Export limit exceeded: 424136 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (8861 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93084 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Drop handle on protocol bind failures The SCMI bus notifier acquires an SCMI handle when the driver core emits BUS_NOTIFY_BIND_DRIVER, before invoking the protocol driver probe callback. The protocol probe path only checks whether sdev->handle is set. If device_link_add() fails after the handle has been acquired, the protocol device can still bind with a valid handle but without the dependency link to the SCMI parent. A concurrent parent unbind can then miss the child and tear down the SCMI instance while the child still holds a handle into it. If the protocol driver probe later fails, for example with -EPROBE_DEFER, the driver core emits BUS_NOTIFY_DRIVER_NOT_BOUND rather than BUS_NOTIFY_UNBOUND_DRIVER. The SCMI notifier only released the handle on BUS_NOTIFY_UNBOUND_DRIVER, so each failed protocol-device bind leaked the SCMI instance users refcount and left sdev->handle set after the failed probe. Make the link helper report failure and drop the acquired handle if the link cannot be created. Also handle BUS_NOTIFY_DRIVER_NOT_BOUND in the same cleanup path used for unbind so failed probes balance the earlier BUS_NOTIFY_BIND_DRIVER acquisition. | ||||
| CVE-2026-92488 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: complete object teardown when the destroy command fails erdma_destroy_qp(), erdma_destroy_cq(), erdma_dereg_mr(), and erdma_destroy_ah() returned early when erdma_post_cmd_wait() failed, leaking the queue buffers, MTTs, doorbells and the STAG, QPN, CQN and AHN identifiers. A command timeout clears ERDMA_CMDQ_STATE_OK_BIT and permanently disables the command queue, so no retry can succeed; the RDMA core keeps the object after a failed destructor and forced uverbs cleanup then nulls the pointers, making the resources unreachable. Warn on failure but release every software-owned resource and return success, since during terminal destruction the hardware command result is only diagnostic. | ||||
| CVE-2026-90417 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Fix dereg_skb leak and double free in write_tpt_entry() When the device is in the fatal error state, write_tpt_entry() returns -EIO before handing the caller's preallocated skb to the transmit path; its allocation-failure returns do the same. c4iw_dereg_mr() ignores the error and frees mhp, leaking mhp->dereg_skb. c4iw_get_dma_mr() instead frees the skb a second time after dereg_mem() already consumed it, a double free. Make write_tpt_entry() the sole owner of a non-NULL skb, freeing it on every return preceding handoff to c4iw_ofld_send(): fatal error, tpt and stag allocation failure. c4iw_ofld_send() consumes the skb on success and error alike, so drop the redundant kfree_skb() in c4iw_get_dma_mr() after dereg_mem(). | ||||
| CVE-2026-90346 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: clean up color-change beacon data on errors nl80211_color_change() calls nl80211_parse_beacon() for the beacon_next template, which can allocate params.beacon_next.mbssid_ies and .rnr_ies. A parsing failure returned directly instead of using the out: cleanup, leaking any allocations completed before the error. Allocate the nested attribute table before parsing beacon_next. Its allocation failure can then return before beacon data exists, while a later parsing failure uses out: to release the parsed data. | ||||
| CVE-2026-90247 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix mmap_lock leak in irq_work path stack_map_get_build_id_offset() introduced a per-CPU irq_work to defer mmap_read_unlock() from NMI context, and bpf_find_vma() later reused the same mmap_unlock_work. Both callers only check whether the work is busy before taking mmap_lock, so a nested caller can reuse the slot before the first caller queues it. Two read locks may then be acquired while only one deferred unlock runs, leaking a read lock and blocking exit_mmap(). Reserve the per-CPU slot before mmap_read_trylock(). Use the same wrapper in stackmap and bpf_find_vma() so both callers release the reservation on trylock failure. Keep rejecting the slot while the irq_work remains busy. Release it after the irq_work callback unlocks the mm. | ||||
| CVE-2026-90213 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix memory leak in error path of build_tree() In the error path of build_tree(), node instances can remain in the local linked list when the function returns. Whenever an invalid value is detected in the self ID sequence, each allocated node instance is either an entry in the linked list or an entry in the ports array of its parent node. Therefore, the allocate node instances can be safely released by traversing the linked list from its head. Release the remaining node instances with for_each_fw_node() before returning to the caller. | ||||
| CVE-2026-90187 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: null_blk: free zones array on device power-off null_init_zoned_dev() allocates dev->zones when a zoned device is powered on, but null_del_dev() never frees it on power-off; dev->zones is only freed later in null_free_dev(), when the configfs directory is removed. If the device is powered off and then on again, null_init_zoned_dev() allocates a new array and overwrites the dev->zones pointer, leaking the previous allocation each power cycle. Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it. And calling null_free_zoned_dev() in null_free_dev() is no longer necessary because every caller already invokes null_del_dev() first: via nullb_group_drop_item() before nullb_device_release(), in the null_add_dev() error path of null_create_dev(), and in null_destroy_dev(). Remove the redundant call. And take &lock around zone_cond_store() in the two store wrappers to serialize dev->zones check-and-deref against its alloc/free, which already run under &lock. The reason there was no problem before is that only nullb_device_release() or null_exit() frees the dev->zones, which guarantees that subsequent users won't access the configfs interface. | ||||
| CVE-2026-90169 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: free preauth sessions on connection teardown SMB3.1.1 multichannel binding preserves the preauthentication hash in a preauth_session between the NTLM negotiate and authenticate requests. The binding NTLM negotiate allocates this object and returns STATUS_MORE_PROCESSING_REQUIRED. If the client disconnects before it sends the authenticate request, neither the authenticate nor error cleanup paths free the object. Release any remaining preauthentication sessions when tearing down the connection. Initialize the list when allocating the connection so that this cleanup is safe regardless of the negotiated dialect. | ||||
| CVE-2026-90138 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO because it loops back to r0 while the socket is still in the TCP_SYN_SENT state, causing it to be incorrectly dispatched to the connecting-client path. The unexpected packet type encountered there sets sk_err to EPROTO. After that, it invokes a listen() call on the same socket. This listen() call succeeds because the kernel's listening path never inspects or clears sk_err. Then, a new socket (r1) is created as a normal client and connects to r0. However, vsock_accept() rejects this incoming connection because the listener's sk_err still holds the EPROTO error from the earlier failed self-connect. This rejection causes the child socket created for r1's connection to never be freed on virtio or hyperv transports; only the VMCI transport implements pending_work to revisit and clean up a rejected socket. For a non-blocking connect(), vsock_connect() may return -EINPROGRESS immediately, and vsock_connect_timeout() can later set sk->sk_err asynchronously. Since no vsock transport ever sets sk_err on a socket while it is in TCP_LISTEN state, checking it in vsock_accept() serves no purpose and only carries forward errors left behind by earlier, unrelated connection attempts on the same socket. Remove the checks so accept() no longer rejects valid incoming connections because of a stale error, which also avoids the resource leak described above. | ||||
| CVE-2026-90125 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix request buffer leak in smb2_new_read_req() smb2_new_read_req() allocates the request buffer with smb2_plain_req_init() but only publishes it to the caller with *buf = req at the very end of the function. Two error returns sit in between: rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server, (void **) &req, total_len); if (rc) return rc; if (server == NULL) return -ECONNABORTED; [...] rdata->mr = smbd_register_mr(server->smbd_conn, &rdata->subreq.io_iter, true, need_invalidate); if (!rdata->mr) return -EAGAIN; On either of them the buffer is neither released nor handed back, so it is leaked. The caller cannot clean up after it: smb2_async_readv() does 'goto out' on a non-zero return, which skips the cifs_small_buf_release(buf) at async_readv_out, and buf has not been assigned at that point in any case. The write path has never had this problem. smb2_async_writev() registers the memory region inline and jumps to its release label instead of returning: wdata->mr = smbd_register_mr(...); if (!wdata->mr) { rc = -EAGAIN; goto async_writev_out; } Commit b7972092199f ("cifs: smbd: Retry on memory registration failure") changed both sides from -ENOBUFS to -EAGAIN in a single patch, which puts the two shapes next to each other. Only the -EAGAIN return is reachable in practice, because smb2_plain_req_init() calls smb2_reconnect() first and that already fails with -EIO when server is NULL, before anything is allocated. Both returns are given the same treatment here rather than leaving one of them correct only by accident. Because -EAGAIN is a replayable error, the failure also reaches the retry block at the end of smb2_async_readv(), which marks the subrequest NETFS_SREQ_NEED_RETRY, so a failing registration can be retried rather than ending the I/O, and every attempt that reaches it leaks another buffer. smb2_should_replay() short-circuits on tcon->retry, so on a hard mount the attempt count is not bounded by the retrans setting. Only the asynchronous read path is affected. The synchronous SMB2_read() caller passes rdata == NULL and the memory registration block is guarded on rdata. The memory registration failure path was pointed out by the Sashiko AI reviewer while it was reviewing an unrelated patch to smb2_async_readv(). | ||||
| CVE-2026-90099 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: account classifier filter allocations to memcg Allocations in the tc classifier *_change() paths (filter objects, per-CPU counters, and per-filter aux data) use plain GFP_KERNEL without __GFP_ACCOUNT, allowing unprivileged users to pin kernel memory outside memcg charging. The shared tcf_exts_init_ex() action array allocation in cls_api.c was also uncharged; this patch closes it along with the per-classifier filter-object/percpu/aux allocations that remain unaccounted. Add GFP_KERNEL_ACCOUNT to: - the shared tcf_exts_init_ex() action array (cls_api.c), common to every filter of every classifier (32 pointers, 256 bytes); - the filter-object, per-CPU-counter, and per-filter aux allocations in cls_basic, cls_bpf, cls_cgroup, cls_flow, cls_flower, cls_fw, cls_matchall, cls_route and cls_u32; - the u32_init_knode() replace-path knode allocation (cls_u32.c), which allocates the same struct tc_u_knode + sel.keys on every replace of an existing knode and was missed by the create-path-only conversion. Also fix the cls_basic error path: basic_change() inserts fnew into the IDR before allocating the per-CPU counter. If alloc_percpu() fails the errout path kfree'd fnew without idr_remove, leaving a dangling pointer in the IDR. With GFP_KERNEL_ACCOUNT the percpu alloc becomes failable on demand (memcg at memory.max), making the dead path attacker-reachable and burning the handle permanently. Add the idr_remove on the percpu failure path, matching the basic_set_parms failure-path pattern. Note: vega@nebusec.ai provided a poc for basic_cls, but it was easy to extend to the other classifiers. Conditions to recreate the bug: - CONFIG_NET_SCHED, CONFIG_NET_CLS_* (the classifier being used), CONFIG_NET_CLS_ACT, CONFIG_MEMCG, CONFIG_USER_NS, CONFIG_NET_NS. - Unprivileged user in a fresh user+network namespace (unshare -Urn), or root with CAP_NET_ADMIN. - Create a large number of tc filters (e.g. tc filter add dev lo ingress ... <classifier> ...) while watching a memcg-limited cgroup: system slab grows far faster than memory.current, pinning kernel memory outside memcg charging. | ||||
| CVE-2026-89934 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: ltrf216a: fix runtime PM reference leak in error path ltrf216a_get_lux() acquires a runtime PM reference by calling ltrf216a_set_power_state(data, true). However, if ltrf216a_read_data() fails, the function returns immediately without dropping the reference. This leaves the runtime PM usage count unbalanced, preventing the device from autosuspending after a failed read. Fix this by releasing the runtime PM reference before returning from the error path. | ||||
| CVE-2026-89813 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: force complete the KIQ ring fences on reset Like the MES scheduler ring, the KIQ ring sets no_scheduler = true and uses a polling fence, so it is skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). Its hw fence value lives in wb (GTT) memory and survives a MODE1 reset while fence_drv.sync_seq keeps advancing, so after a reset the first KIQ submission can poll forever on a seq that is never written back. Force complete the KIQ ring fences too so their hw fence is realigned to sync_seq. | ||||
| CVE-2026-80866 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: avoid busy looping in tipc_exit_net() Blamed commit introduced a busy-wait loop in tipc_exit_net() to wait for pending UDP bearer cleanup works to complete: while (atomic_read(&tn->wq_count)) cond_resched(); This loop can busy-wait for a long time if cond_resched() is a NOP. This typically happens if the netns exit is executed by a high priority task, or under kernels configured without preemption (CONFIG_PREEMPT_NONE). In such cases, it wastes CPU cycles and can lead to soft lockups. Fix this by replacing the busy loop with wait_var_event(), allowing the thread to sleep properly until the work queue count reaches zero. Accordingly, update cleanup_bearer() to use atomic_dec_and_test() and wake_up_var() to wake up the waiter when the count drops to zero. This uses the global wait queue hash table, avoiding the need to bloat struct tipc_net with a wait_queue_head_t. The atomic_dec_and_test() provides the necessary memory barrier to ensure the wakeup is not missed. | ||||
| CVE-2026-80856 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse: fix invalidate lock leak on setattr writeback failure fuse_do_setattr() takes filemap_invalidate_lock() for a DAX truncate (fault_blocked = true) and releases it at the out:/error: labels. But when a writeback flush is also needed, a write_inode_now() failure returns directly and leaks the lock, so any later fault or truncate on the file stalls on the stale rwsem. For example, truncate(2) on a setuid file reaches fuse_do_setattr() with both ATTR_SIZE and ATTR_MODE set: truncate(2) └─ do_truncate() ├─ dentry_needs_remove_privs() # S_ISUID └─ notify_change() # KILL_SUID -> ATTR_MODE └─ fuse_setattr() # no killpriv: │ # ia_valid |= ATTR_MODE └─ fuse_do_setattr() ├─ filemap_invalidate_lock() # IS_DAX && is_truncate └─ write_inode_now() # is_wb && ATTR_MODE └─ if (err) # e.g. daemon -> -EIO return err # <- lock leaked Fix this by adding an unlock label that releases the lock before returning the error, and use it for the fuse_dax_break_layouts() failure path as well. | ||||
| CVE-2026-74397 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix transport-domain rollback and initialize lb mutex earlier mlx5_ib_alloc_transport_domain() allocates a transport domain and then may fail in mlx5_ib_enable_lb(). In that case, the allocated TD is leaked. Fix this by deallocating the TD when mlx5_ib_enable_lb() returns an error. Also return 0 explicitly in the no-loopback-capability success branch, and move dev->lb.mutex initialization to mlx5_ib_stage_init_init(). | ||||
| CVE-2026-64463 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpci_rt1711h: unregister TCPCI port with devres rt1711h_probe() registers the TCPCI port before requesting the interrupt and enabling alert interrupts. If either of those later steps fails, the probe function returns without unregistering the TCPCI port. The explicit unregister currently only happens from the remove callback. Register a devres action immediately after tcpci_register_port() succeeds, so tcpci_unregister_port() runs on later probe failures and on driver detach. Drop the remove callback to avoid unregistering the same port twice. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-63974 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close Since hci_dev_close_sync() can now be called during the reset path, we should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts while the hdev workqueue is being drained. | ||||
| CVE-2026-53229 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame() returns false (e.g. XDPSQ is full), the function returns without unmapping the DMA address or freeing the xdp_frame allocated by xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on success, so the completion path cannot recover these entries. With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind: DMA-API: pci 0000:08:00.0: device driver has pending DMA allocations while released from device [count=1116] One of leaked entries details: [device address=0x000000010ffd7028] [size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy] WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180 ... DMA-API: Mapped at: debug_dma_map_phys+0x4b/0xd0 dma_map_phys+0xfd/0x2d0 mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core] mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core] mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core] Add the missing unmap + xdp_return_frame, matching the cleanup already done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch, so no per-frag unmap is needed. | ||||
| CVE-2026-45859 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: do shared-unconfirmed check before segmentation Ulrich reports a regression with nfqueue: If an application did not set the 'F_GSO' capability flag and a gso packet with an unconfirmed nf_conn entry is received all packets are now dropped instead of queued, because the check happens after skb_gso_segment(). In that case, we did have exclusive ownership of the skb and its associated conntrack entry. The elevated use count is due to skb_clone happening via skb_gso_segment(). Move the check so that its peformed vs. the aggregated packet. Then, annotate the individual segments except the first one so we can do a 2nd check at reinject time. For the normal case, where userspace does in-order reinjects, this avoids packet drops: first reinjected segment continues traversal and confirms entry, remaining segments observe the confirmed entry. While at it, simplify nf_ct_drop_unconfirmed(): We only care about unconfirmed entries with a refcnt > 1, there is no need to special-case dying entries. This only happens with UDP. With TCP, the only unconfirmed packet will be the TCP SYN, those aren't aggregated by GRO. Next patch adds a udpgro test case to cover this scenario. | ||||