| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27.2. Processing a 3D model may lead to unexpected app termination. |
| Out-of-bounds Write Vulnerability in JP1 Products.
This issue affects JP1/Integrated Management 3 - Manager: from 13-00 before 13-50-31; JP1/Automatic Job Management System 3 - Manager: from 13-00 before 13-50-31; JP1/Automatic Job Management System 3 - Agent: from 13-00 before 13-50-31; JP1/Automatic Job Management System 3 - Agent Minimal Edition: from 13-00 before 13-50-31; JP1/Base: from 11-00 before 12-50-54. |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, visionOS 27.2. An app may be able to cause unexpected system termination or write kernel memory. |
| OS Command Injection Vulnerability in HiRDB.
This issue affects HiRDB Server Version 10: from 10-00 before 10-12-01; HiRDB Server Version 9: from 09-00 through 09-66-22; HiRDB Server with Additional Function Version 9: from 09-00 through 09-66/V; HiRDB Server Version 9(32): from 09-02 through 09-66-22; HiRDB Server with Additional Function Version 9(32): from 09-00 through 09-66-/V. |
| This issue may allow an IPMI authenticated administrator to execute commands as the operating system root user on the BMC |
| An OS command injection vulnerability exists because of insufficient input filtering. An attacker can inject a command payload into a BMC function; the payload may execute when the related service is restarted. |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27.2. Processing a maliciously crafted font may lead to unexpected app termination or corrupt process memory. |
| An out-of-bounds write issue was addressed with improved input validation. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, tvOS 27.2, visionOS 27.2. Processing a maliciously crafted file may lead to heap corruption. |
| An OS command injection vulnerability exists in OnCell G3150A-LTE Series. When the SMS management functionality is enabled and configured, a remote attacker with the required privileges could exploit insufficient input validation in the SMS management functionality to execute arbitrary commands on the affected device. |
| Improper input validation in the Digital I/O function may allow a remote attacker with high privileges to inject operating system commands and execute them with root privileges. |
| An out-of-bounds write issue was addressed with improved input validation. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, tvOS 27.2. An app may be able to cause unexpected system termination or corrupt kernel memory. |
| An out-of-bounds write vulnerability in the CGI program of Zyxel GS1900-24E firmware versions through 2.90(AAHK.2)C0 could allow an unauthenticated adjacent attacker to exploit the flaw and potentially execute OS commands via a crafted HTTP request. |
| Mounting an attacker-controlled NAND flash image (`lx_nand_flash_open()`) triggers an unbounded out-of-bounds heap **write** in LevelX's NAND flash-translation-layer metadata parser that overwrites a driver function pointer in the control block, giving a demonstrated control-flow hijack — RIP set to a full 8-byte attacker-chosen value (register-verified). Two accompanying OOB reads. All reproduced verbatim under ASan at HEAD `9f1cfdc`. |
| Out of bounds write in Turbolev in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| A stack buffer overflow was addressed through improved input validation. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. Processing a maliciously crafted audit file may corrupt process memory. |
| Use after free in Editing in Google Chrome prior to 156.0.8078.73 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| The CC1200 sub-GHz IEEE 802.15.4 driver takes the PHY packet length from the first byte of the radio's RX FIFO in get_packet_length() and validates it in verify_rxfifo_validity() (drivers/ieee802154/ieee802154_cc1200.c). That validation only enforced a lower bound (pkt_len < 3); its second clause rejects a FIFO that holds more bytes than declared and therefore never bounds large values. Because the driver configures the radio for variable packet length with PKT_LEN = 0xFF, the length byte is an over-the-air value of 0-255 that reached net_pkt_rx_alloc_with_buffer() and the subsequent SPI burst read unclamped.
An unauthenticated attacker within radio range can transmit a frame that presents a length byte above the IEEE 802.15.4 maximum of 127 while the chip's 128-byte RX FIFO has not overflowed, so the driver's RX_FIFO_ERROR pre-check does not fire. Reaching this state depends on RF framing and timing, since the RX thread is driven off the PKT_SYNC_RXTX signal and may sample the FIFO before a packet is complete; no pairing, authentication, or user interaction is required.
With the default CONFIG_NET_BUF_FIXED_DATA_SIZE and CONFIG_NET_BUF_DATA_SIZE=128, an allocation larger than one fragment is satisfied by a chain of fragments, but read_rxfifo_content() performs a single SPI burst of pkt_len bytes into the first fragment's buf->data and then calls net_buf_add() with the same length. A length above 128 therefore writes up to 127 bytes past the end of a fragment in the contiguous rx_bufs pool and leaves a net_buf whose len exceeds its capacity. The overflowing bytes are FIFO-underflow output rather than attacker-chosen data, so the practical impact is network-buffer-pool corruption and crashes rather than a controlled write. Only builds that enable CONFIG_IEEE802154_CC1200 with an attached CC1200 radio are affected. |
| The HL7800 cellular modem driver's +CGCONTRDP: response handler on_cmd_atcmdinfo_ipaddr() in drivers/modem/vendor_standalone/hl7800.c parses the PDP-context dynamic parameters (local address, subnet mask, gateway, and DNS servers) that the cellular network assigns to the device. The response is linearized into a 256-byte stack buffer, after which each address field length is computed from comma/. delimiter positions in the network-supplied data and used directly as the length argument to strncpy() into the fixed 64-byte stack buffer temp_addr_str (and the 16-byte iface_ctx.dns_v4_string).
Because the field length is derived from attacker-controlled delimiter positions and was not bounded against the destination buffer, a single field can be far larger than 64 bytes. A malicious or impersonated cellular network (for example a rogue base station) can return a crafted +CGCONTRDP response with an overlong address field, causing strncpy() to write past temp_addr_str on the modem worker thread's stack, plus an out-of-bounds NUL write at temp_addr_str[addr_len].
No device-side privileges or user interaction are required: the device itself issues the AT+CGCONTRDP=1 query during normal network attach and parses whatever the network returns. The overflow corrupts adjacent stack memory in supervisor context, yielding at minimum a remotely triggerable crash and potentially control-flow hijacking on targets without stack protection.
The fix bounds every field length against its destination buffer (temp_addr_str and dns_v4_string) before each copy, rejecting overlong fields. |
| Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg->msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a single element actually occupies 28 bytes) passes the guard yet causes a fixed-size out-of-bounds write of up to one cmsg header (~12 bytes) past the end of the buffer.
Under CONFIG_USERSPACE the recvmsg verifier allocates a kernel-heap copy of the control buffer sized to msg_controllen and runs the implementation against it, so the overflow corrupts kernel heap memory and is triggerable from an unprivileged userspace thread; in supervisor mode it corrupts the caller's buffer.
The path is reachable on a UDP/IP socket with IP_PKTINFO/IPV6_RECVPKTINFO (or hoplimit/timestamping) enabled when the application calls recvmsg() with an undersized control buffer and a datagram is received; part of the overwritten bytes (the destination IP in ipi_addr) is influenced by the received packet.
The fix makes the capacity check use NET_CMSG_SPACE(pktinfo_len) (aligned header + aligned data) and returns -ENOMEM when the buffer is too small. Affected: v3.6.0 through v4.4.0. |
| Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS, PDU and SCD hardware. From 2.8.3 to 2.8.5, upsmon in clients/upsmon.c inserts the server-supplied ups.alarm value into shell commands executed by notify(), async_notify(), and wall(). When a monitored device reports an ALARM state and an operator has configured NOTIFYCMD with EXEC in NOTIFYFLAG ALARM, shell metacharacters in the alarm text are evaluated on POSIX or Windows and can execute arbitrary operating-system commands as the upsmon account, which is commonly root. An attacker can control the value through a malicious or compromised upsd, a man-in-the-middle on a plaintext upsd to upsmon connection, or a compromised UPS device whose driver supplies the alarm upstream of upsd; TLS between upsd and upsmon does not mitigate the compromised-device path. This vulnerability is fixed in 2.8.6. |
