| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: magnetometer: ak8975: fix potential kernel stack memory leak
Currently in the AK8975 driver there are four instances where potential
uninitialized kernel stack memory leaks can occur. If
i2c_smbus_read_i2c_block_data_or_emulated() returns a value less than
the size of the buffer, uninitialized bytes are retained in the buffer
and later the buffer is passed on to IIO buffers, potentially leaking
memory to userspace.
Fix this by adding checks whether the return value of the function is
equal to the size of the buffer and subsequently if the value is
lesser than zero to distinguish from a returned error code. |
| In the Linux kernel, the following vulnerability has been resolved:
VDUSE: avoid leaking information to userspace
The bounceing is not necessarily page aligned, so current VDUSE can
leak kernel information through mapping bounce pages to
userspace. Allocate bounce pages with __GFP_ZERO to avoid leaking
information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/bugs: Make Safe-RET robust against interrupt injection
An attacker injecting interrupts while the Safe-RET mitigation executes
on machines affected by SRSO can neutralize the safe return sequence,
potentially leading to data leakage through speculative execution.
Fixup register state as if the Safe-RET sequence executed successfully
by "emulating" it, in a manner of speaking, and avoid executing a RET
instruction after returning from the interrupt. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/bios: range check LFP Data Block panel_type2
While the panel_type from LFP Data Block is range checked, panel_type2
is not. Add a few helpers for range checking, and use them to not only
check panel_type2, but also improve clarity and correctness in the panel
type selection.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
- Fix commit message typo (Michał)
- Add is_panel_type_pnp() (Ville)
(cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Do not leak siblings[] on proto context error
After a successful BALANCE/PARALLEL_SUBMIT extension on context
creation, error during processing of next user extension leaks
the siblings[] array. Fix that.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
(cherry picked from commit aa65e0a4b51b3b54b53e4142aaa2d997aa1061ff) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug
If a vCPU stays scheduled out (or blocked) while the last pCPU it ran
on goes through a hotplug cycle (online->offline->online), and the vCPU
then resumes execution on the same pCPU, then it is possible for it to
run with an ASID that has now been assigned to a different vCPU,
resulting in stale TLB translations being used.
svm_enable_virtualization_cpu() resets asid_generation to 1 and sets
next_asid to max_asid + 1 on every CPU online event, including hotplug
cycles. Because next_asid starts beyond the pool boundary, the first
call to new_asid() after an online event always wraps the pool,
incrementing asid_generation to 2 and assigning ASIDs starting from
min_asid.
Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding
asid_generation=2 and ASID=N from before the hotplug event:
1. CPU-X goes offline and back online: asid_generation resets to 1,
next_asid = max_asid + 1.
2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping
the pool and consuming ASIDs starting from min_asid. Eventually
vCPU-B from a different VM is assigned asid_generation=2, ASID=N
— the same ASID that vCPU-A held before the hotplug.
3. vCPU-A enters pre_svm_run() on CPU-X: current_vmcb->cpu is
unchanged so the migration branch is skipped. Its saved
asid_generation=2 matches sd->asid_generation=2, so the generation
check silently passes and vCPU-A continues running with ASID=N —
the same ASID just freshly assigned to vCPU-B.
Both vCPUs from different VMs now run on CPU-X with the same ASID,
causing them to share NPT TLB entries and producing stale translations.
The collision manifests as a KVM internal error (Suberror: 1, emulation
failure). The NPT page fault reports a faulting GPA far outside the
VM's physical memory range — a sign of stale TLB translations being
used. KVM falls back to instruction emulation, which fails on
FPU/XSave instructions (XRSTOR, STMXCSR) that the emulator does not
implement.
Fix this by incrementing asid_generation instead of resetting it to 1
in svm_enable_virtualization_cpu(). On module load, asid_generation
starts at 0 (memset) and the increment produces 1, identical to the
old behaviour. On subsequent hotplug cycles the generation advances
beyond any value a vCPU previously observed on this CPU, so the
generation check in pre_svm_run() reliably forces new_asid() on every
vCPU after every hotplug cycle. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psample: fix info leak in PSAMPLE_ATTR_DATA
psample open codes nla_put() presumably to avoid wiping
the data with 0s just to override it with packet data.
This open coding is missing clearing the pad, however,
each netlink attr is padded to 4B and data_len may
not be divisible by 4B. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix incorrect inheritable capability in CAPSET records
__audit_log_capset() records the effective capability set into the
inheritable field due to a copy-paste error. Every CAPSET audit
record therefore reports cap_pi (process inheritable) with the value
of cap_effective instead of cap_inheritable.
This silently corrupts audit data used for compliance and forensic
analysis: an attacker who modifies inheritable capabilities to
prepare for a privilege-escalating exec would have the change masked
in the audit trail.
The bug has been present since the original introduction of CAPSET
audit records in 2008. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Bounds-check devid in __rlookup_amd_iommu()
iommu_device_register() walks every device on the PCI bus via
bus_for_each_dev() and calls amd_iommu_probe_device() for each. The
inlined check_device() path computes the device's sbdf, calls
rlookup_amd_iommu() to find the owning IOMMU, and only afterwards
verifies devid <= pci_seg->last_bdf. __rlookup_amd_iommu() indexes
rlookup_table[devid] with no bounds check of its own, so for a PCI
device whose BDF is not described by the IVRS, the lookup reads past
the end of the allocation before the caller's bounds check can run.
This was harmless before commit e874c666b15b ("iommu/amd: Change
rlookup, irq_lookup, and alias to use kvalloc()"): the table was a
zeroed page-order allocation, so the over-read returned NULL and the
caller's NULL check skipped the device. After that commit the table is
a tight kvcalloc() and the over-read returns adjacent slab contents,
which check_device() then dereferences as a struct amd_iommu *,
causing a boot-time GPF.
Seen on Google Compute Engine ct6e VMs, where the virtualized IVRS
describes only the four TPU endpoints 00:04.0-07.0; the gVNIC at
00:08.0 (devid 0x40) indexes 56 bytes past the 456-byte allocation,
into the adjacent kmalloc-512 slab object:
pci 0000:00:04.0: Adding to iommu group 0
pci 0000:00:05.0: Adding to iommu group 1
pci 0000:00:06.0: Adding to iommu group 2
pci 0000:00:07.0: Adding to iommu group 3
Oops: general protection fault, probably for non-canonical address 0x3a64695f78746382: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.22 #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/06/2025
RIP: 0010:amd_iommu_probe_device+0x54/0x3a0
Call Trace:
__iommu_probe_device+0x107/0x520
probe_iommu_group+0x29/0x50
bus_for_each_dev+0x7e/0xe0
iommu_device_register+0xc9/0x240
iommu_go_to_state+0x9c0/0x1c60
amd_iommu_init+0x14/0x40
pci_iommu_init+0x16/0x60
do_one_initcall+0x47/0x2f0
Guard the array access in __rlookup_amd_iommu(). With the fix applied
on 6.18.22, the gVNIC at 00:08.0 is skipped cleanly and the VM boots. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: SQR). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 2.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:N/A:N). |
| A flaw was found in Netty. A remote attacker could exploit this vulnerability by sending specially crafted HTTP/2 or HTTP/3 Extended CONNECT requests. Netty's HTTP-object conversion path incorrectly processes these requests as regular HTTP/1.1 CONNECT requests, leading to a loss of critical protocol and path information. This misinterpretation can allow attackers to bypass security policies, such as routing or authorization logic, in applications that rely on Netty for HTTP/2 or HTTP/3 communication, resulting in integrity loss. |
| A flaw was found in Netty's HTTP/2 codec. When converting HTTP/1 CONNECT requests to HTTP/2, the component incorrectly uses the Host header instead of the CONNECT authority-form request-target for the tunnel authority. A remote attacker can exploit this by supplying a different Host header, leading to a malformed HTTP/2 CONNECT request. This can bypass security controls such as tunnel allow-lists or egress policies, resulting in integrity loss. |
| The OAuth2 userinfo endpoint (`/login/oauth/userinfo`) decided whether to limit the `groups` claim to public organizations by re-parsing the `Authorization` header as an OAuth2 access token instead of using the scope of the credential that authenticated the request. When a public-only OAuth2 token was sent as a query parameter or form field, or a public-only personal access token was used, that scope came back empty and the claim listed the token owner's private organizations, teams and concealed memberships. The disclosure is limited to the owner's organization and team names and memberships; no repository content is exposed. The endpoint now uses the scope of the authenticating token. |
| A security issue was discovered in ingress-nginx where a user with permission to create an Ingress may be able to cause denial of service of the ingress-nginx data plane, or possibly redirect traffic from other Ingresses. Kubernetes clusters are only affected if they are using ingress-nginx.
Due to a missing check, the mirror-target Ingress annotation can be used to target an unauthenticated configuration API within the ingress-nginx controller, allowing write commands to be submitted. Corrupting the data within that configuration API results in all traffic through ingress-nginx being dropped until an Ingress configuration change or a controller restart causes the data to be recreated correctly.
In principle, this write access could also be used to redirect traffic from other Ingresses controlled by the same ingress-nginx instance. In practice, there is negligible additional risk: such redirection would require privileged information about internal ingress-nginx state, and users can already redirect traffic from other Ingresses controlled by the same ingress-nginx anyway. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CoAP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2.
When the CoAP consumer could not build its response once the route had completed, CamelCoapResource caught the resulting exception and sent its message back to the CoAP client as the payload of a 5.00 Internal Server Error response. The typical case is a type conversion failure: the consumer converts the final message body to the byte[] payload, and the CamelCoapMaxAge and CamelCoapETag headers to their types, after the route has returned, and therefore outside the route's error handler. On the affected releases the message of such a failure names the class of the value being converted, carries the value's string form, and ends with the class name and message of the underlying cause, so a remote CoAP client could read internal detail about the deployment: class and package names, the string form of the value, such as the path of a file body, and whatever the cause carries, which in practice can include paths, host names and connection detail of a backend. The consumer had no option to suppress this, unlike the HTTP consumers, which offer a muteException option for that purpose. The exception raised by a failing route was not sent: the consumer did not check whether the exchange had failed, and answered a route failure with 2.05 Content and whatever body the message held at that point. Reaching the disclosure therefore requires a route whose completed response a remote client can make unconvertible, which depends on how the route is written.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. The upgrade is enough on its own: the new muteException consumer option defaults to true on all three fixed release lines, so the error response carries no payload without any configuration change. For deployments that cannot upgrade immediately, make sure the response can always be built once the route has completed: convert the body to byte[] or String as the last step of each route that consumes from a coap endpoint, for example with convertBodyTo, give the CamelCoapMaxAge and CamelCoapETag headers only values of their own types, and add an onException handler that marks the failure as handled and sets the response body explicitly, so that a conversion failure is raised and replaced inside the route rather than in the consumer. |
| In multiple functions of DevicePolicyManagerService.java, there is a possible desync from persistence due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| The Car Dealer (Dealership) and Vehicle sales WordPress plugin through 4.73 does not restrict its unauthenticated single-listing AJAX action to published content, allowing an unauthenticated attacker to read the title, content and metadata of any private, draft, pending, future or trashed post by supplying its numeric id. |
| In setGlobalProxy of DevicePolicyManagerService.java, there is a possible desync in persistence due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of DevicePolicyManagerService.java, there is a possible way to hide a system critical package due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of ubsan_throwing_runtime.cpp, there is a possible way to cause a system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
