| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Node.js web service on VOS (previously Versa FlexVNF) is used for URL-based Zero Touch Provisioning (ZTP) of the VOS appliance and is not required after provisioning is complete. The /authenticate endpoint of this service passes user-supplied username and password values to child_process.exec() through a sanitizer (escapeRegExp) that removes regular expression metacharacters but not newline characters. An unauthenticated attacker can inject a newline character into the username field to execute arbitrary shell commands as the versa OS service user. No credentials are required; the attacker needs only a CSRF token, which can be obtained from an unauthenticated page load.
Versa’s security hardening guide for Hubs, Branches, and Controllers recommends disabling the Node.js web service after the initial provisioning of the VOS device. This vulnerability is not exploitable on VOS devices where the Node.js web service has been disabled. |
| pglogical's apply worker does not sufficiently validate the length of certain fields in incoming replication protocol messages before copying them, resulting in an out-of-bounds read. A party acting as the publisher for a subscription, for example a non-PostgreSQL endpoint that speaks the pglogical replication protocol, can return crafted messages that cause the subscriber's apply worker to read beyond the bounds of an allocated buffer, disclosing adjacent process memory or crashing the worker. To exploit the issue an attacker must be able to direct a subscription at an endpoint they control. In default installations this requires privileges normally reserved for a superuser, so the issue is most relevant to managed deployments where the ability to create subscriptions has been delegated to non-superuser roles. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: block: fix GenDisk cleanup paths
GenDiskBuilder::build() still has fallible work after
__blk_mq_alloc_disk(), but its error path only recovers the
foreign queue data. That leaks the temporary gendisk and
request_queue until later teardown. If the caller moved the last
Arc<TagSet<T>> into build(), the leaked queue can retain blk-mq
state after the tag set is dropped.
Fix the pre-registration failure path by dropping the temporary
gendisk reference with put_disk() before recovering queue_data,
so disk_release() can tear down the owned queue.
Also pair GenDisk::drop() with put_disk() after del_gendisk().
Once a Rust GenDisk has been added with device_add_disk(),
del_gendisk() only unregisters it; the final gendisk reference
still has to be dropped to complete the release path. |
| Path Traversal vulnerability exists in SS1/ SS1 Cloud provided by DOS Co., Ltd. and the ODM product rocoeyes provided by Rococo Co. Ltd. Arbitrary files may be deleted. |
| Insecure storage of sensitive information issue exists in SS1 provided by DOS Co., Ltd. Sensitive information used by the product may be obtained. |
| KUSANAGI provided by GMO Prime Strategy Co., Ltd. contains an HTTP header injection vulnerability that may allow arbitrary HTTP headers to be injected into the HTTP response when a user accesses a specially crafted URL. |
| Effekseer improperly validates "effect" files. When a crafted effect file is loaded to the affected runtime, the host process may be forced to crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: NFIT: core: Fix possible NULL pointer dereference
After commit 9b311b7313d6 ("ACPI: NFIT: Install Notify() handler before
getting NFIT table"), acpi_nfit_probe() installs an ACPI notify handler
for the NFIT device before checking the presence of the NFIT table. If
that table is not there, 0 is returned without allocating the acpi_desc
object and setting the driver data pointer of the NFIT device. If the
platform firmware triggers an NFIT_NOTIFY_UC_MEMORY_ERROR notification
on the NFIT device at that point, acpi_nfit_uc_error_notify() will
dereference a NULL pointer.
Prevent that from occurring by adding an acpi_desc check against NULL
to acpi_nfit_uc_error_notify(). |
| Insertion of Sensitive Information Into Sent Data vulnerability in IdeaBox Creations PowerPack Addons for Elementor powerpack-lite-for-elementor allows Retrieve Embedded Sensitive Data.This issue affects PowerPack Addons for Elementor: from n/a through 3.1.3. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: fix hdrlen overflow in ipv6_rpl_srh_decompress()
ipv6_rpl_srh_decompress() computes:
outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3);
hdrlen is __u8. For n >= 127 the result exceeds 255 and silently
truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16):
(128 * 16) >> 3 = 256, truncated to 0 as __u8
The caller in ipv6_rpl_srh_rcv() then places the compressed header
at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8,
but the decompressed region occupies buf[0..2055] (8-byte header
plus 128 full addresses). The compressed header overlaps the
decompressed data, and ipv6_rpl_srh_compress() writes into this
overlap, corrupting the routing header of the forwarded packet.
The existing guard at exthdrs.c:546 checks (n + 1) > 255, which
prevents n+1 from overflowing unsigned char (the segments_left
field), but does not prevent the computed hdrlen from overflowing
__u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not
fit.
Tighten the bound to (n + 1) > 127. This caps n at 126, giving
hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed
header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly
past the decompressed region (buf[0..2039]). No overlap. 127
segments is well beyond any realistic RPL deployment. |
| The NotificationX WordPress plugin before 3.3.7 does not perform any capability, authentication or nonce check on its notification preview path, allowing unauthenticated users to disclose the content of private, draft, pending and password-protected posts and to execute arbitrary registered shortcodes by supplying crafted preview data on any front-end request. |
| The Live Composer WordPress plugin before 2.1.24 does not sanitise and escape some of its page-builder module settings before outputting them, allowing users with access to the builder (Administrator by default) to inject arbitrary JavaScript that executes when the affected page is viewed by any visitor; this has impact even on administrators where the unfiltered_html capability is disallowed, e.g. in multisite setups. |
| The NotificationX WordPress plugin before 3.3.7 does not perform any capability or nonce check on one of its REST routes, allowing unauthenticated users to update a NotificationX WordPress plugin before 3.3.7 option and to repeatedly trigger emails sent through the site's own mail server. |
| The Schema & Structured Data for WP & AMP WordPress plugin before 1.70 does not verify that a user may edit a post before letting them change that post's structured data settings, allowing users with the Contributor role and above, when an administrator has granted them access to the Schema & Structured Data for WP & AMP WordPress plugin before 1.70, to disable, alter or reset the structured data of posts they do not own. |
| The Printaura-Woocommerce WordPress plugin through 4.0.2 does not properly restrict access to the WooCommerce REST API, causing every WooCommerce REST route to accept unauthenticated requests, which allows unauthenticated attackers to read and modify store data including customer orders and personal information, store and payment settings, and webhooks. |
| The Data Tables Generator by Supsystic WordPress plugin before 1.15.8 does not perform any authorization or ownership check before returning the stored contents of a table, relying only on a nonce that is exposed to every anonymous visitor, allowing unauthenticated users to read the full contents of any table by its identifier, including tables that are never published anywhere on the site. |
| The Elementor Website Builder WordPress plugin before 4.3.6 does not validate or escape an element identifier before rendering it into a client-side framework attribute that is evaluated as JavaScript, allowing users with the Contributor role to store scripts that execute in the browser of anyone viewing the affected content, including an administrator reviewing the submission for publication. |
| The Forminator Forms WordPress plugin before 1.58.4 does not verify that a Stripe Checkout payment has completed before returning a pending submission's after-payment response, allowing unauthenticated visitors to obtain the post-payment redirect URL and thank-you message of a payment-gated form without paying. |
| The Contest Gallery WordPress plugin before 34.0.3 does not sanitise the name of files uploaded through its e-commerce sale file-replacement feature, allowing authenticated users with Author-level access and above to write files with an arbitrary name and extension to a web-accessible directory and, by overwriting the directory's protection file through the same flow, achieve Remote Code Execution. |
| The Photo Engine (Media Organizer & Lightroom) WordPress plugin before 6.6.2 does not check that a user may delete the media in a collection before deleting it along with the collection, allowing users with the Author role and above to permanently delete other users' synced media, including administrators'. |