| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix panic when calling skb_linearize
The panic can be reproduced by executing the command:
./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress --rx-strp 100000
Then a kernel panic was captured:
'''
[ 657.460555] kernel BUG at net/core/skbuff.c:2178!
[ 657.462680] Tainted: [W]=WARN
[ 657.463287] Workqueue: events sk_psock_backlog
...
[ 657.469610] <TASK>
[ 657.469738] ? die+0x36/0x90
[ 657.469916] ? do_trap+0x1d0/0x270
[ 657.470118] ? pskb_expand_head+0x612/0xf40
[ 657.470376] ? pskb_expand_head+0x612/0xf40
[ 657.470620] ? do_error_trap+0xa3/0x170
[ 657.470846] ? pskb_expand_head+0x612/0xf40
[ 657.471092] ? handle_invalid_op+0x2c/0x40
[ 657.471335] ? pskb_expand_head+0x612/0xf40
[ 657.471579] ? exc_invalid_op+0x2d/0x40
[ 657.471805] ? asm_exc_invalid_op+0x1a/0x20
[ 657.472052] ? pskb_expand_head+0xd1/0xf40
[ 657.472292] ? pskb_expand_head+0x612/0xf40
[ 657.472540] ? lock_acquire+0x18f/0x4e0
[ 657.472766] ? find_held_lock+0x2d/0x110
[ 657.472999] ? __pfx_pskb_expand_head+0x10/0x10
[ 657.473263] ? __kmalloc_cache_noprof+0x5b/0x470
[ 657.473537] ? __pfx___lock_release.isra.0+0x10/0x10
[ 657.473826] __pskb_pull_tail+0xfd/0x1d20
[ 657.474062] ? __kasan_slab_alloc+0x4e/0x90
[ 657.474707] sk_psock_skb_ingress_enqueue+0x3bf/0x510
[ 657.475392] ? __kasan_kmalloc+0xaa/0xb0
[ 657.476010] sk_psock_backlog+0x5cf/0xd70
[ 657.476637] process_one_work+0x858/0x1a20
'''
The panic originates from the assertion BUG_ON(skb_shared(skb)) in
skb_linearize(). A previous commit(see Fixes tag) introduced skb_get()
to avoid race conditions between skb operations in the backlog and skb
release in the recvmsg path. However, this caused the panic to always
occur when skb_linearize is executed.
The "--rx-strp 100000" parameter forces the RX path to use the strparser
module which aggregates data until it reaches 100KB before calling sockmap
logic. The 100KB payload exceeds MAX_MSG_FRAGS, triggering skb_linearize.
To fix this issue, just move skb_get into sk_psock_skb_ingress_enqueue.
'''
sk_psock_backlog:
sk_psock_handle_skb
skb_get(skb) <== we move it into 'sk_psock_skb_ingress_enqueue'
sk_psock_skb_ingress____________
↓
|
| → sk_psock_skb_ingress_self
| sk_psock_skb_ingress_enqueue
sk_psock_verdict_apply_________________↑ skb_linearize
'''
Note that for verdict_apply path, the skb_get operation is unnecessary so
we add 'take_ref' param to control it's behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix udp gso skb_segment after pull from frag_list
Commit a1e40ac5b5e9 ("net: gso: fix udp gso fraglist segmentation after
pull from frag_list") detected invalid geometry in frag_list skbs and
redirects them from skb_segment_list to more robust skb_segment. But some
packets with modified geometry can also hit bugs in that code. We don't
know how many such cases exist. Addressing each one by one also requires
touching the complex skb_segment code, which risks introducing bugs for
other types of skbs. Instead, linearize all these packets that fail the
basic invariants on gso fraglist skbs. That is more robust.
If only part of the fraglist payload is pulled into head_skb, it will
always cause exception when splitting skbs by skb_segment. For detailed
call stack information, see below.
Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size
Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify fraglist skbs, breaking these invariants.
In extreme cases they pull one part of data into skb linear. For UDP,
this causes three payloads with lengths of (11,11,10) bytes were
pulled tail to become (12,10,10) bytes.
The skbs no longer meets the above SKB_GSO_FRAGLIST conditions because
payload was pulled into head_skb, it needs to be linearized before pass
to regular skb_segment.
skb_segment+0xcd0/0xd14
__udp_gso_segment+0x334/0x5f4
udp4_ufo_fragment+0x118/0x15c
inet_gso_segment+0x164/0x338
skb_mac_gso_segment+0xc4/0x13c
__skb_gso_segment+0xc4/0x124
validate_xmit_skb+0x9c/0x2c0
validate_xmit_skb_list+0x4c/0x80
sch_direct_xmit+0x70/0x404
__dev_queue_xmit+0x64c/0xe5c
neigh_resolve_output+0x178/0x1c4
ip_finish_output2+0x37c/0x47c
__ip_finish_output+0x194/0x240
ip_finish_output+0x20/0xf4
ip_output+0x100/0x1a0
NF_HOOK+0xc4/0x16c
ip_forward+0x314/0x32c
ip_rcv+0x90/0x118
__netif_receive_skb+0x74/0x124
process_backlog+0xe8/0x1a4
__napi_poll+0x5c/0x1f8
net_rx_action+0x154/0x314
handle_softirqs+0x154/0x4b8
[118.376811] [C201134] rxq0_pus: [name:bug&]kernel BUG at net/core/skbuff.c:4278!
[118.376829] [C201134] rxq0_pus: [name:traps&]Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
[118.470774] [C201134] rxq0_pus: [name:mrdump&]Kernel Offset: 0x178cc00000 from 0xffffffc008000000
[118.470810] [C201134] rxq0_pus: [name:mrdump&]PHYS_OFFSET: 0x40000000
[118.470827] [C201134] rxq0_pus: [name:mrdump&]pstate: 60400005 (nZCv daif +PAN -UAO)
[118.470848] [C201134] rxq0_pus: [name:mrdump&]pc : [0xffffffd79598aefc] skb_segment+0xcd0/0xd14
[118.470900] [C201134] rxq0_pus: [name:mrdump&]lr : [0xffffffd79598a5e8] skb_segment+0x3bc/0xd14
[118.470928] [C201134] rxq0_pus: [name:mrdump&]sp : ffffffc008013770 |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/rapidio/rio_cm.c: prevent possible heap overwrite
In
riocm_cdev_ioctl(RIO_CM_CHAN_SEND)
-> cm_chan_msg_send()
-> riocm_ch_send()
cm_chan_msg_send() checks that userspace didn't send too much data but
riocm_ch_send() failed to check that userspace sent sufficient data. The
result is that riocm_ch_send() can write to fields in the rio_ch_chan_hdr
which were outside the bounds of the space which cm_chan_msg_send()
allocated.
Address this by teaching riocm_ch_send() to check that the entire
rio_ch_chan_hdr was copied in from userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race
huge_pmd_unshare() drops a reference on a page table that may have
previously been shared across processes, potentially turning it into a
normal page table used in another process in which unrelated VMAs can
afterwards be installed.
If this happens in the middle of a concurrent gup_fast(), gup_fast() could
end up walking the page tables of another process. While I don't see any
way in which that immediately leads to kernel memory corruption, it is
really weird and unexpected.
Fix it with an explicit broadcast IPI through tlb_remove_table_sync_one(),
just like we do in khugepaged when removing page tables for a THP
collapse. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: protect vq->log_used with vq->mutex
The vhost-scsi completion path may access vq->log_base when vq->log_used is
already set to false.
vhost-thread QEMU-thread
vhost_scsi_complete_cmd_work()
-> vhost_add_used()
-> vhost_add_used_n()
if (unlikely(vq->log_used))
QEMU disables vq->log_used
via VHOST_SET_VRING_ADDR.
mutex_lock(&vq->mutex);
vq->log_used = false now!
mutex_unlock(&vq->mutex);
QEMU gfree(vq->log_base)
log_used()
-> log_write(vq->log_base)
Assuming the VMM is QEMU. The vq->log_base is from QEMU userpace and can be
reclaimed via gfree(). As a result, this causes invalid memory writes to
QEMU userspace.
The control queue path has the same issue. |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: Do not truncate file size
'len' is used to store the result of i_size_read(), so making 'len'
a size_t results in truncation to 4GiB on 32-bit systems. |
| In the Linux kernel, the following vulnerability has been resolved:
genirq/msi: Store the IOMMU IOVA directly in msi_desc instead of iommu_cookie
The IOMMU translation for MSI message addresses has been a 2-step process,
separated in time:
1) iommu_dma_prepare_msi(): A cookie pointer containing the IOVA address
is stored in the MSI descriptor when an MSI interrupt is allocated.
2) iommu_dma_compose_msi_msg(): this cookie pointer is used to compute a
translated message address.
This has an inherent lifetime problem for the pointer stored in the cookie
that must remain valid between the two steps. However, there is no locking
at the irq layer that helps protect the lifetime. Today, this works under
the assumption that the iommu domain is not changed while MSI interrupts
being programmed. This is true for normal DMA API users within the kernel,
as the iommu domain is attached before the driver is probed and cannot be
changed while a driver is attached.
Classic VFIO type1 also prevented changing the iommu domain while VFIO was
running as it does not support changing the "container" after starting up.
However, iommufd has improved this so that the iommu domain can be changed
during VFIO operation. This potentially allows userspace to directly race
VFIO_DEVICE_ATTACH_IOMMUFD_PT (which calls iommu_attach_group()) and
VFIO_DEVICE_SET_IRQS (which calls into iommu_dma_compose_msi_msg()).
This potentially causes both the cookie pointer and the unlocked call to
iommu_get_domain_for_dev() on the MSI translation path to become UAFs.
Fix the MSI cookie UAF by removing the cookie pointer. The translated IOVA
address is already known during iommu_dma_prepare_msi() and cannot change.
Thus, it can simply be stored as an integer in the MSI descriptor.
The other UAF related to iommu_get_domain_for_dev() will be addressed in
patch "iommu: Make iommu_dma_prepare_msi() into a generic operation" by
using the IOMMU group mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix use-after-free in cifs_fill_dirent
There is a race condition in the readdir concurrency process, which may
access the rsp buffer after it has been released, triggering the
following KASAN warning.
==================================================================
BUG: KASAN: slab-use-after-free in cifs_fill_dirent+0xb03/0xb60 [cifs]
Read of size 4 at addr ffff8880099b819c by task a.out/342975
CPU: 2 UID: 0 PID: 342975 Comm: a.out Not tainted 6.15.0-rc6+ #240 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xce/0x640
kasan_report+0xb8/0xf0
cifs_fill_dirent+0xb03/0xb60 [cifs]
cifs_readdir+0x12cb/0x3190 [cifs]
iterate_dir+0x1a1/0x520
__x64_sys_getdents+0x134/0x220
do_syscall_64+0x4b/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f996f64b9f9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 0d f7 c3 0c 00 f7 d8 64 89 8
RSP: 002b:00007f996f53de78 EFLAGS: 00000207 ORIG_RAX: 000000000000004e
RAX: ffffffffffffffda RBX: 00007f996f53ecdc RCX: 00007f996f64b9f9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007f996f53dea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000207 R12: ffffffffffffff88
R13: 0000000000000000 R14: 00007ffc8cd9a500 R15: 00007f996f51e000
</TASK>
Allocated by task 408:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x6e/0x70
kmem_cache_alloc_noprof+0x117/0x3d0
mempool_alloc_noprof+0xf2/0x2c0
cifs_buf_get+0x36/0x80 [cifs]
allocate_buffers+0x1d2/0x330 [cifs]
cifs_demultiplex_thread+0x22b/0x2690 [cifs]
kthread+0x394/0x720
ret_from_fork+0x34/0x70
ret_from_fork_asm+0x1a/0x30
Freed by task 342979:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x37/0x50
kmem_cache_free+0x2b8/0x500
cifs_buf_release+0x3c/0x70 [cifs]
cifs_readdir+0x1c97/0x3190 [cifs]
iterate_dir+0x1a1/0x520
__x64_sys_getdents64+0x134/0x220
do_syscall_64+0x4b/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The buggy address belongs to the object at ffff8880099b8000
which belongs to the cache cifs_request of size 16588
The buggy address is located 412 bytes inside of
freed 16588-byte region [ffff8880099b8000, ffff8880099bc0cc)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x99b8
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0x80000000000040(head|node=0|zone=1)
page_type: f5(slab)
raw: 0080000000000040 ffff888001e03400 0000000000000000 dead000000000001
raw: 0000000000000000 0000000000010001 00000000f5000000 0000000000000000
head: 0080000000000040 ffff888001e03400 0000000000000000 dead000000000001
head: 0000000000000000 0000000000010001 00000000f5000000 0000000000000000
head: 0080000000000003 ffffea0000266e01 00000000ffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880099b8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880099b8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880099b8180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880099b8200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880099b8280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
POC is available in the link [1].
The problem triggering process is as follows:
Process 1 Process 2
-----------------------------------
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/tls: fix kernel panic when alloc_page failed
We cannot set frag_list to NULL pointer when alloc_page failed.
It will be used in tls_strp_check_queue_ok when the next time
tls_strp_read_sock is called.
This is because we don't reset full_len in tls_strp_flush_anchor_copy()
so the recv path will try to continue handling the partial record
on the next call but we dettached the rcvq from the frag list.
Alternative fix would be to reset full_len.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000028
Call trace:
tls_strp_check_rcv+0x128/0x27c
tls_strp_data_ready+0x34/0x44
tls_data_ready+0x3c/0x1f0
tcp_data_ready+0x9c/0xe4
tcp_data_queue+0xf6c/0x12d0
tcp_rcv_established+0x52c/0x798 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma: Add missing locking
Recent kernels complain about a missing lock in k3-udma.c when the lock
validator is enabled:
[ 4.128073] WARNING: CPU: 0 PID: 746 at drivers/dma/ti/../virt-dma.h:169 udma_start.isra.0+0x34/0x238
[ 4.137352] CPU: 0 UID: 0 PID: 746 Comm: kworker/0:3 Not tainted 6.12.9-arm64 #28
[ 4.144867] Hardware name: pp-v12 (DT)
[ 4.148648] Workqueue: events udma_check_tx_completion
[ 4.153841] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 4.160834] pc : udma_start.isra.0+0x34/0x238
[ 4.165227] lr : udma_start.isra.0+0x30/0x238
[ 4.169618] sp : ffffffc083cabcf0
[ 4.172963] x29: ffffffc083cabcf0 x28: 0000000000000000 x27: ffffff800001b005
[ 4.180167] x26: ffffffc0812f0000 x25: 0000000000000000 x24: 0000000000000000
[ 4.187370] x23: 0000000000000001 x22: 00000000e21eabe9 x21: ffffff8000fa0670
[ 4.194571] x20: ffffff8001b6bf00 x19: ffffff8000fa0430 x18: ffffffc083b95030
[ 4.201773] x17: 0000000000000000 x16: 00000000f0000000 x15: 0000000000000048
[ 4.208976] x14: 0000000000000048 x13: 0000000000000000 x12: 0000000000000001
[ 4.216179] x11: ffffffc08151a240 x10: 0000000000003ea1 x9 : ffffffc08046ab68
[ 4.223381] x8 : ffffffc083cabac0 x7 : ffffffc081df3718 x6 : 0000000000029fc8
[ 4.230583] x5 : ffffffc0817ee6d8 x4 : 0000000000000bc0 x3 : 0000000000000000
[ 4.237784] x2 : 0000000000000000 x1 : 00000000001fffff x0 : 0000000000000000
[ 4.244986] Call trace:
[ 4.247463] udma_start.isra.0+0x34/0x238
[ 4.251509] udma_check_tx_completion+0xd0/0xdc
[ 4.256076] process_one_work+0x244/0x3fc
[ 4.260129] process_scheduled_works+0x6c/0x74
[ 4.264610] worker_thread+0x150/0x1dc
[ 4.268398] kthread+0xd8/0xe8
[ 4.271492] ret_from_fork+0x10/0x20
[ 4.275107] irq event stamp: 220
[ 4.278363] hardirqs last enabled at (219): [<ffffffc080a27c7c>] _raw_spin_unlock_irq+0x38/0x50
[ 4.287183] hardirqs last disabled at (220): [<ffffffc080a1c154>] el1_dbg+0x24/0x50
[ 4.294879] softirqs last enabled at (182): [<ffffffc080037e68>] handle_softirqs+0x1c0/0x3cc
[ 4.303437] softirqs last disabled at (177): [<ffffffc080010170>] __do_softirq+0x1c/0x28
[ 4.311559] ---[ end trace 0000000000000000 ]---
This commit adds the missing locking. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: add missing rcu read protection for procfs content
When the procfs content is generated for a bcm_op which is in the process
to be removed the procfs output might show unreliable data (UAF).
As the removal of bcm_op's is already implemented with rcu handling this
patch adds the missing rcu_read_lock() and makes sure the list entries
are properly removed under rcu protection. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent out-of-bounds stream writes by validating *pos
ksmbd_vfs_stream_write() did not validate whether the write offset
(*pos) was within the bounds of the existing stream data length (v_len).
If *pos was greater than or equal to v_len, this could lead to an
out-of-bounds memory write.
This patch adds a check to ensure *pos is less than v_len before
proceeding. If the condition fails, -EINVAL is returned. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: adjust subpage bit start based on sectorsize
When running machines with 64k page size and a 16k nodesize we started
seeing tree log corruption in production. This turned out to be because
we were not writing out dirty blocks sometimes, so this in fact affects
all metadata writes.
When writing out a subpage EB we scan the subpage bitmap for a dirty
range. If the range isn't dirty we do
bit_start++;
to move onto the next bit. The problem is the bitmap is based on the
number of sectors that an EB has. So in this case, we have a 64k
pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4
bits for every node. With a 64k page size we end up with 4 nodes per
page.
To make this easier this is how everything looks
[0 16k 32k 48k ] logical address
[0 4 8 12 ] radix tree offset
[ 64k page ] folio
[ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers
[ | | | | | | | | | | | | | | | | ] bitmap
Now we use all of our addressing based on fs_info->sectorsize_bits, so
as you can see the above our 16k eb->start turns into radix entry 4.
When we find a dirty range for our eb, we correctly do bit_start +=
sectors_per_node, because if we start at bit 0, the next bit for the
next eb is 4, to correspond to eb->start 16k.
However if our range is clean, we will do bit_start++, which will now
put us offset from our radix tree entries.
In our case, assume that the first time we check the bitmap the block is
not dirty, we increment bit_start so now it == 1, and then we loop
around and check again. This time it is dirty, and we go to find that
start using the following equation
start = folio_start + bit_start * fs_info->sectorsize;
so in the case above, eb->start 0 is now dirty, and we calculate start
as
0 + 1 * fs_info->sectorsize = 4096
4096 >> 12 = 1
Now we're looking up the radix tree for 1, and we won't find an eb.
What's worse is now we're using bit_start == 1, so we do bit_start +=
sectors_per_node, which is now 5. If that eb is dirty we will run into
the same thing, we will look at an offset that is not populated in the
radix tree, and now we're skipping the writeout of dirty extent buffers.
The best fix for this is to not use sectorsize_bits to address nodes,
but that's a larger change. Since this is a fs corruption problem fix
it simply by always using sectors_per_node to increment the start bit. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:
root@rb1:~# gpiomon -c gpiochip1 10
irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
Unable to handle kernel paging request at virtual address ffff8000a1dc3820
Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
pc : mpm_set_type+0x80/0xcc
lr : mpm_set_type+0x5c/0xcc
Call trace:
mpm_set_type+0x80/0xcc (P)
qcom_mpm_set_type+0x64/0x158
irq_chip_set_type_parent+0x20/0x38
msm_gpio_irq_set_type+0x50/0x530
__irq_set_trigger+0x60/0x184
__setup_irq+0x304/0x6bc
request_threaded_irq+0xc8/0x19c
edge_detector_setup+0x260/0x364
linereq_create+0x420/0x5a8
gpio_ioctl+0x2d4/0x6c0
Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs. |
| In the Linux kernel, the following vulnerability has been resolved:
9p/net: fix improper handling of bogus negative read/write replies
In p9_client_write() and p9_client_read_once(), if the server
incorrectly replies with success but a negative write/read count then we
would consider written (negative) <= rsize (positive) because both
variables were signed.
Make variables unsigned to avoid this problem.
The reproducer linked below now fails with the following error instead
of a null pointer deref:
9pnet: bogus RWRITE count (4294967295 > 3) |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: decrease sc_count directly if fail to queue dl_recall
A deadlock warning occurred when invoking nfs4_put_stid following a failed
dl_recall queue operation:
T1 T2
nfs4_laundromat
nfs4_get_client_reaplist
nfs4_anylock_blockers
__break_lease
spin_lock // ctx->flc_lock
spin_lock // clp->cl_lock
nfs4_lockowner_has_blockers
locks_owner_has_blockers
spin_lock // flctx->flc_lock
nfsd_break_deleg_cb
nfsd_break_one_deleg
nfs4_put_stid
refcount_dec_and_lock
spin_lock // clp->cl_lock
When a file is opened, an nfs4_delegation is allocated with sc_count
initialized to 1, and the file_lease holds a reference to the delegation.
The file_lease is then associated with the file through kernel_setlease.
The disassociation is performed in nfsd4_delegreturn via the following
call chain:
nfsd4_delegreturn --> destroy_delegation --> destroy_unhashed_deleg -->
nfs4_unlock_deleg_lease --> kernel_setlease --> generic_delete_lease
The corresponding sc_count reference will be released after this
disassociation.
Since nfsd_break_one_deleg executes while holding the flc_lock, the
disassociation process becomes blocked when attempting to acquire flc_lock
in generic_delete_lease. This means:
1) sc_count in nfsd_break_one_deleg will not be decremented to 0;
2) The nfs4_put_stid called by nfsd_break_one_deleg will not attempt to
acquire cl_lock;
3) Consequently, no deadlock condition is created.
Given that sc_count in nfsd_break_one_deleg remains non-zero, we can
safely perform refcount_dec on sc_count directly. This approach
effectively avoids triggering deadlock warnings. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Tear down vGIC on failed vCPU creation
If kvm_arch_vcpu_create() fails to share the vCPU page with the
hypervisor, we propagate the error back to the ioctl but leave the
vGIC vCPU data initialised. Note only does this leak the corresponding
memory when the vCPU is destroyed but it can also lead to use-after-free
if the redistributor device handling tries to walk into the vCPU.
Add the missing cleanup to kvm_arch_vcpu_create(), ensuring that the
vGIC vCPU structures are destroyed on error. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: prime: fix ttm_bo_delayed_delete oops
Fix an oops in ttm_bo_delayed_delete which results from dererencing a
dangling pointer:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b7b: 0000 [#1] PREEMPT SMP
CPU: 4 UID: 0 PID: 1082 Comm: kworker/u65:2 Not tainted 6.14.0-rc4-00267-g505460b44513-dirty #216
Hardware name: LENOVO 82N6/LNVNB161216, BIOS GKCN65WW 01/16/2024
Workqueue: ttm ttm_bo_delayed_delete [ttm]
RIP: 0010:dma_resv_iter_first_unlocked+0x55/0x290
Code: 31 f6 48 c7 c7 00 2b fa aa e8 97 bd 52 ff e8 a2 c1 53 00 5a 85 c0 74 48 e9 88 01 00 00 4c 89 63 20 4d 85 e4 0f 84 30 01 00 00 <41> 8b 44 24 10 c6 43 2c 01 48 89 df 89 43 28 e8 97 fd ff ff 4c 8b
RSP: 0018:ffffbf9383473d60 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffffbf9383473d88 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffbf9383473d78 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 6b6b6b6b6b6b6b6b
R13: ffffa003bbf78580 R14: ffffa003a6728040 R15: 00000000000383cc
FS: 0000000000000000(0000) GS:ffffa00991c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000758348024dd0 CR3: 000000012c259000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die_body.cold+0x19/0x26
? die_addr+0x3d/0x70
? exc_general_protection+0x159/0x460
? asm_exc_general_protection+0x27/0x30
? dma_resv_iter_first_unlocked+0x55/0x290
dma_resv_wait_timeout+0x56/0x100
ttm_bo_delayed_delete+0x69/0xb0 [ttm]
process_one_work+0x217/0x5c0
worker_thread+0x1c8/0x3d0
? apply_wqattrs_cleanup.part.0+0xc0/0xc0
kthread+0x10b/0x240
? kthreads_online_cpu+0x140/0x140
ret_from_fork+0x40/0x70
? kthreads_online_cpu+0x140/0x140
ret_from_fork_asm+0x11/0x20
</TASK>
The cause of this is:
- drm_prime_gem_destroy calls dma_buf_put(dma_buf) which releases the
reference to the shared dma_buf. The reference count is 0, so the
dma_buf is destroyed, which in turn decrements the corresponding
amdgpu_bo reference count to 0, and the amdgpu_bo is destroyed -
calling drm_gem_object_release then dma_resv_fini (which destroys the
reservation object), then finally freeing the amdgpu_bo.
- nouveau_bo obj->bo.base.resv is now a dangling pointer to the memory
formerly allocated to the amdgpu_bo.
- nouveau_gem_object_del calls ttm_bo_put(&nvbo->bo) which calls
ttm_bo_release, which schedules ttm_bo_delayed_delete.
- ttm_bo_delayed_delete runs and dereferences the dangling resv pointer,
resulting in a general protection fault.
Fix this by moving the drm_prime_gem_destroy call from
nouveau_gem_object_del to nouveau_bo_del_ttm. This ensures that it will
be run after ttm_bo_delayed_delete. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ppp: Add bound checking for skb data on ppp_sync_txmung
Ensure we have enough data in linear buffer from skb before accessing
initial bytes. This prevents potential out-of-bounds accesses
when processing short packets.
When ppp_sync_txmung receives an incoming package with an empty
payload:
(remote) gef➤ p *(struct pppoe_hdr *) (skb->head + skb->network_header)
$18 = {
type = 0x1,
ver = 0x1,
code = 0x0,
sid = 0x2,
length = 0x0,
tag = 0xffff8880371cdb96
}
from the skb struct (trimmed)
tail = 0x16,
end = 0x140,
head = 0xffff88803346f400 "4",
data = 0xffff88803346f416 ":\377",
truesize = 0x380,
len = 0x0,
data_len = 0x0,
mac_len = 0xe,
hdr_len = 0x0,
it is not safe to access data[2].
[pabeni@redhat.com: fixed subj typo] |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: Prevent copying of nlink with value 0 from disk inode
syzbot report a deadlock in diFree. [1]
When calling "ioctl$LOOP_SET_STATUS64", the offset value passed in is 4,
which does not match the mounted loop device, causing the mapping of the
mounted loop device to be invalidated.
When creating the directory and creating the inode of iag in diReadSpecial(),
read the page of fixed disk inode (AIT) in raw mode in read_metapage(), the
metapage data it returns is corrupted, which causes the nlink value of 0 to be
assigned to the iag inode when executing copy_from_dinode(), which ultimately
causes a deadlock when entering diFree().
To avoid this, first check the nlink value of dinode before setting iag inode.
[1]
WARNING: possible recursive locking detected
6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Not tainted
--------------------------------------------
syz-executor301/5309 is trying to acquire lock:
ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889
but task is already holding lock:
ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(imap->im_aglock[index]));
lock(&(imap->im_aglock[index]));
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by syz-executor301/5309:
#0: ffff8880422a4420 (sb_writers#9){.+.+}-{0:0}, at: mnt_want_write+0x3f/0x90 fs/namespace.c:515
#1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: inode_lock_nested include/linux/fs.h:850 [inline]
#1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: filename_create+0x260/0x540 fs/namei.c:4026
#2: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630
#3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2460 [inline]
#3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
#3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocAG+0x4b7/0x1e50 fs/jfs/jfs_imap.c:1669
#4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2477 [inline]
#4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
#4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocAG+0x869/0x1e50 fs/jfs/jfs_imap.c:1669
stack backtrace:
CPU: 0 UID: 0 PID: 5309 Comm: syz-executor301 Not tainted 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3037
check_deadlock kernel/locking/lockdep.c:3089 [inline]
validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3891
__lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
__mutex_lock_common kernel/locking/mutex.c:608 [inline]
__mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752
diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889
jfs_evict_inode+0x32d/0x440 fs/jfs/inode.c:156
evict+0x4e8/0x9b0 fs/inode.c:725
diFreeSpecial fs/jfs/jfs_imap.c:552 [inline]
duplicateIXtree+0x3c6/0x550 fs/jfs/jfs_imap.c:3022
diNewIAG fs/jfs/jfs_imap.c:2597 [inline]
diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
diAllocAG+0x17dc/0x1e50 fs/jfs/jfs_imap.c:1669
diAlloc+0x1d2/0x1630 fs/jfs/jfs_imap.c:1590
ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56
jfs_mkdir+0x1c5/0xba0 fs/jfs/namei.c:225
vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
do_mkdirat+0x264/0x3a0 fs/namei.c:4280
__do_sys_mkdirat fs/namei.c:4295 [inline]
__se_sys_mkdirat fs/namei.c:4293 [inline]
__x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
do_syscall_x64 arch/x86/en
---truncated--- |
