Export limit exceeded: 424136 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (6829 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97513 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Release m2m_ctx after Instance Removed from List Possible use after free if IRQ thread manages to obtain spinlock between m2m_ctx release and wave5_release function removing stream instance from list of active instances. The IRQ thread looks for the m2m_ctx which is freed so null pointer dereference occurs. | ||||
| CVE-2026-90397 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Fix NULL dereference in IRQ handler before __scm is published In qcom_scm_probe(), devm_request_threaded_irq() is called before smp_store_release(&__scm, scm). Two paths can dereference __scm before it is published, both causing a NULL pointer dereference. The IRQ handler receives scm via its data argument but passes only wq_ctx to qcom_scm_waitq_wakeup() and qcom_scm_get_completion(), which then dereference __scm directly. Thread scm through both functions so the IRQ handler path never touches __scm. Non-atomic SMC calls made during probe (e.g. from qcom_tzmem_init via qcom_scm_shm_bridge_enable) can return WAITQ_SLEEP, causing qcom_scm_wait_for_wq_completion() to run before __scm is published and dereference it. Add platform_set_drvdata(pdev, scm) early in probe and change qcom_scm_wait_for_wq_completion() to take the device pointer and use dev_get_drvdata() to reach scm, removing any dependency on __scm. | ||||
| CVE-2026-90144 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dpll: fix NULL deref in dpll_device_ops() during teardown race When the last owner of a dpll device unregisters while a foreign driver still holds a pin on it via dpll_pin_on_pin_register(), the dpll object stays alive with an empty registration list. A pin notification queued before the unregister (e.g. ice reacting to zl3073x_i2c removal) then walks pin->dpll_refs into dpll_device_ops(), which trips the WARN_ON and dereferences the missing registration. dpll_lock cannot help because the notification work was queued before the unregistering driver took the lock. Treat the empty registration list as a legitimate transient state. Make dpll_priv() and dpll_device_ops() return NULL in that case and make every pin netlink path that resolves a device from a pin skip such dplls. dpll_cmd_pin_get_one() picks a ref with a live registration and returns -ENODEV when there is none, the pin dumpit skips such a pin instead of aborting the dump, dpll_msg_add_pin_dplls() and the frequency, esync, reference sync and phase adjust set paths skip dead refs, and dpll_pin_parent_device_set() validates the parent with dpll_device_get_by_id(). dpll_pin_register() is the last caller that dereferenced the device ops without a check, so move its frequency monitor validation under dpll_lock and tolerate a missing registration there as well. The empty registration list is equivalent to a cleared DPLL_REGISTERED mark, both transitions happen under dpll_lock in dpll_device_register() and dpll_device_unregister(). A pin notification for a pin whose dplls are all gone is now dropped with -ENODEV instead of crashing, all callers in the core ignore that return value. WARNING: drivers/dpll/dpll_core.c:1092 at dpll_device_ops+0x24/0x40, CPU#83: kworker/u576:3/23471 Modules linked in: ... ice ... zl3073x_i2c(-) ... zl3073x ... Workqueue: ice_dpll_wq ice_dpll_pin_notify_work [ice] RIP: 0010:dpll_device_ops+0x24/0x40 Call Trace: <TASK> dpll_cmd_pin_get_one+0x336/0x520 dpll_pin_event_send+0x82/0x140 dpll_pin_on_pin_unregister+0xbb/0x160 ice_dpll_pin_notify_work+0x1bc/0x1f0 [ice] process_one_work+0x19e/0x370 worker_thread+0x1a6/0x310 kthread+0xe4/0x120 ret_from_fork+0x1a1/0x270 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page | ||||
| CVE-2026-90060 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: control: Don't add invalid kcontrols to LED layer The kcontrol LED state layer tries to track the all associated kcontrol elements with naive assumptions that they are readable. But one can create a write-only element that has no get callback (even a user element can do it), and this may lead to a NULL dereference at the call chain of snd_ctl_led_notify(), as found by syzkaller. For avoiding the Oops, add a sanity check of the kcontrol's info and get callbacks, and just skip the invalid kcontrols before assigning the kctl to the LED layer. | ||||
| CVE-2026-89802 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/uvmm: fix NULL deref unwinding an OP_MAP_SPARSE op Each bind_job_op is zeroed by kzalloc_obj() in bind_job_op_from_uop(), and the OP_MAP_SPARSE case in nouveau_uvmm_bind_job_submit() only creates a region, so op->ops stays NULL for a successfully processed sparse map. If a later op in the same job fails, the reverse unwind loop revisits that op and calls drm_gpuva_ops_free(&uvmm->base, op->ops) unconditionally. drm_gpuva_ops_free() dereferences its argument right away (list_for_each_entry_safe on &ops->list), so a NULL op->ops oopses. The path is reachable by any render-node fd holder, since NOUVEAU_VM_BIND is DRM_RENDER_ALLOW. Guard the free with IS_ERR_OR_NULL(), as nouveau_uvmm_bind_job_cleanup() already does for the identical free. | ||||
| CVE-2026-80614 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: emac: Fix NULL pointer dereference in emac_probe Move devm_request_irq() after devm_platform_ioremap_resource() so that dev->emacp is mapped before the interrupt handler can fire. An early interrupt hitting emac_irq() would dereference the NULL dev->emacp and crash. Also remove redundant error message. devm_platform_ioremap_resource() already returns an error message with dev_err_probe(). | ||||
| CVE-2026-74734 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firewire: ohci: fix NULL pointer dereference in ar_context_release During the error handling path of the driver's probe function, a NULL pointer dereference can occur in ar_context_release(). When pci_probe() fails early (e.g., if pcim_enable_device() or MMIO mapping fails), the devres cleanup mechanism invokes release_ohci(). This function unconditionally calls ar_context_release() to clean up the asynchronous receive contexts. However, if ar_context_init() was not yet called, ctx->ohci remains NULL (as the fw_ohci structure is zero-initialized by devres_alloc()). ar_context_release() immediately dereferences ctx->ohci to get the dev pointer before checking if the context was actually initialized, leading to a crash: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:ar_context_release+0x3f/0x380 drivers/firewire/ohci.c:543 Call Trace: release_ohci+0x3f/0x60 drivers/firewire/ohci.c:3567 release_nodes drivers/base/devres.c:546 [inline] devres_release_all+0x1a8/0x260 drivers/base/devres.c:576 device_unbind_cleanup drivers/base/dd.c:597 [inline] really_probe+0x451/0xae0 drivers/base/dd.c:772 To fix this, move the assignment of the dev pointer after the !ctx->buffer check. If ctx->buffer is NULL, it indicates that the context was never successfully initialized and there is nothing to release, safely avoiding the dereference of the uninitialized ctx->ohci pointer. | ||||
| CVE-2026-74728 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: handle NULL b_addr in xfs_buf_free When xfs_buf_alloc_backing_mem() fails, xfs_buf_free() is called with bp->b_addr still NULL. The code falls through to the folio_put path which calls virt_to_folio(NULL), dereferencing an invalid address and causing a kernel crash. Call Trace: xfs_buf_free+0x25f/0x510 xfs_buf_alloc+0xc98/0x19b0 xfs_buf_find_insert+0x55/0x14d0 xfs_buf_get_map+0x122b/0x17c0 xfbtree_init_leaf_block+0x11c/0x4a0 xfbtree_init+0x1bb/0x460 xrep_rmap_setup_scan+0x100/0x1f0 xrep_rmapbt+0x41/0xc0 Fix this by skipping folio_put() when bp->b_addr is NULL. | ||||
| CVE-2026-68375 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Handle partially initialized auxiliary devices bnxt_aux_devices_init() calls auxiliary_device_init() before all fields used by bnxt_aux_dev_release() are initialized. After auxiliary_device_init() succeeds, later errors must unwind with auxiliary_device_uninit(), which invokes the release callback. The release callback assumes that aux_priv->id, aux_priv->edev, edev->net and edev->ulp_tbl are all populated. If allocation fails after auxiliary_device_init(), the release path can otherwise dereference or clear partially initialized state. Allocate and attach the bnxt_en_dev and ULP table before calling auxiliary_device_init(), so the release callback only sees a fully initialized auxiliary private object. If auxiliary_device_init() itself fails, free those allocations directly because device_initialize() has not run and the release callback will not be invoked. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-68291 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix max_vport related crash on allocation error during init Set adapter->max_vports only after successful allocation of vports, netdevs and vport_config buffers. This fixes possible crashes on reset or rmmod, following failed allocation on init [ 305.981402] idpf 0000:83:00.0: enabling device (0100 -> 0102) [ 305.994464] idpf 0000:83:00.0: Device HW Reset initiated [ 320.416872] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 320.416918] #PF: supervisor read access in kernel mode [ 320.416942] #PF: error_code(0x0000) - not-present page [ 320.416963] PGD 2099657067 P4D 0 [ 320.416983] Oops: Oops: 0000 [#1] SMP NOPTI ... [ 320.417093] RIP: 0010:idpf_remove+0x118/0x200 [idpf] [ 320.417130] Code: 8b bb 98 09 00 00 e8 17 0f 5b e5 48 8b bb e8 08 00 00 e8 0b 0f 5b e5 66 83 bb 28 06 00 00 00 48 8b bb 20 06 00 00 74 49 31 ed <48> 8b 04 ef 48 85 c0 74 2f 48 8b 78 20 e8 66 58 91 e5 48 8b 83 20 [ 320.417183] RSP: 0018:ff7322212903fdb8 EFLAGS: 00010246 [ 320.417205] RAX: 0000000000000000 RBX: ff4463de40300000 RCX: ff7322212903fd4c [ 320.417228] RDX: 0000000000000001 RSI: ffffffffa7f7d100 RDI: 0000000000000000 [ 320.417250] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 320.417272] R10: 0000000000000001 R11: ff4463de3a638f58 R12: ff4463be89ac7000 [ 320.417294] R13: ff4463be89ac7198 R14: ff4463be94fc7198 R15: ffffffffc0f10f20 [ 320.417317] FS: 00007f963c0e6740(0000) GS:ff4463fdd65d8000(0000) knlGS:0000000000000000 [ 320.417342] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 320.417362] CR2: 0000000000000000 CR3: 00000020ba674002 CR4: 0000000000773ef0 [ 320.417385] PKRU: 55555554 [ 320.417398] Call Trace: [ 320.417412] <TASK> [ 320.417429] pci_device_remove+0x42/0xb0 [ 320.417459] device_release_driver_internal+0x1a9/0x210 [ 320.417492] driver_detach+0x4b/0x90 [ 320.417516] bus_remove_driver+0x70/0x100 [ 320.417539] pci_unregister_driver+0x2e/0xb0 [ 320.417564] __do_sys_delete_module.constprop.0+0x190/0x2f0 [ 320.417592] ? kmem_cache_free+0x31e/0x550 [ 320.417619] ? lockdep_hardirqs_on_prepare+0xde/0x190 [ 320.417644] ? do_syscall_64+0x38/0x6b0 [ 320.417665] do_syscall_64+0xc8/0x6b0 [ 320.417683] ? clear_bhb_loop+0x30/0x80 [ 320.417706] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 320.417727] RIP: 0033:0x7f963bb30beb | ||||
| CVE-2026-68105 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix kernel panic during driver load failure Avoid kernel panic if MES init fails during driver load. The KIQ ring is falsely marked as ready as ASICs that use MES, KIQ is owned by MES. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu] Call Trace: gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu] amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu] amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu] amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu] amdgpu_gart_unbind+0x72/0x90 [amdgpu] amdgpu_ttm_backend_unbind+0xa4/0xb0 [amdgpu] amdgpu_ttm_tt_unpopulate+0x13/0xd0 [amdgpu] amdttm_tt_unpopulate+0x29/0x70 [amdttm] ttm_bo_put+0x1eb/0x360 [amdttm] amdgpu_bo_free_kernel+0xf9/0x1f0 [amdgpu] amdgpu_ih_ring_fini+0x5a/0x90 [amdgpu] amdgpu_irq_fini_hw+0x58/0x80 [amdgpu] amdgpu_device_fini_hw+0x4e0/0x5b0 [amdgpu] amdgpu_driver_load_kms+0x60/0xa0 [amdgpu] amdgpu_pci_probe+0x28e/0x6d0 [amdgpu] pci_device_probe+0x19f/0x220 really_probe+0x1ed/0x340 driver_probe_device+0x1e/0x80 __driver_attach+0xd3/0x1a0 bus_for_each_dev+0x68/0xa0 bus_add_driver+0x19f/0x270 driver_register+0x5d/0xf0 do_one_initcall+0xac/0x200 do_init_module+0x1ec/0x280 __se_sys_finit_module+0x2de/0x310 do_syscall_64+0x6a/0x250 entry_SYSCALL_64_after_hwframe+0x4b/0x53 (cherry picked from commit 4623b958dd6da0f4c3026afdf330626a09ecb0f0) | ||||
| CVE-2026-46282 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: frequency: admv1013: fix NULL pointer dereference on str When device_property_read_string() fails, str is left uninitialized but the code falls through to strcmp(str, ...), dereferencing a garbage pointer. Replace manual read/strcmp with device_property_match_property_string() and consolidate the SE mode enums into a single sequential enum, mapping to hardware register values via a switch consistent with other bitfields in the driver. Several cleanup patches have been applied to this driver recently so this will need a manual backport. | ||||
| CVE-2026-43337 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference in dcn401_init_hw() dcn401_init_hw() assumes that update_bw_bounding_box() is valid when entering the update path. However, the existing condition: ((!fams2_enable && update_bw_bounding_box) || freq_changed) does not guarantee this, as the freq_changed branch can evaluate to true independently of the callback pointer. This can result in calling update_bw_bounding_box() when it is NULL. Fix this by separating the update condition from the pointer checks and ensuring the callback, dc->clk_mgr, and bw_params are validated before use. Fixes the below: ../dc/hwss/dcn401/dcn401_hwseq.c:367 dcn401_init_hw() error: we previously assumed 'dc->res_pool->funcs->update_bw_bounding_box' could be null (see line 362) (cherry picked from commit 86117c5ab42f21562fedb0a64bffea3ee5fcd477) | ||||
| CVE-2026-89717 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: zram: set default primary compressor in zram_destroy_comps() Patch series "zram: fix zram issues reported by sashiko". Sashiko drove by and reported [1] a couple of zram issues: a possible BUG_ON() in zlib code due to missing winbits range validation and one possible NULL-ptr dereference in zcomp. Both are low risk yet still worth fixing. This patch (of 2): zram_destroy_comps() resets all compressors and leaves them set to NULL, including the primary one, which is invalid device state, as now comp_algorithm_show()->strcmp() can be called on a NULL compressor. Set default primary compressor in zram_destroy_comps(). | ||||
| CVE-2026-89451 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/sva: Set handle->dev before the SVA handle is visible iommu_attach_device_pasid() installs the new SVA attach handle in the group PASID lookup before iommu_sva_bind_device() returns. A concurrent bind can therefore find and reuse the same handle after iommu_sva_lock is dropped. handle->dev was initialized after dropping iommu_sva_lock. This leaves a window where a racing bind can return a handle whose dev pointer is still NULL. A subsequent iommu_sva_unbind_device() can then dereference it via handle->dev->iommu_group. Initialize handle->dev before releasing iommu_sva_lock so any visible SVA handle is fully initialized. | ||||
| CVE-2026-89439 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Add a NULL check for sst_inst[] To be consistent with other places, add a NULL check for failed socket loading by checking isst_common.sst_inst[]. | ||||
| CVE-2026-80705 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check if dml21_add_phantom_plane() is successful Verify that the phantom plane was allocated to avoid a later segfault. (cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f) | ||||
| CVE-2026-80704 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: use proper context for logging The same as the rest of the code, get_ss_info_from_atombios() uses calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is initialized only later in calc_pll_max_vco_construct(). Therefore, any output using DC_LOG_SYNC() leads to a NULL pointer deference in get_ss_info_from_atombios(). According to Sashiko, the very same problem exists in dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too. To avoid accessing the NULL context, use clk_src->base.ctx->logger everywhere. That context in base is initialized earlier in dce110_clk_src_construct() and dce112_clk_src_construct(). Before get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions above are actually called. This is done by redefining DC_LOGGER to CTX->logger. Before: dce110_clk_src_construct() did: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM -> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx After: dce110_clk_src_construct() does: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() <- uses clk_src->base.ctx (cherry picked from commit 6f16fcbb0c46a87e3d9685407e906573d60104b0) | ||||
| CVE-2026-80655 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Fix race condition in event registration The zynqmp_power driver registers handlers for suspend and subsystem restart events using register_event(). However, the work structures (zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by these handlers were allocated and initialized after the registration call. This created a race window where, if the firmware triggered an event immediately after registration but before allocation, the callback (suspend_event_callback or subsystem_restart_event_callback) would dereference a NULL pointer in work_pending(), leading to a crash. Fix this by allocating and initializing the work structures before registering the events. | ||||
| CVE-2026-43272 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix possible dereference of uninitialized pointer There is a pointer head_page in rb_meta_validate_events() which is not initialized at the beginning of a function. This pointer can be dereferenced if there is a failure during reader page validation. In this case the control is passed to "invalid" label where the pointer is dereferenced in a loop. To fix the issue initialize orig_head and head_page before calling rb_validate_buffer. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||