| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ionic: bound node_desc sysfs read with %.64s
node_desc[64] in struct ib_device is not guaranteed to be NUL-
terminated. The core IB sysfs handler uses "%.64s" for exactly this
reason (drivers/infiniband/core/sysfs.c:1307), since node_desc_store()
performs a raw memcpy of up to IB_DEVICE_NODE_DESC_MAX bytes with no NUL
termination:
memcpy(desc.node_desc, buf, min_t(int, count, IB_DEVICE_NODE_DESC_MAX));
If exactly 64 bytes are written via the node_desc sysfs file, the array
contains no NUL byte. The ionic hca_type_show() handler uses unbounded
"%s" and will read past the end of node_desc into adjacent fields of
struct ib_device until it encounters a NUL.
ionic supports IB_DEVICE_MODIFY_NODE_DESC, so this is triggerable by
userspace.
Match the core handler and bound the format specifier. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Improve validation and configuration of ACR masks
Currently there are several issues on the user space ACR mask validation
and configuration.
- The validation for user space ACR mask (attr.config2) is incomplete,
e.g., the ACR mask could include the index which belongs to another
ACR events group, but it's not validated.
- An early return on an invalid ACR mask caused all subsequent ACR groups
to be skipped.
- The stale hardware ACR mask (hw.config1) is not cleared before setting
new hardware ACR mask.
The following changes address all of the above issues.
- Figure out the event index group of an ACR group. Any bits in the
user-space mask not present in the index group are now dropped.
- Instead of an early return on invalid bits, drop only the invalid
portions and continue iterating through all ACR events to ensure full
configuration.
- Explicitly clear the stale hardware ACR mask for each event prior to
writing the new configuration.
Besides, a non-leader event member of ACR group could be disabled in
theory. This could cause bit-shifting errors in the acr_mask of remaining
group members. But since ACR sampling requires all events to be active,
this should not be a big concern in real use case. Add a "FIXME" comment
to notice this risk. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: fix avdcache auditing
The per-task avdcache was incorrectly saving and reusing the
audited vector computed by avc_audit_required() rather than
recomputing based on the currently requested permissions and
distinguishing the denied versus allowed cases. As a result,
some permission checks were not being audited, e.g.
directory write checks after a previously cached directory
search check.
[PM: line wrap tweaks] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: take vmap_purge_lock in shrinker
decay_va_pool_node() can be invoked concurrently from two paths:
__purge_vmap_area_lazy() when pools are being purged, and the shrinker via
vmap_node_shrink_scan().
However, decay_va_pool_node() is not safe to run concurrently, and the
shrinker path currently lacks serialization, leading to races and possible
leaks.
Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker
path to ensure serialization with purge users. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
iptfs_consume_frags() transfers paged fragments from one socket buffer
to another but fails to propagate the SKBFL_SHARED_FRAG flag. This is
the same class of bug that was fixed in skb_try_coalesce() for
CVE-2026-46300: when fragments backed by read-only page-cache pages are
merged, the marker indicating their shared nature must be preserved so
that ESP can decide correctly whether in-place encryption is safe.
Apply the same two-line fix used in skb_try_coalesce() to
iptfs_consume_frags(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: rds: clear i_sends on setup unwind
The RDS IB connection teardown path is written so it can run during
partial startup and on repeated shutdown attempts. It uses NULL
pointers to distinguish resources that are still owned from resources
that have already been released.
When rds_ib_setup_qp() fails after allocating i_sends but before
allocating i_recvs, the sends_out path frees i_sends without clearing
the pointer. A later shutdown pass can still treat that stale pointer
as a live send ring allocation.
Clear i_sends after vfree() in the error unwind path so the existing
shutdown logic continues to use the correct ownership state. |
| Access of resource using incompatible type ('type confusion') in .NET Core allows an unauthorized attacker to deny service over a network. |
| Allocation of resources without limits or throttling in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| IBM Langflow OSS 1.0.0 through 1.10.0 contain a critical remote code execution vulnerability in the code validation API endpoint. The POST /api/v1/validate/code endpoint accepts user-supplied Python code and executes it directly using Python's built-in exec() function without sandboxing, input validation, or privilege restrictions, enabling any authenticated user to execute arbitrary system commands with the full privileges of the Langflow server process. |
| openSIS Classic 9.3 contains an authenticated path traversal vulnerability in the legacy messaging sent-mail attachment download functionality that allows an authenticated attacker to read arbitrary files on the server via crafted path traversal sequences. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Set old handle to NULL before prime swap in change_handle
There was a potential race condition in change_handle. The ioctl
briefly had a single object with two idr entries; a concurrent
gem_close could delete the object and remove one of the handles
while leaving the other one dangling, which could subsequently
be dereferenced for a use-after-free.
To fix this, do the same dance that gem_close itself does.
(f6cd7daecff5 drm: Release driver references to handle before making it available again)
First idr_replace the old handle to NULL. Later, if the prime
operations are successful, actually close it.
create_tail required a similar dance to avoid a similar problem.
(bd46cece51a3 drm/gem: Fix race in drm_gem_handle_create_tail())
It idr_allocs the new handle with NULL, then swaps in the correct
object later to avoid races. We don't need to do that here, since
the only operations that could race are drm_prime, and
change_handle holds the prime lock for the entire duration.
v2: cleanups of error paths |
| Esri ArcGIS Server contains an unrestricted file upload vulnerability. An unauthenticated attacker could exploit this issue by uploading a crafted file to the affected endpoint. Successful exploitation could allow arbitrary file upload, potentially allowing for other attacks. This issue impacts all versions of ArcGIS Server on Windows and Linux 12.0 and prior. This issue does not impact ArcGIS Enterprise for Kubernetes. |
| Esri ArcGIS Server contains a directory traversal vulnerability. ArcGIS Enterprise on Kubernetes is not impacted. An unauthenticated attacker could exploit this issue by sending crafted path parameters. Successful exploitation could allow overwriting sensitive files on the system. Abuse of this issue can allow full administrative access to ArcGIS Server, with high impact to confidentiality, integrity, and availability. This issue impacts all versions of ArcGIS Server on Windows and Linux 12.0 and prior. This issue does not impact ArcGIS Enterprise for Kubernetes. |
| A Weak Password Recovery Mechanism for Forgotten Password exists in Esri Portal for ArcGIS versions 12.1 and earlier on Windows, Linux and Kubernetes. A remote, unauthorized attacker may assume ownership of a user’s account by manipulating this mechanism. ArcGIS Administrators should configure an email server with ArcGIS Enterprise to facilitate user self-service password recovery. The ability for an administrator to reset a user’s password remains unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Don't call fill_pool() in early boot hardirq context
When booting a debug PREEMPT_RT kernel on an ARM64 system, a "inconsistent
{HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage" lockdep warning message was
reported to the console.
During early boot, interrupts are enabled before the scheduler is
enabled. In this window (before SYSTEM_SCHEDULING is set) interrupts can
fire and in the hard interrupt context handler attempt to fill the pool
This can lead to a deadlock when the interrupt occurred when the interrupt
hits a region which holds a lock that is required to be taken in the
allocation path.
Add a new can_fill_pool() helper and reorder the exception rule and forbid
this scenario by excluding allocations from hard interrupt context. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: Fix NULL pointer dereference in rpmsg callback
A NULL pointer dereference was observed on Hawi at boot when the DSP
sends a glink message before fastrpc_rpmsg_probe() has completed
initialization:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000178
pc : _raw_spin_lock_irqsave+0x34/0x8c
lr : fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc]
...
Call trace:
_raw_spin_lock_irqsave+0x34/0x8c (P)
fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc]
qcom_glink_native_rx+0x538/0x6a4
qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem]
The faulting address 0x178 corresponds to the lock variable inside
struct fastrpc_channel_ctx, confirming that cctx is NULL when
fastrpc_rpmsg_callback() attempts to take the spinlock.
There are two issues here. First, dev_set_drvdata() is called before
spin_lock_init() and idr_init(), leaving a window where the callback
can retrieve a valid cctx pointer but operate on an uninitialized
spinlock. Second, the rpmsg channel becomes live as soon as the driver
is bound, so fastrpc_rpmsg_callback() can fire before dev_set_drvdata()
is called at all, resulting in dev_get_drvdata() returning NULL.
Fix both issues by moving all cctx initialization ahead of
dev_set_drvdata() so the structure is fully initialized before it
becomes visible to the callback, and add a NULL check in
fastrpc_rpmsg_callback() as a guard against any remaining window. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phonet: free phonet_device after RCU grace period
phonet_device_destroy() removes a phonet_device from the per-net device
list with list_del_rcu(), but frees it immediately. RCU readers walking
the same list can still hold a pointer to the object after it has been
removed, leading to a slab-use-after-free.
Use kfree_rcu(), matching the lifetime rule already used by
phonet_address_del() for the same object type. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Skip CSD when it has zeroed workgroups
A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2
registers. Kicking off a dispatch with a zero count in any of the three
dimensions is invalid. First, the hardware will process 0 as 65536,
while the user-space driver exposes a maximum of 65535. Over that, a
submission with a zeroed workgroup dimension should be a no-op.
These zeroed counts can reach the dispatch path through an indirect CSD
job, whose workgroup counts are only known once the indirect buffer is
read and may legitimately be zero, but such scenario should only result in
a no-op.
Overwrite the indirect CSD job workgroup counts with the indirect BO
ones, even if they are zeroed, and don't submit the job to the hardware
when any of the workgroup counts is zero, so the job completes immediately
instead of running the shader. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1780: fix PM runtime leak on error path
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails. |