| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Use krealloc_array() in dal_vector_reserve()
[Why & How]
dal_vector_reserve() computes the allocation size as
"capacity * vector->struct_size" using uint32_t arithmetic, which can
silently wrap to a small value on overflow. This would cause krealloc to
return a smaller buffer than expected, leading to heap overflows on
subsequent vector appends.
Replace krealloc() with krealloc_array() which performs an internal
overflow check and returns NULL on wrap, preventing the issue.
(cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level
When recovering hugepages in the shadow MMU, verify that the base gfn of
the shadow page is actually contained within the target memslot, *before*
querying the max mapping level given the shadow page's gfn. Failure to
pre-check the validity of the gfn can lead to an out-of-bounds access to
the slot's lpage_info (which typically manifests as a host #PF because the
lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its
PTEs) that extends "below" the bounds of a memslot.
When faulting in memory for a guest, and the size of the guest mapping is
greater than KVM's (current) max mapping, then KVM will create a "direct"
shadow page (direct in that there are no gPTEs to shadow, and so the target
gfn is a direct calculation given the base gfn of the shadow page). The
hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB
mappings when dirty logging generates the guest > host mapping size case.
When the 4KiB restriction is lifted, then KVM can replace the shadow page
with a hugepage.
But if KVM originally used a smaller mapping than the guest because the
range of memory covered by the guest hugepage exceeds the bounds of a
memslot, then KVM will link a direct shadow page with a gfn that is outside
the bounds of the memslot being used to fault in memory. The rmap entry
added for the leaf mapping is correct and within bounds, but the gfn of the
leaf SPTE's parent shadow page will be out of bounds.
BUG: unable to handle page fault for address: ffffc90000806ffc
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0
Oops: Oops: 0000 [#1] SMP
CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm]
Call Trace:
<TASK>
kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm]
kvm_set_memslot+0x1ee/0x590 [kvm]
kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm]
kvm_vm_ioctl+0x9bf/0x15d0 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb7/0xbb0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f21c0f1a9bf
</TASK>
Don't bother pre-checking the bounds of the potential hugepage, i.e. don't
check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also
within the memslot, as the checks performed by kvm_mmu_max_mapping_level()
are a superset of the basic bounds checks. I.e. pre-checking the full
range would be a dubious micro-optimization. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
1) XSA-437 (CVE-2023-34321) addressed issues with overflows in
calculations involved in guests flushing caches through
GNTTABOP_cache_flush. Unfortunately the fix there introduced a
calculation which may underflow, resulting in a loop which would - at
least on 64-bit Arm - take excessively long, and which would likely
eventually crash the hypervisor.
This is CVE-2026-102699.
2) GNTTABOP_cache_flush may be issued on memory mapped from another
domain using the grant table interface. However there was no
restriction to disallow the use of invalidate-without-clean against
read-only grant mappings, which may corrupt the granted memory.
This is CVE-2026-102702. |
| A stack-based buffer overflow vulnerability in the log message functionality could allow an unauthenticated attacker to achieve code execution. |
| A stack-based buffer overflow vulnerability in the Cookie parsing methods could allow an unauthenticated attacker to achieve code execution when the SafeEnhancement feature is enabled. |
| A stack-based buffer overflow vulnerability in the upload functionality could allow an authenticated attacker to achieve code execution. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
1) XSA-437 (CVE-2023-34321) addressed issues with overflows in
calculations involved in guests flushing caches through
GNTTABOP_cache_flush. Unfortunately the fix there introduced a
calculation which may underflow, resulting in a loop which would - at
least on 64-bit Arm - take excessively long, and which would likely
eventually crash the hypervisor.
This is CVE-2026-102699.
2) GNTTABOP_cache_flush may be issued on memory mapped from another
domain using the grant table interface. However there was no
restriction to disallow the use of invalidate-without-clean against
read-only grant mappings, which may corrupt the granted memory.
This is CVE-2026-102702. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: catc: bound the RX packet length in catc_rx_done()
catc_rx_done() walks a multi-packet URB, reading a two-byte length from
each packet header. Its bound, pkt_len > urb->actual_length, ignores the
header offset and compares against the whole transfer rather than the
bytes left from pkt_start, so a crafted packet header makes
skb_copy_to_linear_data() read past the buffer.
A length below ETH_HLEN is also accepted, including zero, and
eth_type_trans() then reads a MAC header from the uninitialised tailroom
of a shorter skb. The is_f5u011 branch takes its length straight from
the transfer, so a zero-length URB reaches the same path.
Track the bytes remaining from the current packet, and reject a header
that does not fit, a length past what is left, and a length below an
Ethernet header.
A transfer shorter than an Ethernet header, including a zero-length one,
previously became a runt skb passed to netif_rx() and counted as
received; it is now counted in rx_length_errors and ends the walk. |
| Integer overflow in OpenModSim (<=1.11.0), leading to denial of service |
| Stack-based buffer overflow in Microsoft Exchange Online allows an authorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: drop truncated I/RR/RNR PDUs in nfc_llcp_recv_hdlc()
nfc_llcp_recv_hdlc() reads the sequence byte skb->data[2], via
nfc_llcp_ns()/nfc_llcp_nr(), before any length check. The receive path
only guarantees the two-byte LLCP header -- __nfc_llcp_recv() checks it
with pskb_may_pull() and nfc_llcp_recv_agf() admits two-byte inner PDUs
-- so a two-byte I, RR or RNR PDU reads one byte of uninitialised skb
tailroom. The byte becomes N(R)/N(S); a peer can already set those with
a well-formed PDU, so this is acting on uninitialised memory, not new
peer control.
Guard the read with pskb_may_pull(), as commit 95674f506c63 ("nfc: llcp:
reject PDUs shorter than the LLCP header") did for the two-byte header,
so the sequence byte is present and linear before it is read. RR and RNR
PDUs are LLCP_HEADER_SIZE + LLCP_SEQUENCE_SIZE bytes and an I PDU is
longer, so no valid frame is rejected; a truncated PDU is malformed, so
return without a DM reply. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate device-supplied DMA indices
In btintel_pcie_msix_rx_handle(), the driver processes RX completion
descriptors (urbd1) written by the PCIe device into DMA-coherent memory.
urbd1->frbd_tag (a 16-bit field fully controlled by the device firmware
via DMA) is used directly as an array index into rxq->bufs[] without any
bounds check. rxq->bufs[] has only BTINTEL_PCIE_RX_DESCS_COUNT (64)
entries, while frbd_tag can be any value 0-65535. A malicious or
malfunctioning device can write an out-of-range frbd_tag, causing the
driver to dereference an out-of-bounds data_buf pointer.
Additionally, cr_hia is read from a DMA-shared index array also writable
by the device; if the device sets cr_hia >= rxq->count, the while-loop
never terminates because cr_tia is wrapped via modulo rxq->count and can
never equal an out-of-range cr_hia.
Add bounds validation for cr_hia and frbd_tag in the RX path, and cr_hia
in the TX path. Log invalid values with bt_dev_err before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: samsung-dsim: fix TE GPIO lifetime for host attach
When the Exynos DSI driver was generalized into samsung-dsim, the TE
GPIO acquisition was switched from gpiod_get_optional() to
devm_gpiod_get_optional() while keeping the matching gpiod_put() calls.
That combination is wrong for a managed descriptor.
However, dropping the puts and keeping the managed get is also wrong:
samsung_dsim_register_te_irq() runs from the DSI host attach callback,
and host detach/reattach can happen without destroying the device that
owns the managed action. A second attach would then request the GPIO
again without having released it.
Switch back to a non-managed gpiod_get_optional() and keep the explicit
gpiod_put() on the request_irq() error path and in
samsung_dsim_unregister_te_irq().
[Luca: remove unnecessary comment] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/clk: fix list cursor use after loop in nvkm_clk_ustate_update
If list_for_each_entry() exits without hitting a break then "pstate" is
not a valid pstate pointer. Introduce a "found" variable instead.
The check is reachable from userspace: nvkm_clk_ustate_update() takes the
pstate id straight from the 'pstate' debugfs file, so requesting an id
that is not in clk->states - or any id at all when the perf tables are
broken and the list is empty - makes the pstate->pstate != req test
dereference the list head cast to a struct nvkm_pstate, which is an
out-of-bounds read.
[Francesco: rebased on drm-misc-next, expanded the commit message] |
| Mongoose is an embedded web server and network library. Prior to 7.23, the built-in TLS stack selected by MG_TLS_BUILTIN in src/tls_builtin.c accepts a TLS 1.3 record whose decrypted size is exactly the 16-byte authentication tag with no plaintext or ContentType byte. In mg_tls_recv_record(), the msgsz length check permits that record and the recv_len calculation underflows to SIZE_MAX, so a later handshake step treats stale buffer contents as a trusted message with an effectively unbounded length. An unauthenticated malicious TLS peer can trigger a heap out-of-bounds read before certificate or Finished validation, causing a remote denial of service. This issue is fixed in version 7.23. |
| Mongoose is an embedded web server and network library. Prior to 7.23, the built-in TLS certificate parser selected by MG_TLS_BUILTIN fails to verify that a long-form DER element length fits within the remaining certificate buffer. In mg_der_to_tlv() and mg_der_next(), a peer-controlled length can advance the parser beyond the certificate and underflow the remaining uint32_t length, causing mg_tls_parse_cert_der() to continue walking an invalid pointer. An unauthenticated malicious TLS server, or a client presenting a certificate to a server configured for client certificates, can trigger an out-of-bounds read and denial of service during the handshake. This issue is fixed in version 7.23. |
| Mongoose is an embedded web server and network library. Prior to 7.23, ppp_handle_ipv6cp() in src/l2_ppp.c trusts the 16-bit IPv6CP len field without checking it against the received payload size. On a PPP or PPPoE link using MG_ENABLE_TCPIP and MG_ENABLE_IPV6, an unauthenticated adjacent peer can complete the required LCP exchange and send a short Configure-Request with an oversized length, causing ppp_tx_frame() to read beyond recv_queue.buf and write beyond tx.buf. The same length misuse can also expose adjacent heap bytes in a reply or hang the event loop through find_opt(). This issue is fixed in version 7.23. |
| FileRise is a self-hosted web-based file manager with multi-file upload, editing, and batch operations. From 3.9.0 until 3.22.0, pristine manual FileRise installations without PERSISTENT_TOKENS_KEY or metadata/persistent_tokens.key can activate a published legacy compatibility key. If an attacker separately obtains ciphertext-bearing account or configuration files, the known fallback key can enable decryption of TOTP secrets or credentials. Docker installations already generated a unique persistent key, and existing installations are not automatically rotated because doing so could make encrypted state unreadable. This issue is fixed in version 3.22.0. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Use a 32-bit compare in xsk_map_gen_lookup
xsk_map_gen_lookup() loads a u32 key and compares it with max_entries
using BPF_JMP_IMM. BPF immediates are sign-extended to 64 bits, so a
max_entries value of 0x80000000 or higher becomes a threshold larger
than every zero-extended 32-bit key. An out-of-range index then skips
the bounds check and the generated lookup reads past xsk_map[].
Compare with BPF_JMP32_IMM so the check stays in 32-bit unsigned range. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: Validate PCI BAR size before mapping
The amd_sfh driver maps PCI BAR 2 using pcim_iomap_regions() and
subsequently accesses MMIO registers at offsets up to 0x10958 (e.g.,
AMD_P2C_MSG3 at 0x1068C). However, the driver never validates that the BAR
size is large enough to cover these accesses. If the driver is bound to a
device with a smaller BAR 2, this leads to an out-of-bounds memory access
and a page fault during the probe function.
For example, a page fault can occur when reading from privdata->mmio +
AMD_P2C_MSG3 in mp2_select_ops():
BUG: unable to handle page fault for address: ffffc9000390368c
PGD 100000067 P4D 100000067 PUD 1012c1067 PMD 105b64067 PTE 0
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:mp2_select_ops drivers/hid/amd-sfh-hid/amd_sfh_pcie.c:282
[inline]
RIP: 0010:amd_mp2_pci_probe+0x337/0x5f0
drivers/hid/amd-sfh-hid/amd_sfh_pcie.c:487
Call Trace:
<TASK>
local_pci_probe drivers/pci/pci-driver.c:332 [inline]
pci_call_probe drivers/pci/pci-driver.c:394 [inline]
__pci_device_probe drivers/pci/pci-driver.c:455 [inline]
pci_device_probe+0x431/0xc90 drivers/pci/pci-driver.c:489
Fix this by verifying that the length of BAR 2 is at least 128KB before
attempting to map it. Since the maximum accessed offset is 0x10958, and PCI
BAR sizes are powers of 2, any legitimate hardware will have a BAR size of
at least 128KB. |
