Export limit exceeded: 425871 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26203 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40315 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix epfile null pointer access after ep enable. A race condition occurs when ffs_func_eps_enable() runs concurrently with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset() sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading to a NULL pointer dereference when accessing epfile->ep in ffs_func_eps_enable() after successful usb_ep_enable(). The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and ffs_data_close() functions, and its modification is protected by the spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function is also protected by ffs->eps_lock. Thus, add NULL pointer handling for ffs->epfiles in the ffs_func_eps_enable() function to fix issues | ||||
| CVE-2022-50704 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: Fix use-after-free during usb config switch In the process of switching USB config from rndis to other config, if the hardware does not support the ->pullup callback, or the hardware encounters a low probability fault, both of them may cause the ->pullup callback to fail, which will then cause a system panic (use after free). The gadget drivers sometimes need to be unloaded regardless of the hardware's behavior. Analysis as follows: ======================================================================= (1) write /config/usb_gadget/g1/UDC "none" gether_disconnect+0x2c/0x1f8 rndis_disable+0x4c/0x74 composite_disconnect+0x74/0xb0 configfs_composite_disconnect+0x60/0x7c usb_gadget_disconnect+0x70/0x124 usb_gadget_unregister_driver+0xc8/0x1d8 gadget_dev_desc_UDC_store+0xec/0x1e4 (2) rm /config/usb_gadget/g1/configs/b.1/f1 rndis_deregister+0x28/0x54 rndis_free+0x44/0x7c usb_put_function+0x14/0x1c config_usb_cfg_unlink+0xc4/0xe0 configfs_unlink+0x124/0x1c8 vfs_unlink+0x114/0x1dc (3) rmdir /config/usb_gadget/g1/functions/rndis.gs4 panic+0x1fc/0x3d0 do_page_fault+0xa8/0x46c do_mem_abort+0x3c/0xac el1_sync_handler+0x40/0x78 0xffffff801138f880 rndis_close+0x28/0x34 eth_stop+0x74/0x110 dev_close_many+0x48/0x194 rollback_registered_many+0x118/0x814 unregister_netdev+0x20/0x30 gether_cleanup+0x1c/0x38 rndis_attr_release+0xc/0x14 kref_put+0x74/0xb8 configfs_rmdir+0x314/0x374 If gadget->ops->pullup() return an error, function rndis_close() will be called, then it will causes a use-after-free problem. ======================================================================= | ||||
| CVE-2025-40314 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: Use-after-free during failed initialization and exit of cdnsp gadget In the __cdnsp_gadget_init() and cdnsp_gadget_exit() functions, the gadget structure (pdev->gadget) was freed before its endpoints. The endpoints are linked via the ep_list in the gadget structure. Freeing the gadget first leaves dangling pointers in the endpoint list. When the endpoints are subsequently freed, this results in a use-after-free. Fix: By separating the usb_del_gadget_udc() operation into distinct "del" and "put" steps, cdnsp_gadget_free_endpoints() can be executed prior to the final release of the gadget structure with usb_put_gadget(). A patch similar to bb9c74a5bd14("usb: dwc3: gadget: Free gadget structure only after freeing endpoints"). | ||||
| CVE-2025-40313 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: pretend $Extend records as regular files Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()") requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/ S_IFIFO/S_IFSOCK type, use S_IFREG for $Extend records. | ||||
| CVE-2025-40312 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: jfs: Verify inode mode when loading from disk The inode mode loaded from corrupted disk can be invalid. Do like what commit 0a9e74051313 ("isofs: Verify inode mode when loading from disk") does. | ||||
| CVE-2025-40310 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw There is race in amdgpu_amdkfd_device_fini_sw and interrupt. if amdgpu_amdkfd_device_fini_sw run in b/w kfd_cleanup_nodes and kfree(kfd), and KGD interrupt generated. kernel panic log: BUG: kernel NULL pointer dereference, address: 0000000000000098 amdgpu 0000:c8:00.0: amdgpu: Requesting 4 partitions through PSP PGD d78c68067 P4D d78c68067 kfd kfd: amdgpu: Allocated 3969056 bytes on gart PUD 1465b8067 PMD @ Oops: @002 [#1] SMP NOPTI kfd kfd: amdgpu: Total number of KFD nodes to be created: 4 CPU: 115 PID: @ Comm: swapper/115 Kdump: loaded Tainted: G S W OE K RIP: 0010:_raw_spin_lock_irqsave+0x12/0x40 Code: 89 e@ 41 5c c3 cc cc cc cc 66 66 2e Of 1f 84 00 00 00 00 00 OF 1f 40 00 Of 1f 44% 00 00 41 54 9c 41 5c fa 31 cO ba 01 00 00 00 <fO> OF b1 17 75 Ba 4c 89 e@ 41 Sc 89 c6 e8 07 38 5d RSP: 0018: ffffc90@1a6b0e28 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000018 0000000000000001 RSI: ffff8883bb623e00 RDI: 0000000000000098 ffff8883bb000000 RO8: ffff888100055020 ROO: ffff888100055020 0000000000000000 R11: 0000000000000000 R12: 0900000000000002 ffff888F2b97da0@ R14: @000000000000098 R15: ffff8883babdfo00 CS: 010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000098 CR3: 0000000e7cae2006 CR4: 0000000002770ce0 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 0000000000000000 DR6: 00000000fffeO7FO DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> kgd2kfd_interrupt+@x6b/0x1f@ [amdgpu] ? amdgpu_fence_process+0xa4/0x150 [amdgpu] kfd kfd: amdgpu: Node: 0, interrupt_bitmap: 3 YcpxFl Rant tErace amdgpu_irq_dispatch+0x165/0x210 [amdgpu] amdgpu_ih_process+0x80/0x100 [amdgpu] amdgpu: Virtual CRAT table created for GPU amdgpu_irq_handler+0x1f/@x60 [amdgpu] __handle_irq_event_percpu+0x3d/0x170 amdgpu: Topology: Add dGPU node [0x74a2:0x1002] handle_irq_event+0x5a/@xcO handle_edge_irq+0x93/0x240 kfd kfd: amdgpu: KFD node 1 partition @ size 49148M asm_call_irq_on_stack+0xf/@x20 </IRQ> common_interrupt+0xb3/0x130 asm_common_interrupt+0x1le/0x40 5.10.134-010.a1i5000.a18.x86_64 #1 | ||||
| CVE-2022-50763 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: marvell/octeontx - prevent integer overflows The "code_length" value comes from the firmware file. If your firmware is untrusted realistically there is probably very little you can do to protect yourself. Still we try to limit the damage as much as possible. Also Smatch marks any data read from the filesystem as untrusted and prints warnings if it not capped correctly. The "code_length * 2" can overflow. The round_up(ucode_size, 16) + sizeof() expression can overflow too. Prevent these overflows. | ||||
| CVE-2022-50703 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe() There are two refcount leak bugs in qcom_smsm_probe(): (1) The 'local_node' is escaped out from for_each_child_of_node() as the break of iteration, we should call of_node_put() for it in error path or when it is not used anymore. (2) The 'node' is escaped out from for_each_available_child_of_node() as the 'goto', we should call of_node_put() for it in goto target. | ||||
| CVE-2025-40308 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bcsp: receive data only if registered Currently, bcsp_recv() can be called even when the BCSP protocol has not been registered. This leads to a NULL pointer dereference, as shown in the following stack trace: KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590 Call Trace: <TASK> hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627 tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290 tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f To prevent this, ensure that the HCI_UART_REGISTERED flag is set before processing received data. If the protocol is not registered, return -EUNATCH. | ||||
| CVE-2025-40305 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: 9p/trans_fd: p9_fd_request: kick rx thread if EPOLLIN p9_read_work() doesn't set Rworksched and doesn't do schedule_work(m->rq) if list_empty(&m->req_list). However, if the pipe is full, we need to read more data and this used to work prior to commit aaec5a95d59615 ("pipe_read: don't wake up the writer if the pipe is still full"). p9_read_work() does p9_fd_read() -> ... -> anon_pipe_read() which (before the commit above) triggered the unnecessary wakeup. This wakeup calls p9_pollwake() which kicks p9_poll_workfn() -> p9_poll_mux(), p9_poll_mux() will notice EPOLLIN and schedule_work(&m->rq). This no longer happens after the optimization above, change p9_fd_request() to use p9_poll_mux() instead of only checking for EPOLLOUT. | ||||
| CVE-2022-50702 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix possible memory leak in vdpasim_net_init() and vdpasim_blk_init() Inject fault while probing module, if device_register() fails in vdpasim_net_init() or vdpasim_blk_init(), but the refcount of kobject is not decreased to 0, the name allocated in dev_set_name() is leaked. Fix this by calling put_device(), so that name can be freed in callback function kobject_cleanup(). (vdpa_sim_net) unreferenced object 0xffff88807eebc370 (size 16): comm "modprobe", pid 3848, jiffies 4362982860 (age 18.153s) hex dump (first 16 bytes): 76 64 70 61 73 69 6d 5f 6e 65 74 00 6b 6b 6b a5 vdpasim_net.kkk. backtrace: [<ffffffff8174f19e>] __kmalloc_node_track_caller+0x4e/0x150 [<ffffffff81731d53>] kstrdup+0x33/0x60 [<ffffffff83a5d421>] kobject_set_name_vargs+0x41/0x110 [<ffffffff82d87aab>] dev_set_name+0xab/0xe0 [<ffffffff82d91a23>] device_add+0xe3/0x1a80 [<ffffffffa0270013>] 0xffffffffa0270013 [<ffffffff81001c27>] do_one_initcall+0x87/0x2e0 [<ffffffff813739cb>] do_init_module+0x1ab/0x640 [<ffffffff81379d20>] load_module+0x5d00/0x77f0 [<ffffffff8137bc40>] __do_sys_finit_module+0x110/0x1b0 [<ffffffff83c4d505>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 (vdpa_sim_blk) unreferenced object 0xffff8881070c1250 (size 16): comm "modprobe", pid 6844, jiffies 4364069319 (age 17.572s) hex dump (first 16 bytes): 76 64 70 61 73 69 6d 5f 62 6c 6b 00 6b 6b 6b a5 vdpasim_blk.kkk. backtrace: [<ffffffff8174f19e>] __kmalloc_node_track_caller+0x4e/0x150 [<ffffffff81731d53>] kstrdup+0x33/0x60 [<ffffffff83a5d421>] kobject_set_name_vargs+0x41/0x110 [<ffffffff82d87aab>] dev_set_name+0xab/0xe0 [<ffffffff82d91a23>] device_add+0xe3/0x1a80 [<ffffffffa0220013>] 0xffffffffa0220013 [<ffffffff81001c27>] do_one_initcall+0x87/0x2e0 [<ffffffff813739cb>] do_init_module+0x1ab/0x640 [<ffffffff81379d20>] load_module+0x5d00/0x77f0 [<ffffffff8137bc40>] __do_sys_finit_module+0x110/0x1b0 [<ffffffff83c4d505>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 | ||||
| CVE-2025-40296 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: int3472: Fix double free of GPIO device during unregister regulator_unregister() already frees the associated GPIO device. On ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to random failures when other drivers (typically Intel THC) attempt to allocate interrupts. The root cause is that the reference count of the pinctrl_intel_platform module unexpectedly drops to zero when this driver defers its probe. This behavior can also be reproduced by unloading the module directly. Fix the issue by removing the redundant release of the GPIO device during regulator unregistration. | ||||
| CVE-2025-40293 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Don't overflow during division for dirty tracking If pgshift is 63 then BITS_PER_TYPE(*bitmap->bitmap) * pgsize will overflow to 0 and this triggers divide by 0. In this case the index should just be 0, so reorganize things to divide by shift and avoid hitting any overflows. | ||||
| CVE-2022-50674 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: vdso: fix NULL deference in vdso_join_timens() when vfork Testing tools/testing/selftests/timens/vfork_exec.c got below kernel log: [ 6.838454] Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000000020 [ 6.842255] Oops [#1] [ 6.842871] Modules linked in: [ 6.844249] CPU: 1 PID: 64 Comm: vfork_exec Not tainted 6.0.0-rc3-rt15+ #8 [ 6.845861] Hardware name: riscv-virtio,qemu (DT) [ 6.848009] epc : vdso_join_timens+0xd2/0x110 [ 6.850097] ra : vdso_join_timens+0xd2/0x110 [ 6.851164] epc : ffffffff8000635c ra : ffffffff8000635c sp : ff6000000181fbf0 [ 6.852562] gp : ffffffff80cff648 tp : ff60000000fdb700 t0 : 3030303030303030 [ 6.853852] t1 : 0000000000000030 t2 : 3030303030303030 s0 : ff6000000181fc40 [ 6.854984] s1 : ff60000001e6c000 a0 : 0000000000000010 a1 : ffffffff8005654c [ 6.856221] a2 : 00000000ffffefff a3 : 0000000000000000 a4 : 0000000000000000 [ 6.858114] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038 [ 6.859484] s2 : ff60000001e6c068 s3 : ff6000000108abb0 s4 : 0000000000000000 [ 6.860751] s5 : 0000000000001000 s6 : ffffffff8089dc40 s7 : ffffffff8089dc38 [ 6.862029] s8 : ffffffff8089dc30 s9 : ff60000000fdbe38 s10: 000000000000005e [ 6.863304] s11: ffffffff80cc3510 t3 : ffffffff80d1112f t4 : ffffffff80d1112f [ 6.864565] t5 : ffffffff80d11130 t6 : ff6000000181fa00 [ 6.865561] status: 0000000000000120 badaddr: 0000000000000020 cause: 000000000000000d [ 6.868046] [<ffffffff8008dc94>] timens_commit+0x38/0x11a [ 6.869089] [<ffffffff8008dde8>] timens_on_fork+0x72/0xb4 [ 6.870055] [<ffffffff80190096>] begin_new_exec+0x3c6/0x9f0 [ 6.871231] [<ffffffff801d826c>] load_elf_binary+0x628/0x1214 [ 6.872304] [<ffffffff8018ee7a>] bprm_execve+0x1f2/0x4e4 [ 6.873243] [<ffffffff8018f90c>] do_execveat_common+0x16e/0x1ee [ 6.874258] [<ffffffff8018f9c8>] sys_execve+0x3c/0x48 [ 6.875162] [<ffffffff80003556>] ret_from_syscall+0x0/0x2 [ 6.877484] ---[ end trace 0000000000000000 ]--- This is because the mm->context.vdso_info is NULL in vfork case. From another side, mm->context.vdso_info either points to vdso info for RV64 or vdso info for compat, there's no need to bloat riscv's mm_context_t, we can handle the difference when setup the additional page for vdso. | ||||
| CVE-2022-50669 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: ocxl: fix possible name leak in ocxl_file_register_afu() If device_register() returns error in ocxl_file_register_afu(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(), and info is freed in info_release(). | ||||
| CVE-2022-50657 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: mm: add missing memcpy in kasan_init Hi Atish, It seems that the panic is due to the missing memcpy during kasan_init. Could you please check whether this patch is helpful? When doing kasan_populate, the new allocated base_pud/base_p4d should contain kasan_early_shadow_{pud, p4d}'s content. Add the missing memcpy to avoid page fault when read/write kasan shadow region. Tested on: - qemu with sv57 and CONFIG_KASAN on. - qemu with sv48 and CONFIG_KASAN on. | ||||
| CVE-2022-50654 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix panic due to wrong pageattr of im->image In the scenario where livepatch and kretfunc coexist, the pageattr of im->image is rox after arch_prepare_bpf_trampoline in bpf_trampoline_update, and then modify_fentry or register_fentry returns -EAGAIN from bpf_tramp_ftrace_ops_func, the BPF_TRAMP_F_ORIG_STACK flag will be configured, and arch_prepare_bpf_trampoline will be re-executed. At this time, because the pageattr of im->image is rox, arch_prepare_bpf_trampoline will read and write im->image, which causes a fault. as follows: insmod livepatch-sample.ko # samples/livepatch/livepatch-sample.c bpftrace -e 'kretfunc:cmdline_proc_show {}' BUG: unable to handle page fault for address: ffffffffa0206000 PGD 322d067 P4D 322d067 PUD 322e063 PMD 1297e067 PTE d428061 Oops: 0003 [#1] PREEMPT SMP PTI CPU: 2 PID: 270 Comm: bpftrace Tainted: G E K 6.1.0 #5 RIP: 0010:arch_prepare_bpf_trampoline+0xed/0x8c0 RSP: 0018:ffffc90001083ad8 EFLAGS: 00010202 RAX: ffffffffa0206000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: ffffffffa0206001 RSI: ffffffffa0206000 RDI: 0000000000000030 RBP: ffffc90001083b70 R08: 0000000000000066 R09: ffff88800f51b400 R10: 000000002e72c6e5 R11: 00000000d0a15080 R12: ffff8880110a68c8 R13: 0000000000000000 R14: ffff88800f51b400 R15: ffffffff814fec10 FS: 00007f87bc0dc780(0000) GS:ffff88803e600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0206000 CR3: 0000000010b70000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bpf_trampoline_update+0x25a/0x6b0 __bpf_trampoline_link_prog+0x101/0x240 bpf_trampoline_link_prog+0x2d/0x50 bpf_tracing_prog_attach+0x24c/0x530 bpf_raw_tp_link_attach+0x73/0x1d0 __sys_bpf+0x100e/0x2570 __x64_sys_bpf+0x1c/0x30 do_syscall_64+0x5b/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd With this patch, when modify_fentry or register_fentry returns -EAGAIN from bpf_tramp_ftrace_ops_func, the pageattr of im->image will be reset to nx+rw. | ||||
| CVE-2025-40299 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: Implement gettimex64 with -EOPNOTSUPP gve implemented a ptp_clock for sole use of do_aux_work at this time. ptp_clock_gettime() and ptp_sys_offset() assume every ptp_clock has implemented either gettimex64 or gettime64. Stub gettimex64 and return -EOPNOTSUPP to prevent NULL dereferencing. | ||||
| CVE-2025-40298 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: Implement settime64 with -EOPNOTSUPP ptp_clock_settime() assumes every ptp_clock has implemented settime64(). Stub it with -EOPNOTSUPP to prevent a NULL dereference. | ||||
| CVE-2022-50651 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: eeprom: fix null-deref on genl_info in dump The similar fix as commit 46cdedf2a0fa ("ethtool: pse-pd: fix null-deref on genl_info in dump") is also needed for ethtool eeprom. | ||||