| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use-after-free in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 148 and Thunderbird 148. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid UAF in f2fs_write_end_io()
As syzbot reported an use-after-free issue in f2fs_write_end_io().
It is caused by below race condition:
loop device umount
- worker_thread
- loop_process_work
- do_req_filebacked
- lo_rw_aio
- lo_rw_aio_complete
- blk_mq_end_request
- blk_update_request
- f2fs_write_end_io
- dec_page_count
- folio_end_writeback
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: free(sbi)
: get_pages(, F2FS_WB_CP_DATA)
accessed sbi which is freed
In kill_f2fs_super(), we will drop all page caches of f2fs inodes before
call free(sbi), it guarantee that all folios should end its writeback, so
it should be safe to access sbi before last folio_end_writeback().
Let's relocate ckpt thread wakeup flow before folio_end_writeback() to
resolve this issue. |
| Memory safety bugs present in Firefox 148.0.2. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 148.0.2. |
| An attacker might be able to trigger a use-after-free by sending crafted DNS queries to a DNSdist using the DNSQuestion:getEDNSOptions method in custom Lua code. In some cases DNSQuestion:getEDNSOptions might refer to a version of the DNS packet that has been modified, thus triggering a use-after-free and potentially a crash resulting in denial of service. |
| The application does not properly validate the lifetime and validity of internal view cache pointers after JavaScript changes the document zoom and page state. When a script modifies the zoom property and then triggers a page change, the original view object may be destroyed while stale pointers are still kept and later dereferenced, which under crafted JavaScript and document structures can lead to a use-after-free condition and potentially allow arbitrary code execution. |
| Use after free in Navigation in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| HDF5 is software for managing data. In 1.14.1-2 and earlier, a heap-use-after-free was found in the h5dump helper utility. An attacker who can supply a malicious h5 file can trigger a heap use-after-free. The freed object is referenced in a memmove call from H5T__conv_struct. The original object was allocated by H5D__typeinfo_init_phase3 and freed by H5D__typeinfo_term. |
| Wasmtime is a runtime for WebAssembly. In 43.0.0, cloning a wasmtime::Linker is unsound and can result in use-after-free bugs. This bug is not controllable by guest Wasm programs. It can only be triggered by a specific sequence of embedder API calls made by the host. Specifically, the following steps must occur to trigger the bug clone a wasmtime::Linker, drop the original linker instance, use the new, cloned linker instance, resulting in a use-after-free. This vulnerability is fixed in 43.0.1. |
| A Use After Free vulnerability affecting the PAR file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025 could allow an attacker to execute arbitrary code while opening a specially crafted PAR file. |
| Software installed and run as a non-privileged user may conduct GPU system calls to read and write freed physical memory from the GPU. |
| It is possible to cause an use-after-free write in SANM decoding with a carefully crafted animation using subversion <2.
When a STOR chunk is present, a subsequent FOBJ chunk will be saved in ctx->stored_frame. Stored frames can later be referenced by FTCH chunks. For files using subversion < 2, the undecoded frame is stored, and decoded again when the FTCH chunks are parsed. However, in process_frame_obj if the frame has an invalid size, there’s an early return, with a value of 0.
This causes the code in decode_frame to still store the raw frame buffer into ctx->stored_frame. Leaving ctx->has_dimensions set to false.
A subsequent chunk with type FTCH would call process_ftch and decode that frame obj again, adding to the top/left values and calling process_frame_obj again.
Given that we never set ctx->have_dimensions before, this time we set the dimensions, calling init_buffers, which can reallocate the buffer in ctx->stored_frame, freeing the previous one. However, the GetByteContext object gb still holds a reference to the old buffer.
Finally, when the code tries to decode the frame, codecs that accept a GetByteContext as a parameter will trigger a use-after-free read when using gb.
GetByteContext is only used for reading bytes, so at most one could read invalid data. There are no heap allocations between the free and when the object is accessed. However, upon returning to process_ftch, the code restores the original values for top/left in stored_frame, writing 4 bytes to the freed data at offset 6, potentially corrupting the allocator’s metadata.
This issue can be triggered just by probing whether a file has the sanm format.
We recommend upgrading to version 8.0 or beyond. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
During the detaching of Marvell's SAS/SATA controller, the original code
calls cancel_delayed_work() in mvs_free() to cancel the delayed work
item mwq->work_q. However, if mwq->work_q is already running, the
cancel_delayed_work() may fail to cancel it. This can lead to
use-after-free scenarios where mvs_free() frees the mvs_info while
mvs_work_queue() is still executing and attempts to access the
already-freed mvs_info.
A typical race condition is illustrated below:
CPU 0 (remove) | CPU 1 (delayed work callback)
mvs_pci_remove() |
mvs_free() | mvs_work_queue()
cancel_delayed_work() |
kfree(mvi) |
| mvi-> // UAF
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled and any executing
delayed work item completes before the mvs_info is deallocated.
This bug was found by static analysis. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. |
| A vulnerability was determined in appneta tcpreplay up to 4.5.2-beta2. The impacted element is the function untrunc_packet of the file src/tcpedit/edit_packet.c of the component tcprewrite. Executing manipulation can lead to use after free. It is possible to launch the attack on the local host. The exploit has been publicly disclosed and may be utilized. This patch is called 73008f261f1cdf7a1087dc8759115242696d35da. Applying a patch is advised to resolve this issue. |
| Use After Free vulnerability exists in the CATPRODUCT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted CATPRODUCT file. |
| NVIDIA GPU Display Driver for Windows contains a vulnerability where an attacker with local unprivileged access that can win a race condition might be able to trigger a use-after-free error. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, or information disclosure. |
| @fastly/js-compute is a JavaScript SDK and runtime for building Fastly Compute applications. The implementation of several functions were determined to include a use-after-free bug. This bug could allow for unintended data loss if the result of the preceding functions were sent anywhere else, and often results in a guest trap causing services to return a 500. This bug has been fixed in version 3.16.0 of the `@fastly/js-compute` package. |
| Heap-based Buffer Overflow, Memory Corruption, Out-Of-Bounds Read, Out-Of-Bounds Write, Stack-based Buffer Overflow, Type Confusion, Uninitialized Variable, Use-After-Free vulnerabilities exist in the file reading procedure in SOLIDWORKS Desktop on Release SOLIDWORKS 2024.
These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted CATPART, DWG, DXF, IPT, JT, SAT, SLDDRW, SLDPRT, STL, STP, X_B or X_T file. |
| An unauthenticated local attacker may trick a user to open corrupted project files to crash the system due to use after free vulnerability. |
| A vulnerability was determined in axboe fio up to 3.41. This impacts the function __parse_jobs_ini of the file init.c. Executing manipulation can lead to use after free. The attack needs to be launched locally. The exploit has been publicly disclosed and may be utilized. |
