| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use of Hard-coded Cryptographic Key in JWT token authentication in Apache OFBiz 24.09.06 and 24.09.07 on all platforms allows an unauthenticated, network-reachable attacker to obtain full administrative access via a forged JWT signed with the factory-default security.token.key value that CVE-2026-31986 removed from newly generated configurations, on a deployment that upgraded from a release predating that fix while retaining its existing security.properties with security.internal.sso.enabled set to true. Users are recommended to upgrade to version 24.09.08. Upgrading alone does not replace an already-configured key: deployments that carried framework/security/config/security.properties forward from a release predating the CVE-2026-31986 fix must also run './gradlew rotateSecretKeys' after upgrading, since the existing generateSecretKeys task leaves an already-set value untouched. |
| Missing check for ACCOUNTING_UPDATE / ACCOUNTING_CREATE in accounting in allows user with only ACCOUNTING_VIEW permission to update/create PaymentApplication.
Affected versions before : 24.09.08
Users are recommended to upgrade to version 24.09.08 which fixes this issue. |
| Improper Input Validation in Order Returns in Apache OFBiz 24.09.07 on all platforms allows an authenticated user without the ORDERMGR_CREATE permission to persist an arbitrary price on a return item via the createReturnItem service, bypassing the intended server-computed price ceiling. Users are recommended to upgrade to version 24.09.08, which fixes this issue. |
| Direct Request ('Forced Browsing') in the Content Manager component in Apache OFBiz 24.09.07 on all platforms allows an authenticated user holding only view-only content permissions (OFBTOOLS_VIEW and CONTENTMGR_VIEW) to re-parent content associations they do not own or manage via a direct POST request to the moveContentJson endpoint, which performs no permission check, unlike the equivalent updateContent/createContentAssoc/removeContentAssoc services that require genericContentPermission UPDATE. Users are recommended to upgrade to version 24.09.08, which fixes this issue. |
| Inconsistent interpretation of HTTP requests ('HTTP Request/Response smuggling') vulnerability in Apache Sling Engine. The engine's query/form parser accepts non-standard percent-escapes, wrong charsets, and continues request processing on such errors.
This issue affects Apache Sling Engine: before 3.0.4.
Users are recommended to upgrade to version 3.0.4, which fixes the issue. |
| XML External Entity (XXE) Injection in ContentWorker in Apache OFBiz 24.09 before 24.09.08 on all platforms allows a remote authenticated attacker holding content-author permission to read arbitrary server files and trigger server-side request forgery by storing a crafted text/xml DataResource containing an external entity declaration, causing ContentWorker's rendering of that content — via renderContentAsText and related CMS/help render paths — to parse the stored XML using FreeMarker's default NodeModel.parse DocumentBuilderFactory, which enables neither FEATURE_SECURE_PROCESSING nor external-entity/DTD restrictions, resolving the external entity and returning its content in the rendered response. Users are recommended to upgrade to version 24.09.08, which fixes this issue. |
| Apache Airflow's Task SDK secret cache built its keys from the team name and secret id with unescaped `_` delimiters, so different (team, secret id) pairs could collide. In multi-team deployments a Dag author could read another team's Variable or Connection value by crafting a colliding secret id. Only deployments with both `core.multi_team = True` and `secrets.use_cache = True` are affected.
Users are advised to upgrade to apache-airflow 3.4.0 or later. Deployments that cannot upgrade can set `secrets.use_cache = False`. |
| Allocation of Resources Without Limits or Throttling vulnerability in Apache Axis2/Java. The JSON message builders, including the Gson, Moshi and HTTP/2 variants, buffered the entire request body with no size limit, so an unauthenticated caller could exhaust server memory with a large JSON request. Version 2.0.2 bounds JSON request bodies with the configurable jsonMaxRequestSize parameter. This issue affects Apache Axis2/Java: through 2.0.1. Users are recommended to upgrade to version 2.0.2, which fixes the issue. |
| A missing critical step in authentication vulnerability in Apache Tomcat when the JNDI realm was configured with with a non GSSAPI SASL authentication mechanism allowed attackers to authenticate without providing the correct password.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.26, from 10.1.0-M1 through 10.1.60, from 9.0.0.M1 through 9.0.122.
The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. |
| Server-Side Request Forgery (SSRF) vulnerability in Apache Axis2/Java. When Axis2 built a service description from a WSDL, through ServiceClient, AxisService.createClientSideAxisService or WSDLToAxisServiceBuilder, it fetched the absolute URLs in wsdl:import locations and in xsd:import and xsd:include schemaLocations with no scheme or host restriction; the AAR and WAR deployment resolvers also passed absolute schema locations on to the network. An attacker who controls a WSDL or schema processed by an Axis2 application could therefore make the JVM send requests to arbitrary internal or external hosts. This issue affects Apache Axis2/Java: through 2.0.1. Users are recommended to upgrade to version 2.0.2, which fixes the issue. |
| Improper Restriction of XML External Entity Reference vulnerability in Apache Axis2/Java. When a client built an AxisService from a WSDL URL, through ServiceClient or AxisService.createClientSideAxisService, wsdl4j import resolution was enabled and the documents named by wsdl:import and xsd:import were parsed by wsdl4j's own XML parser, which processes DOCTYPE declarations and external entities. An attacker who controls a WSDL, or a document it imports, could therefore read local files or make the JVM issue network requests. This issue affects Apache Axis2/Java: through 2.0.1. Users are recommended to upgrade to version 2.0.2, which fixes the issue. |
| Allocation of Resources Without Limits or Throttling vulnerability in Apache Axis2/Java. The multipart/form-data and application/x-www-form-urlencoded message builders read the request body directly from the transport stream with no size limit, so the servlet container's post-size limit did not apply, and multipart temporary files were not deleted. An unauthenticated caller could exhaust memory or disk. Version 2.0.2 bounds these bodies with configurable limits and deletes temporary files. This issue affects Apache Axis2/Java: through 2.0.1. Users are recommended to upgrade to version 2.0.2, which fixes the issue. |
| Improper Neutralization of Input During Web Page Generation (Cross-site Scripting) vulnerability in the OpenAPI module of Apache Axis2/Java. The Swagger UI page served by the OpenAPI module wrote a value derived from the request's Host header into the page without encoding, allowing script injection in the context of the Axis2 origin. This issue affects Apache Axis2/Java: 2.0.1. Users are recommended to upgrade to version 2.0.2, which fixes the issue. |
| Server-Side Request Forgery (SSRF) vulnerability in Apache Axis2/Java. An unauthenticated caller could supply a non-anonymous WS-Addressing wsa:ReplyTo or wsa:FaultTo address, and Axis2 would open a connection to that address to deliver the response or fault, allowing requests to internal hosts and delivery of response content to a host of the caller's choosing. From 2.0.2, decoupled responses are refused unless allowNonAnonymousResponseEndpoints is enabled, and enabled endpoints are restricted by scheme and screened at both the header-parsing and transport-selection layers. This issue affects Apache Axis2/Java: through 2.0.1. Users are recommended to upgrade to version 2.0.2, which fixes the issue. |
| Direct Request ('Forced Browsing') vulnerability in Apache Axis2/Java. The exposeServiceMetadata service parameter was enforced only on the ?wsdl, ?wsdl2 and ?xsd queries. For a service that had disabled it, the packaged .wsdl and .xsd file routes, the named-WSDL ?wsdl=NAME route of the standalone HTTP server, the OpenAPI, Swagger UI and MCP catalog endpoints, the services listing, WS-MetadataExchange GetMetadata and the ping module still disclosed its metadata to anonymous callers, including operation names and request and response schemas. This issue affects Apache Axis2/Java: through 2.0.1. Users are recommended to upgrade to version 2.0.2, which fixes the issue. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CoAP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2.
When the CoAP consumer could not build its response once the route had completed, CamelCoapResource caught the resulting exception and sent its message back to the CoAP client as the payload of a 5.00 Internal Server Error response. The typical case is a type conversion failure: the consumer converts the final message body to the byte[] payload, and the CamelCoapMaxAge and CamelCoapETag headers to their types, after the route has returned, and therefore outside the route's error handler. On the affected releases the message of such a failure names the class of the value being converted, carries the value's string form, and ends with the class name and message of the underlying cause, so a remote CoAP client could read internal detail about the deployment: class and package names, the string form of the value, such as the path of a file body, and whatever the cause carries, which in practice can include paths, host names and connection detail of a backend. The consumer had no option to suppress this, unlike the HTTP consumers, which offer a muteException option for that purpose. The exception raised by a failing route was not sent: the consumer did not check whether the exchange had failed, and answered a route failure with 2.05 Content and whatever body the message held at that point. Reaching the disclosure therefore requires a route whose completed response a remote client can make unconvertible, which depends on how the route is written.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. The upgrade is enough on its own: the new muteException consumer option defaults to true on all three fixed release lines, so the error response carries no payload without any configuration change. For deployments that cannot upgrade immediately, make sure the response can always be built once the route has completed: convert the body to byte[] or String as the last step of each route that consumes from a coap endpoint, for example with convertBodyTo, give the CamelCoapMaxAge and CamelCoapETag headers only values of their own types, and add an onException handler that marks the failure as handled and sets the response body explicitly, so that a conversion failure is raised and replaced inside the route rather than in the consumer. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component.
This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2.
DoclingProducer builds the command line of the external docling tool and appends to it the custom arguments supplied in the CamelDoclingCustomArguments header, a list of strings whose flags the fix for CVE-2026-40047 restricted to an allowlist. That fix also introduced validatePathSafety to keep path-like argument values inside the intended directory, but the method only looked for relative traversal: it rejected a value containing a traversal sequence such as ../ and a value whose normalized form still held a .. element. It never checked whether a value was an absolute path, and an absolute path without traversal segments contains neither, so it passed unchanged. Every path-like value went through this check, whether it was a separate list element following its flag or was attached to the flag after an equals sign, so an absolute path was accepted in either form, for example as the directory given to the allowlisted --artifacts-path flag, which tells docling where to find its model artifacts. Such a value reached the docling command line as given, so a party able to choose the custom arguments could point the docling process at any directory the Camel process can access, outside the working directory that the check was meant to keep path values in, which is the outcome the CVE-2026-40047 fix set out to prevent. Only the CLI mode, which is the default, passes custom arguments to docling. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingCustomArguments header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the custom arguments. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component.
This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2.
DoclingProducer runs the external docling tool in CLI mode, the default, and tells it where to write the converted document through the --output flag. When the CamelDoclingOutputFilePath header was set, addOutputDirectoryArguments handed its value to that flag verbatim: the value was not normalized, an absolute path or a path containing .. segments was accepted as given, and no endpoint option could confine it to a directory. The custom-argument validation added by the fix for CVE-2026-40047 refuses the --output and -o flags in the CamelDoclingCustomArguments header and tells callers to choose the output directory with this header instead, so the one value that decides where docling writes reached the command line without any of the checks applied to custom arguments. Docling writes the conversion result, as Markdown, HTML, JSON or text, into that directory, naming the file after the input file, and the producer afterwards removes only its own temporary directory, so the file is left in place. A party able to set the header could therefore have conversion output created in any directory the Camel process can write to. The content of such a file is the conversion of the document carried by the message, so it is shaped by whoever supplies that document without being written byte for byte, and when the document content arrives in the message body the producer stores it under a random temporary name, which the output file then carries. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering. The docling-serve mode does not use the header.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The fix adds an outputBaseDirectory endpoint option that is unset by default, so after upgrading, set it on every docling endpoint whose CamelDoclingOutputFilePath header can carry a value influenced from outside the deployment; without it the header is normalized but can still name any directory. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingOutputFilePath header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the output directory. |
| Insufficient Session Expiration vulnerability in Apache Camel Keycloak component.
This issue affects Apache Camel: from 4.16.0 before 4.18.5, from 4.19.0 before 4.22.2.
When token introspection is enabled on the camel-keycloak KeycloakSecurityPolicy (useTokenIntrospection=true), the security processor validates the access token of a request by sending it to Keycloak's OAuth 2.0 token introspection endpoint, and accepts the token while the response reports it as active. The introspection endpoint reports a token as inactive once its exp (expiration) time has passed, so on this path the active flag is what enforces token expiry. Introspection results are cached by default (introspectionCacheEnabled=true, introspectionCacheTtl=60 seconds), and both cache implementations shipped with the component, ConcurrentMapTokenCache and CaffeineTokenCache, expired an entry a fixed time after it was inserted, without bounding that lifetime by the exp claim that the cached response already carried. KeycloakSecurityProcessor in turn checked only the active flag of the result, on every path that uses introspection, and never compared exp with the current time. A response cached shortly before the token expired was therefore served to later requests carrying the same token for up to the configured time-to-live after the token's expiry, and those requests were admitted with the roles and permissions the expired token had carried, although RFC 7662, which defines token introspection, states that a response containing exp must not be cached beyond that time. The access token is supplied by the caller with each request, typically as a bearer token in the Authorization header, so a caller holding a token that was valid moments earlier could keep using it after it expired, for as long as the cached entry lived. The window is bounded by introspectionCacheTtl, which is 60 seconds by default and 300 to 600 seconds where the documentation's recommendation for internal services was followed, and it opens only for a token that the same Camel process introspected and cached while the token was still active. The issue grants nothing beyond what the token already carried: it allows no token forgery and no privilege escalation, and token introspection is not enabled by default, which is why the severity is assessed medium. The local JWT verification path, used when introspection is disabled, is not affected by this issue.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.16.x, 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, set introspectionCacheEnabled=false on the KeycloakSecurityPolicy, so that every request is checked against the introspection endpoint, which reports an expired token as inactive, at the cost of one introspection call per request. Lowering introspectionCacheTtl only narrows the window and does not close it. |
| Authenticated Path Traversal in Catalog Image Management allows writing image files outside the intended directory in Apache OFBiz.
This issue affects Apache OFBiz: before 24.09.08.
Users are recommended to upgrade to version 24.09.08, which fixes the issue. |
