| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Missing exception handlers in AvastSvc native message dispatcher (ashServ.dll) on Windows allow a local, unprivileged attacker to crash the service by sending specially crafted JSON messages.
The vulnerability spans multiple handler pathways in the RPC-based native message protocol:
* Log_NmSvc.message handler: converts JSON fields to strings without type validation and without exception boundaries.
* OpenInSz_NmSvc handler: converts URL and origin fields to strings without type checking, exposing an exception.
* OpenInSz_NmSvc.profile handler: converts the profile field to an integer without validation.
In all three cases, the exceptions are not caught by action-specific handlers and propagate up the dispatcher. The common root cause is the absence of try-catch blocks around JSON type conversions in the native message processing chain. |
| A flaw was found in SSSD. When configured to evaluate password expiration warnings before restrictive access rules in LDAP (Lightweight Directory Access Protocol) environments, an expired-password warning terminates rule evaluation early and treats the access request as successful. A remote authenticated user with an expired password using an alternative authentication method, such as SSH public key authentication, can exploit this flaw to bypass access control restrictions and gain unauthorized access to protected systems. |
| In the Linux kernel, the following vulnerability has been resolved:
udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=n
When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0
(success) without actually creating a socket. Callers such as
fou_create() then proceed to dereference the uninitialized socket
pointer, resulting in a NULL pointer dereference.
The captured NULL deref crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764)
[...]
Call Trace:
<TASK>
genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209)
[...]
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
genl_rcv (net/netlink/genetlink.c:1219)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1))
__sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1))
__x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130)
This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so
callers correctly take their error paths. There is only one caller of
the vulnerable function and only privileged users can trigger it. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. Prior to 1.18.6, a process inside a sandbox could send MSGID_FILE_SET_ATTRIBUTES or MSGID_FILE_SET_SHORT_NAME to SbieSvc and cause the SYSTEM service to open and modify an existing file outside the sandbox. The direct primitive changes file attributes, timestamps, writeability, or 8.3 short names; a short-name redirection can additionally contribute to SYSTEM code execution when a privileged process resolves an attacker-controlled short-name path in a location SbieSvc can open. This vulnerability is fixed in 1.18.6. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: fix xa_alloc_cyclic() error handling
In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will
be returned, which will cause IS_ERR() to be false. Which can lead to
dereference not allocated pointer (rel).
Fix it by checking if err is lower than zero.
This wasn't found in real usecase, only noticed. Credit to Pierre. |
| In the Linux kernel, the following vulnerability has been resolved:
dpll: fix xa_alloc_cyclic() error handling
In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will
be returned, which will cause IS_ERR() to be false. Which can lead to
dereference not allocated pointer (pin).
Fix it by checking if err is lower than zero.
This wasn't found in real usecase, only noticed. Credit to Pierre. |
| In updateState of GraphicsDriverEnableAngleAsSystemDriverController.java, there is a possible persistent dos issue due to an unusual root cause. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A flaw was found in libssh when using the ChaCha20 cipher with the OpenSSL library. If an attacker manages to exhaust the heap space, this error is not detected and may lead to libssh using a partially initialized cipher context. This occurs because the OpenSSL error code returned aliases with the SSH_OK code, resulting in libssh not properly detecting the error returned by the OpenSSL library. This issue can lead to undefined behavior, including compromised data confidentiality and integrity or crashes. |
| ModSecurity is an open source, cross platform web application firewall (WAF) engine for Apache, IIS and Nginx. From 3.0.5 until 3.0.17, the PCRE2 implementation of @rxGlobal in src/utils/regex.cc converts pcre2_match match-limit errors into an ordinary no-match result instead of propagating a non-OK RegexResult. When attacker-controlled input exhausts SecPcreMatchLimit, rules that rely on MSC_PCRE_LIMITS_EXCEEDED or its TX compatibility indicator do not run, so a request that should be rejected can pass through the WAF. The issue affects PCRE2 deployments that use @rxGlobal with a limit-exhaustible expression and a compensating rule; it is not a universal WAF bypass. This issue is fixed in version 3.0.17. |
| A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client's memory resource first, turning the attack complexity high. |
| A flaw was found in rsync. It could allow a server to enumerate the contents of an arbitrary file from the client's machine. This issue occurs when files are being copied from a client to a server. During this process, the rsync server will send checksums of local data to the client to compare with in order to determine what data needs to be sent to the server. By sending specially constructed checksum values for arbitrary files, an attacker may be able to reconstruct the data of those files byte-by-byte based on the responses from the client. |
| Improper handling of a failed memory remap in Firecracker versions 0.23.0 through 1.16.1 might allow a guest user with root privileges to read or modify Firecracker VMM process memory via balloon or virtio-mem discard requests on microVMs restored from a snapshot with the File memory backend, if the host fails to create the replacement mapping.
To remediate this issue, users should upgrade to Firecracker 1.16.2 or 1.17.0 and later. |
| In the Linux kernel, the following vulnerability has been resolved:
keys/trusted_keys: return immediately after TPM unseal failure
trusted_tpm_unseal() proceeds to pcrlock() when the TPM unseal operation
fails. If pcrlock() succeeds, its return value overwrites the unseal error,
causing key instantiation to succeed.
Return immediately when unseal fails to preserve the original error. |
| Memory corruption may occur while processing IOCTL call for DMM/WARPNCC CONFIG request. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: bound LBLCR and LBLC cache growth
ip_vs_lblcr_new() and ip_vs_lblc_new() create cache entries for
every previously unseen destination address. The table max_size only
tells the periodic collector to reclaim entries after the cache has
already exceeded the limit. It does not reclaim entries that the
attacker continues to use.
Reject new cache entries once either table reaches max_size * 3 / 2.
The extra headroom lets the periodic collector catch up while the
existing scheduler fallback continues to use the selected destination
when cache creation fails. New traffic therefore stays serviceable
without growing the tables further. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: mpfs: fix unchecked devm_clk_get() error pointer in probe()
devm_clk_get(&pdev->dev, "rtcref")'s return value was passed straight
into clk_get_rate() without checking it for an error first, unlike the
"rtc" clock a few lines above which is correctly checked with
IS_ERR(). clk_get_rate() only guards against a NULL clk, not an error
pointer:
if (!clk)
return 0;
...
rate = clk_core_get_rate_recalc(clk->core);
so if devm_clk_get() ever returns an error pointer here (for example
ERR_PTR(-EPROBE_DEFER), which is the normal, expected outcome if the
clkcfg clock-provider this RTC depends on has not registered its
clocks yet by the time this driver probes), clk_get_rate() dereferences
that error pointer instead of returning 0, crashing instead of letting
probe defer.
Capture the clock in the existing 'clk' local and check it with
IS_ERR() before calling clk_get_rate(), matching the handling already
used for the "rtc" clock in this same function. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: fix IRQ storm on invalid event buffer count
When dwc3_check_event_buf() reads a GEVNTCOUNT value exceeding the
event buffer length, commit 63ccd26cd1f6 ("usb: dwc3: gadget: check
that event count does not exceed event buffer length") returns IRQ_NONE
without writing back GEVNTCOUNT. Since the DWC3 interrupt is
level-triggered, the uncleared IRQ source keeps the line asserted,
causing a tight IRQ storm that accumulates 99,900 unhandled interrupts
and triggers spurious.c:184 BUG -> kernel panic.
The resulting call stack:
__report_bad_irq+0xac/0xc8
note_interrupt+0x340/0x468
handle_irq_event+0xac/0xc0
handle_fasteoi_irq+0x120/0x228
gic_handle_irq+0x68/0x108
...
kernel BUG at kernel/irq/spurious.c:184
To reproduce, write a bogus value exceeding the event buffer length
directly to the GEVNTCOUNT register:
devmem <DWC3_BASE + 0xc40c> 4 0x1004
Write the bogus count back to GEVNTCOUNT to clear the IRQ source,
consistent with the stale event clearing pattern in
dwc3_event_buffers_setup(), and schedule error recovery to
reinitialize the controller. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: recover after failure to start the frs ams
Reset the port if the tcpm fails to start the FAST_ROLE_SWAP AMS by
initiating error recovery on it.
This helps in cases where some cables (incorrectly) signal an FRS to
an FRS capable port during disconnection. The TCPC autonomously starts
sourcing VBUS on detecting the FRS signal. However, the VBUS sourcing is
left on when the FAST_ROLE_SWAP AMS fails to start (as tcpm_sink_tx_ok
is 0 as CC is open due to the cable disconnect). This is because the
code sets the state to INVALID_STATE without resetting the port state.
Log snippet before changes:
[ 101.401960] AMS FAST_ROLE_SWAP start
[ 101.401971] Sink TX No Go
[ 101.401982] sourcing vbus
[ 101.401987] VBUS on
[ 101.402159] VBUS on
[ 109.257809] CC1: 0 -> 0, CC2: 5 -> 0 [state SNK_READY, polarity 1, disconnected]
[ 111.267442] VBUS on
After changes:
[ 70.541211] AMS FAST_ROLE_SWAP start
[ 70.541220] Sink TX No Go
[ 70.541228] state change SNK_READY -> ERROR_RECOVERY [rev3 NONE_AMS]
[ 70.541362] VBUS on
[ 70.541365] sourcing vbus
[ 70.541367] VBUS on
[ 70.541374] state change ERROR_RECOVERY -> PORT_RESET [rev3 NONE_AMS]
[ 70.541410] disable vbus discharge ret:0
[ 70.543028] Setting usb_comm capable false
[ 70.544009] Setting voltage/current limit 0 mV 0 mA
[ 70.544034] polarity 0
[ 70.544239] Requesting mux state 0, usb-role 0, orientation 0
[ 70.555550] cc:=0
[ 70.555595] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS]
[ 70.555697] VBUS off
[ 70.555702] VBUS VSAFE0V
[ 70.555762] CC1: 5 -> 0, CC2: 0 -> 0 [state PORT_RESET, polarity 0, disconnected]
[ 70.587794] VBUS off
[ 70.587799] VBUS VSAFE0V
[ 70.655672] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 70.655682] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev3 NONE_AMS]
[ 70.655686] Start toggling
[ 70.656274] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout
Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a
condition that is never fulfilled, the CPU busy-waits for prolonged time
and the timeout triggers only with a massive delay causing a CPU stall.
This happens due to a huge underestimation of wall clock time in
poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use
timekeeping in read_poll_timeout_atomic()") changed the behavior to no
longer use ktime_get at the expense of underestimation of wall clock
time which appears to be very large for delay_us=0. Instead of timing
out after approximately XILINX_DMA_LOOP_COUNT microseconds, the timeout
takes XILINX_DMA_LOOP_COUNT * 1000 * (time that the overhead of the for
loop in poll_timeout_us_atomic takes) which is in the range of several
minutes for XILINX_DMA_LOOP_COUNT=1000000. Fix this by using a non-zero
value for delay_us. Use delay_us=10 to keep the delay in the hot path of
starting DMA transfers minimal but still avoid CPU stalls in case of
unexpected hardware failures.
One-off measurement with delay_us=0 causes the cpu to busy wait around 7
minutes in the timeout case. After applying this patch with delay_us=10
the measured timeout was 1053428 microseconds which is roughly
equivalent to the expected 1000000 microseconds specified in
XILINX_DMA_LOOP_COUNT.
Add a constant XILINX_DMA_POLL_DELAY_US for delay_us value. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: free zones array on device power-off
null_init_zoned_dev() allocates dev->zones when a zoned device is powered
on, but null_del_dev() never frees it on power-off; dev->zones is only
freed later in null_free_dev(), when the configfs directory is removed. If
the device is powered off and then on again, null_init_zoned_dev()
allocates a new array and overwrites the dev->zones pointer, leaking the
previous allocation each power cycle.
Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it.
And calling null_free_zoned_dev() in null_free_dev() is no longer necessary
because every caller already invokes null_del_dev() first: via
nullb_group_drop_item() before nullb_device_release(), in the
null_add_dev() error path of null_create_dev(), and in null_destroy_dev().
Remove the redundant call.
And take &lock around zone_cond_store() in the two store wrappers to
serialize dev->zones check-and-deref against its alloc/free, which already
run under &lock. The reason there was no problem before is that only
nullb_device_release() or null_exit() frees the dev->zones, which
guarantees that subsequent users won't access the configfs interface. |
