| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in HPE Networking EdgeConnect SD-WAN Gateways could allow an unauthenticated remote attacker to cause a denial-of-service against certain services running on impacted Gateways. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions prior to 3.2.10, 3.3.12, and 3.4.13 contain an infinite-loop vulnerability in SampleCountChannel. The helper roundListSizeUp() rounds a sample-list size up to the next power of two using repeated unsigned left shifts, which terminates for normal values but fails for UINT_MAX: the sequence reaches 0x80000000, and the next left shift wraps the 32-bit value to 0. Because 0 remains less than UINT_MAX, the loop never progresses and never exits. The bug is reachable through public OpenEXRUtil APIs, either by editing the sample-count buffer through SampleCountChannel::Edit (whose destructor calls endEdit()) or by calling SampleCountChannel::set(x, y, UINT_MAX) on a valid pixel. This issue has been fixed in versions 3.2.10, 3.3.12, and 3.4.13. |
| The divi-dash WordPress plugin before 1.0.7 does not validate the source of the client IP address it uses for rate limiting and banning, allowing unauthenticated attackers to spoof arbitrary IP addresses in order to bypass rate limiting, ban chosen addresses from the feature, and grow a stored option without bound, resulting in denial of service. |
| An issue in EGO-Planner-v2 All versions up to commit 5c99a95880401e2599638d567abc0e240396cb42 allows an attacker to cause a denial of service via the checkCollisionCallback, execFSMCallback, planFromGlobalTraj in ego_replan_fsm.cpp |
| An issue in ZJU-FAST-Lab EGO-Planner-v2 All versions up to commit 5c99a95880401e2599638d567abc0e240396cb42 allows an attacker to cause a denial of service via the EGOReplanFSM component |
| Vulnerability in the Oracle Net Services component of Oracle Database Server. Supported versions that are affected are 19.3-19.32, 21.3-21.23 and 23.4.0-23.26.3. Easily exploitable vulnerability allows unauthenticated attacker with network access via Oracle Net to compromise Oracle Net Services. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Net Services. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| plone.app.dexterity is a content-type system for the Plone content management system, and plone.app.contenttypes provides Plone’s Dexterity-based content types. Plone.app.dexterity versions through 3.2.2, 4.0.0 through 4.1.2, and 5.0.0, and plone.app.contenttypes versions through 3.0.11, 4.0.0 through 4.0.9, and 5.0.0 are vulnerable to denial of service because an authenticated user can create content with excessively long titles, descriptions, or uploaded-file names, causing Plone to become unresponsive and potentially making the resulting content difficult to edit or delete. The vulnerability is patched in plone.app.dexterity versions 3.2.3, 4.1.3, and 5.0.1, and in plone.app.contenttypes versions 3.0.12, 4.0.10, and 5.0.1. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's Apple Preferred Executable Format loader was vulnerable because the PEF loader accepted relocSecCount values that were not bounded by the number of sections or complete relocation records in the input. The vulnerability is triggered by normal binary-format auto-detection of a small crafted Apple PEF file. The loader could perform up to 268,435,456 relocation-section iterations and repeated buffer operations after record offsets passed the end of the file. This can cause denial of service through excessive CPU consumption and prolonged processing. This issue is fixed in version 6.2.0. |
| Uncontrolled Resource Consumption (CWE-400 / CWE-1333) in regex search query predicates (such as RegexProjectPredicate, RegexRefPredicate, RegexPathPredicate, and sibling predicates) and REST regex filter endpoints (RegexListSearcher /projects/?r= and RefFilter /projects/{project}/branches/?r=) in Gerrit Code Review versions 2.1.6 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an unauthenticated remote attacker (or an authenticated user if anonymous read access is disabled) to cause a denial of service (CPU starvation and JVM heap exhaustion / OutOfMemoryError) via crafted search queries or REST API requests containing regular expressions with large counted repetitions or exponential DFA determinization patterns. Because the user-supplied regular expression is compiled into an unbounded dk.brics.automaton instance (new RegExp(re).toAutomaton()) on the request thread prior to index evaluation or access control visibility filtering, trivial queries can exhaust JVM heap or pin request threads regardless of heap size. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. |
| Uncontrolled Resource Consumption (CWE-400 / CWE-407) in the ANTLR 3 search query parser (QueryParser / Query.g) in Gerrit Code Review versions 2.0.19 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an unauthenticated remote attacker (or an authenticated user if anonymous read access is disabled) to cause a persistent denial of service (CPU exhaustion and HTTP worker thread pool starvation requiring a server restart) via crafted search queries containing deeply nested parentheses sent to query evaluation endpoints (/changes/?q=, /accounts/?q=, /groups/?query=, /projects/?query=, /Documentation/?q=, /changes/{id}/query?expression=, or SSH gerrit query). Because syntactic predicates in conditionOr and conditionAnd recurse via conditionBase without memoization prior to capability or visibility checks and worker threads do not abort when the client disconnects, a small number of requests (such as 25 requests matching default httpd.maxThreads) can permanently pin all HTTP worker threads. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. |
| containerd is an open-source container runtime. Prior to 1.7.35, 2.0.12, 2.2.8, and 2.3.5, containerd on Linux with the CRI plugin enabled can indefinitely block the drainExecSyncIO goroutine in internal/cri/server/container_execsync.go when CRI ExecSync is used by exec probes or lifecycle hooks that launch long-lived background child processes retaining standard input and output pipes. The input and output drain phase has no default timeout and did not stop when the request context was canceled, so repeated ExecSync invocations can accumulate blocked goroutines and host memory. The resulting resource exhaustion can cause the OOM killer to terminate containerd, leaving the container runtime unavailable until restart. Deployments not using containerd's CRI implementation and containers not running on Linux are not affected. This issue is fixed in versions 1.7.35, 2.0.12, 2.2.8, and 2.3.5. |
| When Neethi fetches a remote policy reference, it only limits the time per read, not the whole transfer, so a server that trickles bytes slowly can keep the fetch alive indefinitely and tie up the calling thread (denial of service).
Users are recommended to upgrade to version 3.2.4, which fixes this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: do not use make_bad_inode() in ocfs2_read_inode_block_full()
This reverts commit 58b6fcd2ab34 ("ocfs2: mark inode bad upon validation
failure during read").
Since 'make_bad_inode()' resets inode type to S_IFREG, doing this for
directory inode during active VFS lookup is likely to confuse the latter,
including VFS_BUG_ON_INODE() triggered in this case. |
| Docmost is open-source collaborative wiki and documentation software. From 0.21.0 until 0.95.0, any authenticated workspace member with edit rights to a space can upload an archive to the page-import feature whose ZIP extraction routine does not limit total uncompressed size, per-entry size, or entry count. The extractor writes entries to the server temp directory and automatically extracts one nested ZIP, allowing an outer upload within the default 200 MB limit to expand by multiple GB. The resulting disk exhaustion can crash the import worker and degrade or take down the instance for all tenants. This issue is fixed in version 0.95.0. |
| libp2p is a JavaScript implementation of the libp2p networking stack. Prior to 11.0.26, @libp2p/floodsub accepts unauthenticated RPC frames on /floodsub/1.0.0 through PeerStreams.attachInboundStream in packages/floodsub/src/peer-streams.ts without protobuf element limits, then processRpc and processRpcSubOpt in packages/floodsub/src/floodsub.ts synchronously process the subscriptions array without a per-frame cap. A single bounded-size frame can decode into millions of empty subscription entries that block the event loop, while hundreds of thousands of unique-topic SUBSCRIBE entries allocate PeerSet objects in this.topics that are not removed after peer removal or stop. Empty entries cause CPU exhaustion but do not grow this.topics; persistent memory growth requires unique topics. The subscription path bypasses message signature validation and the message-only processing queue, allowing a remote peer to cause sustained CPU denial of service, memory exhaustion, out-of-memory termination, and node unavailability. The issue is fixed in version 11.0.26. |
| MKP is a Model Context Protocol server for Kubernetes. Prior to 0.4.1, cmd/server/main.go exposes the default HTTP endpoint and pkg/mcp/server.go registers the unauthenticated get_resource tool, which accepts attacker-controlled limitBytes and tailLines values for the pods logs subresource. buildPodLogOpts() in pkg/k8s/subresource.go parses those values as unbounded int64 parameters, and defaultGetPodLogs() copies the returned Kubernetes log stream through io.Copy into an in-memory bytes.Buffer without an application-side cap. A remote attacker who can reach the default port 8080 MCP endpoint and select a pod with sufficiently large accumulated logs can send one tools/call request that causes large allocations and additional response copies, while the request-frequency limiter does not constrain per-request volume. This can exhaust process memory, terminate the MKP server, and deny the MCP service; observed testing showed more than one GiB of RSS growth while handling a 128 MiB requested stream. This issue is fixed in version 0.4.1. |
| filebrowser through 2.63.23 fails to validate named pipes in directory archive and public download handlers, allowing attackers to trigger blocking open syscalls. Authenticated users or anonymous visitors with public share links can repeatedly request archives containing named pipes to pin server goroutines and exhaust connection resources. |
| A weakness has been identified in kvcache-ai mooncake up to 0.3.12/0.3.14-rc1. Impacted is the function MasterService::GetReplicaListByRegex of the component Regular Expression Handler. Executing a manipulation can lead to allocation of resources. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| hpack is an HTTP/2 Header Encoding for Python. Prior to version 4.2.0, unbounded variable integer decoding can cause run-away computation on malformed input leading to O(n^2) runtime, effectively blocking further processing with large enough unsanitized input. A fix is available in python-hyper/hpack v4.2.0 to restricted variable integer decoding to uint32 to prevent run-away computation. As a workaround, sanitize input to hpack decoder for long sequences of `0xFF` values to prevent malicious use. |
| Jawn is an open source JSON parser. Prior to 1.7.0, Jawn's AsyncParser can perform quadratic work when a single JSON token is delivered across many small chunks because each absorb call rescans the incomplete token from the start. A remote attacker who controls untrusted JSON input and its chunk sizes can exhaust CPU resources and cause denial of service in applications using AsyncParser. This issue is fixed in version 1.7.0. |
