| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In validateImageInfo of Bitmap.cpp, there is a possible out-of-bounds read due to a precondition check failure. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to bypass security restrictions to access and modify sensitive information due to improper restriction of security token assignment. |
| Out-of-bounds read for the Intel(R) VTune(TM) Profiler software before version 2026.0.0 within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| AMI APTIOV contains vulnerabilities in BIOS where
privileged users may cause the “Out-of-Bounds Read” by
local access. Successful exploitation of this vulnerability may lead to a
denial of service during firmware update processing, such as a crash or failed
update if the out-of-bounds read hits unmapped memory. It could also impact
Confidentiality, and Availability. |
| AMI APTIOV contains a vulnerability in BIOS
where a privileged
user may cause the “Out-of-Bound Read” by local
access. Successful exploitation of this vulnerability may lead to a denial of
service during firmware update processing, such as a crash or failed update if
the out-of-bounds read hits unmapped memory. It could also potentially impact Confidentiality and Availability. |
| rabbitmq-c is a C-language AMQP client library for RabbitMQ. Prior to version 0.17.0, the bounds check (*offset = o + len) <= encoded.len overflows when o + len > SIZE_MAX on 32-bit systems. len is a uint32_t read from the AMQP wire as a BYTES/UTF8 field length. The overflow wraps the check to a small value that passes, producing a decoded amqp_bytes_t with a multi-GB .len pointing into a small frame buffer. This results in an out-of-bounds read of up to ~4GB of process memory on 32-bit systems (ARM, MIPS, x86 ILP32, embedded IoT AMQP clients). Enabling information disclosure or denial of service. Not exploitable on 64-bit systems where size_t is 64-bit. This issue has been patched in version 0.17.0. |
| A out-of-bounds read vulnerability exists in the dr_mp3 drmp3_init_internal functionality of dr_libs (version(s): 0.7.3). A specially crafted .mp3 file can lead to an out-of-bounds read. An attacker can provide a malicious file to trigger this vulnerability. |
| Dimension is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an
empty supported client protocols buffer may cause a crash or memory contents to
be sent to the peer.
Impact summary: A buffer overread can have a range of potential consequences
such as unexpected application beahviour or a crash. In particular this issue
could result in up to 255 bytes of arbitrary private data from memory being sent
to the peer leading to a loss of confidentiality. However, only applications
that directly call the SSL_select_next_proto function with a 0 length list of
supported client protocols are affected by this issue. This would normally never
be a valid scenario and is typically not under attacker control but may occur by
accident in the case of a configuration or programming error in the calling
application.
The OpenSSL API function SSL_select_next_proto is typically used by TLS
applications that support ALPN (Application Layer Protocol Negotiation) or NPN
(Next Protocol Negotiation). NPN is older, was never standardised and
is deprecated in favour of ALPN. We believe that ALPN is significantly more
widely deployed than NPN. The SSL_select_next_proto function accepts a list of
protocols from the server and a list of protocols from the client and returns
the first protocol that appears in the server list that also appears in the
client list. In the case of no overlap between the two lists it returns the
first item in the client list. In either case it will signal whether an overlap
between the two lists was found. In the case where SSL_select_next_proto is
called with a zero length client list it fails to notice this condition and
returns the memory immediately following the client list pointer (and reports
that there was no overlap in the lists).
This function is typically called from a server side application callback for
ALPN or a client side application callback for NPN. In the case of ALPN the list
of protocols supplied by the client is guaranteed by libssl to never be zero in
length. The list of server protocols comes from the application and should never
normally be expected to be of zero length. In this case if the
SSL_select_next_proto function has been called as expected (with the list
supplied by the client passed in the client/client_len parameters), then the
application will not be vulnerable to this issue. If the application has
accidentally been configured with a zero length server list, and has
accidentally passed that zero length server list in the client/client_len
parameters, and has additionally failed to correctly handle a "no overlap"
response (which would normally result in a handshake failure in ALPN) then it
will be vulnerable to this problem.
In the case of NPN, the protocol permits the client to opportunistically select
a protocol when there is no overlap. OpenSSL returns the first client protocol
in the no overlap case in support of this. The list of client protocols comes
from the application and should never normally be expected to be of zero length.
However if the SSL_select_next_proto function is accidentally called with a
client_len of 0 then an invalid memory pointer will be returned instead. If the
application uses this output as the opportunistic protocol then the loss of
confidentiality will occur.
This issue has been assessed as Low severity because applications are most
likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not
widely used. It also requires an application configuration or programming error.
Finally, this issue would not typically be under attacker control making active
exploitation unlikely.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
Due to the low severity of this issue we are not issuing new releases of
OpenSSL at this time. The fix will be included in the next releases when they
become available. |
| Improper handling of NAS DLTransport messages may lead to a baseband crash. |
| Issue summary: The DTLS retransmission logic does not correctly handle
a handshake message write that is suspended part-way through.
The retransmitted message can be read past the message buffer and
the retransmission overwrites the internal state the suspended write
needs to resume correctly.
Impact summary: The retransmitted message can disclose a heap memory
to the peer as plaintext handshake data or cause a crash and a Denial
of Service when the read reaches an unmapped memory region.
CWE: CWE-125: Out-of-bounds Read
Description: DTLS handshake messages can be written out in multiple
fragments, and a write can suspend mid-message (returning WANT_WRITE)
if the underlying transport temporarily cannot accept more data. While
such a write is suspended, the DTLS retransmission timer may
independently fire and ask the retransmission logic to resend an
earlier, already-acknowledged-as-sent message from its retransmit
queue.
The retransmission logic reused the same internal buffer and position
tracking as the message that was still being written, without
resetting the position back to the start of the message being
retransmitted. As a result the retransmission was read starting from
wherever the suspended write had left off, producing a mislabelled
message whose body was leftover bytes from the other, larger message
still in flight - content that was never meant to be sent at that
point, and which could run past the end of the allocated buffer.
Separately, even when the retransmission is positioned correctly,
allowing it to run to completion while another write is suspended
overwrites the same shared bookkeeping that the suspended write
depends on to resume. When the application later resumes the
suspended write (via a subsequent SSL_read(), SSL_write(),
SSL_accept(), or SSL_connect() call), it finds that bookkeeping in a
state inconsistent with the message and aborts the process in
a debugging build.
The fix resets the retransmission's read position to the start of the
message before resending, and skips retransmission entirely whenever a
handshake write is still suspended, deferring to the next call that
resumes it instead.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| libexpat before commit 13c5f63 contains a heap buffer over-read vulnerability in xmlparse.c. XML_ParseBuffer advances the parse buffer end with parser->m_bufferEnd += len using a caller-supplied length that is not validated against the allocated buffer size, so repeated XML_ParseBuffer calls move m_bufferEnd past the end of the heap allocation and subsequent parsing reads out of bounds. Reaching this path requires a parse buffer to already be present; otherwise XML_ParseBuffer returns XML_ERROR_NO_BUFFER. A buffer is present after a prior call to XML_GetBuffer, either directly (the common case) or indirectly through a prior XML_Parse call that allocates the buffer internally. The over-read discloses adjacent heap memory to the calling application, recovering heap pointers, libc function pointers, and code pointers sufficient to defeat ASLR and build further exploitation primitives. |
| libexpat before 2.8.3 has an out-of-bounds read and resultant infinite loop because low surrogates are treated the same as high surrogates during Unicode processing in the *_toUtf16 functions. |
| libssh2 through 1.11.1, fixed in commit a13bb6c, contains a missing bounds check vulnerability that allows a malicious SSH server to trigger an arbitrary-length heap out-of-bounds read and a free of an uninitialized pointer via the publickey subsystem. In libssh2_publickey_list_fetch(), the version 1 response parser reads a server-controlled comment_len value and advances the parse pointer without verifying sufficient bytes remain in the buffer, causing the out-of-bounds read to leak heap pointers from adjacent allocations defeating ASLR, followed by heap allocator state corruption when the error cleanup path frees an uninitialized pointer from a non-zeroed realloc() region. |
| Perl versions before 5.40.5-RC1, from 5.41.0 before 5.42.3-RC1, from 5.43.0 before 5.43.11 have an integer overflow in S_measure_struct leading to an out-of-bounds heap read in pack and unpack.
S_measure_struct adds each item's size times its repeat count to a running total with no overflow check, so a large repeat count in a pack or unpack template wraps the signed SSize_t total negative. The @, X, and x position codes then guard their moves with a signed length comparison that passes when the length is negative, advancing the buffer pointer out of bounds.
A template derived from untrusted input can read heap memory past the buffer and return it to the caller. |
| Socket versions before 2.041 for Perl have an out-of-bounds heap read.
In Socket.xs, pack_ip_mreq_source() checks the length of its source argument before the argument is read, so the check tests the byte length carried over from the preceding multiaddr argument instead. Both addresses occupy a 4-byte field, so a valid multiaddr lets a source of any length pass the check, and the source is then copied into the 4-byte imr_sourceaddr field with a fixed-size copy. A source shorter than 4 bytes is not rejected, and the copy reads up to 3 bytes past the end of its buffer.
Calling pack_ip_mreq_source() with a source value shorter than 4 bytes copies adjacent heap memory into the returned packed structure. |
| libssh2 through 1.11.1, fixed in commit 2dae302, contains an out-of-bounds heap read vulnerability in the sftp_symlink() function in src/sftp.c that allows a malicious SSH server or man-in-the-middle attacker to disclose heap memory contents or cause a crash by sending a crafted SSH_FXP_NAME response. Attackers can supply a link_len value larger than the actual packet data in SSH_FXP_NAME responses for SFTP READLINK and REALPATH operations, triggering a heap buffer over-read of up to target_len minus one bytes due to the missing validation of available packet buffer size before the memcpy operation. |
| A flaw was found in GStreamer's gst-plugins-base RTCP SDES packet parser. A remote sender able to reach an active media session can supply a malformed SDES entry whose declared length exceeds the received packet. Missing bounds validation can cause the receiver to read beyond the packet buffer, potentially crashing the application or exposing a limited amount of process memory. |
| A vulnerability has been identified in Parasolid V38.0 (All versions < V38.0.235), Parasolid V38.1 (All versions < V38.1.230), Simcenter Femap (All versions < V2606.0002). The affected applications contains an out of bounds read vulnerability while parsing specially crafted X_T files. This could allow an attacker to execute code in the context of the current process. |
