. But syzbot
reports an issue where io-wq takes seemingly forever to exit, and with a
bit of debugging, this turns out to be because it queues a bunch of big
(2GB - 4096b) reads with a /dev/msr* file. Since this file type doesn't
support ->read_iter(), loop_rw_iter() ends up handling them. Each read
returns 16MB of data read, which takes 20 (!!) seconds. With a bunch of
these pending, processing the whole chain can take a long time. Easily
longer than the syzbot uninterruptible sleep timeout of 140 seconds.
This then triggers a complaint off the io-wq exit path:
INFO: task syz.4.135:6326 blocked for more than 143 seconds.
Not tainted syzkaller #0
Blocked by coredump.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz.4.135 state:D stack:26824 pid:6326 tgid:6324 ppid:5957 task_flags:0x400548 flags:0x00080000
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5256 [inline]
__schedule+0x1139/0x6150 kernel/sched/core.c:6863
__schedule_loop kernel/sched/core.c:6945 [inline]
schedule+0xe7/0x3a0 kernel/sched/core.c:6960
schedule_timeout+0x257/0x290 kernel/time/sleep_timeout.c:75
do_wait_for_common kernel/sched/completion.c:100 [inline]
__wait_for_common+0x2fc/0x4e0 kernel/sched/completion.c:121
io_wq_exit_workers io_uring/io-wq.c:1328 [inline]
io_wq_put_and_exit+0x271/0x8a0 io_uring/io-wq.c:1356
io_uring_clean_tctx+0x10d/0x190 io_uring/tctx.c:203
io_uring_cancel_generic+0x69c/0x9a0 io_uring/cancel.c:651
io_uring_files_cancel include/linux/io_uring.h:19 [inline]
do_exit+0x2ce/0x2bd0 kernel/exit.c:911
do_group_exit+0xd3/0x2a0 kernel/exit.c:1112
get_signal+0x2671/0x26d0 kernel/signal.c:3034
arch_do_signal_or_restart+0x8f/0x7e0 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:41 [inline]
exit_to_user_mode_loop+0x8c/0x540 kernel/entry/common.c:75
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline]
do_syscall_64+0x4ee/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa02738f749
RSP: 002b:00007fa0281ae0e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 00007fa0275e6098 RCX: 00007fa02738f749
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fa0275e6098
RBP: 00007fa0275e6090 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fa0275e6128 R14: 00007fff14e4fcb0 R15: 00007fff14e4fd98
There's really nothing wrong here, outside of processing these reads
will take a LONG time. However, we can speed up the exit by checking the
IO_WQ_BIT_EXIT inside the io_worker_handle_work() loop, as syzbot will
exit the ring after queueing up all of these reads. Then once the first
item is processed, io-wq will simply cancel the rest. That should avoid
syzbot running into this complaint again. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix devlink reload call trace
Commit 4da71a77fc3b ("ice: read internal temperature sensor") introduced
internal temperature sensor reading via HWMON. ice_hwmon_init() was added
to ice_init_feature() and ice_hwmon_exit() was added to ice_remove(). As a
result if devlink reload is used to reinit the device and then the driver
is removed, a call trace can occur.
BUG: unable to handle page fault for address: ffffffffc0fd4b5d
Call Trace:
string+0x48/0xe0
vsnprintf+0x1f9/0x650
sprintf+0x62/0x80
name_show+0x1f/0x30
dev_attr_show+0x19/0x60
The call trace repeats approximately every 10 minutes when system
monitoring tools (e.g., sadc) attempt to read the orphaned hwmon sysfs
attributes that reference freed module memory.
The sequence is:
1. Driver load, ice_hwmon_init() gets called from ice_init_feature()
2. Devlink reload down, flow does not call ice_remove()
3. Devlink reload up, ice_hwmon_init() gets called from
ice_init_feature() resulting in a second instance
4. Driver unload, ice_hwmon_exit() called from ice_remove() leaving the
first hwmon instance orphaned with dangling pointer
Fix this by moving ice_hwmon_exit() from ice_remove() to
ice_deinit_features() to ensure proper cleanup symmetry with
ice_hwmon_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
Octeontx2-af: Add proper checks for fwdata
firmware populates MAC address, link modes (supported, advertised)
and EEPROM data in shared firmware structure which kernel access
via MAC block(CGX/RPM).
Accessing fwdata, on boards booted with out MAC block leading to
kernel panics.
Internal error: Oops: 0000000096000005 [#1] SMP
[ 10.460721] Modules linked in:
[ 10.463779] CPU: 0 UID: 0 PID: 174 Comm: kworker/0:3 Not tainted 6.19.0-rc5-00154-g76ec646abdf7-dirty #3 PREEMPT
[ 10.474045] Hardware name: Marvell OcteonTX CN98XX board (DT)
[ 10.479793] Workqueue: events work_for_cpu_fn
[ 10.484159] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 10.491124] pc : rvu_sdp_init+0x18/0x114
[ 10.495051] lr : rvu_probe+0xe58/0x1d18 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: prevent pcp corruption with SMP=n
The kernel test robot has reported:
BUG: spinlock trylock failure on UP on CPU#0, kcompactd0/28
lock: 0xffff888807e35ef0, .magic: dead4ead, .owner: kcompactd0/28, .owner_cpu: 0
CPU: 0 UID: 0 PID: 28 Comm: kcompactd0 Not tainted 6.18.0-rc5-00127-ga06157804399 #1 PREEMPT 8cc09ef94dcec767faa911515ce9e609c45db470
Call Trace:
<IRQ>
__dump_stack (lib/dump_stack.c:95)
dump_stack_lvl (lib/dump_stack.c:123)
dump_stack (lib/dump_stack.c:130)
spin_dump (kernel/locking/spinlock_debug.c:71)
do_raw_spin_trylock (kernel/locking/spinlock_debug.c:?)
_raw_spin_trylock (include/linux/spinlock_api_smp.h:89 kernel/locking/spinlock.c:138)
__free_frozen_pages (mm/page_alloc.c:2973)
___free_pages (mm/page_alloc.c:5295)
__free_pages (mm/page_alloc.c:5334)
tlb_remove_table_rcu (include/linux/mm.h:? include/linux/mm.h:3122 include/asm-generic/tlb.h:220 mm/mmu_gather.c:227 mm/mmu_gather.c:290)
? __cfi_tlb_remove_table_rcu (mm/mmu_gather.c:289)
? rcu_core (kernel/rcu/tree.c:?)
rcu_core (include/linux/rcupdate.h:341 kernel/rcu/tree.c:2607 kernel/rcu/tree.c:2861)
rcu_core_si (kernel/rcu/tree.c:2879)
handle_softirqs (arch/x86/include/asm/jump_label.h:36 include/trace/events/irq.h:142 kernel/softirq.c:623)
__irq_exit_rcu (arch/x86/include/asm/jump_label.h:36 kernel/softirq.c:725)
irq_exit_rcu (kernel/softirq.c:741)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1052)
</IRQ>
<TASK>
RIP: 0010:_raw_spin_unlock_irqrestore (arch/x86/include/asm/preempt.h:95 include/linux/spinlock_api_smp.h:152 kernel/locking/spinlock.c:194)
free_pcppages_bulk (mm/page_alloc.c:1494)
drain_pages_zone (include/linux/spinlock.h:391 mm/page_alloc.c:2632)
__drain_all_pages (mm/page_alloc.c:2731)
drain_all_pages (mm/page_alloc.c:2747)
kcompactd (mm/compaction.c:3115)
kthread (kernel/kthread.c:465)
? __cfi_kcompactd (mm/compaction.c:3166)
? __cfi_kthread (kernel/kthread.c:412)
ret_from_fork (arch/x86/kernel/process.c:164)
? __cfi_kthread (kernel/kthread.c:412)
ret_from_fork_asm (arch/x86/entry/entry_64.S:255)
</TASK>
Matthew has analyzed the report and identified that in drain_page_zone()
we are in a section protected by spin_lock(&pcp->lock) and then get an
interrupt that attempts spin_trylock() on the same lock. The code is
designed to work this way without disabling IRQs and occasionally fail the
trylock with a fallback. However, the SMP=n spinlock implementation
assumes spin_trylock() will always succeed, and thus it's normally a
no-op. Here the enabled lock debugging catches the problem, but otherwise
it could cause a corruption of the pcp structure.
The problem has been introduced by commit 574907741599 ("mm/page_alloc:
leave IRQs enabled for per-cpu page allocations"). The pcp locking scheme
recognizes the need for disabling IRQs to prevent nesting spin_trylock()
sections on SMP=n, but the need to prevent the nesting in spin_lock() has
not been recognized. Fix it by introducing local wrappers that change the
spin_lock() to spin_lock_iqsave() with SMP=n and use them in all places
that do spin_lock(&pcp->lock).
[vbabka@suse.cz: add pcp_ prefix to the spin_lock_irqsave wrappers, per Steven] |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: sideband: don't dereference freed ring when removing sideband endpoint
xhci_sideband_remove_endpoint() incorrecly assumes that the endpoint is
running and has a valid transfer ring.
Lianqin reported a crash during suspend/wake-up stress testing, and
found the cause to be dereferencing a non-existing transfer ring
'ep->ring' during xhci_sideband_remove_endpoint().
The endpoint and its ring may be in unknown state if this function
is called after xHCI was reinitialized in resume (lost power), or if
device is being re-enumerated, disconnected or endpoint already dropped.
Fix this by both removing unnecessary ring access, and by checking
ep->ring exists before dereferencing it. Also make sure endpoint is
running before attempting to stop it.
Remove the xhci_initialize_ring_info() call during sideband endpoint
removal as is it only initializes ring structure enqueue, dequeue and
cycle state values to their starting values without changing actual
hardware enqueue, dequeue and cycle state. Leaving them out of sync
is worse than leaving it as it is. The endpoint will get freed in after
this in most usecases.
If the (audio) class driver want's to reuse the endpoint after offload
then it is up to the class driver to ensure endpoint is properly set up. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: check that server is running in unlock_filesystem
If we are trying to unlock the filesystem via an administrative
interface and nfsd isn't running, it crashes the server. This
happens currently because nfsd4_revoke_states() access state
structures (eg., conf_id_hashtbl) that has been freed as a part
of the server shutdown.
[ 59.465072] Call trace:
[ 59.465308] nfsd4_revoke_states+0x1b4/0x898 [nfsd] (P)
[ 59.465830] write_unlock_fs+0x258/0x440 [nfsd]
[ 59.466278] nfsctl_transaction_write+0xb0/0x120 [nfsd]
[ 59.466780] vfs_write+0x1f0/0x938
[ 59.467088] ksys_write+0xfc/0x1f8
[ 59.467395] __arm64_sys_write+0x74/0xb8
[ 59.467746] invoke_syscall.constprop.0+0xdc/0x1e8
[ 59.468177] do_el0_svc+0x154/0x1d8
[ 59.468489] el0_svc+0x40/0xe0
[ 59.468767] el0t_64_sync_handler+0xa0/0xe8
[ 59.469138] el0t_64_sync+0x1ac/0x1b0
Ensure this can't happen by taking the nfsd_mutex and checking that
the server is still up, and then holding the mutex across the call to
nfsd4_revoke_states(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: avoid kernel-infoleak from struct iw_point
struct iw_point has a 32bit hole on 64bit arches.
struct iw_point {
void __user *pointer; /* Pointer to the data (in user space) */
__u16 length; /* number of fields or size in bytes */
__u16 flags; /* Optional params */
};
Make sure to zero the structure to avoid disclosing 32bits of kernel data
to user space. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vkms: Convert to DRM's vblank timer
Replace vkms' vblank timer with the DRM implementation. The DRM
code is identical in concept, but differs in implementation.
Vblank timers are covered in vblank helpers and initializer macros,
so remove the corresponding hrtimer in struct vkms_output. The
vblank timer calls vkms' custom timeout code via handle_vblank_timeout
in struct drm_crtc_helper_funcs. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/display/dp_mst: Add protection against 0 vcpi
When releasing a timeslot there is a slight chance we may end up
with the wrong payload mask due to overflow if the delayed_destroy_work
ends up coming into play after a DP 2.1 monitor gets disconnected
which causes vcpi to become 0 then we try to make the payload =
~BIT(vcpi - 1) which is a negative shift. VCPI id should never
really be 0 hence skip changing the payload mask if VCPI is 0.
Otherwise it leads to
<7> [515.287237] xe 0000:03:00.0: [drm:drm_dp_mst_get_port_malloc
[drm_display_helper]] port ffff888126ce9000 (3)
<4> [515.287267] -----------[ cut here ]-----------
<3> [515.287268] UBSAN: shift-out-of-bounds in
../drivers/gpu/drm/display/drm_dp_mst_topology.c:4575:36
<3> [515.287271] shift exponent -1 is negative
<4> [515.287275] CPU: 7 UID: 0 PID: 3108 Comm: kworker/u64:33 Tainted: G
S U 6.17.0-rc6-lgci-xe-xe-3795-3e79699fa1b216e92+ #1 PREEMPT(voluntary)
<4> [515.287279] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
<4> [515.287279] Hardware name: ASUS System Product Name/PRIME Z790-P
WIFI, BIOS 1645 03/15/2024
<4> [515.287281] Workqueue: drm_dp_mst_wq drm_dp_delayed_destroy_work
[drm_display_helper]
<4> [515.287303] Call Trace:
<4> [515.287304] <TASK>
<4> [515.287306] dump_stack_lvl+0xc1/0xf0
<4> [515.287313] dump_stack+0x10/0x20
<4> [515.287316] __ubsan_handle_shift_out_of_bounds+0x133/0x2e0
<4> [515.287324] ? drm_atomic_get_private_obj_state+0x186/0x1d0
<4> [515.287333] drm_dp_atomic_release_time_slots.cold+0x17/0x3d
[drm_display_helper]
<4> [515.287355] mst_connector_atomic_check+0x159/0x180 [xe]
<4> [515.287546] drm_atomic_helper_check_modeset+0x4d9/0xfa0
<4> [515.287550] ? __ww_mutex_lock.constprop.0+0x6f/0x1a60
<4> [515.287562] intel_atomic_check+0x119/0x2b80 [xe]
<4> [515.287740] ? find_held_lock+0x31/0x90
<4> [515.287747] ? lock_release+0xce/0x2a0
<4> [515.287754] drm_atomic_check_only+0x6a2/0xb40
<4> [515.287758] ? drm_atomic_add_affected_connectors+0x12b/0x140
<4> [515.287765] drm_atomic_commit+0x6e/0xf0
<4> [515.287766] ? _pfx__drm_printfn_info+0x10/0x10
<4> [515.287774] drm_client_modeset_commit_atomic+0x25c/0x2b0
<4> [515.287794] drm_client_modeset_commit_locked+0x60/0x1b0
<4> [515.287795] ? mutex_lock_nested+0x1b/0x30
<4> [515.287801] drm_client_modeset_commit+0x26/0x50
<4> [515.287804] __drm_fb_helper_restore_fbdev_mode_unlocked+0xdc/0x110
<4> [515.287810] drm_fb_helper_hotplug_event+0x120/0x140
<4> [515.287814] drm_fbdev_client_hotplug+0x28/0xd0
<4> [515.287819] drm_client_hotplug+0x6c/0xf0
<4> [515.287824] drm_client_dev_hotplug+0x9e/0xd0
<4> [515.287829] drm_kms_helper_hotplug_event+0x1a/0x30
<4> [515.287834] drm_dp_delayed_destroy_work+0x3df/0x410
[drm_display_helper]
<4> [515.287861] process_one_work+0x22b/0x6f0
<4> [515.287874] worker_thread+0x1e8/0x3d0
<4> [515.287879] ? __pfx_worker_thread+0x10/0x10
<4> [515.287882] kthread+0x11c/0x250
<4> [515.287886] ? __pfx_kthread+0x10/0x10
<4> [515.287890] ret_from_fork+0x2d7/0x310
<4> [515.287894] ? __pfx_kthread+0x10/0x10
<4> [515.287897] ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tests: shmem: Hold reservation lock around vmap/vunmap
Acquire and release the GEM object's reservation lock around vmap and
vunmap operations. The tests use vmap_locked, which led to errors such
as show below.
[ 122.292030] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:390 drm_gem_shmem_vmap_locked+0x3a3/0x6f0
[ 122.468066] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:293 drm_gem_shmem_pin_locked+0x1fe/0x350
[ 122.563504] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:234 drm_gem_shmem_get_pages_locked+0x23c/0x370
[ 122.662248] WARNING: CPU: 2 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:452 drm_gem_shmem_vunmap_locked+0x101/0x330
Only export the new vmap/vunmap helpers for Kunit tests. These are
not interfaces for regular drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tests: shmem: Hold reservation lock around madvise
Acquire and release the GEM object's reservation lock around calls
to the object's madvide operation. The tests use
drm_gem_shmem_madvise_locked(), which led to errors such as show below.
[ 58.339389] WARNING: CPU: 1 PID: 1352 at drivers/gpu/drm/drm_gem_shmem_helper.c:499 drm_gem_shmem_madvise_locked+0xde/0x140
Only export the new helper drm_gem_shmem_madvise() for Kunit tests.
This is not an interface for regular drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: 8822b: Avoid WARNING in rtw8822b_config_trx_mode()
rtw8822b_set_antenna() can be called from userspace when the chip is
powered off. In that case a WARNING is triggered in
rtw8822b_config_trx_mode() because trying to read the RF registers
when the chip is powered off returns an unexpected value.
Call rtw8822b_config_trx_mode() in rtw8822b_set_antenna() only when
the chip is powered on.
------------[ cut here ]------------
write RF mode table fail
WARNING: CPU: 0 PID: 7183 at rtw8822b.c:824 rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b]
CPU: 0 UID: 0 PID: 7183 Comm: iw Tainted: G W OE 6.17.5-arch1-1 #1 PREEMPT(full) 01c39fc421df2af799dd5e9180b572af860b40c1
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: LENOVO 82KR/LNVNB161216, BIOS HBCN18WW 08/27/2021
RIP: 0010:rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b]
Call Trace:
<TASK>
rtw8822b_set_antenna+0x57/0x70 [rtw88_8822b 370206f42e5890d8d5f48eb358b759efa37c422b]
rtw_ops_set_antenna+0x50/0x80 [rtw88_core 711c8fb4f686162be4625b1d0b8e8c6a5ac850fb]
ieee80211_set_antenna+0x60/0x100 [mac80211 f1845d85d2ecacf3b71867635a050ece90486cf3]
nl80211_set_wiphy+0x384/0xe00 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? netdev_run_todo+0x63/0x550
genl_family_rcv_msg_doit+0xfc/0x160
genl_rcv_msg+0x1aa/0x2b0
? __pfx_nl80211_pre_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_nl80211_set_wiphy+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_nl80211_post_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x59/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x285/0x3c0
? __alloc_skb+0xdb/0x1a0
netlink_sendmsg+0x20d/0x430
____sys_sendmsg+0x39f/0x3d0
? import_iovec+0x2f/0x40
___sys_sendmsg+0x99/0xe0
? refill_obj_stock+0x12e/0x240
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x81/0x970
? do_syscall_64+0x81/0x970
? ksys_read+0x73/0xf0
? do_syscall_64+0x81/0x970
? count_memcg_events+0xc2/0x190
? handle_mm_fault+0x1d7/0x2d0
? do_user_addr_fault+0x21a/0x690
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tests: shmem: Hold reservation lock around purge
Acquire and release the GEM object's reservation lock around calls
to the object's purge operation. The tests use
drm_gem_shmem_purge_locked(), which led to errors such as show below.
[ 58.709128] WARNING: CPU: 1 PID: 1354 at drivers/gpu/drm/drm_gem_shmem_helper.c:515 drm_gem_shmem_purge_locked+0x51c/0x740
Only export the new helper drm_gem_shmem_purge() for Kunit tests.
This is not an interface for regular drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Fix alignment fault in rtw_core_enable_beacon()
rtw_core_enable_beacon() reads 4 bytes from an address that is not a
multiple of 4. This results in a crash on some systems.
Do 1 byte reads/writes instead.
Unable to handle kernel paging request at virtual address ffff8000827e0522
Mem abort info:
ESR = 0x0000000096000021
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x21: alignment fault
Data abort info:
ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000005492000
[ffff8000827e0522] pgd=0000000000000000, p4d=10000001021d9403, pud=10000001021da403, pmd=100000011061c403, pte=00780000f3200f13
Internal error: Oops: 0000000096000021 [#1] SMP
Modules linked in: [...] rtw88_8822ce rtw88_8822c rtw88_pci rtw88_core [...]
CPU: 0 UID: 0 PID: 73 Comm: kworker/u32:2 Tainted: G W 6.17.9 #1-NixOS VOLUNTARY
Tainted: [W]=WARN
Hardware name: FriendlyElec NanoPC-T6 LTS (DT)
Workqueue: phy0 rtw_c2h_work [rtw88_core]
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : rtw_pci_read32+0x18/0x40 [rtw88_pci]
lr : rtw_core_enable_beacon+0xe0/0x148 [rtw88_core]
sp : ffff800080cc3ca0
x29: ffff800080cc3ca0 x28: ffff0001031fc240 x27: ffff000102100828
x26: ffffd2cb7c9b4088 x25: ffff0001031fc2c0 x24: ffff000112fdef00
x23: ffff000112fdef18 x22: ffff000111c29970 x21: 0000000000000001
x20: 0000000000000001 x19: ffff000111c22040 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffd2cb6507c090
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000007f10 x1 : 0000000000000522 x0 : ffff8000827e0522
Call trace:
rtw_pci_read32+0x18/0x40 [rtw88_pci] (P)
rtw_hw_scan_chan_switch+0x124/0x1a8 [rtw88_core]
rtw_fw_c2h_cmd_handle+0x254/0x290 [rtw88_core]
rtw_c2h_work+0x50/0x98 [rtw88_core]
process_one_work+0x178/0x3f8
worker_thread+0x208/0x418
kthread+0x120/0x220
ret_from_fork+0x10/0x20
Code: d28fe202 8b020000 f9524400 8b214000 (b9400000)
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't WARN for connections on invalid channels
It's not clear (to me) how exactly syzbot managed to hit this,
but it seems conceivable that e.g. regulatory changed and has
disabled a channel between scanning (channel is checked to be
usable by cfg80211_get_ies_channel_number) and connecting on
the channel later.
With one scenario that isn't covered elsewhere described above,
the warning isn't good, replace it with a (more informative)
error message. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: ensure skb headroom before skb_push
This avoids occasional skb_under_panic Oops from wl1271_tx_work. In this case, headroom is
less than needed (typically 110 - 94 = 16 bytes). |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: call ksmbd_session_rpc_close() on error path in create_smb2_pipe()
When ksmbd_iov_pin_rsp() fails, we should call ksmbd_session_rpc_close(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: avoid chain re-validation if possible
Hamza Mahfooz reports cpu soft lock-ups in
nft_chain_validate():
watchdog: BUG: soft lockup - CPU#1 stuck for 27s! [iptables-nft-re:37547]
[..]
RIP: 0010:nft_chain_validate+0xcb/0x110 [nf_tables]
[..]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_table_validate+0x6b/0xb0 [nf_tables]
nf_tables_validate+0x8b/0xa0 [nf_tables]
nf_tables_commit+0x1df/0x1eb0 [nf_tables]
[..]
Currently nf_tables will traverse the entire table (chain graph), starting
from the entry points (base chains), exploring all possible paths
(chain jumps). But there are cases where we could avoid revalidation.
Consider:
1 input -> j2 -> j3
2 input -> j2 -> j3
3 input -> j1 -> j2 -> j3
Then the second rule does not need to revalidate j2, and, by extension j3,
because this was already checked during validation of the first rule.
We need to validate it only for rule 3.
This is needed because chain loop detection also ensures we do not exceed
the jump stack: Just because we know that j2 is cycle free, its last jump
might now exceed the allowed stack size. We also need to update all
reachable chains with the new largest observed call depth.
Care has to be taken to revalidate even if the chain depth won't be an
issue: chain validation also ensures that expressions are not called from
invalid base chains. For example, the masquerade expression can only be
called from NAT postrouting base chains.
Therefore we also need to keep record of the base chain context (type,
hooknum) and revalidate if the chain becomes reachable from a different
hook location. |
