| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Inefficient algorithmic complexity in the JSON reader of Progressive Robot hMailServer 6.3.6 and 6.3.7 allows a remote attacker to hold the server's mail delivery threads or its REST API's worker threads, making mail delivery, the REST API and the webmail unavailable. 6.3.6 fixed CVE-2026-107574, in which reading a JSON object searched the member names already read for each new name, by keeping the names in a hash set; the set uses the standard library's hash, which takes no secret, so member names chosen to fall in one bucket of it still cost time growing with the square of their number. Against the released reader, one such object of 16 MB took about 5 seconds to read in the Linux build, and one of under 6 MB about 23 seconds in the Windows build, where objects of the same sizes with other names took under a tenth of a second. A remote unauthenticated attacker reaches the reader by mailing such an object as a TLS-RPT report, up to 16 MB once decompressed, to a hosted domain's report mailbox, where an administrator has set one; it is read on a mail delivery thread (ten by default), and those threads deliver all mail, local and outbound, so a stream of such reports stops all delivery for as long as it continues. It is also reached without an account through the reply to a password-protected message, with the message's link alone, where the REST API is on (it is off by default) and a public base URL for such links is set; and by any account through the webmail's routes granted 16 MB, and by an application's API key through the send API. Each such request holds one of the REST API's four worker threads, in the process that also serves SMTP, IMAP and POP3. |
| Incorrect default permissions in the Windows installer of Progressive Robot hMailServer 6.3.7 allow a local authenticated user to run code as the administrator who runs setup, when the server is installed into a program folder that is already there and that accounts other than the administrators could write, such as a folder made beforehand at the root of a drive, or when such an installation is upgraded or repaired. 6.3.7 fixed CVE-2026-107571 by giving the program folder, Bin and ControlPanel permissions that only administrators may change, but for a folder that is already there it does so only at the end of setup: setup first copies the programs into Bin, which every user may still write, and runs programs from Bin with the administrator's elevated rights, registering the service among them, before that hardening, so that a library another account places in Bin meanwhile is loaded in place of the system's. A handle an account opened on such a folder while it could write it keeps that access after the hardening. The default installation under Program Files, whose folders give ordinary users read and execute only, is not affected. |
| Allocation of resources without limits in the JSON reader of Progressive Robot hMailServer 6.3.2 through 6.3.7 allows a remote attacker to exhaust the server's memory and hold its threads, making mail delivery, the REST API and the webmail unavailable. The reader built a tree of values far larger than the text it read, copying each value into every level above it, and set no bound on the number of values, so a single JSON document of many small values, within the 16 MB the server reads, raised the service's memory by about 2 GB and held one thread for seconds to minutes. From 6.3.4 a remote unauthenticated attacker reaches the reader by mailing such a document as a TLS-RPT report, up to 16 MB once decompressed, to a hosted domain's report mailbox, where an administrator has set one; it is read on a mail delivery thread (ten by default), and those threads deliver all mail, local and outbound. From 6.3.4 it is also reached without an account through the reply to a password-protected message, with the message's link alone, where the REST API is on (it is off by default) and a public base URL for such links is set; and by any account, from 6.3.2 through the webmail's send and draft routes and from 6.3.4 through its other routes granted 16 MB and the send API; the webmail's send, draft and settings routes parsed the body again for each member read. The REST API serves every request on four worker threads, in the process that also serves SMTP, IMAP and POP3, so a few such documents at once make it unavailable and can exhaust the machine's memory and end the whole service. This is a separate defect from CVE-2026-107574, the reader's handling of duplicate member names, fixed in 6.3.6. |
| Improper link resolution in the Windows installer of Progressive Robot hMailServer 6.0.0 through 6.3.7 allows a local authenticated user to run code as the mail server's service account or as an administrator when the path to the program folder passes through a junction, a symbolic link or a mount point that the user controls or that every user may change, such as a junction made at the root of a drive, which takes the root's permissions, or through a folder that every user may rename. Setup installed the programs through any such link without first checking who controls it, or whether a folder above the program folder may be renamed, and the service is registered to run the programs by that path, so the programs are installed where a link another account controls leads, or that account can later make the path lead to a folder it controls; the service, which runs as LocalSystem or as its virtual account, and the programs administrators run from Bin are then started from there. 6.3.7's fix for CVE-2026-107571 does not cover this: its hardening of the program folder, Bin and ControlPanel does not change a folder reached through a link that the administrators do not alone control, and setup does not refuse such a path: it installs through the link and at most reports afterwards that the folders could not be hardened. The default installation under Program Files is not affected. |
| Progressive Robot hMailServer 6.3.4 through 6.3.7, with a MySQL or MariaDB database and TlsMode=verify-full, does not hand the database client the CA file that TlsCaFile names when the file's name contains a character outside ASCII on Linux, or above U+00FF on Windows, which allows an attacker who can intercept the connection to the database server to read and modify the traffic between hMailServer and its database, by presenting, with MariaDB Connector/C 3.4.2 to 3.4.10 as the client, a certificate from any authority, its own included, for any name, and otherwise a certificate for the database server's name issued by any certificate authority in the system's trust store. The server converted the name for the client with the C runtime's conversion in the C locale, which gives an empty string for such a name, and then set no CA file at all, without an error, while certificate verification stayed on, so the client - MariaDB Connector/C, bundled on Windows and the distribution's on Linux - verified the certificate of a database server over the network against the system's trust store instead of the configured CA; Connector/C 3.4.2 to 3.4.10 (bundled on Windows in 6.3.4 to 6.3.6) went further and, with no CA file, took a certificate within its dates whose issuer it could not find, for any name, with neither its chain nor its name checked and no password proof, when the server offered first a sign-in method that hashes the password, which an attacker in the middle chooses (MariaDB's CONC-853, fixed in Connector/C 3.4.11), and Connector/C 3.4 accepted from a MariaDB 11.4 or later server a certificate the store did not vouch for when that server proved it held the account's password; on a connection it treats as local (127.0.0.1, ::1, a Unix socket, a named pipe, and localhost on Windows), Connector/C 3.4.1 and later checked neither the certificate's issuer nor its name, so that a local attacker able to stand in for the database server could present any certificate within its dates of its own making. The settings line of hmailserver --check-database still named the configured file, and the application log said the certificate had been checked. With MariaDB Connector/C 3.4.1 to 3.4.9 as the client - bundled on Windows in 6.3.4 to 6.3.6, and the client of Linux distributions that have not patched it - the missing CA file also met the precondition of CVE-2026-107819, so that a certificate issued for any other name by a trusted authority was enough to obtain the database password. On Linux the file was found only when the server ran on glibc under a locale whose character set holds the name's characters (a UTF-8 locale, or a legacy 8-bit one the system has, in whose bytes the file is then named); with no locale, LC_ALL=C or a locale the system lacks, and on Alpine (musl), the connection failed instead. The configuration is not the default: TlsMode defaults to prefer, which checks no certificate. |
| Progressive Robot hMailServer 6.3.4 through 6.3.7, with a MySQL or MariaDB database, TlsMode=verify-full and no TlsCaFile, does not verify the database server's certificate's issuer or name when the connection is one that MariaDB Connector/C treats as local - Server= set to 127.0.0.1, ::1 or localhost (on Linux a Unix socket), to . on Windows (a named pipe), or to a comma-separated list of servers that holds such an element - which allows a local attacker who can stand in for the database server, for example by listening on its port while it is stopped or restarting, to receive the database sign-in, the password included, and to read and modify the traffic between hMailServer and its database. hMailServer applied verify-full by turning the client's certificate verification on without a CA file, but MariaDB Connector/C 3.4.1 and later, on a connection they treat as local and with no CA file, accept any certificate within its validity period that is self-signed or sent with its own root, for any name (Connector/C 3.4.2 to 3.4.10 also one whose issuer they cannot find), so the client accepted the certificate an impostor made, asked no proof of the password and allowed a switch to an authentication method that sends the password unhashed, while hmailserver --check-database said the certificate had been checked against the system's trust store and the application log that it had been checked. The Windows builds bundle Connector/C 3.4.9 (6.3.4 to 6.3.6) and 3.4.11 (6.3.7); on Linux the distribution's client is used, and Connector/C 3.3 and 3.4.0 and Oracle's MySQL client are not affected. The configuration is not the default: TlsMode defaults to prefer, which checks no certificate. |
| Progressive Robot hMailServer 6.2.3 through 6.3.7 on Windows, with a MySQL or MariaDB database, hands the bundled MariaDB Connector/C the folder of its authentication plugins (the plugin folder in the installation's Bin folder) as Latin-1 bytes, which the client reads in the system's ANSI code page when it builds a plugin's path and loads the plugin with LoadLibraryExA, which allows a local authenticated user to execute code as the hMailServer service's account (LocalSystem, or the service's virtual account for a new installation from 6.3.4) by creating the folder those bytes name in the code page and placing in it a DLL with a plugin's name, when the installation folder's path holds a character between U+0080 and U+00FF whose byte the code page reads as another character, and none above U+00FF, and the user can create that other folder (by default any authenticated user may create a folder directly under the root of the system drive). The server converted the path with the C runtime's wcstombs_s in the C locale, which writes each character up to U+00FF as the byte of the same value: on code page 1252 those bytes are the same letters, while on another code page, such as 1251, or on a UTF-8 code page, they name another folder. The client loads the plugin the database server names in its greeting, unless it is built in, and any plugin the server names in an authentication switch, and tries again at each connection while a load fails, so with a MySQL 8.0 or later server, whose greeting names caching_sha2_password by default, the DLL is loaded at the next connection the service makes, whatever plugin the database account uses; a DLL's entry point runs when it is loaded. A path holding any character above U+00FF was handed over as an empty string, whatever the code page, from which the client makes a plugin's name at the root of the current drive: for the service, whose current folder is System32, that is the root of the system drive, where by default only administrators can create a file, but the server's own database commands (hMailServer.exe --check-database, --upgrade-database and the others from 6.3.4, and the /Debug and /Test console modes from 6.2.3) run in the folder they are started from - the product tells administrators to run them from an elevated prompt in the Bin folder, and the setup of 6.3.4 and 6.3.5 ran two or three of them itself with the Bin folder as their working folder for a new installation with an external database - so a DLL that a local authenticated user placed under a plugin's name at the root of a drive other users may write, such as a FAT or exFAT volume, was loaded into the administrator's process at the command's first connection to a MySQL 8.0 or later server. 6.3.8 fixes both cases: it hands the folder in the code page's bytes or by its short (8.3) name, and where neither can be written, a folder under the Windows system folder that holds no plugin and that only administrators can create, or else refuses the connection before attempting it; it never hands the empty value or a folder the current drive completes. The configuration is not the default: the default installation folder, under Program Files, is ASCII. Linux builds set no plugin folder and are not affected. |
| Progressive Robot hMailServer 6.2.25 through 6.3.7 on Windows, with a PostgreSQL database, the connection's sslmode require, verify-ca or verify-full, and a root certificate file named by PostgreSQLSslRootCert (from 6.2.25) or, with TlsMode=verify-full and neither PostgreSQL key set, by TlsCaFile (from 6.3.4), hands the file's name to libpq as bytes in the system's ANSI code page (up to 6.3.5 as Latin-1 bytes, which on code page 1252 are the code page's own for U+00A0 to U+00FF), and libpq looks for the file by those bytes and then hands the same bytes to OpenSSL, whose file opening on Windows reads a name as UTF-8 first and opens the file at that reading when one is there. When every byte of the name outside ASCII also reads as UTF-8 - for example U+00C3 U+00A9, the bytes C3 A9 on code page 1252, which are U+00E9 in UTF-8 - the database server's certificate was checked against the file at that other name whenever one was there, which allows a local attacker who can create that file but cannot change the configured one, as any user can by default beside a file an administrator keeps under ProgramData, or beside a folder directly under the system drive's root whose permissions the administrator restricted, and who can intercept the connection to the database server or stand in for it, to have hMailServer trust a certificate authority of the attacker's own and read and modify the traffic between hMailServer and its database, the database password included; the file alone, holding no authority that issued the database server's certificate, stops hMailServer from connecting to its database. The same applies in 6.3.4 through 6.3.7 to TlsCaFile when an Oracle MySQL client library has been put in place of the bundled MariaDB Connector/C, since that client opens the file through OpenSSL in the same way; the bundled MariaDB Connector/C opens the file in the code page and is not affected, and neither are the Linux builds. The configuration is not the default: by default no root certificate file is named. |
| A local low privileged attacker can move arbitrary physical memory content via TcRouter.sys because of exposed IOCTL function calls resulting in a full compromise of the affected devices. |
| A local low privileged attacker can access arbitrary physical memory or define its mapping via TcRouter.sys because of exposed IOCTL function calls resulting in a full compromise of the affected devices. |
| A local low privileged attacker or process can access I/O ports via TcRouter.sys because of exposed IOCTL function calls resulting in a full compromise of the affected devices. |
| Zoho Corporation ManageEngine EventLog Analyzer and Log360 versions below 13071 are vulnerable to a denial-of-service (DoS) vulnerability in the log collector component. |
| A flaw was found in the group-move and organization group reparenting endpoints of the keycloak-services component. This component is responsible for core authentication and authorization services in the Red Hat build of Keycloak. The issue occurs because the system fails to check if a target parent group confers administrative roles when a group is moved. A delegated administrator can exploit this to move a group they control under an administrative group, causing all members to inherit full realm-admin privileges and gain complete control over the realm. |
| HCL Domino Leap is vulnerable to Stored XSS through malicious application titles in Manage page dialogs, allowing an attacker to take over a user's session |
| HCL Leap is vulnerable to Stored XSS through malicious application titles in the Manage page dialogs, allowing an attacker to take over a user's session |
| Zoho Corporation ManageEngine ADAudit Plus versions below 8703 are vulnerable to an authenticated SQL injection vulnerability in ADAudit Plus Reports API. |
| A flaw was found in Podman. An attacker can trigger a Denial of Service (DoS) by supplying a container image containing crafted metadata labels. Podman's auto-update mechanism improperly trusts these image labels to determine which system services to restart. If a user runs the malicious container and auto-update processes it, arbitrary system services are restarted with the user's privileges, potentially allowing an attacker to shut down the host system when Podman runs with administrative privileges. |
| Zoho Corporation ManageEngine ADAudit Plus versions below 8711 are vulnerable to an authenticated second order SQL injection vulnerability affecting ADAudit Plus custom reports module. |
| In affected versions of Octopus Server, incorrect validation of permissions assigned to a user that would allow them to edit their own login identities could result in that user being granted elevated permissions, up to and including system administrator access. This issue affects instances using LDAP authentication with self-service login editing enabled. |
| The ARForms plugin for WordPress is vulnerable to arbitrary file upload in all versions up to, and including, 7.2.4 via its form file-upload handler. The name of the stored file is taken from an attacker-controlled request header and is not adequately restricted to safe file types, and the plugin's file-type and content-safety checks can be evaded, allowing files that contain executable PHP code to be written to a publicly accessible directory. This makes it possible for unauthenticated attackers to upload malicious files to the affected site's server, which may make remote code execution possible. Exploitation requires a published form containing a File field to be publicly accessible on the site. |
