| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper signature verification in AMD CPU ROM microcode patch loader may allow an attacker with local administrator privilege to load malicious microcode, potentially resulting in loss of integrity of x86 instruction execution, loss of confidentiality and integrity of data in x86 CPU privileged context and compromise of SMM execution environment. |
| There is a vulnerability in the BMC firmware image authentication design
at Supermicro MBD-X12DPG-OA6
. An attacker can modify the firmware to bypass BMC inspection and bypass the signature verification process |
| This vulnerability exists in the TP-Link Archer C50 due to improper signature verification mechanism in the firmware upgrade process at its web interface. An attacker with administrative privileges within the router’s Wi-Fi range could exploit this vulnerability by uploading and executing malicious firmware which could lead to complete compromise of the targeted device. |
| Node-SAML is a SAML library not dependent on any frameworks that runs in Node. In versions 5.0.1 and below, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. This issue is fixed in version 5.1.0. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X12STW . An attacker can update the system firmware with a specially crafted image. |
| xml-crypto is an XML digital signature and encryption library for Node.js. An attacker may be able to exploit a vulnerability in versions prior to 6.0.1, 3.2.1, and 2.1.6 to bypass authentication or authorization mechanisms in systems that rely on xml-crypto for verifying signed XML documents. The vulnerability allows an attacker to modify a valid signed XML message in a way that still passes signature verification checks. For example, it could be used to alter critical identity or access control attributes, enabling an attacker to escalate privileges or impersonate another user. Users of versions 6.0.0 and prior should upgrade to version 6.0.1 to receive a fix. Those who are still using v2.x or v3.x should upgrade to patched versions 2.1.6 or 3.2.1, respectively. |
| In the CryptX module before 0.062 for Perl, gcm_decrypt_verify() and chacha20poly1305_decrypt_verify() do not verify the tag. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X12STW-F . An attacker can update the system firmware with a specially crafted image. |
| OpenPGP.js is a JavaScript implementation of the OpenPGP protocol. Startinf in version 5.0.1 and prior to versions 5.11.3 and 6.1.1, a maliciously modified message can be passed to either `openpgp.verify` or `openpgp.decrypt`, causing these functions to return a valid signature verification result while returning data that was not actually signed. This flaw allows signature verifications of inline (non-detached) signed messages (using `openpgp.verify`) and signed-and-encrypted messages (using `openpgp.decrypt` with `verificationKeys`) to be spoofed, since both functions return extracted data that may not match the data that was originally signed. Detached signature verifications are not affected, as no signed data is returned in that case. In order to spoof a message, the attacker needs a single valid message signature (inline or detached) as well as the plaintext data that was legitimately signed, and can then construct an inline-signed message or signed-and-encrypted message with any data of the attacker's choice, which will appear as legitimately signed by affected versions of OpenPGP.js. In other words, any inline-signed message can be modified to return any other data (while still indicating that the signature was valid), and the same is true for signed+encrypted messages if the attacker can obtain a valid signature and encrypt a new message (of the attacker's choice) together with that signature. The issue has been patched in versions 5.11.3 and 6.1.1. Some workarounds are available. When verifying inline-signed messages, extract the message and signature(s) from the message returned by `openpgp.readMessage`, and verify the(/each) signature as a detached signature by passing the signature and a new message containing only the data (created using `openpgp.createMessage`) to `openpgp.verify`. When decrypting and verifying signed+encrypted messages, decrypt and verify the message in two steps, by first calling `openpgp.decrypt` without `verificationKeys`, and then passing the returned signature(s) and a new message containing the decrypted data (created using `openpgp.createMessage`) to `openpgp.verify`. |
| Improper verification of cryptographic signature issue exists in "FreeFrom - the nostr client" App versions prior to 1.3.5 for Android and iOS. The affected app cannot detect event data with invalid signatures. |
| A certificate with a URI which has a IPv6 address with a zone ID may incorrectly satisfy a URI name constraint that applies to the certificate chain. Certificates containing URIs are not permitted in the web PKI, so this only affects users of private PKIs which make use of URIs. |
| Hyperbridge is a hyper-scalable coprocessor for verifiable, cross-chain interoperability. A critical vulnerability was discovered in the ismp-grandpa crate, that allowed a malicious prover easily convince the verifier of the finality of arbitrary headers. This could be used to steal funds or compromise other kinds of cross-chain applications. This vulnerability is fixed in 15.0.1. |
| Improper verification of cryptographic signature during installation of a Printer driver via the TeamViewer_service.exe component of TeamViewer Remote Clients prior version 15.58.4 for Windows allows an attacker with local unprivileged access on a Windows system to elevate their privileges and install drivers. |
| Quest KACE Systems Management Appliance (SMA) 13.0.x before 13.0.385, 13.1.x before 13.1.81, 13.2.x before 13.2.183, 14.0.x before 14.0.341 (Patch 5), and 14.1.x before 14.1.101 (Patch 4) allows unauthenticated users to upload backup files to the system. While signature validation is implemented, weaknesses in the validation process can be exploited to upload malicious backup content that could compromise system integrity. |
| ALTCHA is privacy-first software for captcha and bot protection. A cryptographic semantic binding flaw in ALTCHA libraries allows challenge payload splicing, which may enable replay attacks. The HMAC signature does not unambiguously bind challenge parameters to the nonce, allowing an attacker to reinterpret a valid proof-of-work submission with a modified expiration value. This may allow previously solved challenges to be reused beyond their intended lifetime, depending on server-side replay handling and deployment assumptions. The vulnerability primarily impacts abuse-prevention mechanisms such as rate limiting and bot mitigation. It does not directly affect data confidentiality or integrity. This issue has been addressed by enforcing explicit semantic separation between challenge parameters and the nonce during HMAC computation. Users are advised to upgrade to patched versions, which include version 1.0.0 of the altcha Golang package, version 1.0.0 of the altcha Rubygem, version 1.0.0 of the altcha pip package, version 1.0.0 of the altcha Erlang package, version 1.4.1 of the altcha-lib npm package, version 1.3.1 of the altcha-org/altcha Composer package, and version 1.3.0 of the org.altcha:altcha Maven package. As a mitigation, implementations may append a delimiter to the end of the `salt` value prior to HMAC computation (for example, `<salt>?expires=<time>&`). This prevents ambiguity between parameters and the nonce and is backward-compatible with existing implementations, as the delimiter is treated as a standard URL parameter separator. |
| An insufficiently secured internal function allows session generation for arbitrary users. The decodeParam function checks the JWT but does not verify which signing algorithm was used. As a result, an attacker can use the "ex:action" parameter in the VerifyUserByThrustedService function to generate a session for any user. |
| A vulnerability in the Image Signature Verification feature of Cisco SD-WAN Software could allow an authenticated, remote attacker with Administrator-level credentials to install a malicious software patch on an affected device.
The vulnerability is due to improper verification of digital signatures for patch images. An attacker could exploit this vulnerability by crafting an unsigned software patch to bypass signature checks and loading it on an affected device. A successful exploit could allow the attacker to boot a malicious software patch image.Cisco has released software updates that address the vulnerability described in this advisory. There are no workarounds that address this vulnerability. |
| Cryptographic validation of upgrade images could be circumventing by dropping a specifically crafted file into the upgrade ISO |
| CWE-347: Improper Verification of Cryptographic Signature vulnerability exists that could
compromise the Data Center Expert software when an upgrade bundle is manipulated to
include arbitrary bash scripts that are executed as root. |
| Laravel Reverb provides a real-time WebSocket communication backend for Laravel applications. Prior to 1.4.0, there is an issue where verification signatures for requests sent to Reverb's Pusher-compatible API were not being verified. This API is used in scenarios such as broadcasting a message from a backend service or for obtaining statistical information (such as number of connections) about a given channel. This issue only affects the Pusher-compatible API endpoints and not the WebSocket connections themselves. In order to exploit this vulnerability, the application ID which, should never be exposed, would need to be known by an attacker. This vulnerability is fixed in 1.4.0. |
