| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| UI misrepresentation in Passwords in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to spoof UI elements via a crafted HTML page. (Chromium security severity: Low) |
| The MCTP-over-I2C+GPIO target binding in subsys/pmci/mctp/mctp_i2c_gpio_target.c emulates a small pseudo-register file, where the bus controller first writes a register number and then writes or reads payload bytes. The selected register (b->reg_addr) and the data-phase flag (b->rxtx) were never cleared when the controller issued an I2C STOP, so after a completed transfer the target still had a data register selected while the packet buffer that register refers to had already been consumed and set to NULL by mctp_i2c_gpio_target_stop().
A controller on the bus can re-enter the same branch of mctp_i2c_gpio_target_stop() with a NULL buffer using two ordinary transactions and no authentication: first a normal packet write to MCTP_I2C_GPIO_RX_MSG_ADDR followed by STOP (which delivers and frees b->rx_pkt), then a bare read transaction followed by STOP. The failing read_requested() call leaves the stale state untouched and the I2C driver still delivers the STOP callback, which then calls mctp_bus_rx() with a NULL packet. The symmetric case exists on the transmit side, where the stale MCTP_I2C_GPIO_TX_MSG_ADDR selection dereferences b->tx_pkt->end after b->tx_pkt has been cleared and additionally signals b->tx_complete a second time, causing the next outbound packet to be dropped.
The dereference happens in the I2C target interrupt handler, so on any target that traps accesses to address 0 the result is a fatal exception and a device reset or halt — a denial of service inflicted by any device able to act as controller on the shared management bus (for example compromised firmware on a peer MCTP endpoint or on the BMC). On parts where address 0 is readable, the impact degrades to a malformed packet buffer being handed to the MCTP stack and lost transmit packets. No attacker-controlled value is written and no confidentiality or integrity boundary is crossed.
The fix resets b->reg_addr to MCTP_I2C_GPIO_INVALID_ADDR and clears b->rxtx at every STOP, so a new register must be selected before any data phase can run again. Only builds that opt into the experimental CONFIG_MCTP subsystem with CONFIG_MCTP_I2C_GPIO_TARGET=y are affected. |
| A race condition was addressed with improved state handling. This issue is fixed in iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, tvOS 27.2, watchOS 27.2. An app may be able to cause unexpected system termination or corrupt kernel memory. |
| Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg->msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a single element actually occupies 28 bytes) passes the guard yet causes a fixed-size out-of-bounds write of up to one cmsg header (~12 bytes) past the end of the buffer.
Under CONFIG_USERSPACE the recvmsg verifier allocates a kernel-heap copy of the control buffer sized to msg_controllen and runs the implementation against it, so the overflow corrupts kernel heap memory and is triggerable from an unprivileged userspace thread; in supervisor mode it corrupts the caller's buffer.
The path is reachable on a UDP/IP socket with IP_PKTINFO/IPV6_RECVPKTINFO (or hoplimit/timestamping) enabled when the application calls recvmsg() with an undersized control buffer and a datagram is received; part of the overwritten bytes (the destination IP in ipi_addr) is influenced by the received packet.
The fix makes the capacity check use NET_CMSG_SPACE(pktinfo_len) (aligned header + aligned data) and returns -ENOMEM when the buffer is too small. Affected: v3.6.0 through v4.4.0. |
| The issue was addressed with improved checks. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to break out of its sandbox. |
| An input validation issue was addressed with improved input validation. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Tahoe 26.7.2, visionOS 27.2, watchOS 27.2. A remote attacker may be able to cause unexpected app termination. |
| js-toml is a TOML parser for JavaScript, fully compliant with the TOML 1.0.0 Spec. Versions up to and including 1.1.1 parse hexadecimal / octal / binary integer literals via a hand-written `parseBigInt` loop that multiplies a `BigInt` accumulator by the radix once per input digit. Each iteration performs a `BigInt * BigInt` operation on an accumulator that grows linearly with the number of digits already consumed, so the whole loop is O(n²) in the literal length. The lexer regex places no upper bound on the literal length, so a single TOML document containing one ~500 kB hex literal pins one CPU core for ~40 seconds on a modern laptop (Apple M-series, Node v22). Memory amplification is bounded but CPU amplification is severe and grows quadratically: doubling the literal length quadruples the work. A caller that invokes `load()` on attacker-controlled TOML (configuration upload endpoints, CI/CD systems ingesting third-party `*.toml`, IDE plugins, build tools) is exposed to a single-request CPU exhaustion DoS. Version 1.1.2 fixes the issue. |
| Next.js is a React framework for building full-stack web applications. From 15.2.0 to before 15.5.18 and 16.2.6, it was found that the fix addressing CVE-2026-44575 did not apply to middleware.ts with Turbopack. This vulnerability is fixed in 15.5.18 and 16.2.6. |
| isomorphic-git is a pure JavaScript implementation of Git for Node.js and browsers. Prior to 1.38.6, isomorphic-git's git.checkout writes new child paths through symlinked leading directory components without checking them. A malicious repository can first place a directory symlink and later replace the tree state with a child file beneath that path; the usual trigger is a clone followed by a later pull, while a single clone can trigger the issue when a symlink already exists or the consuming application accesses the tree. With Node fs on Linux or macOS, the operating system can resolve the write outside the working tree, permitting arbitrary host file writes and possible code execution. Node fs on Windows usually blocks the symlink plant without additional privilege, and browser or in-memory providers limit impact to their virtual filesystem and are affected only when they implement symlink creation and following. This issue is fixed in version 1.38.6. |
| Use of uninitialized variable in Media in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to potentially read memory inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Confused deputy in DevTools in Google Chrome prior to 156.0.8078.47 allowed a remote attacker leveraging social engineering to obtain sensitive information via a crafted Chrome extension. (Chromium security severity: Low) |
| Missing authorization in Extensions in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Low) |
| Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS, PDU and SCD hardware. From 2.8.3 to 2.8.5, upsmon in clients/upsmon.c inserts the server-supplied ups.alarm value into shell commands executed by notify(), async_notify(), and wall(). When a monitored device reports an ALARM state and an operator has configured NOTIFYCMD with EXEC in NOTIFYFLAG ALARM, shell metacharacters in the alarm text are evaluated on POSIX or Windows and can execute arbitrary operating-system commands as the upsmon account, which is commonly root. An attacker can control the value through a malicious or compromised upsd, a man-in-the-middle on a plaintext upsd to upsmon connection, or a compromised UPS device whose driver supplies the alarm upstream of upsd; TLS between upsd and upsmon does not mitigate the compromised-device path. This vulnerability is fixed in 2.8.6. |
| Open Access Management (OpenAM) is an access management solution. Prior to 16.1.1, the `Cross-Domain Single Sign-On` (`CDSSO`) servlet allows a logged-in user's raw OpenAM session token to be POSTed to an attacker-controlled URL. An attacker who induces an authenticated victim to visit a crafted URL can receive the session credential and potentially hijack the session. Deployments must have `CDSSO` enabled, as is common in multi-domain deployments, and exploitation is additionally gated on a non-default configuration being absent. This issue is fixed in version 16.1.1. |
| Element Web and Element Desktop before 1.12.32 accept guest credentials from URL fragment parameters in loadSession, allowing remote unauthenticated attackers to log out users and clear local stores. Attackers can lure logged-in users into opening links with guest_user_id and guest_access_token to force an attacker-controlled guest session and destroy unbacked end-to-end encryption keys. |
| pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.5, constructed BIT STRING decoding repeatedly shifts and copies the complete bit value accumulated from earlier fragments. Attacker-controlled BER or CER input contains many constructed BIT STRING fragments; schema-driven DER also accepts a definite-length constructed BIT STRING. BitStringPayloadDecoder repeatedly calls BitString.fromOctetString with the prior bitString as prepend, shifting an ever-growing SizedInteger for each fragment and causing quadratic work. Large fragmented values can exhaust CPU during decode() without requiring later conversion or formatting. This issue is fixed in version 0.6.5. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used asn1.fromDer(), BIT STRING decoding, maxDepth to process the relevant input or security decision. node-forge decoded ASN.1 stored inside BIT STRING values without consistently applying the configured maxDepth limit and recursively retained copies at each nesting level. Crafted DER containing nested BIT STRINGs could cause excessive recursion, CPU use, and quadratic memory consumption during asn1.fromDer(). This issue is fixed in version 1.4.1. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used forge.tls.createConnection(), TLS record processing, process() to process the relevant input or security decision. node-forge processed received TLS records recursively, consuming one JavaScript stack frame per record in a single input chunk. A remote peer could send thousands of small records together and exhaust the call stack, causing an uncaught exception and denial of service. This issue is fixed in version 1.4.1. |
| ZITADEL 4.0.0 before 4.19.5 contains a host header injection vulnerability in the Login V2 UI that allows unauthenticated attackers to poison password-reset, invite, and email-verification links by supplying untrusted x-zitadel-public-host, x-zitadel-forward-host, or x-forwarded-host headers. Attackers knowing a victim's login name can point the links in genuine emails at their host, harvest the single-use codes when the links are opened, and take over accounts including instance administrators. |
| Crawl4AI before 0.9.5 contains a denial of service vulnerability in the Docker API server where _clamp_untrusted() fails to cap the delay_before_return_html, mean_delay, and max_range fields of untrusted CrawlerRunConfig bodies. Unauthenticated attackers can send huge values to /crawl or /crawl/stream to hold browser pages or stall the rate limiter, exhausting the page pool and blocking other crawls. |
