| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix WARNING in ip_vs_app_net_cleanup()
During the initialization of ip_vs_app_net_init(), if file ip_vs_app
fails to be created, the initialization is successful by default.
Therefore, the ip_vs_app file doesn't be found during the remove in
ip_vs_app_net_cleanup(). It will cause WRNING.
The following is the stack information:
name 'ip_vs_app'
WARNING: CPU: 1 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
Call Trace:
<TASK>
ops_exit_list+0x125/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: mdio: fix undefined behavior in bit shift for __mdiobus_register
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
__mdiobus_register+0x49d/0x4e0
fixed_mdio_bus_init+0xd8/0x12d
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues
When running `test_sockmap` selftests, the following warning appears:
WARNING: CPU: 2 PID: 197 at net/core/stream.c:205 sk_stream_kill_queues+0xd3/0xf0
Call Trace:
<TASK>
inet_csk_destroy_sock+0x55/0x110
tcp_rcv_state_process+0xd28/0x1380
? tcp_v4_do_rcv+0x77/0x2c0
tcp_v4_do_rcv+0x77/0x2c0
__release_sock+0x106/0x130
__tcp_close+0x1a7/0x4e0
tcp_close+0x20/0x70
inet_release+0x3c/0x80
__sock_release+0x3a/0xb0
sock_close+0x14/0x20
__fput+0xa3/0x260
task_work_run+0x59/0xb0
exit_to_user_mode_prepare+0x1b3/0x1c0
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x48/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root case is in commit 84472b436e76 ("bpf, sockmap: Fix more uncharged
while msg has more_data"), where I used msg->sg.size to replace the tosend,
causing breakage:
if (msg->apply_bytes && msg->apply_bytes < tosend)
tosend = psock->apply_bytes; |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw: Fix segmentation fault at module unload
Move am65_cpsw_nuss_phylink_cleanup() call to after
am65_cpsw_nuss_cleanup_ndev() so phylink is still valid
to prevent the below Segmentation fault on module remove when
first slave link is up.
[ 31.652944] Unable to handle kernel paging request at virtual address 00040008000005f4
[ 31.684627] Mem abort info:
[ 31.687446] ESR = 0x0000000096000004
[ 31.704614] EC = 0x25: DABT (current EL), IL = 32 bits
[ 31.720663] SET = 0, FnV = 0
[ 31.723729] EA = 0, S1PTW = 0
[ 31.740617] FSC = 0x04: level 0 translation fault
[ 31.756624] Data abort info:
[ 31.759508] ISV = 0, ISS = 0x00000004
[ 31.776705] CM = 0, WnR = 0
[ 31.779695] [00040008000005f4] address between user and kernel address ranges
[ 31.808644] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 31.814928] Modules linked in: wlcore_sdio wl18xx wlcore mac80211 libarc4 cfg80211 rfkill crct10dif_ce phy_gmii_sel ti_am65_cpsw_nuss(-) sch_fq_codel ipv6
[ 31.828776] CPU: 0 PID: 1026 Comm: modprobe Not tainted 6.1.0-rc2-00012-gfabfcf7dafdb-dirty #160
[ 31.837547] Hardware name: Texas Instruments AM625 (DT)
[ 31.842760] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 31.849709] pc : phy_stop+0x18/0xf8
[ 31.853202] lr : phylink_stop+0x38/0xf8
[ 31.857031] sp : ffff80000a0839f0
[ 31.860335] x29: ffff80000a0839f0 x28: ffff000000de1c80 x27: 0000000000000000
[ 31.867462] x26: 0000000000000000 x25: 0000000000000000 x24: ffff80000a083b98
[ 31.874589] x23: 0000000000000800 x22: 0000000000000001 x21: ffff000001bfba90
[ 31.881715] x20: ffff0000015ee000 x19: 0004000800000200 x18: 0000000000000000
[ 31.888842] x17: ffff800076c45000 x16: ffff800008004000 x15: 000058e39660b106
[ 31.895969] x14: 0000000000000144 x13: 0000000000000144 x12: 0000000000000000
[ 31.903095] x11: 000000000000275f x10: 00000000000009e0 x9 : ffff80000a0837d0
[ 31.910222] x8 : ffff000000de26c0 x7 : ffff00007fbd6540 x6 : ffff00007fbd64c0
[ 31.917349] x5 : ffff00007fbd0b10 x4 : ffff00007fbd0b10 x3 : ffff00007fbd3920
[ 31.924476] x2 : d0a07fcff8b8d500 x1 : 0000000000000000 x0 : 0004000800000200
[ 31.931603] Call trace:
[ 31.934042] phy_stop+0x18/0xf8
[ 31.937177] phylink_stop+0x38/0xf8
[ 31.940657] am65_cpsw_nuss_ndo_slave_stop+0x28/0x1e0 [ti_am65_cpsw_nuss]
[ 31.947452] __dev_close_many+0xa4/0x140
[ 31.951371] dev_close_many+0x84/0x128
[ 31.955115] unregister_netdevice_many+0x130/0x6d0
[ 31.959897] unregister_netdevice_queue+0x94/0xd8
[ 31.964591] unregister_netdev+0x24/0x38
[ 31.968504] am65_cpsw_nuss_cleanup_ndev.isra.0+0x48/0x70 [ti_am65_cpsw_nuss]
[ 31.975637] am65_cpsw_nuss_remove+0x58/0xf8 [ti_am65_cpsw_nuss] |
| In the Linux kernel, the following vulnerability has been resolved:
serial: imx: Add missing .thaw_noirq hook
The following warning is seen with non-console UART instance when
system hibernates.
[ 37.371969] ------------[ cut here ]------------
[ 37.376599] uart3_root_clk already disabled
[ 37.380810] WARNING: CPU: 0 PID: 296 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0
...
[ 37.506986] Call trace:
[ 37.509432] clk_core_disable+0xa4/0xb0
[ 37.513270] clk_disable+0x34/0x50
[ 37.516672] imx_uart_thaw+0x38/0x5c
[ 37.520250] platform_pm_thaw+0x30/0x6c
[ 37.524089] dpm_run_callback.constprop.0+0x3c/0xd4
[ 37.528972] device_resume+0x7c/0x160
[ 37.532633] dpm_resume+0xe8/0x230
[ 37.536036] hibernation_snapshot+0x288/0x430
[ 37.540397] hibernate+0x10c/0x2e0
[ 37.543798] state_store+0xc4/0xd0
[ 37.547203] kobj_attr_store+0x1c/0x30
[ 37.550953] sysfs_kf_write+0x48/0x60
[ 37.554619] kernfs_fop_write_iter+0x118/0x1ac
[ 37.559063] new_sync_write+0xe8/0x184
[ 37.562812] vfs_write+0x230/0x290
[ 37.566214] ksys_write+0x68/0xf4
[ 37.569529] __arm64_sys_write+0x20/0x2c
[ 37.573452] invoke_syscall.constprop.0+0x50/0xf0
[ 37.578156] do_el0_svc+0x11c/0x150
[ 37.581648] el0_svc+0x30/0x140
[ 37.584792] el0t_64_sync_handler+0xe8/0xf0
[ 37.588976] el0t_64_sync+0x1a0/0x1a4
[ 37.592639] ---[ end trace 56e22eec54676d75 ]---
On hibernating, pm core calls into related hooks in sequence like:
.freeze
.freeze_noirq
.thaw_noirq
.thaw
With .thaw_noirq hook being absent, the clock will be disabled in a
unbalanced call which results the warning above.
imx_uart_freeze()
clk_prepare_enable()
imx_uart_suspend_noirq()
clk_disable()
imx_uart_thaw
clk_disable_unprepare()
Adding the missing .thaw_noirq hook as imx_uart_resume_noirq() will have
the call sequence corrected as below and thus fix the warning.
imx_uart_freeze()
clk_prepare_enable()
imx_uart_suspend_noirq()
clk_disable()
imx_uart_resume_noirq()
clk_enable()
imx_uart_thaw
clk_disable_unprepare() |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: clear out_curr if all frag chunks of current msg are pruned
A crash was reported by Zhen Chen:
list_del corruption, ffffa035ddf01c18->next is NULL
WARNING: CPU: 1 PID: 250682 at lib/list_debug.c:49 __list_del_entry_valid+0x59/0xe0
RIP: 0010:__list_del_entry_valid+0x59/0xe0
Call Trace:
sctp_sched_dequeue_common+0x17/0x70 [sctp]
sctp_sched_fcfs_dequeue+0x37/0x50 [sctp]
sctp_outq_flush_data+0x85/0x360 [sctp]
sctp_outq_uncork+0x77/0xa0 [sctp]
sctp_cmd_interpreter.constprop.0+0x164/0x1450 [sctp]
sctp_side_effects+0x37/0xe0 [sctp]
sctp_do_sm+0xd0/0x230 [sctp]
sctp_primitive_SEND+0x2f/0x40 [sctp]
sctp_sendmsg_to_asoc+0x3fa/0x5c0 [sctp]
sctp_sendmsg+0x3d5/0x440 [sctp]
sock_sendmsg+0x5b/0x70
and in sctp_sched_fcfs_dequeue() it dequeued a chunk from stream
out_curr outq while this outq was empty.
Normally stream->out_curr must be set to NULL once all frag chunks of
current msg are dequeued, as we can see in sctp_sched_dequeue_done().
However, in sctp_prsctp_prune_unsent() as it is not a proper dequeue,
sctp_sched_dequeue_done() is not called to do this.
This patch is to fix it by simply setting out_curr to NULL when the
last frag chunk of current msg is dequeued from out_curr stream in
sctp_prsctp_prune_unsent(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/scheduler: fix fence ref counting
We leaked dependency fences when processes were beeing killed.
Additional to that grab a reference to the last scheduled fence. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: properly pin the parent in blkcg_css_online
blkcg_css_online is supposed to pin the blkcg of the parent, but
397c9f46ee4d refactored things and along the way, changed it to pin the
css instead. This results in extra pins, and we end up leaking blkcgs
and cgroups. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Drop fpregs lock before inheriting FPU permissions
Mike Galbraith reported the following against an old fork of preempt-rt
but the same issue also applies to the current preempt-rt tree.
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: systemd
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Preemption disabled at:
fpu_clone
CPU: 6 PID: 1 Comm: systemd Tainted: G E (unreleased)
Call Trace:
<TASK>
dump_stack_lvl
? fpu_clone
__might_resched
rt_spin_lock
fpu_clone
? copy_thread
? copy_process
? shmem_alloc_inode
? kmem_cache_alloc
? kernel_clone
? __do_sys_clone
? do_syscall_64
? __x64_sys_rt_sigprocmask
? syscall_exit_to_user_mode
? do_syscall_64
? syscall_exit_to_user_mode
? do_syscall_64
? syscall_exit_to_user_mode
? do_syscall_64
? exc_page_fault
? entry_SYSCALL_64_after_hwframe
</TASK>
Mike says:
The splat comes from fpu_inherit_perms() being called under fpregs_lock(),
and us reaching the spin_lock_irq() therein due to fpu_state_size_dynamic()
returning true despite static key __fpu_state_size_dynamic having never
been enabled.
Mike's assessment looks correct. fpregs_lock on a PREEMPT_RT kernel disables
preemption so calling spin_lock_irq() in fpu_inherit_perms() is unsafe. This
problem exists since commit
9e798e9aa14c ("x86/fpu: Prepare fpu_clone() for dynamically enabled features").
Even though the original bug report should not have enabled the paths at
all, the bug still exists.
fpregs_lock is necessary when editing the FPU registers or a task's FP
state but it is not necessary for fpu_inherit_perms(). The only write
of any FP state in fpu_inherit_perms() is for the new child which is
not running yet and cannot context switch or be borrowed by a kernel
thread yet. Hence, fpregs_lock is not protecting anything in the new
child until clone() completes and can be dropped earlier. The siglock
still needs to be acquired by fpu_inherit_perms() as the read of the
parent's permissions has to be serialised.
[ bp: Cleanup splat. ] |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: enforce a consistent minimal mtu
macvlan should enforce a minimal mtu of 68, even at link creation.
This patch avoids the current behavior (which could lead to crashes
in ipv6 stack if the link is brought up)
$ ip link add macvlan1 link eno1 mtu 8 type macvlan # This should fail !
$ ip link sh dev macvlan1
5: macvlan1@eno1: <BROADCAST,MULTICAST> mtu 8 qdisc noop
state DOWN mode DEFAULT group default qlen 1000
link/ether 02:47:6c:24:74:82 brd ff:ff:ff:ff:ff:ff
$ ip link set macvlan1 mtu 67
Error: mtu less than device minimum.
$ ip link set macvlan1 mtu 68
$ ip link set macvlan1 mtu 8
Error: mtu less than device minimum. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/xen: Fix eventfd error handling in kvm_xen_eventfd_assign()
Should not call eventfd_ctx_put() in case of error.
[Introduce new goto target instead. - Paolo] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix optc2_configure warning on dcn314
[Why]
dcn314 uses optc2_configure_crc() that wraps
optc1_configure_crc() + set additional registers
not applicable to dcn314.
It's not critical but when used leads to warning like:
WARNING: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c
Call Trace:
<TASK>
generic_reg_set_ex+0x6d/0xe0 [amdgpu]
optc2_configure_crc+0x60/0x80 [amdgpu]
dc_stream_configure_crc+0x129/0x150 [amdgpu]
amdgpu_dm_crtc_configure_crc_source+0x5d/0xe0 [amdgpu]
[How]
Use optc1_configure_crc() directly |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open()
snd_usbmidi_output_open() has a check of the NULL port with
snd_BUG_ON(). snd_BUG_ON() was used as this shouldn't have happened,
but in reality, the NULL port may be seen when the device gives an
invalid endpoint setup at the descriptor, hence the driver skips the
allocation. That is, the check itself is valid and snd_BUG_ON()
should be dropped from there. Otherwise it's confusing as if it were
a real bug, as recently syzbot stumbled on it. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Check sb_bsize_shift after reading superblock
Fuzzers like to scribble over sb_bsize_shift but in reality it's very
unlikely that this field would be corrupted on its own. Nevertheless it
should be checked to avoid the possibility of messy mount errors due to
bad calculations. It's always a fixed value based on the block size so
we can just check that it's the expected value.
Tested with:
mkfs.gfs2 -O -p lock_nolock /dev/vdb
for i in 0 -1 64 65 32 33; do
gfs2_edit -p sb field sb_bsize_shift $i /dev/vdb
mount /dev/vdb /mnt/test && umount /mnt/test
done
Before this patch we get a withdraw after
[ 76.413681] gfs2: fsid=loop0.0: fatal: invalid metadata block
[ 76.413681] bh = 19 (type: exp=5, found=4)
[ 76.413681] function = gfs2_meta_buffer, file = fs/gfs2/meta_io.c, line = 492
and with UBSAN configured we also get complaints like
[ 76.373395] UBSAN: shift-out-of-bounds in fs/gfs2/ops_fstype.c:295:19
[ 76.373815] shift exponent 4294967287 is too large for 64-bit type 'long unsigned int'
After the patch, these complaints don't appear, mount fails immediately
and we get an explanation in dmesg. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: Bounds-check struct nlmsgerr creation
In preparation for FORTIFY_SOURCE doing bounds-check on memcpy(),
switch from __nlmsg_put to nlmsg_put(), and explain the bounds check
for dealing with the memcpy() across a composite flexible array struct.
Avoids this future run-time warning:
memcpy: detected field-spanning write (size 32) of single field "&errmsg->msg" at net/netlink/af_netlink.c:2447 (size 16) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Prevent bpf program recursion for raw tracepoint probes
We got report from sysbot [1] about warnings that were caused by
bpf program attached to contention_begin raw tracepoint triggering
the same tracepoint by using bpf_trace_printk helper that takes
trace_printk_lock lock.
Call Trace:
<TASK>
? trace_event_raw_event_bpf_trace_printk+0x5f/0x90
bpf_trace_printk+0x2b/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
__unfreeze_partials+0x5b/0x160
...
The can be reproduced by attaching bpf program as raw tracepoint on
contention_begin tracepoint. The bpf prog calls bpf_trace_printk
helper. Then by running perf bench the spin lock code is forced to
take slow path and call contention_begin tracepoint.
Fixing this by skipping execution of the bpf program if it's
already running, Using bpf prog 'active' field, which is being
currently used by trampoline programs for the same reason.
Moving bpf_prog_inc_misses_counter to syscall.c because
trampoline.c is compiled in just for CONFIG_BPF_JIT option.
[1] https://lore.kernel.org/bpf/YxhFe3EwqchC%2FfYf@krava/T/#t |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: fix xdp_rxq_info bug after suspend/resume
The following sequence currently causes a driver bug warning
when using virtio_net:
# ip link set eth0 up
# echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem)
<resume>
# ip link set eth0 down
Missing register, driver bug
WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60
Call trace:
xdp_rxq_info_unreg+0x58/0x60
virtnet_close+0x58/0xac
__dev_close_many+0xac/0x140
__dev_change_flags+0xd8/0x210
dev_change_flags+0x24/0x64
do_setlink+0x230/0xdd0
...
This happens because virtnet_freeze() frees the receive_queue
completely (including struct xdp_rxq_info) but does not call
xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the
receive_queue again but does not call xdp_rxq_info_reg().
Actually, parts of virtnet_freeze_down() and virtnet_restore_up()
are almost identical to virtnet_close() and virtnet_open(): only
the calls to xdp_rxq_info_(un)reg() are missing. This means that
we can fix this easily and avoid such problems in the future by
just calling virtnet_close()/open() from the freeze/restore handlers.
Aside from adding the missing xdp_rxq_info calls the only difference
is that the refill work is only cancelled if netif_running(). However,
this should not make any functional difference since the refill work
should only be active if the network interface is actually up. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix lockdep splat in in6_dump_addrs()
As reported by syzbot, we should not use rcu_dereference()
when rcu_read_lock() is not held.
WARNING: suspicious RCU usage
5.19.0-rc2-syzkaller #0 Not tainted
net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz-executor326/3617:
#0: ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223
stack backtrace:
CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175
inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300
netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275
__netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380
netlink_dump_start include/linux/netlink.h:245 [inline]
rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2492
___sys_sendmsg+0xf3/0x170 net/socket.c:2546
__sys_sendmsg net/socket.c:2575 [inline]
__do_sys_sendmsg net/socket.c:2584 [inline]
__se_sys_sendmsg net/socket.c:2582 [inline]
__x64_sys_sendmsg+0x132/0x220 net/socket.c:2582
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals
Kuee reported a corner case where the tnum becomes constant after the call
to __reg_bound_offset(), but the register's bounds are not, that is, its
min bounds are still not equal to the register's max bounds.
This in turn allows to leak pointers through turning a pointer register as
is into an unknown scalar via adjust_ptr_min_max_vals().
Before:
func#0 @0
0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0))
1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0))
2: (87) r3 = -r3 ; R3_w=scalar()
3: (87) r3 = -r3 ; R3_w=scalar()
4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881)
5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
6: (95) exit
from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
8: (95) exit
from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)) <--- [*]
10: (95) exit
What can be seen here is that R3=scalar(umin=32767,umax=32768,var_off=(0x7fff;
0x8000)) after the operation R3 += -32767 results in a 'malformed' constant, that
is, R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)). Intersecting with var_off has
not been done at that point via __update_reg_bounds(), which would have improved
the umax to be equal to umin.
Refactor the tnum <> min/max bounds information flow into a reg_bounds_sync()
helper and use it consistently everywhere. After the fix, bounds have been
corrected to R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) and thus the register
is regarded as a 'proper' constant scalar of 0.
After:
func#0 @0
0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0))
1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0))
2: (87) r3 = -r3 ; R3_w=scalar()
3: (87) r3 = -r3 ; R3_w=scalar()
4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881)
5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
6: (95) exit
from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
8: (95) exit
from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: atlantic: remove aq_nic_deinit() when resume
aq_nic_deinit() has been called while suspending, so we don't have to call
it again on resume.
Actually, call it again leads to another hang issue when resuming from
S3.
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992345] Call Trace:
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992346] <TASK>
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992348] aq_nic_deinit+0xb4/0xd0 [atlantic]
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992356] aq_pm_thaw+0x7f/0x100 [atlantic]
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992362] pci_pm_resume+0x5c/0x90
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992366] ? pci_pm_thaw+0x80/0x80
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992368] dpm_run_callback+0x4e/0x120
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992371] device_resume+0xad/0x200
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992373] async_resume+0x1e/0x40
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992374] async_run_entry_fn+0x33/0x120
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992377] process_one_work+0x220/0x3c0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992380] worker_thread+0x4d/0x3f0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992382] ? process_one_work+0x3c0/0x3c0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992384] kthread+0x12a/0x150
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992386] ? set_kthread_struct+0x40/0x40
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992387] ret_from_fork+0x22/0x30
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992391] </TASK>
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992392] ---[ end trace 1ec8c79604ed5e0d ]---
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992394] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992397] atlantic 0000:02:00.0: PM: failed to resume async: error -110 |
