| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Envoy is a cloud-native, open source edge and service proxy. Envoyproxy with a Brotli filter can get into an endless loop during decompression of Brotli data with extra input. |
| A flaw was found in m17n-lib. By providing crafted input containing an invalid UTF-8 character sequence, an attacker can cause the text parsing function to enter an infinite loop. This issue leads to sustained high CPU utilization, resulting in a Denial of Service (DoS) for the affected application. |
| Kyverno before 1.19.2 contains a denial of service vulnerability in substituteVariablesIfAny that allows low-privileged users to hang the admission webhook via self-referential variable templates. Attackers can create resources whose annotations re-introduce the embedded policy variable, causing unbounded substitution loops that exhaust CPU and memory and block cluster-wide admission. |
| A denial of service vulnerability was found in tipc_crypto_key_revoke in net/tipc/crypto.c in the Linux kernel’s TIPC subsystem. This flaw allows guests with local user privileges to trigger a deadlock and potentially crash the system. |
| A denial of service vulnerability due to a deadlock was found in sctp_auto_asconf_init in net/sctp/socket.c in the Linux kernel’s SCTP subsystem. This flaw allows guests with local user privileges to trigger a deadlock and potentially crash the system. |
| In the Linux kernel, the following vulnerability has been resolved:
pid_namespace: prevent TIF_NOTIFY_SIGNAL from interrupting the reaper
Since commit 7fea700e04bd ("zap_pid_ns_processes: clear
TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING") zap_pid_ns_processes()
clears TIF_NOTIFY_SIGNAL before every kernel_wait4() call. Otherwise
kernel_wait4() doesn't sleep and returns -ERESTARTSYS if
signal_pending() is true and the reaper busy-waits.
But clearing TIF_NOTIFY_SIGNAL doesn't fix it. It can get raised again.
For example, klp_send_signals() sets it raw against any task that hasn't
transitioned yet. And it keeps sending it until the livepatch finishes.
The sleep loop waiting for pid_allocated to drop has the same problem
and it doesn't even clear anything. So a schedule() in
TASK_INTERRUPTIBLE returns immediately.
Use a no_notify_signal guard. signal_pending() will ignore
TIF_NOTIFY_SIGNAL and the pid namespace reaper sleeps until a child
exits or free_pid() wakes it. |
| Tesseract is an open source OCR engine. Prior to 5.5.4, GENERIC_2D_ARRAY::DeSerializeSize in src/ccstruct/matrix.h reads matrix dimensions as signed int32_t values and compares them only with UINT16_MAX, allowing negative values to reach ResizeNoInit. Negative dimensions or a 65535 by 65535 product can create inconsistent allocation state and later out-of-bounds accesses while loading a crafted traineddata file, causing denial of service. This issue is fixed in version 5.5.4. |
| A flaw was identified in the RAR5 archive decompression logic of the libarchive library, specifically within the archive_read_data() processing path. When a specially crafted RAR5 archive is processed, the decompression routine may enter a state where internal logic prevents forward progress. This condition results in an infinite loop that continuously consumes CPU resources. Because the archive passes checksum validation and appears structurally valid, affected applications cannot detect the issue before processing. This can allow attackers to cause persistent denial-of-service conditions in services that automatically process archives. |
| Converting crafted BIG-HKSCS input to UCS-4 or the internal wide character encoding, for example with iconv, in the GNU C Library version 2.18 through 2.31 may result in the converter making no progress, causing the calling application to hang. |
| sngrep through 1.9.0 contains an infinite loop vulnerability in capture_packet_reasm_ip() in src/capture.c that allows attackers to cause denial of service via crafted NFLOG TLVs. Attackers can supply a pcap file with link type NFLOG containing a non-payload TLV with length under 4, making the capture thread spin at full CPU and stop processing packets. |
| A malicious X server could send malformed RECORD EnableContext reolies that can cause a X client using the parse_reply_call_callback function in libXtst before 1.2.6 to enter a endless loop. |
| In Eclipse ThreadX NetX Duo versions up to and including 6.5.2.202603, built with IPv6, the ICMPv6 option validator accepts an option area that ends in a one- or two-byte residue, and the Router Advertisement, Neighbor Solicitation, Neighbor Advertisement and Redirect handlers then walk it without length checks. A host on the local link can send one such message to make the IP thread read past the packet or loop forever, and can place off-packet memory in the neighbor cache. |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the PPP IPCP code parses a peer's Configure-Nak without validating each option's length. A malicious PPP peer can stall the PPP thread indefinitely with a zero-length option, taking the link down, and can read back up to four bytes of packet-buffer memory per exchange with a short address option. |
| CGI versions before 5.00 for Perl allow an infinite loop on a short request body when $DISABLE_UPLOADS is set.
When $CGI::PUTDATA_UPLOAD or an upload hook is set, read_postdata_putdata takes a request body that is not a form submission. With $CGI::DISABLE_UPLOADS set, it discards the body by reading until Content-Length bytes have arrived. Once a body shorter than its Content-Length runs out, every read returns 0, so the loop never ends.
A client can keep a server process spinning with one such request. |
| The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts. On the PL011, the framing, parity, break, and overrun error interrupts (PL011_IMSC_ERROR_MASK) are cleared only by writing the interrupt-clear register UARTICR; reading the data register clears the RX interrupt and the per-byte RSR status but not the error interrupt status in MIS. The interrupt service routine pl011_isr() acknowledged only the CTS modem-status interrupt and never wrote icr for the error bits, so an asserted error interrupt remains pending after the ISR returns.
When an application enables error-interrupt reporting via the public uart_irq_err_enable() API, an attacker who controls the serial peer can deterministically assert these error bits by injecting line errors on the RX line — a baud/stop-bit mismatch or mid-character break (framing/break error), a flipped parity bit (parity error), or FIFO flooding (overrun error). Because the error interrupt is never cleared, the interrupt line stays asserted and the CPU re-enters pl011_isr() immediately and indefinitely, producing an interrupt-storm livelock from which the core makes no forward progress.
The impact is an availability-only denial of service (permanent hang), reachable from an external or removable UART peer. Exploitation is gated by configuration: the error interrupt is off by default and no in-tree subsystem enables it, so only applications that explicitly call uart_irq_err_enable() on a PL011-based, interrupt-driven port are affected. The fix makes pl011_isr() acknowledge the pending error bits via uart->icr, breaking the loop, and additionally clears the latched RSR status in pl011_err_check(). |
| Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check.
Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated.
Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING.
IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4.
Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path). |
| The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior.
When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining the TX FIFO; pl011_fifo_fill() then returns 0 on every call while the application still has pending data and therefore never disables the TX interrupt. The loop condition never clears, so the thread that called uart_irq_tx_enable() (e.g. h4_send() in the Bluetooth HCI H4 driver) spins indefinitely, hanging the executing context and stalling the transport — a denial of service (CWE-835).
An attacker controlling the device attached to the UART's CTS line can trigger the hang by withholding CTS during transmission. Because that peer is the device wired to the UART — which may be a removable or external module (e.g. an off-board Bluetooth controller on the HCI H4 link) rather than a permanently-bonded on-PCB part — the attack vector is scored Adjacent (AV:A) rather than Physical; the security subcommittee should confirm the vector against the specific deployment. Impact is availability only; there is no memory-safety, confidentiality, or integrity consequence.
The vulnerable loop was introduced in commit b783bc8448ef (Feb 2025) and shipped in releases v4.1.0 through v4.4.0. The fix breaks out of the loop when CTS is blocking and arms the CTS modem-status interrupt to resume transmission when CTS re-asserts. |
| isomorphic-git is a pure JavaScript implementation of Git for Node.js and browsers. Prior to 1.38.6, isomorphic-git persists server-supplied circular symref= capabilities through updateRemoteRefs, and GitRefManager.resolve() follows the resulting loose symbolic references without a default depth limit or cycle detection. After a clone from a malicious or man-in-the-middle-controlled remote, operations such as log, status, checkout, and branch that resolve refs/remotes/origin/a or refs/remotes/origin/b do not terminate. The circular references remain on disk, leaving the repository unusable for the application and causing a persistent denial of service. This issue is fixed in version 1.38.6. |
| MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7, 3.4.5, and 3.5.11, the connector assumed result bytes were UTF-8 but guarded only changes to character_set_client. It did not reject non-UTF-8 character_set_results changes and relied on the server's global session_track_system_variables configuration to report character-set changes. A malicious or compromised server, or a machine-in-the-middle attacker, could suppress tracking or change the result charset so application strings differed from the returned bytes, potentially defeating application-side validation or escaping that depended on the decoded values. This issue is fixed in versions 3.3.7, 3.4.5, and 3.5.11. |
| FreeRDP before 3.32.2 contains a denial of service vulnerability in the shadow server that allows authenticated RDP clients to spin server threads by sending zero-length drdynvc DATA PDUs. Attackers can send empty DATA messages on opened audin or rdpgfx channels, so that FreeRDP_WTSVirtualChannelRead never consumes them, consuming full CPU cores until disconnect. |
