| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix memory leak on codec_info allocation failure
In wave5_vpu_open_enc() and wave5_vpu_open_dec(), a vpu instance is
allocated via kzalloc(). If the subsequent allocation for inst->codec_info
fails, the functions return -ENOMEM without freeing the previously
allocated instance, causing a memory leak.
Fix this by calling kfree() on the instance in this error path to ensure
it is properly released. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: pwm: Fix potential memory leak on init error
When initializing a PWM chip using pwmchip_alloc(), the allocated device
owns an initial reference that must be released on all error paths.
If __pinned_init() were to fail, the allocated pwm_chip would currently
leak because the error path returns without calling pwmchip_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
gpib: Fix memory leak in ni_usb_init()
In ni_usb_init(), if ni_usb_setup_init() fails, the function returns
-EFAULT without freeing the allocated writes buffer, leading to a
memory leak.
Additionally, ni_usb_setup_init() returns 0 on failure, which causes
ni_usb_init() to return -EFAULT, an inappropriate error code for this
situation.
Fix the leak by freeing writes in the error path. Modify
ni_usb_setup_init() to return -EINVAL on failure and propagate this
error code in ni_usb_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: arizona: Fix regulator resource leak on wm5102_clear_write_sequencer() failure
The wm5102_clear_write_sequencer() helper may return an error
and just return, bypassing the cleanup sequence and causing
regulators to remain enabled, leading to a resource leak.
Change the direct return to jump to the err_reset label to
properly free the resources. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Fix memleak of newsk in unix_stream_connect().
When prepare_peercred() fails in unix_stream_connect(),
unix_release_sock() is not called for newsk, and the memory
is leaked.
Let's move prepare_peercred() before unix_create1(). |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: dw: Fix memory leak in dw_i3c_master_i2c_xfers()
The dw_i3c_master_i2c_xfers() function allocates memory for the xfer
structure using dw_i3c_master_alloc_xfer(). If pm_runtime_resume_and_get()
fails, the function returns without freeing the allocated xfer, resulting
in a memory leak.
Add a dw_i3c_master_free_xfer() call to the error path to ensure the
allocated memory is properly freed.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| A security vulnerability has been detected in GPAC up to 2.4.0. Affected by this issue is the function Media_GetSample of the file src/isomedia/media.c of the component MP4Box. Such manipulation of the argument cat leads to memory leak. The attack can only be performed from a local environment. The exploit has been disclosed publicly and may be used. The name of the patch is e79c5cbe8b3fed27f4854ec229457d30c96206f1. It is best practice to apply a patch to resolve this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ch341: fix memory leaks on probe failures
Make sure to deregister the controller, disable pins, and kill and free
the RX URB on probe failures to mirror disconnect and avoid memory
leaks and use-after-free.
Also add an explicit URB kill on disconnect for symmetry (even if that
is not strictly required as USB core would have stopped it in the
current setup). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/stat: fix memory leak on damon_start() failure in damon_stat_start()
Destroy the DAMON context and reset the global pointer when damon_start()
fails. Otherwise, the context allocated by damon_stat_build_ctx() is
leaked, and the stale damon_stat_context pointer will be overwritten on
the next enable attempt, making the old allocation permanently
unreachable. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
When commit 0e1a4d427f58 ("crypto: caam: Unembed net_dev structure in
dpaa2") converted embedded net_device to dynamically allocated pointers,
it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in
dpaa2_dpseci_free() for error paths.
This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe
due to DPIO devices not being ready yet. The kernel's deferred probe
mechanism handles the retry successfully, but the netdevs allocated during
the failed probe attempt are never freed, resulting in kmemleak reports
showing multiple leaked netdev-related allocations all traced back to
dpaa2_caam_probe().
Fix this by preserving the CPU mask of allocated netdevs during setup and
using it for cleanup in dpaa2_dpseci_free(). This approach ensures that
only the CPUs that actually had netdevs allocated will be cleaned up,
avoiding potential issues with CPU hotplug scenarios. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix memory leak in amdxdna_ubuf_map
The amdxdna_ubuf_map() function allocates memory for sg and
internal sg table structures, but it fails to free them if subsequent
operations (sg_alloc_table_from_pages or dma_map_sgtable) fail. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix chunk map leak in btrfs_map_block() after btrfs_chunk_map_num_copies()
Fix a chunk map leak in btrfs_map_block(): if we return early with -EINVAL,
we're not freeing the chunk map that we've just looked up. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg-prueth: Fix memory leak in XDP_DROP for non-zero-copy mode
Page recycling was removed from the XDP_DROP path in emac_run_xdp() to
avoid conflicts with AF_XDP zero-copy mode, which uses xsk_buff_free()
instead.
However, this causes a memory leak when running XDP programs that drop
packets in non-zero-copy mode (standard page pool mode). The pages are
never returned to the page pool, leading to OOM conditions.
Fix this by handling cleanup in the caller, emac_rx_packet().
When emac_run_xdp() returns ICSSG_XDP_CONSUMED for XDP_DROP, the
caller now recycles the page back to the page pool. The zero-copy
path, emac_rx_packet_zc() already handles cleanup correctly with
xsk_buff_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - Fix ADF_DEV_RESET_SYNC memory leak
Using completion_done to determine whether the caller has gone
away only works after a complete call. Furthermore it's still
possible that the caller has not yet called wait_for_completion,
resulting in another potential UAF.
Fix this by making the caller use cancel_work_sync and then freeing
the memory safely. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: Fix memory leak in dwc2_hcd_init
usb_create_hcd will alloc memory for hcd, and we should
call usb_put_hcd to free it when platform_get_resource()
fails to prevent memory leak.
goto error2 label instead error1 to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix page array leak
d9f595b9a65e ("io_uring/zcrx: fix leaking pages on sg init fail") fixed
a page leakage but didn't free the page array, release it as well. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: samsung-dsim: Fix memory leak in error path
In samsung_dsim_host_attach(), drm_bridge_add() is called to add the
bridge. However, if samsung_dsim_register_te_irq() or
pdata->host_ops->attach() fails afterwards, the function returns
without removing the bridge, causing a memory leak.
Fix this by adding proper error handling with goto labels to ensure
drm_bridge_remove() is called in all error paths. Also ensure that
samsung_dsim_unregister_te_irq() is called if the attach operation
fails after the TE IRQ has been registered.
samsung_dsim_unregister_te_irq() function is moved without changes
to be before samsung_dsim_host_attach() to avoid forward declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp: i2c: fix skb memory leak in receive path
When 'midev->allow_rx' is false, the newly allocated skb isn't consumed
by netif_rx(), it needs to free the skb directly. |
| A specially crafted domain can be used to cause a memory leak in a BIND resolver simply by querying this domain.
This issue affects BIND 9 versions 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, and 9.20.9-S1 through 9.20.20-S1.
BIND 9 versions 9.18.0 through 9.18.46 and 9.18.11-S1 through 9.18.46-S1 are NOT affected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skb: fix cross-cache free of KFENCE-allocated skb head
SKB_SMALL_HEAD_CACHE_SIZE is intentionally set to a non-power-of-2
value (e.g. 704 on x86_64) to avoid collisions with generic kmalloc
bucket sizes. This ensures that skb_kfree_head() can reliably use
skb_end_offset to distinguish skb heads allocated from
skb_small_head_cache vs. generic kmalloc caches.
However, when KFENCE is enabled, kfence_ksize() returns the exact
requested allocation size instead of the slab bucket size. If a caller
(e.g. bpf_test_init) allocates skb head data via kzalloc() and the
requested size happens to equal SKB_SMALL_HEAD_CACHE_SIZE, then
slab_build_skb() -> ksize() returns that exact value. After subtracting
skb_shared_info overhead, skb_end_offset ends up matching
SKB_SMALL_HEAD_HEADROOM, causing skb_kfree_head() to incorrectly free
the object to skb_small_head_cache instead of back to the original
kmalloc cache, resulting in a slab cross-cache free:
kmem_cache_free(skbuff_small_head): Wrong slab cache. Expected
skbuff_small_head but got kmalloc-1k
Fix this by always calling kfree(head) in skb_kfree_head(). This keeps
the free path generic and avoids allocator-specific misclassification
for KFENCE objects. |
