| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-bounds write in Windows EAPHost Service allows an authorized attacker to elevate privileges locally. |
| PraisonAI versions before 4.6.78 contain an allowlist bypass vulnerability in shell command execution that allows attackers to execute restricted commands via find's built-in -exec, -execdir, and -delete actions. Attackers can craft find commands with these built-in actions to read blocked files, delete files, or execute non-allowlisted binaries without triggering shell metacharacter filters. |
| OS command injection in the npm package loading component in AWS jsii-diff before 1.131.0 might allow context-dependent attackers to execute arbitrary commands via crafted package specifiers passed to the npm: source argument.
To mitigate this issue, users should upgrade to jsii-diff v1.131.0 or later. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix out-of-bounds write in reset_per_cpu_data()
In reset_per_cpu_data(), al is computed as:
al = sizeof(struct net_dm_alert_msg);
al += dm_hit_limit * sizeof(struct net_dm_drop_point);
al += sizeof(struct nlattr);
skb = genlmsg_new(al, GFP_KERNEL);
...
nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg));
...
msg = nla_data(nla);
memset(msg, 0, al);
Because al includes sizeof(struct nlattr) (the 4-byte attribute header),
genlmsg_new() allocates al bytes of tailroom starting at nla.
However, msg points to nla_data(nla), which is located
sizeof(struct nlattr) bytes past nla. Calling memset(msg, 0, al)
therefore writes al bytes starting from msg, exceeding the allocated
buffer by sizeof(struct nlattr) (4 bytes) and corrupting
skb_shared_info.
Fix this by letting al represent only the payload length, allocating
the skb with genlmsg_new(nla_total_size(al), GFP_KERNEL), and zeroing
al bytes from msg. |
| Google Turbinia allows arbitrary command execution via worker tasks. An attacker with privileges to submit a processing request or influence an evidence path/name obtains code execution on the worker fleet. Fixed on 2026-07-10. |
| A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid ProtonJ2: through 1.1.0.
Users are recommended to upgrade to version 1.2.0, which fixes the issue. |
| UpSnap is a wake on lan web app. Versions prior to 5.4.0 have an OS command injection vulnerability in the UpSnap’s device management functionality due to the presence of unsafe shell command template interpolation using the ip and the mac fields. User-controlled values can be inserted into the wake_cmd and shutdown_cmd templates and executed via /bin/sh -c (Linux) or cmd /C (Windows) without sanitization, resulting in an authenticated Remote Code Execution (RCE). A low-privileged user with permission to create or edit devices can execute arbitrary operating system commands on the UpSnap hosted server. Version 5.4.0 patches the issue. |
| D-Link DWR-M961 devices with hardware version C1 and software version 1.1.2_C1_202602110044 contain a command injection vulnerability in the app.cgi interface. A remote attacker can inject arbitrary malicious commands into the netDig.ping.dst field, resulting in command execution with root privileges. |
| D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formDebugDiagnosticRun interface. A remote attacker can inject arbitrary malicious commands into the host field, resulting in command execution with root privileges. |
| Shescape is a simple shell escape library for JavaScript. Prior to 2.1.14 and 3.0.1, getEscapeFunction in src/internal/win/cmd.js does not escape `(` and `)` when applications use the escape or escapeAll APIs on Windows with shell set to cmd.exe, or with shell set to true when CMD is the default. An attacker-controlled argument can break out of a parenthesized CMD construct and inject shell syntax depending on the original command, resulting in arbitrary command execution. This issue is fixed in versions 2.1.14 and 3.0.1. |
| D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formNtp interface. A remote attacker can inject arbitrary malicious commands into the ntpServerIp1 field, resulting in command execution with root privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: bound the logical key offset from persistent memory
cache_key_decode() takes a key's logical off from the cache device and
later indexes req_key_tree->subtrees[] by it in get_subtree(). An off
past the device forms a subtree pointer outside the array, which
rb_insert() writes through during replay.
Reject a key of zero length, or whose off+len (computed in 64 bits)
exceeds the device size, before it is used. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: do not let ipv6_find_hdr() return an offset past the packet end
ipv6_find_hdr() walks the extension header chain, skipping each header by
the length that header itself declares. ipv6_optlen() returns up to 2048,
and the skip is never checked against skb->len, so the offset stored in
*offset can point past the end of the packet.
openvswitch installs that offset as the transport header, and
update_ipv6_checksum() then reads and writes the transport checksum field
out of bounds:
BUG: KASAN: slab-use-after-free in inet_proto_csum_replace16+0x445/0x470
Read of size 2 at addr ffff88810b754b06 by task ovs_ipv6_oob/629
CPU: 4 UID: 1000 PID: 629 Comm: ovs_ipv6_oob Tainted: G N 7.3.0-rc3+ #348
Call Trace:
inet_proto_csum_replace16+0x445/0x470
set_ipv6_addr+0x3dd/0x460
do_execute_actions+0x6a3d/0x7c40
ovs_execute_actions+0xfd/0x480
ovs_packet_cmd_execute+0xc38/0xf20
genl_rcv_msg+0x59e/0x870
netlink_rcv_skb+0x18b/0x450
genl_rcv+0x2d/0x40
netlink_unicast+0x6bc/0xa20
The buggy address belongs to the object at ffff88810b754980
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 390 bytes inside of
freed 704-byte region [ffff88810b754980, ffff88810b754c40)
Other callers use that offset too, so bound it here rather than in one
caller.
Reject a header whose declared length does not fit in the packet.
ipv6_find_hdr() already fails with -EBADMSG on a malformed chain, so this
adds no new failure mode. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/dmem: pin VRAM for the whole registered range
Commit c32287471077 ("gpu/drm/nouveau: enable THP support for GPU memory
migration") grew the device-private region that
nouveau_dmem_chunk_alloc() registers from DMEM_CHUNK_SIZE to
DMEM_CHUNK_SIZE * NR_CHUNKS, but left the VRAM buffer object backing that
region at DMEM_CHUNK_SIZE.
nouveau_dmem_page_addr() returns chunk->bo->offset plus the page's offset
within the registered region, so every page past the first chunk resolves
to VRAM outside the buffer object.
Size the buffer object to the region it backs. |
| Heap-based buffer overflow in the SOHM list-index deserialization code in HDF5 through 2.1.1 on all platforms allows attackers to cause a denial of service (crash) via a crafted HDF5 file whose shared-message list index declares a num_messages count exceeding list_max, triggering out-of-bounds heap reads and writes in H5SM__cache_list_deserialize and H5SM__cache_list_verify_chksum. |
| Netgate pfSense CE through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with Virtual IP edit privileges to execute commands as root by storing an unvalidated CARP VHID. Attackers can supply a VHID containing shell metacharacters that executes via interface_ipalias_configure() ifconfig calls or get_carp_interface_status() when CARP status is rendered. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: bound TX aggregation to MAX_TX_BUF_SIZE
__hif_usb_tx() dequeues up to MAX_TX_AGGR_NUM (20) frames into a
single tx_buf of MAX_TX_BUF_SIZE (32768) bytes, limiting the batch
by record count but never by cumulative byte length.
With large frames (MTU 2304), 20 aggregated frames of 2292 bytes
each exceed the allocation (20 * 2296 = 45920 bytes), so the
memcpy() in the loop writes up to 13152 bytes past tx_buf->buf
before usb_submit_urb().
Peek the queue head and stop before copying any record that would
cross MAX_TX_BUF_SIZE, then dispatch the current batch. Leftover
skbs remain queued and are drained on the next URB completion.
The byte bound changes the loop's exit semantics: it can now exit
before i == tx_skb_cnt - 1. Stock only finalized tx_buf->len on
that last index (len += offset), so an early break would submit a
URB holding only the last record's length while every dequeued skb
is freed on completion, silently dropping frames. Make tx_buf->len
a running total and advance tx_buf->offset per record instead; the
stride round_up(nskb->len + 4, 4) is identical to the stock stride
when the loop runs to completion.
Tested on hardware with an MTU 2304 flood: the loop stops at
record 15 (len = 32144, offset = 32144, within 32768), no
oversized URB is submitted, and MTU 1500 pings pass 20/20. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: ac100: Assign .num before accessing .hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero.
This occurs in ac100_rtc_register_clks() due to .num being assigned only
after every clkout clock has been stored in .hws[]. With
CONFIG_UBSAN_BOUNDS and a compiler that implements __counted_by (GCC
15.1+ or Clang 20.1+), this triggers an array-index-out-of-bounds report
during probe, and with CONFIG_UBSAN_TRAP the first store traps.
Initialize .num with AC100_CLKOUT_NUM, the number of elements .hws[] was
allocated with, right after the allocation. That is the value the loop
counter ends up at on the success path anyway, so the provider's
behaviour is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
net: systemport: Fix buffer overflow in bcm_sysport_get_stats()
When running on SYSTEMPORT Lite, certain statistics are unsupported and
skipped during bcm_sysport_get_stats(). The variable 'j' tracks the
compacted index into the destination data buffer, whereas 'i' iterates
over all elements in bcm_sysport_gstrings_stats.
Because the buffer allocated by ethtool is sized only according to
bcm_sysport_get_sset_count(), storing values at data[i] instead of
data[j] writes past the allocated array bounds, leading to memory
corruption.
Fix this by writing to data[j] instead of data[i]. |
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, the TIFF CCITT Group 3 encoder allocates an undersized compressed-data buffer for narrow 1-bit images. TiffCcittCompressor.Initialize does not reserve enough space for the row data and T4 end-of-line codes, and T4BitCompressor.CompressStrip reaches unchecked writes when TiffCompression.CcittGroup3Fax is selected directly or inherited from decoded TIFF metadata. An attacker-controlled encode or decode-and-re-encode flow can write beyond the logical output span, corrupt process memory, and terminate the process. This issue is fixed in version 4.1.2. |
