| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Validation of Consistency within Input vulnerability in the l2cpd process of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent unauthenticated Layer 2 attacker to cause a denial of service in associated Layer 2 control protocols via a crafted MVRP Ethernet frame sent to an MVRP-enabled interface. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Do not skip unrelated mode changes in DSC validation
Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in
atomic check"), amdgpu resets the CRTC state mode_changed flag to false when
recomputing the DSC configuration results in no timing change for a particular
stream.
However, this is incorrect in scenarios where a change in MST/DSC configuration
happens in the same KMS commit as another (unrelated) mode change. For example,
the integrated panel of a laptop may be configured differently (e.g., HDR
enabled/disabled) depending on whether external screens are attached. In this
case, plugging in external DP-MST screens may result in the mode_changed flag
being dropped incorrectly for the integrated panel if its DSC configuration
did not change during precomputation in pre_validate_dsc().
At this point, however, dm_update_crtc_state() has already created new streams
for CRTCs with DSC-independent mode changes. In turn,
amdgpu_dm_commit_streams() will never release the old stream, resulting in a
memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to
the new stream either, which manifests as a use-after-free when the stream gets
disabled later on:
BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu]
Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977
Workqueue: events drm_mode_rmfb_work_fn
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
print_address_description.constprop.0+0x88/0x320
? dc_stream_release+0x25/0x90 [amdgpu]
print_report+0xfc/0x1ff
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x225/0x4e0
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_report+0xe1/0x180
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_check_range+0x125/0x200
dc_stream_release+0x25/0x90 [amdgpu]
dc_state_destruct+0x14d/0x5c0 [amdgpu]
dc_state_release.part.0+0x4e/0x130 [amdgpu]
dm_atomic_destroy_state+0x3f/0x70 [amdgpu]
drm_atomic_state_default_clear+0x8ee/0xf30
? drm_mode_object_put.part.0+0xb1/0x130
__drm_atomic_state_free+0x15c/0x2d0
atomic_remove_fb+0x67e/0x980
Since there is no reliable way of figuring out whether a CRTC has unrelated
mode changes pending at the time of DSC validation, remember the value of the
mode_changed flag from before the point where a CRTC was marked as potentially
affected by a change in DSC configuration. Reset the mode_changed flag to this
earlier value instead in pre_validate_dsc().
(cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b) |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix handling of NFSEXP_PNFS in the netlink codepath
The rework of how block layouts were checked moved the check for
NFSEXP_PNFS out of nfsd4_setup_layout_type() and into the callers. That
patch didn't account for the new call in nfsd4_setup_layout_type(). |
| Improper Access Control vulnerability in Apache Traffic Server.
This issue affects Apache Traffic Server: from 9.0.0 through 9.2.14, from 10.0.0 through 10.1.3.
Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fixes the issue.
This CVE supersedes CVE-2026-41920, whose record listed the affected 9.x versions as 9.0.0 through 9.1.14 and the fixed version as 9.1.15. All 9.2.x releases before 9.2.15 are affected. |
| `@bsv/wallet-toolbox` provides BRC-100 wallet signing and storage components, while `@bsv/wallet-toolbox-client` and `@bsv/wallet-toolbox-mobile` provide client-focused distributions for standard and mobile applications using wallet storage services. A vulnerability in these packages causes transactions created through a remote `StorageClient` to trust output locking scripts returned by the storage provider without verifying that they match the outputs requested by the caller. A malicious or compromised storage provider can substitute a recipient script or inject an additional output, causing the wallet to sign and broadcast a transaction that redirects funds while the application and user interface continue to display the intended recipient. Source and npm publication history indicate that stable versions `@bsv/wallet-toolbox` and `@bsv/wallet-toolbox-client` from 1.1.47 through 2.3.3, and `@bsv/wallet-toolbox-mobile` from its initial 1.3.21 release through 2.3.3, are affected. All three packages are patched in version 2.4.0. Applications unable to upgrade should avoid remote `StorageClient` providers, use local storage, or independently verify every transaction output’s locking script and value against the original request before signing |
| Improper validation of consistency within input in Windows TCP/IP allows an unauthorized attacker to bypass a security feature over a network. |
| A flaw was found in the keycloak-services component of Keycloak, which handles OpenID Connect (OIDC) authentication flows. The issue occurs because the security check designed to prevent HTTP parameter pollution only inspects the query portion of a redirect URL and ignores the fragment portion. When a client is configured with a wildcard redirect URI, an attacker can use this to inject duplicate security parameters into the login response. If a client application is not configured correctly, it might trust the attacker's injected data instead of the real security information from Keycloak, leading to session fixation or account confusion. |
| In the Linux kernel, the following vulnerability has been resolved:
block: validate user space vectors during extraction
The bio-based drivers don't necessarily check the alignment split, and
stacking block drivers don't always handle a misalignment detected after
submitting the bio. Validate user vectors against the device's
dma_alignment as the bio is built from the iov_iter, rejecting
misaligned early with -EINVAL. |
| The rpcap client code that processes a RPCAP_MSG_PACKET message received from the server incorrectly validates its headers. A malicious server can send a crafted message and cause the client to treat up to 20 bytes of the client process memory beyond the end of the buffer as if it was a part of the captured packet. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly. |
| The OpenRGB network protocol allows attackers to cause memory exhaustion and out-of-bounds memory reads and writes by passing inconsistent data. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/mtier: fail early if address range parameters are invalid
The comment on top of `struct damon_region` clearly says that
For any use case, @ar should be non-zero positive size.
which is now verified in damon_verify_new_region() if the kernel is built
with DAMON_DEBUG_SANITY.
The WARN_ONCE() can be triggered if the mtier sample module is enabled
before node{0,1}_{start,end}_addr have been properly initialized, which is
obviously not good.
------------[ cut here ]------------
start 0 >= end 0
WARNING: mm/damon/core.c:217 at damon_new_region+0xf4/0x118, CPU#59: bash/341468
Call trace:
damon_new_region+0xf4/0x118 (P)
damon_set_regions+0xfc/0x3c0
damon_sample_mtier_build_ctx+0xe8/0x3a8
damon_sample_mtier_start+0x1c/0x90
damon_sample_mtier_enable_store+0x98/0xb0
param_attr_store+0xb4/0x128
module_attr_store+0x2c/0x50
sysfs_kf_write+0x58/0x90
kernfs_fop_write_iter+0x16c/0x238
vfs_write+0x2c0/0x370
ksys_write+0x74/0x118
__arm64_sys_write+0x24/0x38
invoke_syscall+0xa8/0x118
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x54/0x370
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
---[ end trace 0000000000000000 ]---
Note that the same issue can happen if detect_node_addresses is true, and
node 0 or 1 is memoryless. Fix it together by checking the validity of
parameters right before damon_new_region() and fail early if they're
invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate index block header more strictly
Modify ntfs_index_block_inconsisent() to perform stricter validation of
INDEX_HEADER geometry in INDX blocks, and update
ntfs_lookup_inode_by_name() to use that function to validate INDX
blocks. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate resident index root values on lookup
Resident $INDEX_ROOT values carry index header fields that callers
consume after lookup. Some callers already validate parts of the layout
before walking entries, but those checks are scattered and do not cover
all root header invariants, such as entries_offset alignment and lower
bound, index_length, and allocated_size consistency.
The resident root resize paths now keep these header fields consistent
while the value size changes: ntfs_ir_truncate() lowers
index.allocated_size before shrinking the resident value, and
ntfs_ir_reparent() grows the resident value before publishing a larger
root header. Lookup-time validation can therefore cover these invariants
without tripping over the driver's own resize paths.
Add $INDEX_ROOT to the minimum resident value size table and validate the
resident index header fields before returning the attribute from lookup.
Require 8-byte aligned index header fields, a sane entries_offset, an
index_length within allocated_size, allocated_size within the resident
value, and enough entry space for at least an index entry header.
The shared validator already rejects non-resident records for
resident-only attribute types, including $INDEX_ROOT. |
| An issue was discovered in OpenStack Keystone before 29.0.2. POST /v3/credentials did not validate that the caller-supplied project_id for an EC2-type credential matched the project of the authenticating application credential. This allowed an attacker holding an unrestricted application credential for project A to create an EC2 credential targeting project B; a subsequent /v3/ec2tokens exchange would then issue a Keystone token scoped to project B while still carrying the original app_cred_id, enabling cross-project lateral movement within the credential owner's role footprint. |
| CVAT is an open source interactive video and image annotation tool for computer vision. From 2.17.0 until 2.72.0, a user with write access to a CVAT job can submit a batch automatic annotation request to RequestViewSet.create with inconsistent task and job IDs, and because the task ID determines the single active request slot, block automatic annotation for another task whose ID is known. This issue is fixed in version 2.72.0. |
| A flaw was found in Keycloak, an open-source identity and access management solution. When a client application is configured to accept broad redirect Uniform Resource Identifiers (URIs), a remote attacker can manipulate the authentication process by crafting a special web address. If a user clicks this link, the client application might incorrectly prioritize attacker-controlled information over legitimate data. This vulnerability, known as HTTP parameter pollution, could allow an attacker to bypass security measures or gain unauthorized access to resources. |
| A flaw exists in the org.keycloak.broker.oidc package where the OIDC broker incorrectly synchronizes the email_verified claim. When an OIDC identity provider is configured with trustEmail=true and the userinfo endpoint is enabled, Keycloak retrieves the email address from the userinfo response but retrieves the email_verified status exclusively from the id_token.
The root cause is a lack of validation ensuring that the email_verified claim in the id_token actually refers to the email address returned by the userinfo endpoint. If these two sources return different email addresses, the id_token's email_verified=true claim is blindly applied to the userinfo email.
Exploitation Conditions:
The OIDC identity provider must have trustEmail set to true (non-default).
The userinfo endpoint must be enabled (default).
The attacker must control or have compromised the upstream OIDC provider.
Concrete Impact:
Mark arbitrary email addresses as verified in the Keycloak database.
Bypass email-based security controls or verification workflows.
Potential account takeover if the application relies solely on the email_verified flag from the IdP to link accounts. |
| Improper validation of consistency within input in Windows Secure Kernel Mode allows an authorized attacker to elevate privileges locally. |
| The webp decoder can panic when processing a VP8 chunk with dimensions that do not match the canvas size. |
