| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Multiple DrayTek VigorSwitch models contain a buffer overflow vulnerability in the webBackupAction function. The vulnerability is caused by repeated string concatenation of the pathN, valueN, key, and option fields into fixed-size stack buffers without total length checks. A remote attacker can trigger this vulnerability via crafted input, causing a denial of service or potentially executing arbitrary commands. Exploitation requires valid administrative credentials for the device's web management interface. |
| hashcat contains a heap-based buffer overflow (out-of-bounds write) in the outfile_write() function in src/outfile.c. When assembling output into a fixed-size buffer (HCBUFSIZ_LARGE, ~16 MB), the function sequentially appends the username, separator, hash, and plaintext via memcpy without validating that the accumulated length stays within the buffer capacity. When run with --username --show against a crafted hash file containing an oversized username that nearly fills the buffer, the total assembled output exceeds the buffer, causing a heap buffer overflow that can corrupt memory and crash the process. |
| A flaw has been found in UTT HiPER 1200GW up to 2.5.3-170306. Affected is the function strcpy of the file /goform/formConfigFastDirectionW. Executing a manipulation of the argument ssid can lead to buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. |
| A vulnerability was found in warmcat libwebsockets 4.5.0. Impacted is the function report_raw_cbor of the file lib/misc/lecp.c of the component LECP CBOR Recording. The manipulation results in out-of-bounds write. The attack can be launched remotely. The exploit has been made public and could be used. The patch is identified as 1d44554a1bb262db63ff4e240152a9deecd99054. It is best practice to apply a patch to resolve this issue. |
| A vulnerability was detected in Open5GS 2.8.0. This affects the function pcrf_rx_aar_cb of the file src/pcrf/pcrf-rx-path.c of the component Rx AA-Request Handler. Performing a manipulation results in out-of-bounds read. It is possible to initiate the attack remotely. The patch is named c18dc6938bf63cc7374315d3dca303d92066e746. To fix this issue, it is recommended to deploy a patch. |
| Adobe Campaign Classic before 20.2 have an out-of-bounds read vulnerability. Successful exploitation could lead to information disclosure. |
| The issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4. Processing a maliciously crafted file may lead to unexpected app termination. |
| A vulnerability was found in Comfast CF-N1-S 2.6.0.1. The affected element is the function sub_41AD7C of the file /cgi-bin/mbox-config?method=SET§ion=ntp_timezone of the component Web Management. The manipulation of the argument timestr/ntp_client_enabled results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an improper check for an array index boundary. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an integer overflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to obtain sensitive information due to an integer underflow in the IPv4 IP-options parser. |
| A vulnerability was identified in rexrainbow phaser3-rex-notes up to 1.80.17. This vulnerability affects the function SetValue of the file plugins/utils/object/SetValue.js of the component BehaviorTree Blackboard Data Interface. Such manipulation of the argument key leads to improperly controlled modification of object prototype attributes. The attack can be launched remotely. |
| A vulnerability was detected in UTT HiPER 1250GW up to 3.2.7-210907-180535. This impacts the function strcpy of the file /goform/aspRemoteApConfTempSend of the component HTTP Request Handler. Performing a manipulation of the argument Profile results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init()
ev variable is userspace controlled via event->attr.config and used
as an array index after bounds checking, but without speculation
barriers.
Add the missing array_index_nospec() call to prevent speculative
execution. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate minimum PDU size for transform requests
The receive path applies the minimum SMB2 PDU size check only when
ProtocolId is SMB2_PROTO_NUMBER. A packet carrying
SMB2_TRANSFORM_PROTO_NUM bypasses the check even when the negotiated
dialect does not provide transform handling.
On an SMB 2.1 connection, a short transform packet therefore reaches
init_smb2_rsp_hdr(), which interprets the request as a full SMB2 header
and reads beyond the request allocation. The copied fields can then be
returned to the unauthenticated client.
Compression transforms are converted to ordinary SMB2 messages before
protocol validation. After that conversion, validate ordinary SMB2
requests against SMB2_MIN_SUPPORTED_PDU_SIZE and require encryption
transform requests to contain both a transform header and an SMB2
header. This rejects truncated requests before work allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL
check_add_overflow() unconditionally writes the truncated sum into *d
even on overflow, per its contract in include/linux/overflow.h.
The four check_add_overflow() guards in set_posix_acl_entries_dacl()
and set_ntacl_dacl() break out of the ACE-building loops on overflow,
but the truncated *size is then consumed downstream at the end of
set_ntacl_dacl():
pndacl->size = cpu_to_le16(le16_to_cpu(pndacl->size) + size);
This produces an on-wire NT ACL whose pndacl->size under-reports the
bytes actually written by the preceding fill_ace_for_sid()/memcpy()
calls, yielding a malformed ACL that can trigger out-of-bounds reads
when re-parsed by clients or ksmbd itself.
Restore *size to its pre-addition value on each overflow branch (via
`*size -= ace_sz` / `size -= nt_ace_size`) so that after the break,
*size once again holds the cumulative size of the successfully-written
ACEs. The committed ACL is then truncated-but-self-consistent rather
than malformed.
The ksmbd DACL builders are the only check_add_overflow() sites found
where an overflow path breaks out of a loop and the destination value
is consumed afterward. The other nearby break-style cases either
return -EINVAL on overflow (transport_ipc.c) or break without
consuming the overflowed destination value afterward (buildid.c). |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
afu_ioctl_dma_map() accepts a 64-bit length from userspace via
DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value
is passed to afu_dma_pin_pages() where npages is derived as
length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes
int nr_pages, causing implicit truncation if length is very large.
Validate map.length at the ioctl entry point before calling
afu_dma_map_region(), rejecting values whose page count exceeds
INT_MAX. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg
When the server answers an RTRS READ, rdma_write_sg() builds the source
scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the
peer. Its length is taken directly from the wire descriptor:
plist->length = le32_to_cpu(id->rd_msg->desc[0].len);
rd_msg points into the chunk buffer that the remote peer filled via
RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() ->
process_read()), so desc[0].len is attacker-controlled and, before this
change, was only rejected when zero. The source address is the fixed
chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide
local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs
layer does not constrain the transfer length to max_chunk_size. msg_id
and off are bounded against queue_depth and max_chunk_size in
rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not
checked against the chunk size.
A peer that advertises desc[0].len larger than max_chunk_size can make
the posted RDMA write read past the chunk's mapped region. The resulting
behaviour depends on the IOMMU configuration: with no IOMMU or in
passthrough mode the read may extend into memory adjacent to the chunk
and be returned to the peer, which can disclose host memory; with a
translating IOMMU the out-of-range access is expected to fault and abort
the connection. In either case the transfer exceeds what the protocol
permits and is driven by a remote peer.
Reject a descriptor length above max_chunk_size, mirroring the existing
off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients
do not exceed it: the client sets desc[0].len to its MR length, which is
capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HCI: Remove HCI_AMP support
Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.
Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 26.4 and iPadOS 26.4, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.4, tvOS 26.4, visionOS 26.4, watchOS 26.4. An attacker may be able to cause unexpected system termination or read kernel memory. |
