| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A weakness has been identified in MineAdmin 1.x/2.x. This impacts the function refresh of the file /system/refresh of the component JWT Token Handler. This manipulation causes insufficient verification of data authenticity. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is said to be difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| Hono is a Web application framework that provides support for any JavaScript runtime. In versions 4.12.0 and 4.12.1, when using the AWS Lambda adapter (`hono/aws-lambda`) behind an Application Load Balancer (ALB), the `getConnInfo()` function incorrectly selected the first value from the `X-Forwarded-For` header. Because AWS ALB appends the real client IP address to the end of the `X-Forwarded-For` header, the first value can be attacker-controlled. This could allow IP-based access control mechanisms (such as the `ipRestriction` middleware) to be bypassed. Version 4.12.2 patches the issue. |
| Unitree Go2 firmware versions 1.1.7 through 1.1.11, when used with the Unitree Go2 Android application (com.unitree.doggo2), are vulnerable to remote code execution due to missing integrity protection and validation of user-created programmes. The Android application stores programs in a local SQLite database (unitree_go2.db, table dog_programme) and transmits the programme_text content, including the pyCode field, to the robot. The robot's actuator_manager.py executes the supplied Python as root without integrity verification or content validation. An attacker with local access to the Android device can tamper with the stored programme record to inject arbitrary Python that executes when the user triggers the program via a controller keybinding, and the malicious binding persists across reboots. Additionally, a malicious program shared through the application's community marketplace can result in arbitrary code execution on any robot that imports and runs it. |
| Flux notification-controller is the event forwarder and notification dispatcher for the GitOps Toolkit controllers. Prior to 1.8.3, the gcr Receiver type in Flux notification-controller does not validate the email claim of Google OIDC tokens used for Pub/Sub push authentication. This allows any valid Google-issued token, to authenticate against the Receiver webhook endpoint, triggering unauthorized Flux reconciliations. Exploitation requires the attacker to know the Receiver's webhook URL. The webhook path is generated as /hook/sha256sum(token+name+namespace), where the token is a random string stored in a Kubernetes Secret. There is no API or endpoint that enumerates webhook URLs. An attacker cannot discover the path without either having access to the cluster and permissions to read the Receiver's .status.webhookPath in the target namespace, or obtaining the URL through other means (e.g. leaked secrets or access to Pub/Sub config). Upon successful authentication, the controller triggers a reconciliation for all resources listed in the Receiver's .spec.resources. However, the practical impact is limited: Flux reconciliation is idempotent, so if the desired state in the configured sources (Git, OCI, Helm) has not changed, the reconciliation results in a no-op with no effect on cluster state. Additionally, Flux controllers deduplicate reconciliation requests, sending many requests in a short period results in only a single reconciliation being processed. This vulnerability is fixed in 1.8.3. |
| A cache poisoning vulnerability has been found in the Pingora HTTP proxy framework’s default cache key construction. The issue occurs because the default HTTP cache key implementation generates cache keys using only the URI path, excluding critical factors such as the host header (authority). Operators relying on the default are vulnerable to cache poisoning, and cross-origin responses may be improperly served to users.
Impact
This vulnerability affects users of Pingora's alpha proxy caching feature who relied on the default CacheKey implementation. An attacker could exploit this for:
* Cross-tenant data leakage: In multi-tenant deployments, poison the cache so that users from one tenant receive cached responses from another tenant
* Cache poisoning attacks: Serve malicious content to legitimate users by poisoning shared cache entries
Cloudflare's CDN infrastructure was not affected by this vulnerability, as Cloudflare's default cache key implementation uses multiple factors to prevent cache key poisoning and never made use of the previously provided default.
Mitigation:
We strongly recommend Pingora users to upgrade to Pingora v0.8.0 or higher, which removes the insecure default cache key implementation. Users must now explicitly implement their own callback that includes appropriate factors such as Host header, origin server HTTP scheme, and other attributes their cache should vary on.
Pingora users on previous versions may also remove any of their default CacheKey usage and implement their own that should at minimum include the host header / authority and upstream peer’s HTTP scheme. |
| Gogs is an open source self-hosted Git service. Prior to version 0.14.2, overwritable LFS object across different repos leads to supply-chain attack, all LFS objects are vulnerable to be maliciously overwritten by malicious attackers. This issue has been patched in version 0.14.2. |
| OpenClaw versions prior to 2026.2.2 fail to validate webhook secrets in Telegram webhook mode (must be enabled), allowing unauthenticated HTTP POST requests to the webhook endpoint that trust attacker-controlled JSON payloads. Remote attackers can forge Telegram updates by spoofing message.from.id and chat.id fields to bypass sender allowlists and execute privileged bot commands. |
| Caddy is an extensible server platform that uses TLS by default. From version 2.10.0 to before version 2.11.2, forward_auth copy_headers does not strip client-supplied headers, allowing identity injection and privilege escalation. This issue has been patched in version 2.11.2. |
| OneUptime is a solution for monitoring and managing online services. Prior to 10.0.19, OneUptime's GitHub App callback trusts attacker-controlled state and installation_id values and updates Project.gitHubAppInstallationId with isRoot: true without validating that the caller is authorized for the target project. This allows an attacker to overwrite another project's GitHub App installation binding. Related GitHub endpoints also lack effective authorization, so a valid installation ID can be used to enumerate repositories and create CodeRepository records in an arbitrary project. This vulnerability is fixed in 10.0.19. |
| An issue was discovered in bluetoothd in BlueZ through 5.48. The vulnerability lies in the handling of a SVC_ATTR_REQ by the SDP implementation. By crafting a malicious CSTATE, it is possible to trick the server into returning more bytes than the buffer actually holds, resulting in leaking arbitrary heap data. The root cause can be found in the function service_attr_req of sdpd-request.c. The server does not check whether the CSTATE data is the same in consecutive requests, and instead simply trusts that it is the same. |
| The The Plus Addons for Elementor – Addons for Elementor, Page Templates, Widgets, Mega Menu, WooCommerce plugin for WordPress is vulnerable to Insufficient Verification of Data Authenticity in all versions up to, and including, 6.4.7. This is due to the plugin decrypting and trusting attacker-controlled email_data in an unauthenticated AJAX handler without cryptographic authenticity guarantees. This makes it possible for unauthenticated attackers to tamper with form email routing and redirection values to trigger unauthorized email relay and attacker-controlled redirection via the 'email_data' parameter. |
| Rack::Session is a session management implementation for Rack. From 2.0.0 to before 2.1.2, Rack::Session::Cookie incorrectly handles decryption failures when configured with secrets:. If cookie decryption fails, the implementation falls back to a default decoder instead of rejecting the cookie. This allows an unauthenticated attacker to supply a crafted session cookie that is accepted as valid session data without knowledge of any configured secret. Because this mechanism is used to load session state, an attacker can manipulate session contents and potentially gain unauthorized access. This vulnerability is fixed in 2.1.2. |
| The Rede Itaú for WooCommerce plugin for WordPress is vulnerable to order status manipulation due to insufficient verification of data authenticity in all versions up to, and including, 5.1.2. This is due to the plugin failing to verify the authenticity of payment callbacks. This makes it possible for unauthenticated attackers to manipulate WooCommerce order statuses, either marking unpaid orders as paid, or failed. |
| The Fluent Forms Pro Add On Pack plugin for WordPress is vulnerable to Insufficient Verification of Data Authenticity in all versions up to, and including, 6.1.17. This is due to the PayPal IPN (Instant Payment Notification) verification being disabled by default (`disable_ipn_verification` defaults to `'yes'` in `PayPalSettings.php`). This makes it possible for unauthenticated attackers to send forged PayPal IPN notifications to the publicly accessible IPN endpoint, marking unpaid form submissions as "paid" and triggering post-payment automation (emails, access grants, digital product delivery). |
| When calling base64.b64decode() or related functions the decoding process would stop after encountering the first padded quad regardless of whether there was more information to be processed. This can lead to data being accepted which may be processed differently by other implementations. Use "validate=True" to enable stricter processing of base64 data. |
| There is a vulnerability in the BMC firmware image authentication design
at Supermicro MBD-X12DPG-OA6
. An attacker can modify the firmware to bypass BMC inspection and bypass the signature verification process |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| The Authorize.net Payment Gateway For WooCommerce plugin for WordPress is vulnerable to payment bypass in all versions up to, and including, 8.0. This is due to the plugin not properly verifying the authenticity of the request that updates a orders payment status. This makes it possible for unauthenticated attackers to update order payment statuses to paid bypassing any payment. |
| Insufficient Verification of Data Authenticity vulnerability in GE Vernova UR IED family devices allows an authenticated user to install a modified firmware.
The firmware signature verification is enforced only on the client-side dedicated software Enervista UR Setup, allowing the integration check to be bypassed. |
| Invision Community through 4.7.16 allows remote code execution via the applications/core/modules/admin/editor/toolbar.php IPS\core\modules\admin\editor\_toolbar::addPlugin() method. This method handles uploaded ZIP files that are extracted into the applications/core/interface/ckeditor/ckeditor/plugins/ directory without properly verifying their content. This can be exploited by admin users (with the toolbar_manage permission) to write arbitrary PHP files into that directory, leading to execution of arbitrary PHP code in the context of the web server user. |
