Export limit exceeded: 425880 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 425880 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26253 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23234 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid UAF in f2fs_write_end_io() As syzbot reported an use-after-free issue in f2fs_write_end_io(). It is caused by below race condition: loop device umount - worker_thread - loop_process_work - do_req_filebacked - lo_rw_aio - lo_rw_aio_complete - blk_mq_end_request - blk_update_request - f2fs_write_end_io - dec_page_count - folio_end_writeback - kill_f2fs_super - kill_block_super - f2fs_put_super : free(sbi) : get_pages(, F2FS_WB_CP_DATA) accessed sbi which is freed In kill_f2fs_super(), we will drop all page caches of f2fs inodes before call free(sbi), it guarantee that all folios should end its writeback, so it should be safe to access sbi before last folio_end_writeback(). Let's relocate ckpt thread wakeup flow before folio_end_writeback() to resolve this issue. | ||||
| CVE-2026-23235 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix out-of-bounds access in sysfs attribute read/write Some f2fs sysfs attributes suffer from out-of-bounds memory access and incorrect handling of integer values whose size is not 4 bytes. For example: vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out vm:~# cat /sys/fs/f2fs/vde/carve_out 65537 vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold 1 carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit integer. However, the sysfs interface allows setting it to a value larger than 255, resulting in an out-of-range update. atgc_age_threshold maps to {struct atgc_management}->age_threshold, which is a 64-bit integer, but its sysfs interface cannot correctly set values larger than UINT_MAX. The root causes are: 1. __sbi_store() treats all default values as unsigned int, which prevents updating integers larger than 4 bytes and causes out-of-bounds writes for integers smaller than 4 bytes. 2. f2fs_sbi_show() also assumes all default values are unsigned int, leading to out-of-bounds reads and incorrect access to integers larger than 4 bytes. This patch introduces {struct f2fs_attr}->size to record the actual size of the integer associated with each sysfs attribute. With this information, sysfs read and write operations can correctly access and update values according to their real data size, avoiding memory corruption and truncation. | ||||
| CVE-2026-5877 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-04-15 | 8.8 High |
| Use after free in Navigation in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-5878 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-04-15 | 4.3 Medium |
| Incorrect security UI in Blink in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-5880 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-04-15 | 4.3 Medium |
| Insufficient policy enforcement in browser UI in Google Chrome prior to 147.0.7727.55 allowed a remote attacker who had compromised the renderer process to spoof the contents of the Omnibox (URL bar) via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-5881 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-04-15 | 6.5 Medium |
| Policy bypass in LocalNetworkAccess in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-5882 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-04-15 | 4.3 Medium |
| Incorrect security UI in Fullscreen in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-5892 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-04-15 | 6.6 Medium |
| Insufficient policy enforcement in PWAs in Google Chrome prior to 147.0.7727.55 allowed a remote attacker who had compromised the renderer process to install a PWA without user consent via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-5894 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-04-15 | 4.3 Medium |
| Inappropriate implementation in PDF in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Low) | ||||
| CVE-2026-5896 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-04-15 | 6.1 Medium |
| Policy bypass in Audio in Google Chrome prior to 147.0.7727.55 allowed a remote attacker who convinced a user to engage in specific UI gestures to bypass sandbox download restrictions via a crafted HTML page. (Chromium security severity: Low) | ||||
| CVE-2026-5907 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-04-15 | 8.1 High |
| Insufficient data validation in Media in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to perform an out of bounds memory read via a crafted video file. (Chromium security severity: Low) | ||||
| CVE-2026-39860 | 2 Linux, Nixos | 2 Linux Kernel, Nix | 2026-04-15 | 9 Critical |
| Nix is a package manager for Linux and other Unix systems. A bug in the fix for CVE-2024-27297 allowed for arbitrary overwrites of files writable by the Nix process orchestrating the builds (typically the Nix daemon running as root in multi-user installations) by following symlinks during fixed-output derivation output registration. This affects sandboxed Linux builds - sandboxed macOS builds are unaffected. The location of the temporary output used for the output copy was located inside the build chroot. A symlink, pointing to an arbitrary location in the filesystem, could be created by the derivation builder at that path. During output registration, the Nix process (running in the host mount namespace) would follow that symlink and overwrite the destination with the derivation's output contents. In multi-user installations, this allows all users able to submit builds to the Nix daemon (allowed-users - defaulting to all users) to gain root privileges by modifying sensitive files. This vulnerability is fixed in 2.34.5, 2.33.4, 2.32.7, 2.31.4, 2.30.4, 2.29.3, and 2.28.6. | ||||
| CVE-2025-71140 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Use spinlock for context list protection lock Previously a mutex was added to protect the encoder and decoder context lists from unexpected changes originating from the SCP IP block, causing the context pointer to go invalid, resulting in a NULL pointer dereference in the IPI handler. Turns out on the MT8173, the VPU IPI handler is called from hard IRQ context. This causes a big warning from the scheduler. This was first reported downstream on the ChromeOS kernels, but is also reproducible on mainline using Fluster with the FFmpeg v4l2m2m decoders. Even though the actual capture format is not supported, the affected code paths are triggered. Since this lock just protects the context list and operations on it are very fast, it should be OK to switch to a spinlock. | ||||
| CVE-2023-53780 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix FCLK pstate change underflow [Why] Currently we set FCLK p-state change watermark calculated based on dummy p-state latency when UCLK p-state is not supported [How] Calculate FCLK p-state change watermark based on on FCLK pstate change latency in case UCLK p-state is not supported | ||||
| CVE-2023-54158 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't free qgroup space unless specified Boris noticed in his simple quotas testing that he was getting a leak with Sweet Tea's change to subvol create that stopped doing a transaction commit. This was just a side effect of that change. In the delayed inode code we have an optimization that will free extra reservations if we think we can pack a dir item into an already modified leaf. Previously this wouldn't be triggered in the subvolume create case because we'd commit the transaction, it was still possible but much harder to trigger. It could actually be triggered if we did a mkdir && subvol create with qgroups enabled. This occurs because in btrfs_insert_delayed_dir_index(), which gets called when we're adding the dir item, we do the following: btrfs_block_rsv_release(fs_info, trans->block_rsv, bytes, NULL); if we're able to skip reserving space. The problem here is that trans->block_rsv points at the temporary block rsv for the subvolume create, which has qgroup reservations in the block rsv. This is a problem because btrfs_block_rsv_release() will do the following: if (block_rsv->qgroup_rsv_reserved >= block_rsv->qgroup_rsv_size) { qgroup_to_release = block_rsv->qgroup_rsv_reserved - block_rsv->qgroup_rsv_size; block_rsv->qgroup_rsv_reserved = block_rsv->qgroup_rsv_size; } The temporary block rsv just has ->qgroup_rsv_reserved set, ->qgroup_rsv_size == 0. The optimization in btrfs_insert_delayed_dir_index() sets ->qgroup_rsv_reserved = 0. Then later on when we call btrfs_subvolume_release_metadata() which has btrfs_block_rsv_release(fs_info, rsv, (u64)-1, &qgroup_to_release); btrfs_qgroup_convert_reserved_meta(root, qgroup_to_release); qgroup_to_release is set to 0, and we do not convert the reserved metadata space. The problem here is that the block rsv code has been unconditionally messing with ->qgroup_rsv_reserved, because the main place this is used is delalloc, and any time we call btrfs_block_rsv_release() we do it with qgroup_to_release set, and thus do the proper accounting. The subvolume code is the only other code that uses the qgroup reservation stuff, but it's intermingled with the above optimization, and thus was getting its reservation freed out from underneath it and thus leaking the reserved space. The solution is to simply not mess with the qgroup reservations if we don't have qgroup_to_release set. This works with the existing code as anything that messes with the delalloc reservations always have qgroup_to_release set. This fixes the leak that Boris was observing. | ||||
| CVE-2023-54133 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfp: clean mc addresses in application firmware when closing port When moving devices from one namespace to another, mc addresses are cleaned in software while not removed from application firmware. Thus the mc addresses are remained and will cause resource leak. Now use `__dev_mc_unsync` to clean mc addresses when closing port. | ||||
| CVE-2025-40126 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC The referenced commit introduced exception handlers on user-space memory references in copy_from_user and copy_to_user. These handlers return from the respective function and calculate the remaining bytes left to copy using the current register contents. This commit fixes a couple of bad calculations. This will fix the return value of copy_from_user and copy_to_user in the faulting case. The behaviour of memcpy stays unchanged. | ||||
| CVE-2025-40256 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added In commit b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x"), I missed the case where state creation fails between full initialization (->init_state has been called) and being inserted on the lists. In this situation, ->init_state has been called, so for IPcomp tunnels, the fallback tunnel has been created and added onto the lists, but the user state never gets added, because we fail before that. The user state doesn't go through __xfrm_state_delete, so we don't call xfrm_state_delete_tunnel for those states, and we end up leaking the FB tunnel. There are several codepaths affected by this: the add/update paths, in both net/key and xfrm, and the migrate code (xfrm_migrate, xfrm_state_migrate). A "proper" rollback of the init_state work would probably be doable in the add/update code, but for migrate it gets more complicated as multiple states may be involved. At some point, the new (not-inserted) state will be destroyed, so call xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states will have their fallback tunnel cleaned up during __xfrm_state_delete, which solves the issue that b441cf3f8c4b (and other patches before it) aimed at. All states (including FB tunnels) will be removed from the lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work). | ||||
| CVE-2025-40260 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix scx_enable() crash on helper kthread creation failure A crash was observed when the sched_ext selftests runner was terminated with Ctrl+\ while test 15 was running: NIP [c00000000028fa58] scx_enable.constprop.0+0x358/0x12b0 LR [c00000000028fa2c] scx_enable.constprop.0+0x32c/0x12b0 Call Trace: scx_enable.constprop.0+0x32c/0x12b0 (unreliable) bpf_struct_ops_link_create+0x18c/0x22c __sys_bpf+0x23f8/0x3044 sys_bpf+0x2c/0x6c system_call_exception+0x124/0x320 system_call_vectored_common+0x15c/0x2ec kthread_run_worker() returns an ERR_PTR() on failure rather than NULL, but the current code in scx_alloc_and_add_sched() only checks for a NULL helper. Incase of failure on SIGQUIT, the error is not handled in scx_alloc_and_add_sched() and scx_enable() ends up dereferencing an error pointer. Error handling is fixed in scx_alloc_and_add_sched() to propagate PTR_ERR() into ret, so that scx_enable() jumps to the existing error path, avoiding random dereference on failure. | ||||
| CVE-2023-54131 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: Fix memory leak when handling surveys When removing a rt2x00 device, its associated channel surveys are not freed, causing a memory leak observable with kmemleak: unreferenced object 0xffff9620f0881a00 (size 512): comm "systemd-udevd", pid 2290, jiffies 4294906974 (age 33.768s) hex dump (first 32 bytes): 70 44 12 00 00 00 00 00 92 8a 00 00 00 00 00 00 pD.............. 00 00 00 00 00 00 00 00 ab 87 01 00 00 00 00 00 ................ backtrace: [<ffffffffb0ed858b>] __kmalloc+0x4b/0x130 [<ffffffffc1b0f29b>] rt2800_probe_hw+0xc2b/0x1380 [rt2800lib] [<ffffffffc1a9496e>] rt2800usb_probe_hw+0xe/0x60 [rt2800usb] [<ffffffffc1ae491a>] rt2x00lib_probe_dev+0x21a/0x7d0 [rt2x00lib] [<ffffffffc1b3b83e>] rt2x00usb_probe+0x1be/0x980 [rt2x00usb] [<ffffffffc05981e2>] usb_probe_interface+0xe2/0x310 [usbcore] [<ffffffffb13be2d5>] really_probe+0x1a5/0x410 [<ffffffffb13be5c8>] __driver_probe_device+0x78/0x180 [<ffffffffb13be6fe>] driver_probe_device+0x1e/0x90 [<ffffffffb13be972>] __driver_attach+0xd2/0x1c0 [<ffffffffb13bbc57>] bus_for_each_dev+0x77/0xd0 [<ffffffffb13bd2a2>] bus_add_driver+0x112/0x210 [<ffffffffb13bfc6c>] driver_register+0x5c/0x120 [<ffffffffc0596ae8>] usb_register_driver+0x88/0x150 [usbcore] [<ffffffffb0c011c4>] do_one_initcall+0x44/0x220 [<ffffffffb0d6134c>] do_init_module+0x4c/0x220 Fix this by freeing the channel surveys on device removal. Tested with a RT3070 based USB wireless adapter. | ||||