| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in Windows Error Reporting allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows iSCSI allows an unauthorized attacker to execute code over a network. |
| Use after free in Windows Bluetooth Port Driver allows an unauthorized attacker to elevate privileges over an adjacent network. |
| Use after free in Windows Kernel allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Cryptographic Services allows an authorized attacker to execute code over a network. |
| Use after free in Windows TCP/IP allows an unauthorized attacker to execute code over a network. |
| Use after free in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| MariaDB server is a community developed fork of MySQL server. From 12.3.1 until 12.3.3 and 13.0.2, SYS_REFCURSOR handling is affected because cursor-array reallocation can leave stale references in routine contexts. A low-privileged attacker can open a large number of SYS_REFCURSORs and then fetch one to trigger a use-after-free that can enable remote code execution when combined with another vulnerability. This issue is fixed in versions 12.3.3 and 13.0.2. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: fix dma_free_coherent() pointer
dma_alloc_coherent() allocates a DMA mapped buffer and stores the
addresses in XXX_unaligned fields. Those should be reused when freeing
the buffer rather than the aligned addresses. |
| Vulnerability in the Oracle Outside In Technology product of Oracle Fusion Middleware (component: Outside In Clean Content SDK). The supported version that is affected is 8.5.8. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Outside In Technology. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Outside In Technology. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Reassign nested_mmus array behind mmu_lock
kvm->arch.nested_mmus[] is walked under kvm->mmu_lock, including from the
MMU notifier path (kvm_unmap_gfn_range() -> kvm_nested_s2_unmap()), which
can run at any time. kvm_vcpu_init_nested() reallocates the array and frees
the old buffer while holding only kvm->arch.config_lock, so such a walker
can reference the freed array.
Allocate the new array outside of mmu_lock, as the allocation can sleep.
Under the lock, copy the existing entries, fix up the back pointers and
reassign the array. Free the old buffer after dropping the lock, as
kvfree() can sleep as well. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: Only release RCU read lock after ct_ft
When looking up a flow table in act_ct in tcf_ct_flow_table_get(),
rhashtable_lookup_fast() internally opens and closes an RCU read critical
section before returning ct_ft.
The tcf_ct_flow_table_cleanup_work() can complete before refcount_inc_not_zero()
is invoked on the returned ct_ft resulting in a UAF on the already freed ct_ft
object. This vulnerability can lead to privilege escalation.
Analysis from zdi-disclosures@trendmicro.com:
When initializing act_ct, tcf_ct_init() is called, which internally triggers
tcf_ct_flow_table_get().
static int tcf_ct_flow_table_get(struct net *net, struct tcf_ct_params *params)
{
struct zones_ht_key key = { .net = net, .zone = params->zone };
struct tcf_ct_flow_table *ct_ft;
int err = -ENOMEM;
mutex_lock(&zones_mutex);
ct_ft = rhashtable_lookup_fast(&zones_ht, &key, zones_params); // [1]
if (ct_ft && refcount_inc_not_zero(&ct_ft->ref)) // [2]
goto out_unlock;
...
}
static __always_inline void *rhashtable_lookup_fast(
struct rhashtable *ht, const void *key,
const struct rhashtable_params params)
{
void *obj;
rcu_read_lock();
obj = rhashtable_lookup(ht, key, params);
rcu_read_unlock();
return obj;
}
At [1], rhashtable_lookup_fast() looks up and returns the corresponding ct_ft
from zones_ht . The lookup is performed within an RCU read critical section
through rcu_read_lock() / rcu_read_unlock(), which prevents the object from
being freed. However, at the point of function return, rcu_read_unlock() has
already been called, and there is nothing preventing ct_ft from being freed
before reaching refcount_inc_not_zero(&ct_ft->ref) at [2]. This interval becomes
the race window, during which ct_ft can be freed.
Free Process:
tcf_ct_flow_table_put() is executed through the path tcf_ct_cleanup() call_rcu()
tcf_ct_params_free_rcu() tcf_ct_params_free() tcf_ct_flow_table_put().
static void tcf_ct_flow_table_put(struct tcf_ct_flow_table *ct_ft)
{
if (refcount_dec_and_test(&ct_ft->ref)) {
rhashtable_remove_fast(&zones_ht, &ct_ft->node, zones_params);
INIT_RCU_WORK(&ct_ft->rwork, tcf_ct_flow_table_cleanup_work); // [3]
queue_rcu_work(act_ct_wq, &ct_ft->rwork);
}
}
At [3], tcf_ct_flow_table_cleanup_work() is scheduled as RCU work
static void tcf_ct_flow_table_cleanup_work(struct work_struct *work)
{
struct tcf_ct_flow_table *ct_ft;
struct flow_block *block;
ct_ft = container_of(to_rcu_work(work), struct tcf_ct_flow_table,
rwork);
nf_flow_table_free(&ct_ft->nf_ft);
block = &ct_ft->nf_ft.flow_block;
down_write(&ct_ft->nf_ft.flow_block_lock);
WARN_ON(!list_empty(&block->cb_list));
up_write(&ct_ft->nf_ft.flow_block_lock);
kfree(ct_ft); // [4]
module_put(THIS_MODULE);
}
tcf_ct_flow_table_cleanup_work() frees ct_ft at [4]. When this function executes
between [1] and [2], UAF occurs.
This race condition has a very short race window, making it generally
difficult to trigger. Therefore, to trigger the vulnerability an msleep(100) was
inserted after[1] |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: refill RX buffers before XDP or skb use
The RX error path returns the current descriptor buffer to the hardware
BM pool. That is only valid while the driver still owns the buffer.
mvpp2_rx_refill() can fail after the current buffer has been handed to
XDP or attached to an skb. In those cases mvpp2_run_xdp() may have
recycled, redirected, or queued the page for XDP_TX, and an skb free also
retires the data buffer. Returning such a buffer to BM lets hardware DMA
into memory that is no longer owned by the RX ring.
Refill the BM pool before handing the current buffer to XDP or to the
skb. If the allocation fails there, drop the packet and return the
still-owned current buffer to BM, preserving the pool depth. Once the
refill succeeds, later local drops retire/free the current buffer instead
of returning it to BM. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sit: reload inner IPv6 header after GSO offloads
ipip6_tunnel_xmit() caches the inner IPv6 header pointer at function
entry and continues using it after iptunnel_handle_offloads().
For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone().
When the skb header is cloned, skb_header_unclone() can call
pskb_expand_head(), which may move the skb head. The pskb_expand_head()
contract requires pointers into the skb header to be reloaded after the
call.
If the later skb_realloc_headroom() branch is not taken, SIT uses the
stale iph6 pointer to read the inner hop limit and DS field. That can
read from a freed skb head after the old head's remaining clone is
released.
Reload iph6 after the offload helper succeeds and before subsequent
reads from the inner IPv6 header. Keep the existing reload after
skb_realloc_headroom(), since that branch can also replace the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: release layout stid on setlease failure
nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via
idr_alloc_cyclic() under cl_lock before returning to
nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then
fails, the error path frees the layout stateid directly with
kmem_cache_free() without ever calling idr_remove(), leaving the
IDR slot pointing at freed slab memory. Any subsequent IDR walker
(states_show, client teardown) dereferences the dangling pointer.
The correct teardown for an IDR-published stid is nfs4_put_stid(),
which removes the IDR slot under cl_lock, dispatches sc_free
(nfsd4_free_layout_stateid) to release ls->ls_file via
nfsd4_close_layout(), and drops the nfs4_file reference in its
tail.
A second issue blocks that switch: nfsd4_free_layout_stateid()
unconditionally inspects ls->ls_fence_work via
delayed_work_pending() under ls_lock, but
INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only
after the setlease call. On the setlease-failure path the
destructor would touch an uninitialized delayed_work.
nfsd4_alloc_layout_stateid()
nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */
nfsd4_layout_setlease() /* fails */
nfs4_put_stid()
nfsd4_free_layout_stateid()
delayed_work_pending(&ls->ls_fence_work) /* needs INIT */
nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */
put_nfs4_file()
Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK
initialization above the nfsd4_layout_setlease() call, and replace
the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup
with a single nfs4_put_stid(stp). |
| Use after free in Accessibility in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| Use after free in Turbolev in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Windows Client License Service allows an authorized attacker to elevate privileges locally. |
| A Use After Free vulnerability in the rpd PIM Join/Prune processing of Juniper Networks Junos OS and Junos OS Evolved platforms allows an unauthenticated adjacent attacker to crash the routing daemon via specific PIM messages when sparse mode PIM is configured. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF due to concurrent consumption of ttrace lists in alloc_bulk
Syzkaller repeatedly triggered UAF splats related to nodes in
waiting_for_gp_ttrace within the bpf memalloc:
BUG: KASAN: slab-use-after-free in llist_del_first+0x85/0x110 lib/llist.c:61
Read of size 8 at addr ffff8881572cd080 by task syz.4.470/5112
...
llist_del_first+0x85/0x110 lib/llist.c:61
alloc_bulk+0x193/0x460 kernel/bpf/memalloc.c:229
bpf_mem_refill+0x386/0x560 kernel/bpf/memalloc.c:436
Freed by task 14:
...
__free_rcu kernel/bpf/memalloc.c:281 [inline]
__free_rcu_tasks_trace+0x48/0xd0 kernel/bpf/memalloc.c:291
rcu_tasks_invoke_cbs+0x1ec/0x3e0 kernel/rcu/tasks.h:571
rcu_tasks_one_gp+0x13d/0x220 kernel/rcu/tasks.h:621
rcu_tasks_kthread+0xf3/0x120 kernel/rcu/tasks.h:651
The reason is that the UAF occurs after the RCU Tasks Trace GP expires:
when the __free_rcu() callback runs, there is no synchronization
protecting llist_del_all() against concurrent alloc_bulk() operating on
waiting_for_gp_ttrace, leading to the race condition below:
CPU0 CPU1
__free_rcu (RCU Tasks Trace callback)
alloc_bulk
llist_del_first(&c->waiting_for_gp_ttrace)
entry = smp_load_acquire(&head->first);
do {
if (entry == NULL)
return NULL;
free_all(llist_del_all(&c->waiting_for_gp_ttrace))
llist_for_each_safe(pos, t, llnode)
free_one(pos);
next = READ_ONCE(entry->next); <-- trigger UAF
} while (!try_cmpxchg(&head->first, &entry, next));
In addition, there is also a theoretical race condition on the
free_by_rcu_ttrace list. This race requires two preconditions: an
in-flight Tasks Trace GP keeping c->call_rcu_ttrace_in_progress == 1,
and concurrent cross-CPU frees repopulating c->free_by_rcu_ttrace with
new nodes. Under these conditions, the following scenario triggers UAF:
// CPU0
// irq work is still busy (on PREEMPT_RT)
alloc_bulk()
llist_del_first(&c->free_by_rcu_ttrace)
entry = smp_load_acquire(&head->first);
do {
if (entry == NULL)
return NULL;
// CPU1
bpf_mem_alloc_destroy()
WRITE_ONCE(c->draining, true)
// wait for CPU0
irq_work_sync()
// CPU2
do_call_rcu_ttrace(tgt(CPU0))
if (c->draining) {
llist_del_all(&c->free_by_rcu_ttrace)
free_all()
}
// CPU0 continue
next = READ_ONCE(entry->next); <-- trigger UAF
while (!try_cmpxchg(&head->first, &entry, next));
Fix this by introducing a raw spinlock to synchronize the concurrent
consumption on waiting_for_gp_ttrace and free_by_rcu_ttrace. |
