| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: tlb: Fix TLBI RANGE operand
KVM/arm64 relies on TLBI RANGE feature to flush TLBs when the dirty
pages are collected by VMM and the page table entries become write
protected during live migration. Unfortunately, the operand passed
to the TLBI RANGE instruction isn't correctly sorted out due to the
commit 117940aa6e5f ("KVM: arm64: Define kvm_tlb_flush_vmid_range()").
It leads to crash on the destination VM after live migration because
TLBs aren't flushed completely and some of the dirty pages are missed.
For example, I have a VM where 8GB memory is assigned, starting from
0x40000000 (1GB). Note that the host has 4KB as the base page size.
In the middile of migration, kvm_tlb_flush_vmid_range() is executed
to flush TLBs. It passes MAX_TLBI_RANGE_PAGES as the argument to
__kvm_tlb_flush_vmid_range() and __flush_s2_tlb_range_op(). SCALE#3
and NUM#31, corresponding to MAX_TLBI_RANGE_PAGES, isn't supported
by __TLBI_RANGE_NUM(). In this specific case, -1 has been returned
from __TLBI_RANGE_NUM() for SCALE#3/2/1/0 and rejected by the loop
in the __flush_tlb_range_op() until the variable @scale underflows
and becomes -9, 0xffff708000040000 is set as the operand. The operand
is wrong since it's sorted out by __TLBI_VADDR_RANGE() according to
invalid @scale and @num.
Fix it by extending __TLBI_RANGE_NUM() to support the combination of
SCALE#3 and NUM#31. With the changes, [-1 31] instead of [-1 30] can
be returned from the macro, meaning the TLBs for 0x200000 pages in the
above example can be flushed in one shoot with SCALE#3 and NUM#31. The
macro TLBI_RANGE_MASK is dropped since no one uses it any more. The
comments are also adjusted accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: fix overflow check in io_recvmsg_mshot_prep()
The "controllen" variable is type size_t (unsigned long). Casting it
to int could lead to an integer underflow.
The check_add_overflow() function considers the type of the destination
which is type int. If we add two positive values and the result cannot
fit in an integer then that's counted as an overflow.
However, if we cast "controllen" to an int and it turns negative, then
negative values *can* fit into an int type so there is no overflow.
Good: 100 + (unsigned long)-4 = 96 <-- overflow
Bad: 100 + (int)-4 = 96 <-- no overflow
I deleted the cast of the sizeof() as well. That's not a bug but the
cast is unnecessary. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Fix refcnt handling in __inet_hash_connect().
syzbot reported a warning in sk_nulls_del_node_init_rcu().
The commit 66b60b0c8c4a ("dccp/tcp: Unhash sk from ehash for tb2 alloc
failure after check_estalblished().") tried to fix an issue that an
unconnected socket occupies an ehash entry when bhash2 allocation fails.
In such a case, we need to revert changes done by check_established(),
which does not hold refcnt when inserting socket into ehash.
So, to revert the change, we need to __sk_nulls_add_node_rcu() instead
of sk_nulls_add_node_rcu().
Otherwise, sock_put() will cause refcnt underflow and leak the socket.
[0]:
WARNING: CPU: 0 PID: 23948 at include/net/sock.h:799 sk_nulls_del_node_init_rcu+0x166/0x1a0 include/net/sock.h:799
Modules linked in:
CPU: 0 PID: 23948 Comm: syz-executor.2 Not tainted 6.8.0-rc6-syzkaller-00159-gc055fc00c07b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
RIP: 0010:sk_nulls_del_node_init_rcu+0x166/0x1a0 include/net/sock.h:799
Code: e8 7f 71 c6 f7 83 fb 02 7c 25 e8 35 6d c6 f7 4d 85 f6 0f 95 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 1b 6d c6 f7 90 <0f> 0b 90 eb b2 e8 10 6d c6 f7 4c 89 e7 be 04 00 00 00 e8 63 e7 d2
RSP: 0018:ffffc900032d7848 EFLAGS: 00010246
RAX: ffffffff89cd0035 RBX: 0000000000000001 RCX: 0000000000040000
RDX: ffffc90004de1000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: 1ffff1100439ac26 R08: ffffffff89ccffe3 R09: 1ffff1100439ac28
R10: dffffc0000000000 R11: ffffed100439ac29 R12: ffff888021cd6140
R13: dffffc0000000000 R14: ffff88802a9bf5c0 R15: ffff888021cd6130
FS: 00007f3b823f16c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3b823f0ff8 CR3: 000000004674a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__inet_hash_connect+0x140f/0x20b0 net/ipv4/inet_hashtables.c:1139
dccp_v6_connect+0xcb9/0x1480 net/dccp/ipv6.c:956
__inet_stream_connect+0x262/0xf30 net/ipv4/af_inet.c:678
inet_stream_connect+0x65/0xa0 net/ipv4/af_inet.c:749
__sys_connect_file net/socket.c:2048 [inline]
__sys_connect+0x2df/0x310 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x7a/0x90 net/socket.c:2072
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f3b8167dda9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3b823f10c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00007f3b817abf80 RCX: 00007f3b8167dda9
RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003
RBP: 00007f3b823f1120 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 000000000000000b R14: 00007f3b817abf80 R15: 00007ffd3beb57b8
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
IB/hfi1: Fix sdma.h tx->num_descs off-by-one error
Unfortunately the commit `fd8958efe877` introduced another error
causing the `descs` array to overflow. This reults in further crashes
easily reproducible by `sendmsg` system call.
[ 1080.836473] general protection fault, probably for non-canonical address 0x400300015528b00a: 0000 [#1] PREEMPT SMP PTI
[ 1080.869326] RIP: 0010:hfi1_ipoib_build_ib_tx_headers.constprop.0+0xe1/0x2b0 [hfi1]
--
[ 1080.974535] Call Trace:
[ 1080.976990] <TASK>
[ 1081.021929] hfi1_ipoib_send_dma_common+0x7a/0x2e0 [hfi1]
[ 1081.027364] hfi1_ipoib_send_dma_list+0x62/0x270 [hfi1]
[ 1081.032633] hfi1_ipoib_send+0x112/0x300 [hfi1]
[ 1081.042001] ipoib_start_xmit+0x2a9/0x2d0 [ib_ipoib]
[ 1081.046978] dev_hard_start_xmit+0xc4/0x210
--
[ 1081.148347] __sys_sendmsg+0x59/0xa0
crash> ipoib_txreq 0xffff9cfeba229f00
struct ipoib_txreq {
txreq = {
list = {
next = 0xffff9cfeba229f00,
prev = 0xffff9cfeba229f00
},
descp = 0xffff9cfeba229f40,
coalesce_buf = 0x0,
wait = 0xffff9cfea4e69a48,
complete = 0xffffffffc0fe0760 <hfi1_ipoib_sdma_complete>,
packet_len = 0x46d,
tlen = 0x0,
num_desc = 0x0,
desc_limit = 0x6,
next_descq_idx = 0x45c,
coalesce_idx = 0x0,
flags = 0x0,
descs = {{
qw = {0x8024000120dffb00, 0x4} # SDMA_DESC0_FIRST_DESC_FLAG (bit 63)
}, {
qw = { 0x3800014231b108, 0x4}
}, {
qw = { 0x310000e4ee0fcf0, 0x8}
}, {
qw = { 0x3000012e9f8000, 0x8}
}, {
qw = { 0x59000dfb9d0000, 0x8}
}, {
qw = { 0x78000e02e40000, 0x8}
}}
},
sdma_hdr = 0x400300015528b000, <<< invalid pointer in the tx request structure
sdma_status = 0x0, SDMA_DESC0_LAST_DESC_FLAG (bit 62)
complete = 0x0,
priv = 0x0,
txq = 0xffff9cfea4e69880,
skb = 0xffff9d099809f400
}
If an SDMA send consists of exactly 6 descriptors and requires dword
padding (in the 7th descriptor), the sdma_txreq descriptor array is not
properly expanded and the packet will overflow into the container
structure. This results in a panic when the send completion runs. The
exact panic varies depending on what elements of the container structure
get corrupted. The fix is to use the correct expression in
_pad_sdma_tx_descs() to test the need to expand the descriptor array.
With this patch the crashes are no longer reproducible and the machine is
stable. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Fix OOB and integer underflow when rx packets
Make sure mwifiex_process_mgmt_packet,
mwifiex_process_sta_rx_packet and mwifiex_process_uap_rx_packet,
mwifiex_uap_queue_bridged_pkt and mwifiex_process_rx_packet
not out-of-bounds access the skb->data buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/iova: Fix alloc iova overflows issue
In __alloc_and_insert_iova_range, there is an issue that retry_pfn
overflows. The value of iovad->anchor.pfn_hi is ~0UL, then when
iovad->cached_node is iovad->anchor, curr_iova->pfn_hi + 1 will
overflow. As a result, if the retry logic is executed, low_pfn is
updated to 0, and then new_pfn < low_pfn returns false to make the
allocation successful.
This issue occurs in the following two situations:
1. The first iova size exceeds the domain size. When initializing
iova domain, iovad->cached_node is assigned as iovad->anchor. For
example, the iova domain size is 10M, start_pfn is 0x1_F000_0000,
and the iova size allocated for the first time is 11M. The
following is the log information, new->pfn_lo is smaller than
iovad->cached_node.
Example log as follows:
[ 223.798112][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
start_pfn:0x1f0000,retry_pfn:0x0,size:0xb00,limit_pfn:0x1f0a00
[ 223.799590][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
success start_pfn:0x1f0000,new->pfn_lo:0x1efe00,new->pfn_hi:0x1f08ff
2. The node with the largest iova->pfn_lo value in the iova domain
is deleted, iovad->cached_node will be updated to iovad->anchor,
and then the alloc iova size exceeds the maximum iova size that can
be allocated in the domain.
After judging that retry_pfn is less than limit_pfn, call retry_pfn+1
to fix the overflow issue. |
| In the Linux kernel, the following vulnerability has been resolved:
media: atomisp: prevent integer overflow in sh_css_set_black_frame()
The "height" and "width" values come from the user so the "height * width"
multiplication can overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: cavium - prevent integer overflow loading firmware
The "code_length" value comes from the firmware file. If your firmware
is untrusted realistically there is probably very little you can do to
protect yourself. Still we try to limit the damage as much as possible.
Also Smatch marks any data read from the filesystem as untrusted and
prints warnings if it not capped correctly.
The "ntohl(ucode->code_length) * 2" multiplication can have an
integer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - add param check for DH
Reject requests with a source buffer that is bigger than the size of the
key. This is to prevent a possible integer underflow that might happen
when copying the source scatterlist into a linear buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - add param check for RSA
Reject requests with a source buffer that is bigger than the size of the
key. This is to prevent a possible integer underflow that might happen
when copying the source scatterlist into a linear buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate BOOT sectors_per_clusters
When the NTFS BOOT sectors_per_clusters field is > 0x80, it represents a
shift value. Make sure that the shift value is not too large before using
it (NTFS max cluster size is 2MB). Return -EVINVAL if it too large.
This prevents negative shift values and shift values that are larger than
the field size.
Prevents this UBSAN error:
UBSAN: shift-out-of-bounds in ../fs/ntfs3/super.c:673:16
shift exponent -192 is negative |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix list protocols enumeration in the base protocol
While enumerating protocols implemented by the SCMI platform using
BASE_DISCOVER_LIST_PROTOCOLS, the number of returned protocols is
currently validated in an improper way since the check employs a sum
between unsigned integers that could overflow and cause the check itself
to be silently bypassed if the returned value 'loop_num_ret' is big
enough.
Fix the validation avoiding the addition. |
| In the Linux kernel, the following vulnerability has been resolved:
uaccess: fix integer overflow on access_ok()
Three architectures check the end of a user access against the
address limit without taking a possible overflow into account.
Passing a negative length or another overflow in here returns
success when it should not.
Use the most common correct implementation here, which optimizes
for a constant 'size' argument, and turns the common case into a
single comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: prevent underflow in nfssvc_decode_writeargs()
Smatch complains:
fs/nfsd/nfsxdr.c:341 nfssvc_decode_writeargs()
warn: no lower bound on 'args->len'
Change the type to unsigned to prevent this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: prevent integer overflow on 32 bit systems
On a 32 bit system, the "len * sizeof(*p)" operation can have an
integer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix qgroup reserve overflow the qgroup limit
We use extent_changeset->bytes_changed in qgroup_reserve_data() to record
how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the
bytes_changed is set as "unsigned int", and it will overflow if we try to
fallocate a range larger than 4GiB. The result is we reserve less bytes
and eventually break the qgroup limit.
Unlike regular buffered/direct write, which we use one changeset for
each ordered extent, which can never be larger than 256M. For
fallocate, we use one changeset for the whole range, thus it no longer
respects the 256M per extent limit, and caused the problem.
The following example test script reproduces the problem:
$ cat qgroup-overflow.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Set qgroup limit to 2GiB.
btrfs quota enable $MNT
btrfs qgroup limit 2G $MNT
# Try to fallocate a 3GiB file. This should fail.
echo
echo "Try to fallocate a 3GiB file..."
fallocate -l 3G $MNT/3G.file
# Try to fallocate a 5GiB file.
echo
echo "Try to fallocate a 5GiB file..."
fallocate -l 5G $MNT/5G.file
# See we break the qgroup limit.
echo
sync
btrfs qgroup show -r $MNT
umount $MNT
When running the test:
$ ./qgroup-overflow.sh
(...)
Try to fallocate a 3GiB file...
fallocate: fallocate failed: Disk quota exceeded
Try to fallocate a 5GiB file...
qgroupid rfer excl max_rfer
-------- ---- ---- --------
0/5 5.00GiB 5.00GiB 2.00GiB
Since we have no control of how bytes_changed is used, it's better to
set it to u64. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix ia_size underflow
iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and
NFSv4 both define file size as an unsigned 64-bit type. Thus there
is a range of valid file size values an NFS client can send that is
already larger than Linux can handle.
Currently decode_fattr4() dumps a full u64 value into ia_size. If
that value happens to be larger than S64_MAX, then ia_size
underflows. I'm about to fix up the NFSv3 behavior as well, so let's
catch the underflow in the common code path: nfsd_setattr(). |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix overflow for large capacity partition
Using int type for sector index, there will be overflow in a large
capacity partition.
For example, if storage with sector size of 512 bytes and partition
capacity is larger than 2TB, there will be overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_debug: Fix type in min_t to avoid stack OOB
Change min_t() to use type "u32" instead of type "int" to avoid stack out
of bounds. With min_t() type "int" the values get sign extended and the
larger value gets used causing stack out of bounds.
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707
CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189
memcpy+0x23/0x60 mm/kasan/shadow.c:65
memcpy include/linux/fortify-string.h:191 [inline]
sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000
fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162
fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline]
resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887
schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478
scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533
scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline]
scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699
blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639
__blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
__blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761
__blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838
blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62
sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836
sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774
sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939
sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
net: vlan: fix underflow for the real_dev refcnt
Inject error before dev_hold(real_dev) in register_vlan_dev(),
and execute the following testcase:
ip link add dev dummy1 type dummy
ip link add name dummy1.100 link dummy1 type vlan id 100
ip link del dev dummy1
When the dummy netdevice is removed, we will get a WARNING as following:
=======================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 2 PID: 0 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0
and an endless loop of:
=======================================================================
unregister_netdevice: waiting for dummy1 to become free. Usage count = -1073741824
That is because dev_put(real_dev) in vlan_dev_free() be called without
dev_hold(real_dev) in register_vlan_dev(). It makes the refcnt of real_dev
underflow.
Move the dev_hold(real_dev) to vlan_dev_init() which is the call-back of
ndo_init(). That makes dev_hold() and dev_put() for vlan's real_dev
symmetrical. |
