| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vm: Clear the scratch_pt pointer on error
Avoid triggering a dereference of an error pointer on cleanup in
xe_vm_free_scratch() by clearing any scratch_pt error pointer.
(cherry picked from commit 358ee50ab565f3c8ea32480e9d03127a81ba32f8) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset
The drm_atomic_get_new_connector_state() can return NULL if the
connector is not part of the atomic state. Add a check to prevent
a NULL pointer dereference.
This follows the same pattern used in dpu_encoder_update_topology()
within the same file, which checks for NULL before using conn_state.
Patchwork: https://patchwork.freedesktop.org/patch/665188/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Add error handling for old state CRTC in atomic_disable
Introduce error handling to address an issue where, after a hotplug
event, the cursor continues to update. This situation can lead to a
kernel panic due to accessing the NULL `old_state->crtc`.
E,g.
Unable to handle kernel NULL pointer dereference at virtual address
Call trace:
mtk_crtc_plane_disable+0x24/0x140
mtk_plane_atomic_update+0x8c/0xa8
drm_atomic_helper_commit_planes+0x114/0x2c8
drm_atomic_helper_commit_tail_rpm+0x4c/0x158
commit_tail+0xa0/0x168
drm_atomic_helper_commit+0x110/0x120
drm_atomic_commit+0x8c/0xe0
drm_atomic_helper_update_plane+0xd4/0x128
__setplane_atomic+0xcc/0x110
drm_mode_cursor_common+0x250/0x440
drm_mode_cursor_ioctl+0x44/0x70
drm_ioctl+0x264/0x5d8
__arm64_sys_ioctl+0xd8/0x510
invoke_syscall+0x6c/0xe0
do_el0_svc+0x68/0xe8
el0_svc+0x34/0x60
el0t_64_sync_handler+0x1c/0xf8
el0t_64_sync+0x180/0x188
Adding NULL pointer checks to ensure stability by preventing operations
on an invalid CRTC state. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slub: avoid accessing metadata when pointer is invalid in object_err()
object_err() reports details of an object for further debugging, such as
the freelist pointer, redzone, etc. However, if the pointer is invalid,
attempting to access object metadata can lead to a crash since it does
not point to a valid object.
One known path to the crash is when alloc_consistency_checks()
determines the pointer to the allocated object is invalid because of a
freelist corruption, and calls object_err() to report it. The debug code
should report and handle the corruption gracefully and not crash in the
process.
In case the pointer is NULL or check_valid_pointer() returns false for
the pointer, only print the pointer value and skip accessing metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr
nfs4_decode_mp_ds_addr() decodes the r_netid and r_addr opaques of a
netaddr4 from a GETDEVICEINFO multipath-DS body, then immediately
calls strrchr(buf, '.') to locate the port separator. Both decodes
use xdr_stream_decode_string_dup(), and the current code checks only
"nlen < 0" / "rlen < 0" before dereferencing the returned string.
When the on-wire opaque has length zero, xdr_stream_decode_opaque_inline()
returns 0 and xdr_stream_decode_string_dup() falls through to its
"*str = NULL; return ret" tail, leaving buf NULL with a return value
of 0. The "< 0" check does not catch this, and the next line is
strrchr(NULL, '.'), a kernel NULL pointer dereference reachable from
any pNFS-flexfile client mounted against a malicious or compromised
metadata server.
Reject the zero-length cases explicitly so the decoder fails with
-EBADMSG (treated as a malformed GETDEVICEINFO body) instead of
panicking the client. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: PCM: Fix wait queue list corruption in snd_pcm_drain() on linked streams
snd_pcm_drain() uses init_waitqueue_entry which does not clear
entry.prev/next, and add_wait_queue with a conditional
remove_wait_queue that is skipped when to_check is no longer
in the group after concurrent UNLINK. The orphaned wait entry
remains on the unlinked substream sleep queue. On the next
drain iteration, add_wait_queue adds the entry to a new queue
while still linked on the old one, corrupting both lists. A
subsequent wake_up dereferences NULL at the func pointer
(mapped from the spinlock at offset 0 of the misinterpreted
wait_queue_head_t), causing a kernel panic.
Replace init_waitqueue_entry/add_wait_queue/conditional
remove_wait_queue with init_wait_entry/prepare_to_wait/
finish_wait. init_wait_entry clears prev/next via
INIT_LIST_HEAD on each iteration and sets
autoremove_wake_function which auto-removes the entry on
wake-up. finish_wait safely handles both the already-removed
and still-queued cases. |
| In the Linux kernel, the following vulnerability has been resolved:
hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf
netvsc_copy_to_send_buf() copies page buffer entries into the VMBus
send buffer using phys_to_virt() on the entry PFN. Entries for the
RNDIS header and the skb linear data come from kmalloc'd memory and
are always in the kernel direct map, but entries for skb fragments
reference page cache or user pages, which on 32-bit x86 with
CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page
phys_to_virt() returns an address outside the direct map and the
subsequent memcpy() faults on the transmit softirq path, which is
fatal.
Map the pages with kmap_local_page() instead, handling two properties
of the page buffer entries:
- pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity,
not a native PFN. Reconstruct the physical address first and derive
the native page from it, so the mapping stays correct where
PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages).
- Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN
grouping in the page buffer array"), an entry describes a full
physically contiguous fragment and pb[i].len can exceed PAGE_SIZE,
while kmap_local_page() maps a single page. Copy page by page,
splitting at native page boundaries.
The copy path only handles packets smaller than the send section size
(6144 bytes by default); larger packets take the cp_partial path where
only the RNDIS header is copied. So entries here are bounded by the
section size and a copy is split at most once on 4K-page systems. On
!CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() and
no mapping work is added. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: clear skb->dev before running a sockmap verdict
On the UDP receive path skb->dev is repurposed as dev_scratch (the
truesize/state cache set by udp_set_dev_scratch()), through the
union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff.
When a UDP socket is in a sockmap, sk_data_ready is
sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor()
(sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq.
If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp,
bpf_skc_lookup_tcp), bpf_skc_lookup() does:
if (skb->dev)
caller_net = dev_net(skb->dev);
skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net()
dereferences it as a struct net_device * and the kernel takes a general
protection fault on a non-canonical address in softirq:
Oops: general protection fault, probably for non-canonical address 0x1010000800004a0
CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full)
RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline]
RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047
Call Trace:
<IRQ>
bpf_prog_4675cb904b7071f8+0x12e/0x14e
bpf_prog_run_pin_on_cpu+0xc6/0x1f0
sk_psock_verdict_recv+0x1ba/0x350
udp_read_skb+0x31a/0x370
sk_psock_verdict_data_ready+0x2e3/0x600
__udp_enqueue_schedule_skb+0x4c8/0x650
udpv6_queue_rcv_one_skb+0x3ec/0x740
udp6_unicast_rcv_skb+0x11d/0x140
ip6_protocol_deliver_rcu+0x61e/0x950
ip6_input_finish+0xa9/0x150
NF_HOOK+0x286/0x2f0
ip6_input+0x117/0x220
NF_HOOK+0x286/0x2f0
__netif_receive_skb+0x85/0x200
process_backlog+0x374/0x9a0
__napi_poll+0x4f/0x1c0
net_rx_action+0x3b0/0x770
handle_softirqs+0x15a/0x460
do_softirq+0x57/0x80
</IRQ>
The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on
dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear
skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which
skb_set_owner_sk_safe() set just above. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Use RCU-safe iteration in dev_map_redirect_multi() SKB path
The DEVMAP_HASH branch in dev_map_redirect_multi() uses
hlist_for_each_entry_safe() to iterate hash buckets, but this function
runs under RCU protection (called from xdp_do_generic_redirect_map()
in softirq context). Concurrent writers (__dev_map_hash_update_elem,
dev_map_hash_delete_elem) modify the list using RCU primitives
(hlist_add_head_rcu, hlist_del_rcu).
hlist_for_each_entry_safe() performs plain pointer dereferences without
rcu_dereference(), missing the acquire barrier needed to pair with
writers' rcu_assign_pointer(). On weakly-ordered architectures (ARM64,
POWER), a reader can observe a partially-constructed node. It also
defeats CONFIG_PROVE_RCU lockdep validation and KCSAN data-race
detection.
Replace with hlist_for_each_entry_rcu() using rcu_read_lock_bh_held()
as the lockdep condition, consistent with the rcu_dereference_check()
used in the DEVMAP (non-hash) branch of the same functions. Also fix
the same incorrect lockdep_is_held(&dtab->index_lock) condition in
dev_map_enqueue_multi(), where the lock is not held either. |
| In the Linux kernel, the following vulnerability has been resolved:
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
syzkaller reported a kernel panic in bond_rr_gen_slave_id() reached via
xdp_master_redirect(). Full decoded trace:
https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU
counter that bonding only allocates in bond_open() when the mode is
round-robin. If the bond device was never brought up, rr_tx_counter
stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Fix this in the generic xdp_master_redirect() by refusing to call into
the master's ->ndo_xdp_get_xmit_slave() when the master device is not
up. IFF_UP is only set after ->ndo_open() has successfully returned,
so this reliably excludes masters whose XDP state has not been fully
initialized. Drop the frame with XDP_ABORTED so the exception is
visible via trace_xdp_exception() rather than silently falling through.
This is not specific to bonding: any current or future master that
defers XDP state allocation to ->ndo_open() is protected. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: don't use simple_strtoul
Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(),
and ct_sip_parse_request() with a new sip_parse_port() helper that
validates each digit against the buffer limit, eliminating the use of
simple_strtoul() which assumes NUL-terminated strings.
The previous code dereferenced pointers without bounds checks after
sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated
skb data. A port that reaches the buffer limit without a trailing
character is also rejected as malformed.
Also get rid of all simple_strtoul() usage in conntrack, prefer a
stricter version instead. There are intentional changes:
- Bail out if number is > UINT_MAX and indicate a failure, same for
too long sequences.
While we do accept 05535 as port 5535, we will not accept e.g.
'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261,
we should restrict this to not waste cycles when presented with
malformed packets with 64k '0' characters.
- Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch
'expire=' and 'rports='; both are expected to use base-10.
- In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k
range.
- epaddr_len now returns 0 if the port is invalid, as it already does
for invalid ip addresses. This is intentional. nf_conntrack_sip
performs lots of guesswork to find the right parts of the message
to parse. Being stricter could break existing setups.
Connection tracking helpers are designed to allow traffic to
pass, not to block it.
Based on an earlier patch from Jenny Guanni Qu <qguanni@gmail.com>. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/dma-buf: handle empty bo and UAF races
There look to be some nasty races here when triggering the
invalidate_mappings hook:
1) We do xe_bo_alloc() followed by the attach, before the actual full bo
init step in xe_dma_buf_init_obj(). However the bo is visible on the
attachments list after the attach. This is bad since exporter driver,
say amdgpu, can at any time call back into our invalidate_mappings hook,
with an empty/bogus bo, leading to potential bugs/crashes.
2) Similar to 1) but here we get a UAF, when the invalidate_mappings
hook is triggered. For example, we get as far as xe_bo_init_locked()
but this fails in some way. But here the bo will be freed on error, but
we still have it attached from dma-buf pov, so if the
invalidate_mappings is now triggered then the bo we access is gone and
we trigger UAF and more bugs/crashes.
To fix this, move the attach step until after we actually have a fully
set up buffer object. Note that the bo is not published to userspace
until later, so not sure what the comment "Don't publish the bo
until we have a valid attachment", is referring to.
We have at least two different customers reporting hitting a NULL ptr
deref in evict_flags when importing something from amdgpu, followed by
triggering the evict flow. Hit rate is also pretty low, which would
hint at some kind of race, so something like 1) or 2) might explain
this.
v2:
- Shuffle the order of the ops slightly (no functional change)
- Improve the comment to better explain the ordering (Matt B)
(cherry picked from commit af1f2ad0c59fe4e2f924c526f66e968289d77971) |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: stream: fully roll back denied add-stream state
When ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks and
then lowers outcnt. That leaves removed stream metadata behind, so a
later re-add can reuse a stale ext and hit a null-pointer dereference in
the scheduler get path.
Fix the rollback by tearing down the removed stream state the same way
other stream resizes do. Unschedule the current scheduler state, drop
the removed stream ext state with sctp_stream_outq_migrate(), and then
reschedule the remaining streams.
This keeps scheduler-private RR/FC/PRIO lists consistent while fully
rolling back denied outgoing stream additions. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate dacloffset before building DACL pointers
parse_sec_desc(), build_sec_desc(), and the chown path in
id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd
before proving a DACL header fits inside the returned security
descriptor.
On 32-bit builds a malicious server can return dacloffset near
U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip
past the later pointer-based bounds checks. build_sec_desc() and
id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped
pointer in the chmod/chown rewrite paths.
Validate dacloffset numerically before building any DACL pointer and
reuse the same helper at the three DACL entry points. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads
atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c
unconditionally dereferences 8 bytes at payload_addr(pkt):
value = *(u64 *)payload_addr(pkt);
check_rkey() previously accepted an ATOMIC_WRITE request with pktlen ==
resid == 0 because the length validation only compared pktlen against
resid. A remote initiator that sets the RETH length to 0 therefore reaches
atomic_write_reply() with a zero-byte logical payload, and the responder
reads sizeof(u64) bytes from past the logical end of the packet into
skb->head tailroom, then writes those 8 bytes into the attacker's MR via
rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel
tailroom per probe (the other 4 bytes are the packet's own trailing ICRC).
IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is
protocol-invalid. Hoist a strict length check into check_rkey() so the
responder never reaches the unchecked dereference, and keep the existing
WRITE-family length logic for the normal RDMA WRITE path.
Reproduced on mainline with an unmodified rxe driver: a sustained
zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer
bytes into the attacker's MR, including recognisable kernel strings and
partial kernel-direct-map pointer words. With this patch applied the
responder rejects the PDU and the MR stays all-zero. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix a crash due to incorrect cleanup usage of kfree
Annotating a local pointer variable, which will be assigned with the
kmalloc-family functions, with the `__cleanup(kfree)` attribute will
make the address of the local variable, rather than the address returned
by kmalloc, passed to kfree directly and lead to a crash due to invalid
deallocation of stack address. According to other places in the repo,
the correct usage should be `__free(kfree)`. The code coincidentally
compiled because the parameter type `void *` of kfree is compatible with
the desired type `struct { ... } **`. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: add a bunch of missing ceph_path_info initializers
ceph_mdsc_build_path() must be called with a zero-initialized
ceph_path_info parameter, or else the following
ceph_mdsc_free_path_info() may crash.
Example crash (on Linux 6.18.12):
virt_to_cache: Object is not a Slab page!
WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6732 kmem_cache_free+0x316/0x400
[...]
Call Trace:
[...]
ceph_open+0x13d/0x3e0
do_dentry_open+0x134/0x480
vfs_open+0x2a/0xe0
path_openat+0x9a3/0x1160
[...]
cache_from_obj: Wrong slab cache. names_cache but object is from ceph_inode_info
WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6746 kmem_cache_free+0x2dd/0x400
[...]
kernel BUG at mm/slub.c:634!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
RIP: 0010:__slab_free+0x1a4/0x350
Some of the ceph_mdsc_build_path() callers had initializers, but
others had not, even though they were all added by commit 15f519e9f883
("ceph: fix race condition validating r_parent before applying state").
The ones without initializer are suspectible to random crashes. (I can
imagine it could even be possible to exploit this bug to elevate
privileges.)
Unfortunately, these Ceph functions are undocumented and its semantics
can only be derived from the code. I see that ceph_mdsc_build_path()
initializes the structure only on success, but not on error.
Calling ceph_mdsc_free_path_info() after a failed
ceph_mdsc_build_path() call does not even make sense, but that's what
all callers do, and for it to be safe, the structure must be
zero-initialized. The least intrusive approach to fix this is
therefore to add initializers everywhere. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()
If overlay is used on top of btrfs, dentry->d_sb translates to overlay's
super block and fsid assignment will lead to a crash.
Use file_inode(file)->i_sb to always get btrfs_sb. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: hold claim backbone gateways by reference
batadv_bla_add_claim() can replace claim->backbone_gw and drop the old
gateway's last reference while readers still follow the pointer.
The netlink claim dump path dereferences claim->backbone_gw->orig and
takes claim->backbone_gw->crc_lock without pinning the underlying
backbone gateway. batadv_bla_check_claim() still has the same naked
pointer access pattern.
Reuse batadv_bla_claim_get_backbone_gw() in both readers so they operate
on a stable gateway reference until the read-side work is complete.
This keeps the dump and claim-check paths aligned with the lifetime
rules introduced for the other BLA claim readers. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: avoid dereferencing log items after push callbacks
After xfsaild_push_item() calls iop_push(), the log item may have been
freed if the AIL lock was dropped during the push. Background inode
reclaim or the dquot shrinker can free the log item while the AIL lock
is not held, and the tracepoints in the switch statement dereference
the log item after iop_push() returns.
Fix this by capturing the log item type, flags, and LSN before calling
xfsaild_push_item(), and introducing a new xfs_ail_push_class trace
event class that takes these pre-captured values and the ailp pointer
instead of the log item pointer. |
