| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| phpCAS is an authentication library that allows PHP applications to easily authenticate users via a Central Authentication Service (CAS) server. The phpCAS library uses HTTP headers to determine the service URL used to validate tickets. This allows an attacker to control the host header and use a valid ticket granted for any authorized service in the same SSO realm (CAS server) to authenticate to the service protected by phpCAS. Depending on the settings of the CAS server service registry in worst case this may be any other service URL (if the allowed URLs are configured to "^(https)://.*") or may be strictly limited to known and authorized services in the same SSO federation if proper URL service validation is applied. This vulnerability may allow an attacker to gain access to a victim's account on a vulnerable CASified service without victim's knowledge, when the victim visits attacker's website while being logged in to the same CAS server. phpCAS 1.6.0 is a major version upgrade that starts enforcing service URL discovery validation, because there is unfortunately no 100% safe default config to use in PHP. Starting this version, it is required to pass in an additional service base URL argument when constructing the client class. For more information, please refer to the upgrading doc. This vulnerability only impacts the CAS client that the phpCAS library protects against. The problematic service URL discovery behavior in phpCAS < 1.6.0 will only be disabled, and thus you are not impacted from it, if the phpCAS configuration has the following setup: 1. `phpCAS::setUrl()` is called (a reminder that you have to pass in the full URL of the current page, rather than your service base URL), and 2. `phpCAS::setCallbackURL()` is called, only when the proxy mode is enabled. 3. If your PHP's HTTP header input `X-Forwarded-Host`, `X-Forwarded-Server`, `Host`, `X-Forwarded-Proto`, `X-Forwarded-Protocol` is sanitized before reaching PHP (by a reverse proxy, for example), you will not be impacted by this vulnerability either. If your CAS server service registry is configured to only allow known and trusted service URLs the severity of the vulnerability is reduced substantially in its severity since an attacker must be in control of another authorized service. Otherwise, you should upgrade the library to get the safe service discovery behavior. |
| FreeRDP is a free remote desktop protocol library and clients. Affected versions of FreeRDP are missing a range check for input offset index in ZGFX decoder. A malicious server can trick a FreeRDP based client to read out of bound data and try to decode it. This issue has been addressed in version 2.9.0. There are no known workarounds for this issue. |
| Redis is an in-memory database that persists on disk. Versions 7.0.0 and above, prior to 7.0.5 are vulnerable to an Integer Overflow. Executing an `XAUTOCLAIM` command on a stream key in a specific state, with a specially crafted `COUNT` argument may cause an integer overflow, a subsequent heap overflow, and potentially lead to remote code execution. This has been patched in Redis version 7.0.5. No known workarounds exist. |
| Composer is a dependency manager for the PHP programming language. Integrators using Composer code to call `VcsDriver::getFileContent` can have a code injection vulnerability if the user can control the `$file` or `$identifier` argument. This leads to a vulnerability on packagist.org for example where the composer.json's `readme` field can be used as a vector for injecting parameters into hg/Mercurial via the `$file` argument, or git via the `$identifier` argument if you allow arbitrary data there (Packagist does not, but maybe other integrators do). Composer itself should not be affected by the vulnerability as it does not call `getFileContent` with arbitrary data into `$file`/`$identifier`. To the best of our knowledge this was not abused, and the vulnerability has been patched on packagist.org and Private Packagist within a day of the vulnerability report. |
| CKEditor4 is an open source what-you-see-is-what-you-get HTML editor. CKEditor4 prior to version 4.18.0 contains a vulnerability in the `dialog` plugin. The vulnerability allows abuse of a dialog input validator regular expression, which can cause a significant performance drop resulting in a browser tab freeze. A patch is available in version 4.18.0. There are currently no known workarounds. |
| Puma is a Ruby/Rack web server built for parallelism. Prior to `puma` version `5.6.2`, `puma` may not always call `close` on the response body. Rails, prior to version `7.0.2.2`, depended on the response body being closed in order for its `CurrentAttributes` implementation to work correctly. The combination of these two behaviors (Puma not closing the body + Rails' Executor implementation) causes information leakage. This problem is fixed in Puma versions 5.6.2 and 4.3.11. This problem is fixed in Rails versions 7.02.2, 6.1.4.6, 6.0.4.6, and 5.2.6.2. Upgrading to a patched Rails _or_ Puma version fixes the vulnerability. |
| Marked is a markdown parser and compiler. Prior to version 4.0.10, the regular expression `inline.reflinkSearch` may cause catastrophic backtracking against some strings and lead to a denial of service (DoS). Anyone who runs untrusted markdown through a vulnerable version of marked and does not use a worker with a time limit may be affected. This issue is patched in version 4.0.10. As a workaround, avoid running untrusted markdown through marked or run marked on a worker thread and set a reasonable time limit to prevent draining resources. |
| Marked is a markdown parser and compiler. Prior to version 4.0.10, the regular expression `block.def` may cause catastrophic backtracking against some strings and lead to a regular expression denial of service (ReDoS). Anyone who runs untrusted markdown through a vulnerable version of marked and does not use a worker with a time limit may be affected. This issue is patched in version 4.0.10. As a workaround, avoid running untrusted markdown through marked or run marked on a worker thread and set a reasonable time limit to prevent draining resources. |
| An information disclosure vulnerability exists in the pick-and-place rotation parsing functionality of Gerbv 2.7.0 and dev (commit b5f1eacd), and Gerbv forked 2.8.0. A specially-crafted pick-and-place file can exploit the missing initialization of a structure to leak memory contents. An attacker can provide a malicious file to trigger this vulnerability. |
| A use-after-free vulnerability exists in the RS-274X aperture definition tokenization functionality of Gerbv 2.7.0 and dev (commit b5f1eacd) and Gerbv forked 2.7.1. A specially-crafted gerber file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability. |
| An issue was discovered in the Linux kernel through 5.10.11. PI futexes have a kernel stack use-after-free during fault handling, allowing local users to execute code in the kernel, aka CID-34b1a1ce1458. |
| Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: DDL). Supported versions that are affected are 8.0.25 and prior. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H). |
| ASP.NET Core and Visual Studio Denial of Service Vulnerability |
| Heap-based buffer overflow in ARM mbed TLS (formerly PolarSSL) 1.3.x before 1.3.14 and 2.x before 2.1.2 allows remote SSL servers to cause a denial of service (client crash) and possibly execute arbitrary code via a long session ticket name to the session ticket extension, which is not properly handled when creating a ClientHello message to resume a session. NOTE: this identifier was SPLIT from CVE-2015-5291 per ADT3 due to different affected version ranges. |
| Mbed TLS 2.x before 2.28.5 and 3.x before 3.5.0 has a Buffer Overflow. |
| Arm Mbed TLS before 2.19.0 and Arm Mbed Crypto before 2.0.0, when deterministic ECDSA is enabled, use an RNG with insufficient entropy for blinding, which might allow an attacker to recover a private key via side-channel attacks if a victim signs the same message many times. (For Mbed TLS, the fix is also available in versions 2.7.12 and 2.16.3.) |
| An issue was discovered in Arm Mbed TLS before 2.16.6 and 2.7.x before 2.7.15. An attacker that can get precise enough side-channel measurements can recover the long-term ECDSA private key by (1) reconstructing the projective coordinate of the result of scalar multiplication by exploiting side channels in the conversion to affine coordinates; (2) using an attack described by Naccache, Smart, and Stern in 2003 to recover a few bits of the ephemeral scalar from those projective coordinates via several measurements; and (3) using a lattice attack to get from there to the long-term ECDSA private key used for the signatures. Typically an attacker would have sufficient access when attacking an SGX enclave and controlling the untrusted OS. |
| An issue was discovered in Mbed TLS 2.18.0 through 2.28.x before 2.28.8 and 3.x before 3.6.0, and Mbed Crypto. The PSA Crypto API mishandles shared memory. |
| An issue was discovered in Mbed TLS before 2.28.2 and 3.x before 3.3.0. An adversary with access to precise enough information about memory accesses (typically, an untrusted operating system attacking a secure enclave) can recover an RSA private key after observing the victim performing a single private-key operation, if the window size (MBEDTLS_MPI_WINDOW_SIZE) used for the exponentiation is 3 or smaller. |
| In Mbed TLS before 2.28.0 and 3.x before 3.1.0, psa_cipher_generate_iv and psa_cipher_encrypt allow policy bypass or oracle-based decryption when the output buffer is at memory locations accessible to an untrusted application. |
