| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in olm-operator-konflux-sample. The hermetic build mode is disabled by default, allowing bundle builds to perform live network fetches. This means that external, unverified resources can be pulled during the build process, potentially compromising the integrity and trustworthiness of the resulting software artifacts. This introduces a supply chain risk where the final product might contain unintended or malicious code. |
| Ivanti Connect Secure 22.8R2.4 mishandles the manner in which the dsinvoked broker trusts DSCache configuration data, leading to privilege escalation to root, as exploited in the wild in October 2026. |
| CloudPirates Open Source Helm Charts is a collection of Helm charts. Prior to commit 271d415, pull_request_target workflow is vulnerable to cache poisoning and OIDC token theft. A pull_request_target workflow checks out fork code using github.event.pull_request.head.sha or .head.ref. This gives attacker-controlled code access to base repository secrets and tokens. A pull_request_target workflow writes to a shared Actions cache. A subsequent release or publish workflow restores from the same cache scope, allowing a poisoned cache entry to execute during release. This issue has been patched via commit 271d415. |
| SQLite before 3.54.0 contains a use-after-free vulnerability in the R-Tree extension that allows attackers to make applications use freed heap memory by manipulating the %_node shadow table. Attackers can supply a database declaring %_node WITHOUT ROWID or with a RAISE(IGNORE) trigger so nodeWrite() hashes nodes as 0, crashing the process after node splits. |
| odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. Prior to version 25.12, odhcpd's DHCPv6 IA handler keeps a per-message `first` lease pointer so multiple IA options in one message reuse the same Reconfigure authentication key. A DHCPv6 REQUEST from an adjacent-network client can make the first IA set `first`, then make a later same-IAID IA fail the on-link check and free that same lease, leaving `first` dangling. A following IA in the same packet allocates a new lease and copies `first->key`, producing a 16-byte heap-use-after-free read. ASan confirms the UAF; native tracing shows the packet shape can deterministically reclaim the freed lease as the destination allocation, producing a zeroed Reconfigure key copy. The validated impact is unauthenticated adjacent-network denial of service and DHCPv6 Reconfigure/ForceRenew key confusion. Arbitrary PC control is not proven for this UAF alone. This issue has been patched in version 25.12. |
| An invalid pointer dereference vulnerability exists in the vtkPNGReader::vtkPNGReaderUpdate2 functionality of vtk 9.6. A specially crafted .png file can lead to a denial of service. An attacker can provide a malicious file to trigger this vulnerability. |
| An invalid pointer dereference vulnerability exists in the vtkPNGReader::ExecuteInformation functionality of vtk 9.6. A specially crafted .png file can lead to a denial of service. An attacker can provide a malicious file to trigger this vulnerability. |
| The PEAK-System PCAN type 0x4030 processing path fails to validate a selected/returned object pointer before dereferencing fixed fields during post-processing. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: tlb: Flush walk cache when unsharing PMD tables
When huge_pmd_unshare() is called to unshare a PMD table, the
tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true
but the aarch64 tlb_flush() only checked tlb->freed_tables to
determine whether to use TLBF_NONE (vae1is, invalidates walk
cache) or TLBF_NOWALKCACHE (vale1is, leaf-only).
This caused the stale PMD page table entry to remain in the walk cache
after unshare, potentially leading to incorrect page table walks.
Fix by including unshared_tables in the check, so that when
unsharing tables, TLBF_NONE is used and the walk cache is properly
invalidated.
Here is the detailed distinction between vae1is and vale1is:
| Instruction Combination | Actual Invalidation Scope |
| ------------------------ | --------------------------------------------------|
| `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) |
| `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 |
| `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) |
| `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | |
| In the Linux kernel, the following vulnerability has been resolved:
ip6: vti: Use ip6_tnl.net in vti6_changelink().
ip netns add ns1
ip netns add ns2
ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7
ip -n ns1 link set vti6_test netns ns2
ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9
ip netns del ns2
ip netns del ns1
[ 132.495484] ------------[ cut here ]------------
[ 132.497609] kernel BUG at net/core/dev.c:12376!
Commit 61220ab34948 ("vti6: Enable namespace changing") dropped
NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then
move through IFLA_NET_NS_FD. After the move dev_net(dev) points
at the new netns while t->net stays at the creation netns.
vti6_changelink() and vti6_update() still use dev_net(dev) and
dev_net(t->dev). They unlink from one per netns hash and relink
into another. The creation netns is left with a stale entry.
cleanup_net() of that netns later walks freed memory.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: keyspan: fix missing indat transfer sanity check
Add the missing sanity check on the size of usa49wg indat transfers to
avoid parsing stale or uninitialised slab data. |
| In the Linux kernel, the following vulnerability has been resolved:
usbip: vudc: Fix use after free bug in vudc_remove due to race condition
This patch follows up Zheng Wang's 2023 report of a use-after-free in
vudc_remove(). The original thread stalled on Shuah Khan's request for
runtime testing of the unplug/unbind path. This patch supplies that
testing and keeps Zheng's original fix shape.
In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer().
usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer().
vudc_remove() can then free the containing struct vudc while the timer is
still pending or executing.
KASAN confirms the race on an unpatched x86_64 QEMU guest with
CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop
that repeatedly writes a socket fd to usbip_sockfd, closes the socket
pair, and unbinds/rebinds usbip-vudc.0:
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0
Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239
Allocated by task 239:
vudc_probe+0x4d/0xaa0
Freed by task 239:
kfree+0x18f/0x520
device_release_driver_internal+0x388/0x540
unbind_store+0xd9/0x100
This lands in the timer core rather than v_timer() itself because the
embedded timer_list is being walked after its containing struct vudc has
already been freed. The underlying lifetime bug is the same one Zheng
reported.
With v_stop_timer() called from vudc_remove() and the timer deleted
synchronously, the same harness completed 5000 bind/unbind iterations
with no KASAN report. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: omap2430: Fix use-after-free in omap2430_probe()
In omap2430_probe(), of_node_put(np) is called prematurely before the
last access to np, leading to a use-after-free if the node's reference
count drops to zero. Move the of_node_put() calls after the last use of
np in both the success and error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
hpfs: fix a crash if hpfs_map_dnode_bitmap fails
If hpfs_map_dnode_bitmap fails, the code would call hpfs_brelse4 on
uninitialized quad buffer head, causing a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: hw-consumer: fix use-after-free in error path
In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code
was using list_for_each_entry() to iterate through buffers while calling
iio_buffer_put() which can free the current buffer if refcount drops to 0.
The list_for_each_entry() loop macro then evaluates buf->head.next to
continue iteration, accessing the freed buffer.
Fix this by using list_for_each_entry_safe(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: mt6359: fix unchecked return value in mt6358_read_imp
In mt6358_read_imp(), the variable val_v is passed to regmap_read()
but the return value is not checked. If the read fails, val_v remains
uninitialized and its random stack content is subsequently reported
as a measurement result.
Initialize val_v to zero to ensure a predictable value is reported
in case of bus failure and to prevent potential stack data leakage.
This also satisfies static analyzers that might otherwise flag the
variable as used uninitialized. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rds: fix uninitialized trans dereference in CM event handler
rds_rdma_cm_event_handler_cmn() assigns trans only when the RDMA
device is an InfiniBand CA (RDMA_NODE_IB_CA). On any other device
type, e.g. an iWARP RNIC such as siw, trans stays uninitialized, but
the event switch dereferences it: unconditionally in the
RDMA_CM_EVENT_CONNECT_REQUEST case via trans->cm_handle_connect(),
and (with a connection context) in the ROUTE_RESOLVED and
ESTABLISHED cases.
An RDS listener on an iWARP device therefore crashes the kernel as
soon as a connect request arrives: with CONFIG_INIT_STACK_ALL_ZERO
the wild load becomes a NULL dereference at offset 0xa0
(&trans->cm_handle_connect) in the iw_cm_wq workqueue.
GCC masks the bug in default builds by folding the uninitialized
load into &rds_ib_transport; Clang-built kernels take the real
uninitialized path and oops.
The active side can land on a non-IB device too: the id that
rds_ib_conn_path_connect() creates is not restricted to a node type,
so rdma_resolve_addr() binds it to whichever device serves the local
address, and an iWARP RNIC on the same netdev qualifies. The crash
there is different: resolving a route on an iWARP id never fills in
cm_id->route.path_rec, and the ROUTE_RESOLVED case writes
path_rec[0].sl before it calls into the transport.
The iWARP transport was dropped long ago and IB is the only
transport left, so make that explicit: initialize trans to
&rds_ib_transport at declaration, drop the conditional assignment,
reject a connect request that arrives on a non-IB device, and drop a
connection whose address resolved to one instead of resolving a
route on it. The rejection is limited to RDMA_CM_EVENT_CONNECT_REQUEST
on purpose: a non-zero return from the handler makes rdma_cm destroy
the id the event was delivered on, which is right for the request's
freshly created id but would free a connection id that RDS still owns
for any other event. On the active side the id stays ic->i_cm_id and
the connection's shutdown destroys it, so that case returns 0.
[achender: reject only on RDMA_CM_EVENT_CONNECT_REQUEST instead of
bailing out for every event on a non-IB device, so that rdma_cm does
not destroy connection ids RDS still tracks; drop a connection whose
address resolved to a non-IB device before a route is resolved on it;
changelog adjusted] |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: use nfsi->rwsem to protect traversal of the file lock list
Lingfeng identified a bug and suggested two solutions, but both appear
to have issues.
Generally, we cannot release flc_lock while iterating over the file lock
list to avoid use-after-free (UAF) problems with file locks. However,
functions like nfs_delegation_claim_locks and nfs4_reclaim_locks cannot
adhere to this rule because recover_lock or nfs4_lock_delegation_recall
may take a long time. To resolve this, NFS switches to using nfsi->rwsem
for the same protection, and nfs_reclaim_locks follows this approach.
Although nfs_delegation_claim_locks uses so_delegreturn_mutex instead,
this is inadequate since a single inode can have multiple nfs4_state
instances. Therefore, the fix is to also use nfsi->rwsem in this case.
Furthermore, after commit c69899a17ca4 ("NFSv4: Update of VFS byte range
lock must be atomic with the stateid update"), the functions
nfs4_locku_done and nfs4_lock_done also break this rule because they
call locks_lock_inode_wait without holding nfsi->rwsem. Simply adding
this protection could cause many deadlocks, so instead, the call to
locks_lock_inode_wait is moved into _nfs4_proc_setlk. Regarding the bug
fixed by commit c69899a17ca4 ("NFSv4: Update of VFS byte range
lock must be atomic with the stateid update"), it has been resolved
after commit 0460253913e5 ("NFSv4: nfs4_do_open() is incorrectly triggering
state recovery") because all slots are drained before calling
nfs4_do_reclaim, which prevents concurrent stateid changes along this path.
Also, nfs_delegation_claim_locks does not cause this concurrency either
since when _nfs4_proc_setlk is called with NFS_DELEGATED_STATE, no RPC is
sent, so nfs4_lock_done is not called. Therefore,
nfs4_lock_delegation_recall from nfs_delegation_claim_locks is the first
time the stateid is set. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: Protect the recovery list during debugfs reads
Recovery participant records must remain alive while debug_state_print()
walks reco.node_data and formats their fields. The formatter holds
dlm->spinlock, but the recovery participant list is protected by
dlm_reco_state_lock. In particular, dlm_destroy_recovery_area() detaches
the list under dlm_reco_state_lock and frees the detached records after
releasing it. A concurrent debugfs open can therefore read freed memory.
Protect the participant traversal and field reads in debug_state_print()
with dlm_reco_state_lock, matching the existing list writers. This also
serializes the traversal against list_add_tail() during recovery-area
initialization. Make the existing lock available to the debug code
through dlmcommon.h; the lock remains internal to the OCFS2 DLM module.
Release dlm->spinlock after formatting the other domain state and before
acquiring dlm_reco_state_lock, so the debug reader does not nest the two
locks. Leave recovery list insertion, detachment and freeing unchanged.
KASAN report as below:
BUG: KASAN: slab-use-after-free in debug_state_open+0x1169/0x12d0
Read of size 4 at addr ffff88810662ef80 by task dlm-state-stres/896
CPU: 1 UID: 0 PID: 896 Comm: dlm-state-stres Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x93/0xd0
print_report+0xce/0x630
? debug_state_open+0x1169/0x12d0
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x20e/0x420
? debug_state_open+0x1169/0x12d0
kasan_report+0xe0/0x110
? debug_state_open+0x1169/0x12d0
debug_state_open+0x1169/0x12d0
? __pfx_debug_state_open+0x10/0x10
full_proxy_open_regular+0x193/0x310
do_dentry_open+0x595/0x12d0
? __pfx_full_proxy_open_regular+0x10/0x10
vfs_open_consume+0xd1/0x400
? srso_alias_return_thunk+0x5/0xfbef5
path_openat+0x18d0/0x2020
? __pfx_path_openat+0x10/0x10
do_file_open+0x21e/0x470
? __pfx_do_file_open+0x10/0x10
? _raw_spin_unlock+0x23/0x40
? srso_alias_return_thunk+0x5/0xfbef5
? alloc_fd+0x3a6/0x6b0
do_sys_openat2+0xf4/0x1b0
? __pfx_do_sys_openat2+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __fput+0x5b5/0xa60
__x64_sys_openat+0x136/0x1e0
? __pfx___x64_sys_openat+0x10/0x10
do_syscall_64+0x114/0x620
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[Register dump omitted.]
</TASK>
Allocated by task 880:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kmalloc_cache_noprof+0x28d/0x610
dlm_remaster_locks+0x147/0x1d90
dlm_do_recovery+0xde1/0x1580
dlm_recovery_thread+0x109/0x300
kthread+0x351/0x460
ret_from_fork+0x659/0x940
ret_from_fork_asm+0x1a/0x30
Freed by task 880:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x308/0x580
dlm_destroy_recovery_area+0x285/0x460
dlm_remaster_locks+0x17c4/0x1d90
dlm_do_recovery+0xde1/0x1580
dlm_recovery_thread+0x109/0x300
kthread+0x351/0x460
ret_from_fork+0x659/0x940
ret_from_fork_asm+0x1a/0x30
The buggy address belongs to the object at ffff88810662ef80
which belongs to the cache kmalloc-32 of size 32
The buggy address is located 0 bytes inside of
freed 32-byte region [ffff88810662ef80, ffff88810662efa0)
[Page and memory-state dumps omitted.] |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: free the sbi after a grace period
If the "nocase" mount option ntfs3 uses custom hash and dentry compare
functions. Both access ntfs3 superblock private information in rcu
pathwalk. ntfs_put_super() and ntfs3_kill_sb() drop the info without any
rcu delay. A lookup that's still inside the filesystem when the last
reference to the mount is dropped causes a UAF. With a pathwalk held up
in ntfs_d_hash() while the last reference to the mount goes away:
BUG: KASAN: slab-use-after-free in ntfs_nls_to_utf16+0x752/0x940
Read of size 8 at addr ff1100010453c850 by task walker/99
Call Trace:
<TASK>
ntfs_nls_to_utf16+0x752/0x940
ntfs_d_hash+0x22b/0x500
link_path_walk+0x11ad/0x1d30
path_lookupat+0x63/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
[...]
Allocated by task 95:
__kmalloc_cache_noprof+0x249/0x560
ntfs_init_fs_context+0x2db/0x5a0
alloc_fs_context+0x52e/0xc70
[...]
Freed by task 98:
kfree+0x1db/0x5b0
deactivate_locked_super+0x9c/0xf0
cleanup_mnt+0x9f/0x130
task_work_run+0x131/0x250
The bug is currently masked by the grace period in namespace_unlock()
for umount(2). Keep the necessary information until the filesystem
private info is freed and free it with an rcu delay.
ntfs3_free_sbi() now runs from an rcu callback and drops the upcase
table via ntfs_put_shared(). So switch s_shared_lock over to
spin_lock_bh(). Otherwise the callback can deadlock against a task
holding the lock on the same cpu. |
