| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject %p% format string in bprintf-like helpers
static const char fmt[] = "%p%";
bpf_trace_printk(fmt, sizeof(fmt));
The above BPF program isn't rejected and causes a kernel warning at
runtime:
Please remove unsupported %\x00 in format string
WARNING: CPU: 1 PID: 7244 at lib/vsprintf.c:2680 format_decode+0x49c/0x5d0
This happens because bpf_bprintf_prepare skips over the second %,
detected as punctuation, while processing %p. This patch fixes it by
not skipping over punctuation. %\x00 is then processed in the next
iteration and rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix oops due to non-existence of prealloc backlog struct
If an AF_RXRPC service socket is opened and bound, but calls are
preallocated, then rxrpc_alloc_incoming_call() will oops because the
rxrpc_backlog struct doesn't get allocated until the first preallocation is
made.
Fix this by returning NULL from rxrpc_alloc_incoming_call() if there is no
backlog struct. This will cause the incoming call to be aborted. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: prevent A-MSDU attacks in mesh networks
This patch is a mitigation to prevent the A-MSDU spoofing vulnerability
for mesh networks. The initial update to the IEEE 802.11 standard, in
response to the FragAttacks, missed this case (CVE-2025-27558). It can
be considered a variant of CVE-2020-24588 but for mesh networks.
This patch tries to detect if a standard MSDU was turned into an A-MSDU
by an adversary. This is done by parsing a received A-MSDU as a standard
MSDU, calculating the length of the Mesh Control header, and seeing if
the 6 bytes after this header equal the start of an rfc1042 header. If
equal, this is a strong indication of an ongoing attack attempt.
This defense was tested with mac80211_hwsim against a mesh network that
uses an empty Mesh Address Extension field, i.e., when four addresses
are used, and when using a 12-byte Mesh Address Extension field, i.e.,
when six addresses are used. Functionality of normal MSDUs and A-MSDUs
was also tested, and confirmed working, when using both an empty and
12-byte Mesh Address Extension field.
It was also tested with mac80211_hwsim that A-MSDU attacks in non-mesh
networks keep being detected and prevented.
Note that the vulnerability being patched, and the defense being
implemented, was also discussed in the following paper and in the
following IEEE 802.11 presentation:
https://papers.mathyvanhoef.com/wisec2025.pdf
https://mentor.ieee.org/802.11/dcn/25/11-25-0949-00-000m-a-msdu-mesh-spoof-protection.docx |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pf: Clear all LMTT pages on alloc
Our LMEM buffer objects are not cleared by default on alloc
and during VF provisioning we only setup LMTT PTEs for the
actually provisioned LMEM range. But beyond that valid range
we might leave some stale data that could either point to some
other VFs allocations or even to the PF pages.
Explicitly clear all new LMTT page to avoid the risk that a
malicious VF would try to exploit that gap.
While around add asserts to catch any undesired PTE overwrites
and low-level debug traces to track LMTT PT life-cycle.
(cherry picked from commit 3fae6918a3e27cce20ded2551f863fb05d4bef8d) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: discard erroneous disassoc frames on STA interface
When operating in concurrent STA/AP mode with host MLME enabled,
the firmware incorrectly sends disassociation frames to the STA
interface when clients disconnect from the AP interface.
This causes kernel warnings as the STA interface processes
disconnect events that don't apply to it:
[ 1303.240540] WARNING: CPU: 0 PID: 513 at net/wireless/mlme.c:141 cfg80211_process_disassoc+0x78/0xec [cfg80211]
[ 1303.250861] Modules linked in: 8021q garp stp mrp llc rfcomm bnep btnxpuart nls_iso8859_1 nls_cp437 onboard_us
[ 1303.327651] CPU: 0 UID: 0 PID: 513 Comm: kworker/u9:2 Not tainted 6.16.0-rc1+ #3 PREEMPT
[ 1303.335937] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT)
[ 1303.343588] Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex]
[ 1303.350856] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1303.357904] pc : cfg80211_process_disassoc+0x78/0xec [cfg80211]
[ 1303.364065] lr : cfg80211_process_disassoc+0x70/0xec [cfg80211]
[ 1303.370221] sp : ffff800083053be0
[ 1303.373590] x29: ffff800083053be0 x28: 0000000000000000 x27: 0000000000000000
[ 1303.380855] x26: 0000000000000000 x25: 00000000ffffffff x24: ffff000002c5b8ae
[ 1303.388120] x23: ffff000002c5b884 x22: 0000000000000001 x21: 0000000000000008
[ 1303.395382] x20: ffff000002c5b8ae x19: ffff0000064dd408 x18: 0000000000000006
[ 1303.402646] x17: 3a36333a61623a30 x16: 32206d6f72662063 x15: ffff800080bfe048
[ 1303.409910] x14: ffff000003625300 x13: 0000000000000001 x12: 0000000000000000
[ 1303.417173] x11: 0000000000000002 x10: ffff000003958600 x9 : ffff000003625300
[ 1303.424434] x8 : ffff00003fd9ef40 x7 : ffff0000039fc280 x6 : 0000000000000002
[ 1303.431695] x5 : ffff0000038976d4 x4 : 0000000000000000 x3 : 0000000000003186
[ 1303.438956] x2 : 000000004836ba20 x1 : 0000000000006986 x0 : 00000000d00479de
[ 1303.446221] Call trace:
[ 1303.448722] cfg80211_process_disassoc+0x78/0xec [cfg80211] (P)
[ 1303.454894] cfg80211_rx_mlme_mgmt+0x64/0xf8 [cfg80211]
[ 1303.460362] mwifiex_process_mgmt_packet+0x1ec/0x460 [mwifiex]
[ 1303.466380] mwifiex_process_sta_rx_packet+0x1bc/0x2a0 [mwifiex]
[ 1303.472573] mwifiex_handle_rx_packet+0xb4/0x13c [mwifiex]
[ 1303.478243] mwifiex_rx_work_queue+0x158/0x198 [mwifiex]
[ 1303.483734] process_one_work+0x14c/0x28c
[ 1303.487845] worker_thread+0x2cc/0x3d4
[ 1303.491680] kthread+0x12c/0x208
[ 1303.495014] ret_from_fork+0x10/0x20
Add validation in the STA receive path to verify that disassoc/deauth
frames originate from the connected AP. Frames that fail this check
are discarded early, preventing them from reaching the MLME layer and
triggering WARN_ON().
This filtering logic is similar with that used in the
ieee80211_rx_mgmt_disassoc() function in mac80211, which drops
disassoc frames that don't match the current BSSID
(!ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)), ensuring
only relevant frames are processed.
Tested on:
- 8997 with FW 16.68.1.p197 |
| In the Linux kernel, the following vulnerability has been resolved:
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
What we want is to verify there is that clone won't expose something
hidden by a mount we wouldn't be able to undo. "Wouldn't be able to undo"
may be a result of MNT_LOCKED on a child, but it may also come from
lacking admin rights in the userns of the namespace mount belongs to.
clone_private_mnt() checks the former, but not the latter.
There's a number of rather confusing CAP_SYS_ADMIN checks in various
userns during the mount, especially with the new mount API; they serve
different purposes and in case of clone_private_mnt() they usually,
but not always end up covering the missing check mentioned above. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Revert to requiring CAP_SYS_ADMIN for uprobes
Jann reports that uprobes can be used destructively when used in the
middle of an instruction. The kernel only verifies there is a valid
instruction at the requested offset, but due to variable instruction
length cannot determine if this is an instruction as seen by the
intended execution stream.
Additionally, Mark Rutland notes that on architectures that mix data
in the text segment (like arm64), a similar things can be done if the
data word is 'mistaken' for an instruction.
As such, require CAP_SYS_ADMIN for uprobes. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0. This bug triggers this warning
on a system with IOMMU enabled:
WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170
RIP: 0010:__iommu_dma_unmap+0x159/0x170
Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45
b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ff22d31181150c88 EFLAGS: 00010206
RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000
R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000
R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00
FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0
PKRU: 55555554
Call Trace:
<IRQ>
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? __iommu_dma_unmap+0x159/0x170
? report_bug+0x17e/0x1b0
? handle_bug+0x46/0x90
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? __iommu_dma_unmap+0x159/0x170
? __iommu_dma_unmap+0xb3/0x170
iommu_dma_unmap_page+0x4f/0x100
dma_unmap_page_attrs+0x52/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? xdp_return_frame+0x2e/0xd0
bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en]
__bnxt_poll_work_done+0x81/0x1e0 [bnxt_en]
bnxt_poll+0xd3/0x1e0 [bnxt_en] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: nfsd4_spo_must_allow() must check this is a v4 compound request
If the request being processed is not a v4 compound request, then
examining the cstate can have undefined results.
This patch adds a check that the rpc procedure being executed
(rq_procinfo) is the NFSPROC4_COMPOUND procedure. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix sample vs do_exit()
Baisheng Gao reported an ARM64 crash, which Mark decoded as being a
synchronous external abort -- most likely due to trying to access
MMIO in bad ways.
The crash further shows perf trying to do a user stack sample while in
exit_mmap()'s tlb_finish_mmu() -- i.e. while tearing down the address
space it is trying to access.
It turns out that we stop perf after we tear down the userspace mm; a
receipie for disaster, since perf likes to access userspace for
various reasons.
Flip this order by moving up where we stop perf in do_exit().
Additionally, harden PERF_SAMPLE_CALLCHAIN and PERF_SAMPLE_STACK_USER
to abort when the current task does not have an mm (exit_mm() makes
sure to set current->mm = NULL; before commencing with the actual
teardown). Such that CPU wide events don't trip on this same problem. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks
After retrieving WMI data blocks in sysfs callbacks, check for the
validity of them before dereferencing their content. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: Log an error when close_all_cached_dirs fails
Under low-memory conditions, close_all_cached_dirs() can't move the
dentries to a separate list to dput() them once the locks are dropped.
This will result in a "Dentry still in use" error, so add an error
message that makes it clear this is what happened:
[ 495.281119] CIFS: VFS: \\otters.example.com\share Out of memory while dropping dentries
[ 495.281595] ------------[ cut here ]------------
[ 495.281887] BUG: Dentry ffff888115531138{i=78,n=/} still in use (2) [unmount of cifs cifs]
[ 495.282391] WARNING: CPU: 1 PID: 2329 at fs/dcache.c:1536 umount_check+0xc8/0xf0
Also, bail out of looping through all tcons as soon as a single
allocation fails, since we're already in trouble, and kmalloc() attempts
for subseqeuent tcons are likely to fail just like the first one did. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix node corruption in ar->arvifs list
In current WLAN recovery code flow, ath11k_core_halt() only
reinitializes the "arvifs" list head. This will cause the
list node immediately following the list head to become an
invalid list node. Because the prev of that node still points
to the list head "arvifs", but the next of the list head "arvifs"
no longer points to that list node.
When a WLAN recovery occurs during the execution of a vif
removal, and it happens before the spin_lock_bh(&ar->data_lock)
in ath11k_mac_op_remove_interface(), list_del() will detect the
previously mentioned situation, thereby triggering a kernel panic.
The fix is to remove and reinitialize all vif list nodes from the
list head "arvifs" during WLAN halt. The reinitialization is to make
the list nodes valid, ensuring that the list_del() in
ath11k_mac_op_remove_interface() can execute normally.
Call trace:
__list_del_entry_valid_or_report+0xb8/0xd0
ath11k_mac_op_remove_interface+0xb0/0x27c [ath11k]
drv_remove_interface+0x48/0x194 [mac80211]
ieee80211_do_stop+0x6e0/0x844 [mac80211]
ieee80211_stop+0x44/0x17c [mac80211]
__dev_close_many+0xac/0x150
__dev_change_flags+0x194/0x234
dev_change_flags+0x24/0x6c
devinet_ioctl+0x3a0/0x670
inet_ioctl+0x200/0x248
sock_do_ioctl+0x60/0x118
sock_ioctl+0x274/0x35c
__arm64_sys_ioctl+0xac/0xf0
invoke_syscall+0x48/0x114
...
Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04591-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
This patch addresses below issues,
1. Active traffic on the leaf node must be stopped before its send queue
is reassigned to the parent. This patch resolves the issue by marking
the node as 'Inner'.
2. During a system reboot, the interface receives TC_HTB_LEAF_DEL
and TC_HTB_LEAF_DEL_LAST callbacks to delete its HTB queues.
In the case of TC_HTB_LEAF_DEL_LAST, although the same send queue
is reassigned to the parent, the current logic still attempts to update
the real number of queues, leadning to below warnings
New queues can't be registered after device unregistration.
WARNING: CPU: 0 PID: 6475 at net/core/net-sysfs.c:1714
netdev_queue_update_kobjects+0x1e4/0x200 |
| In the Linux kernel, the following vulnerability has been resolved:
net: drv: netdevsim: don't napi_complete() from netpoll
netdevsim supports netpoll. Make sure we don't call napi_complete()
from it, since it may not be scheduled. Breno reports hitting a
warning in napi_complete_done():
WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560
__napi_poll+0x2d8/0x3a0
handle_softirqs+0x1fe/0x710
This is presumably after netpoll stole the SCHED bit prematurely. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Prevent overflow in size calculation for memdup_user()
Number of apqn target list entries contained in 'nr_apqns' variable is
determined by userspace via an ioctl call so the result of the product in
calculation of size passed to memdup_user() may overflow.
In this case the actual size of the allocated area and the value
describing it won't be in sync leading to various types of unpredictable
behaviour later.
Use a proper memdup_array_user() helper which returns an error if an
overflow is detected. Note that it is different from when nr_apqns is
initially zero - that case is considered valid and should be handled in
subsequent pkey_handler implementations.
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix crash in wacom_aes_battery_handler()
Commit fd2a9b29dc9c ("HID: wacom: Remove AES power_supply after extended
inactivity") introduced wacom_aes_battery_handler() which is scheduled
as a delayed work (aes_battery_work).
In wacom_remove(), aes_battery_work is not canceled. Consequently, if
the device is removed while aes_battery_work is still pending, then hard
crashes or "Oops: general protection fault..." are experienced when
wacom_aes_battery_handler() is finally called. E.g., this happens with
built-in USB devices after resume from hibernate when aes_battery_work
was still pending at the time of hibernation.
So, take care to cancel aes_battery_work in wacom_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out
When both the RHBA and RPA FDMI requests time out, fnic reuses a frame to
send ABTS for each of them. On send completion, this causes an attempt to
free the same frame twice that leads to a crash.
Fix crash by allocating separate frames for RHBA and RPA, and modify ABTS
logic accordingly.
Tested by checking MDS for FDMI information.
Tested by using instrumented driver to:
- Drop PLOGI response
- Drop RHBA response
- Drop RPA response
- Drop RHBA and RPA response
- Drop PLOGI response + ABTS response
- Drop RHBA response + ABTS response
- Drop RPA response + ABTS response
- Drop RHBA and RPA response + ABTS response for both of them |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Restore context entry setup order for aliased devices
Commit 2031c469f816 ("iommu/vt-d: Add support for static identity domain")
changed the context entry setup during domain attachment from a
set-and-check policy to a clear-and-reset approach. This inadvertently
introduced a regression affecting PCI aliased devices behind PCIe-to-PCI
bridges.
Specifically, keyboard and touchpad stopped working on several Apple
Macbooks with below messages:
kernel: platform pxa2xx-spi.3: Adding to iommu group 20
kernel: input: Apple SPI Keyboard as
/devices/pci0000:00/0000:00:1e.3/pxa2xx-spi.3/spi_master/spi2/spi-APP000D:00/input/input0
kernel: DMAR: DRHD: handling fault status reg 3
kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr
0xffffa000 [fault reason 0x06] PTE Read access is not set
kernel: DMAR: DRHD: handling fault status reg 3
kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr
0xffffa000 [fault reason 0x06] PTE Read access is not set
kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00
kernel: DMAR: DRHD: handling fault status reg 3
kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr
0xffffa000 [fault reason 0x06] PTE Read access is not set
kernel: DMAR: DRHD: handling fault status reg 3
kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00
Fix this by restoring the previous context setup order. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/fpsimd: Avoid clobbering kernel FPSIMD state with SMSTOP
On system with SME, a thread's kernel FPSIMD state may be erroneously
clobbered during a context switch immediately after that state is
restored. Systems without SME are unaffected.
If the CPU happens to be in streaming SVE mode before a context switch
to a thread with kernel FPSIMD state, fpsimd_thread_switch() will
restore the kernel FPSIMD state using fpsimd_load_kernel_state() while
the CPU is still in streaming SVE mode. When fpsimd_thread_switch()
subsequently calls fpsimd_flush_cpu_state(), this will execute an
SMSTOP, causing an exit from streaming SVE mode. The exit from
streaming SVE mode will cause the hardware to reset a number of
FPSIMD/SVE/SME registers, clobbering the FPSIMD state.
Fix this by calling fpsimd_flush_cpu_state() before restoring the kernel
FPSIMD state. |
