| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
parport: Fix race between port and client registration
The parport subsystem registers port devices before they are fully
initialised, resulting in a race condition where client drivers such
as lp can attach to ports that are not completely initialised or even
being torn down.
When the port and client drivers are built as modules and loaded
around the same time during boot, this occasionally results in a
crash. I was able to make this happen reliably in a VM with a
PC-style parallel port by patching parport_pc to fail probing:
> --- a/drivers/parport/parport_pc.c
> +++ b/drivers/parport/parport_pc.c
> @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base,
> if (!p)
> goto out3;
>
> - base_res = request_region(base, 3, p->name);
> + base_res = NULL;
> if (!base_res)
> goto out4;
>
and then running:
while true; do
modprobe lp & modprobe parport_pc
wait
rmmod lp parport_pc
done
for a few seconds.
In the long term I think port registration should be changed to put
the call to device_add() inside parport_announce_port(), but since the
latter currently cannot fail this will require changing all port
drivers.
For now, add a flag to indicate whether a port has been "announced"
and only try to attach client drivers to ports when the flag is set. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync
hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing
both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was
obtained from an RCU-protected iteration over hdev->conn_hash.list and
is not valid once these locks are dropped. A concurrent disconnect can
free the hci_conn between the unlock and the dereference, causing a
use-after-free read.
The cancellation mechanism in hci_conn_del() cannot prevent this because
hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL:
hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL);
While hci_conn_del() dequeues with data=conn:
hci_cmd_sync_dequeue(hdev, NULL, conn, NULL);
Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never
matches, and the pending work item is not cancelled.
Fix this by saving conn->conn_timeout into a local variable while the
locks are still held, so the stale conn pointer is never dereferenced
after unlock.
This is the same class of bug as the one fixed by commit 035c25007c9e
("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which
addressed the identical pattern in a different function.
This vulnerability was identified using 0sec.ai, an open-source
automated security auditing platform (https://github.com/0sec-labs). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
iso_sock_close() calls iso_sock_clear_timer() before acquiring
lock_sock(sk).
iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the
socket lock held:
if (!iso_pi(sk)->conn)
return;
cancel_delayed_work(&iso_pi(sk)->conn->timeout_work);
Concurrently, iso_conn_del() executes under lock_sock(sk) and calls
iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in
the final reference to the connection being dropped:
CPU0 CPU1
---- ----
iso_sock_clear_timer()
if (conn != NULL) ... lock_sock(sk)
iso_chan_del()
iso_pi(sk)->conn = NULL
cancel_delayed_work(conn) /* NULL deref or UAF */
iso_pi(sk)->conn is not stable across the unlock window, causing a
NULL pointer dereference or use-after-free.
Serialize iso_sock_clear_timer() with the socket lock by moving it
inside lock_sock()/release_sock(), matching the pattern used in
iso_conn_del() and all other call sites. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: imx: Use devm_pm_runtime_enable()
sashiko complained about early usage of the device while probe isn't
completed. This can be mitigated by delaying the pm_runtime_enable()
into the removal path instead doing it early. This ensures that in an
error case the device is removed (and imx_mu_shutdown()) before
pm_runtime_disable() so we don't have to do this manually.
For the order to work, lets move devm_mbox_controller_register() until
after the pm-runtime part. So the reverse order will be mbox-controller
removal followed by disabling pm runtime.
Use devm_pm_runtime_enable(), remove manual pm_runtime_disable()
invocations and move the pm_runtime handling in probe before
devm_mbox_controller_register(). |
| RabbitMQ is a messaging and streaming broker. Prior to 4.1.11 and 4.2.6 on Windows, the RabbitMQ management plugin static file handler rabbit_mgmt_wm_static can pass URL-encoded backslashes to erl_prim_loader:read_file_info before path validation when multiple management extension plugins are enabled, causing outbound DNS and SMB requests to attacker-controlled UNC paths. This issue is fixed in versions 4.1.11 and 4.2.6. |
| A Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
As part of the stateful traffic processing on SRX Series devices flows are being established, and removed when not needed anymore. During the removal process the timeout of a flow should be set to 3 seconds and consequentially the flow should be removed shortly after. Due to a race condition occurring when setting the timeout there is a chance (the exact conditions are outside the attackers control) that the timeout is instead set to a very high value of larger than 10,000 seconds:
user@host> show security flow session | match timeout
Session ID: 98784248524, Policy name: PROD-FLOW/4, HA State: Active, Timeout: 85250, Session State: Valid
This will lead to an accumulation of flows which can be observed by an ever-increasing value of invalidated sessions in the output of 'show security flow session summary':
user@host> show security flow session summary | match invalid
Invalidated sessions: 216931These sessions can't be cleared manually with the 'clear security flow session' command, which will either lead to forwarding to stop (and the system needs to be manually recovered with a reboot) or to a flowd core and automatic reboot.
This issue affects Junos OS on SRX Series:
* 24.2 versions before 24.2R2-S3,
* 24.4 versions before 24.4R2-S1, 24.4R2-S2,
* 25.2 versions before 25.2R1-S2, 25.2R2.
This issue does not affect releases earlier than 24.2R1; |
| Heap-based buffer overflow in OpenSSH for Windows allows an authorized attacker to elevate privileges locally. |
| Time-of-check time-of-use (toctou) race condition in Windows BitLocker allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Storage allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Print Spooler Components allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Microsoft Account allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Storage allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: mark the rcu locked areas properly
When we bump the uref counter, there's no need to keep
the rcu lock because the referred hash table can't
disappear. Also, from the same reason in mtype_gc we
need the rcu lock and not a spinlock. |
| Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the screenshot/print proxy (/proxy?data=…) maintains a package-level assets map[string]MessageAssets cache, but reads the map without holding assetsMutex while a long-running cleanup goroutine and (re-entrant) CSS-rewriting code path concurrently write to it under the lock. When the unsynchronized read coincides with a synchronized write, Go's runtime raises fatal error: concurrent map read and map write — a runtime.throw that is not recoverable by http.Server's handler-panic recover. The whole Mailpit process exits, taking the SMTP, POP3 and HTTP listeners down with it. Version 1.30.0 contains a patch. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix huge_zero_pfn race
Patch series "mm/huge_memory: fix huge_zero_pfn race", v2.
There is a subtle race in the reference-counted huge_zero_folio
implementation.
The fast path atomic logic fails to account for the fact that the shrinker
(which drops the final huge_zero_refcount pin) can overwrite huge_zero_pfn
with the ~0UL sentinel value in shrink_huge_zero_folio_scan() after a
racing get_huge_zero_folio() installed a valid value there.
This results in huge_zero_folio being correctly set but huge_zero_pfn
being set incorrectly and thus is_huge_zero_pfn() and consequently
is_huge_zero_pmd() will misidentify the huge zero folio as being an
ordinary THP folio.
This can result in the huge zero folio being split and otherwise treated
incorrectly.
The solution to this is very subtle as there is an atomic fast path, and
thus ordering in weakly ordered architectures has to be treated very
carefully.
The first commit fixes the issue by introducing a spinlock around
huge_zero_[pfn, folio, refcount] write, with careful consideration paid to
load/store ordering in the fast path. It is placed first and kept as
small as possible so that it can be backported on its own.
The second commit is a pure cleanup which reworks the
CONFIG_PERSISTENT_HUGE_ZERO_FOLIO logic to better separate the persistent
logic from the dynamically allocated one.
This patch (of 2):
If !CONFIG_PERSISTENT_HUGE_ZERO_FOLIO, the huge_zero_folio is refcounted
by huge_zero_refcount and returned by mm_get_huge_zero_folio().
When the caller is done with the huge zero page, its reference count is
decremented. Only a shrinker can set the reference count to zero.
A race can unfortunately occur between a shrinker decrementing the
reference count to zero and a concurrent page fault.
This is because shrink_huge_zero_folio_scan() might, if very unlucky, be
preempted between setting huge_zero_refcount to zero and writing an
invalid value.
During this time get_huge_zero_folio() could write to huge_zero_pfn before
shrink_huge_zero_folio_scan() resumes.
In this event the huge zero folio will be persistently misidentified
causing the THP code path to be entered inappropriately for the huge zero
folio:
CPU 0 CPU 1
=======================================|=================================
shrink_huge_zero_folio_scan() |
atomic_cmpxchg() sets refcount to 0 |
xchg() sets huge_zero_folio to NULL | get_huge_zero_folio()
| | atomic_inc_not_zero() -> zero
preempted for a long time | Allocate new huge zero folio
| | Write valid huge_zero_folio
v | Write valid huge_zero_pfn
Overwrite huge_zero_pfn with ~0UL <--- Invalid overwrite!
This results in is_huge_zero_pfn() and is_huge_zero_pmd() incorrectly
returning false for a huge zero page which could result in issues like the
huge zero folio being incorrectly split.
Note that the issue is with huge_zero_pfn not huge_zero_folio, as
get_huge_zero_folio() uses cmpxchg() gated on huge_zero_folio being NULL
with a retry loop and shrink_huge_zero_folio_scan() uses xchg() to set
huge_zero_folio.
Fix the issue by introducing a spinlock, huge_zero_lock, to prevent
concurrent write of huge_zero_folio, huge_zero_pfn and huge_zero_refcount.
There needs to be significant care taken here to ensure correctness:
The fast path in get_huge_zero_folio() uses atomic_inc_not_zero(), which
is outside of the critical section, and means huge zero allocation is
gated on zero huge_zero_refcount.
The fast path doesn't use huge_zero_lock, so the critical section is
irrelevant to it.
So invariants are required - huge_zero_refcount MUST:
* Only be set in the huge_zero_lock critical section to ensure
serialisation of huge_zero_pfn, huge_zero_folio and
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Wait for SCX_OPSS_DISPATCHING before reenqueueing a task
ebf1ccff79c4 ("sched_ext: Fix ops.dequeue() semantics") moved the final
ops_state store in scx_dispatch_enqueue() after the DSQ unlock so that the
custody update and ops.dequeue() precede it. A task can thus be found on a
DSQ while still SCX_OPSS_DISPATCHING.
The dequeue and core-sched pick paths wait for the state to clear in
ops_dequeue() but the reenqueue paths don't. A reenqueue in that window runs
ops.enqueue() and sets SCX_OPSS_QUEUED before the dispatch has completed.
The dispatcher's final store then overwrites it with SCX_OPSS_NONE and
finish_dispatch() drops every later dispatch of the task.
Wait for SCX_OPSS_DISPATCHING to clear before dequeueing a task for
reenqueue, the same way ops_dequeue() does. |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Serialize IMSIC attributes with vCPU migration
KVM device ioctls are not serialized against KVM_RUN. As a result,
kvm_riscv_aia_imsic_rw_attr() can snapshot the physical CPU and HGEI of
an IMSIC VS-file before a concurrent vCPU migration releases it.
The HGEI can then be allocated to another vCPU before imsic_vsfile_rw()
uses the stale tuple. A GET or SET attribute may consequently access the
new owner's interrupt file.
Serialize the entire IMSIC attribute operation with the target vCPU
mutex. This prevents the VS-file from being migrated and recycled until
the attribute access completes. Acquire the mutex killably so that the
device ioctl remains interruptible while waiting for KVM_RUN to finish. |
| Race in Chrome for iOS in Google Chrome on iOS prior to 151.0.7922.72 allowed a remote attacker to inject arbitrary scripts or HTML (UXSS) via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: generalize pending status bit
Rename NF_FLOW_HW_PENDING to NF_FLOW_PENDING and use it to inhibit the
flowtable GC worker until pending hw offload work has been completed.
Apparently, nf_flow_offload_stats() can schedule work to retrieve stats
while the flow is being removed by GC.
And this bit can also be used in a follow up patch to disable GC until
the flow has been fully added in both directions.
Revert the reordering done in commit d644b23afe1e ("netfilter:
flowtable: publish HW_DEAD after worker is done") to prevent a race
between GC and hw offload handler. |
| The kernel helper z_waitq_head() (kernel/include/wait_q.h) reads the head of a thread wait queue, but on SMP systems it was called from several places without holding the scheduler spinlock _sched_spinlock that serializes wait-queue mutation. The consequential call site is z_timer_expiration_handler() in kernel/timer.c, which held only the timer subsystem lock timer_lock while reading timer->wait_q and then unpending, setting the return value of, and readying the thread it obtained. halt_thread() in kernel/sched.c removes an aborted thread from its wait queue while holding only _sched_spinlock, so the two paths are not mutually exclusive.
When the last waiter is removed on another CPU inside that window, sys_dlist_peek_head() can return the list sentinel — a pointer into the k_timer object itself — typed as a struct k_thread * (with CONFIG_WAITQ_SCALABLE, rb_get_min() can return an arbitrary node of a tree being restructured), or it can return a pointer to a thread that has already been unpended and, for dynamically allocated threads, freed. The handler then calls unpend_thread_no_timeout(), which performs a sys_dlist_remove() through pointers read from that object, and arch_thread_return_value_set(), which writes unconditionally through the pointer.
The result is out-of-bounds and use-after-free writes in supervisor context, plus scheduler state corruption; a milder outcome is a thread that has re-pended elsewhere being woken with a success return value from an unrelated blocking call. All of the primitives needed to drive the interleaving — k_timer_start(), k_timer_status_sync(), k_thread_create() and k_thread_abort() — are system calls, so with CONFIG_USERSPACE enabled an unprivileged user-mode thread can attempt the race against kernel-owned data.
Exploitation requires a multi-CPU build (CONFIG_MP_MAX_NUM_CPUS greater than one; the affected region is a no-op on uniprocessor targets), local code execution, and winning a narrow timing window, so the practical outcome is most often a kernel crash rather than controlled corruption. The fix splits the helper into z_waitq_head_locked() for callers that already hold the scheduler spinlock and a z_waitq_head() that acquires it, and brings the timer expiration handler's head read, unpend and ready under a single LOCK_SCHED_SPINLOCK region. |
