| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mt7621: avoid corruption of shared interrupt trigger state
The bank-shared fields like 'rising' and 'falling' are modified using
non-atomic read-modify-write operations. Since every gpio chip instance
represents an entire bank of 32 pins, if 'mediatek_gpio_irq_type()' is
called concurrently for different IRQs on the same bank a possible overwrite
of each other's configuration is possible. Thus, protect this state with
'gpio_generic_lock_irqsave' lock in the same way it is handled in irp_chip
'mediatek_gpio_irq_mask()' and 'mediatek_gpio_irq_unmask()' callbacks. |
| In the Linux kernel, the following vulnerability has been resolved:
mei: bus: access mei_device under device_lock on cleanup
Fix couple of problems in mei_cl_bus_dev_release():
mei_cl_flush_queues() is running without lock.
bus->file_list access after mei_dev_bus_put(bus) can become a
use-after-free if this was the last reference to bus.
Protect queues cleanup and WARN traversal by device lock there
to avoid the concurrent access problems.
Move WARN traversal before mei_dev_bus_put(bus).
This file uses bus variable name for mei_device, adjust
code of mei_cl_bus_dev_release() to use bus variable too. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/mtier: error out for zero quota goal target values
Patch series "mm/damon: avoid division by zero from damos_quota_score()".
DAMON_SAMPLE_MTIER and DAMON_LRU_SORT allow the user to trigger division
by zero in damos_quota_score(). Avoid it by adding parameters validation
checks.
This patch (of 2):
damos_quota_score() can trigger division by zero if the target_value is
zero. DAMON_SAMPLE_MTIER lets users set the target_value via
node0_mem_{used,free}_bp parameters. It doesn't guard zero value case,
though. As a result, users can trigger division by zero. Fix the issue
by returning an error when the user tries to start DAMON with zero
node0_mem_{used,free}_bp parameter values.
DAMON_SAMPLE_MTIER is just a sample module, but the consequence is quite
bad. Also the zero node0_mem_free_bp parameter might look like a
reasonable setup to some users. Hence, the issue might really happen in
the real world.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_sample_mtier/parameters
# echo 4096 > node0_start_addr
# echo 8192 > node0_end_addr
# echo 8192 > node1_start_addr
# echo 81920 > node1_end_addr
# echo 0 > node0_mem_free_bp
# echo Y > enabled
# dmesg -w
[...]
[18792.235916] Oops: divide error: 0000 [#1] SMP NOPTI
[...]
[18792.242787] RIP: 0010:damos_quota_score+0x6f/0x480
[...]
This issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/lru_sort: error out for >10000 active_mem_bp
damos_quota_score() can trigger division by zero if the target value is
zero. DAMON_LRU_SORT lets users set the target value for the hot memory
scheme via active_mem_bp parameter. It avoids setting it as the target
value if the parameter value is zero. However, it also sets the cold
memory scheme with a target value that is calculated as '10000 -
active_mem_bp + 2'. Hence, if a user sets active_mem_bp 10002, the cold
memory scheme's quota goal target value can be zero. As a result,
division by zero can be triggered. Fix by returning an error when the
user tries to start DAMON with >10000 active_mem_bp parameter value.
It makes no sense to set active_mem_bp with 10002. It also requires
module parameters write permission to reproduce the issue. That said, the
consequence is quite bad.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_lru_sort/parameters
# echo 1000 > wmarks_high
# echo 995 > wmarks_mid
# echo 0 > wmarks_low
# echo 10002 > active_mem_bp
# echo Y > enabled
# dmesg -w
[...]
[ 597.421247] Oops: divide error: 0000 [#1] SMP NOPTI
[ 597.428848] RIP: 0010:damos_quota_score+0x6f/0x480
This issue was discovered [1] by Sashiko. |
| A race condition was addressed with improved handling of symbolic links. This issue is fixed in iOS 18.7.5 and iPadOS 18.7.5, iOS 26.3 and iPadOS 26.3, macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.3, visionOS 26.3. A shortcut may be able to bypass sandbox restrictions. |
| A race condition was addressed with improved state handling. This issue is fixed in iOS 26.3 and iPadOS 26.3, macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.3, tvOS 26.3, visionOS 26.3, watchOS 26.3. An app may be able to gain root privileges. |
| A race condition was addressed with improved state handling. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.4. An app may be able to elevate privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/virt/sev: Revert "Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN"
Revert
99cf1fb58e68 ("x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN").
Section 8.8 of the SNP spec says:
Before invoking SNP_INIT_EX with INIT_RMP set to 1, software must ensure
that no CPUs contain dirty cache lines for the memory containing the RMP.
Cachelines can be moved from cache to cache in a dirty state. The
wbinvd_on_all_cpus() before SNP_INIT_EX flushes the caches for each CPU, but
if the IPIs for WBINVD race with this dirty cacheline movement, it is possible
that they may not get flushed, violating the firmware requirement.
Doing wbinvd_on_all_cpus() before setting SNPEn is safer since the RMP
table is not yet in use.
[ Heroically bisected by Srikanth. ]
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix unlikely race in try_get_locked_pte()
Fix an unlikely race in try_get_locked_pte(), which could have happened
if puds or pmds get unmapped between the p?dp_get() and p?d_offset()
functions. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/fb-helper: Only consider active CRTCs for vblank sync
Only synchronize fbdev output to the vblank of an active CRTC. Go over
the list of CRTCs and pick the first that matches. Fixes warnings as
the one shown below
[ 77.201354] WARNING: drivers/gpu/drm/drm_vblank.c:1320 at drm_crtc_wait_one_vblank+0x194/0x1cc [drm], CPU#1: kworker/1:7/1867
[ 77.201354] omapdrm omapdrm.0: [drm] vblank wait timed out on crtc 0
This currently happens if the fbdev output is not on CRTC 0.
Atomic and non-atomic drivers require distinct code paths. As for other
fbdev operations, implement both and select the correct one at runtime.
Not finding an active CRTC is not a bug. Do not wait in this case, but
flush the display update as before.
v4:
- avoid possible deadlocks with locking context (Sashiko)
v3:
- drop excessive state validation (Jani)
- acquire plane and CRTC mutices (Sashiko)
v2:
- move look-up code into separate helper
- support drivers with legacy modesetting
v1:
- see https://lore.kernel.org/dri-devel/1c9e0e24-9c4a-4259-8700-cf9e5fd60ca3@suse.de/ |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Validate NIX maximum LFs correctly
NIX maximum number of LFs can be set via devlink command
but that can be done before assigning any LFs to a PF/VF.
The condition used to check whether any LFs are assigned is
incorrect. This patch fixes that condition. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix xfrm state cache insertion race
The xfrm input state cache insertion code checks the validity of
the state before acquiring the global xfrm_state_lock. Thus it's
possible for someone else to kill the state after it passed the
validity check, and then the insertion will add the dead state
to the cache.
Fix this by moving the validity check inside the lock.
This entire function is called on the input path, where BH must
be off (e.g., the caller of this function xfrm_input acquires
its spinlocks without disabling BH).
So there is no need to disable BH here or take the RCU read lock.
Remove both and replace them with an assertion that trips if BH
is accidentally enabled on some future calling path. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: fix TOCTOU race in luo_session_retrieve()
Extend the scope of the rwsem_read lock in luo_session_retrieve() to
overlap with the acquisition of the session mutex. This prevents a
concurrent thread from releasing and freeing the session between the
lookup and the mutex lock. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: mark I2C adapter when hardware is powered down
On some i.MX platforms, certain I2C client drivers keep a periodic
workqueue which continues to trigger I2C transfers.
During system suspend/resume, there exists a time window between:
- suspend_noirq and the system entering suspend
- the system starting to resume and resume_noirq
In this window, the I2C controller resources such as clock and pinctrl
may already be disabled or not yet restored.
If a workqueue triggers an I2C transfer in this period, the driver
attempts to access I2C registers while the hardware resources are
unavailable, which may lead to system hang.
Mark the I2C adapter as suspended during noirq suspend and block new
transfers until resume, ensuring that I2C transfers are only issued
when hardware resources are available. |
| n8n is an open source workflow automation platform. Prior to 1.123.64, 2.29.8, and 2.30.1, the Git node clone operation allows an authenticated workflow user to swap a validated directory for a symlink before cloning, planting a crafted repository in the community node directory that loads as a custom JavaScript node after restart and executes arbitrary code on the server. This issue is fixed in versions 1.123.64, 2.29.8, and 2.30.1. |
| Race condition in USB in Google Chrome prior to 151.0.7922.169 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Incus is a system container and virtual machine manager. Prior to version 7.3.0, when copying an instance across projects, the project restriction check (`AllowInstanceCreation`) runs BEFORE the source instance's configuration is merged into the request. Dangerous configuration keys (including `security.privileged`, `raw.lxc`, `raw.apparmor`) from the source instance are merged AFTER the check passes, bypassing all project restrictions on the target project. Version 7.3.0 patches the issue. |
| Dell Command Update (DCU), versions prior to 5.7.1, contain a Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges. |
| Dell Command Update (DCU), versions prior to 5.7.1, a Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges. |
| Nix is a package manager for Linux and other Unix systems. Prior to 2.35.0, a malicious derivation executed with the recursive-nix experimental feature can exploit a time-of-check/time-of-use race involving final symlink handling in the LocalStore restore path. The race can cause writeFile to follow a substituted final symlink when opening a path with O_TRUNC instead of enforcing FinalSymlink::DontFollow, allowing the Nix process or nix-daemon to create or truncate an empty file outside the build sandbox with the daemon user's permissions. The primitive does not provide arbitrary-content writes and requires winning the race. This issue is fixed in version 2.35.0. |
