| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL
OPDESC() simply indexes into nfsd4_ops[] by the op's operation
number, without range checking that value. It assumes callers are
careful to avoid calling it with an out-of-bounds opnum value.
nfsd4_decode_compound() is not so careful, and can invoke OPDESC()
with opnum set to OP_ILLEGAL, which is 10044 -- well beyond the end
of nfsd4_ops[]. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390/diag: fix racy access of physical cpu number in diag 9c handler
We do check for target CPU == -1, but this might change at the time we
are going to use it. Hold the physical target CPU in a local variable to
avoid out-of-bound accesses to the cpu arrays. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/sme: Set new vector length before reallocating
As part of fixing the allocation of the buffer for SVE state when changing
SME vector length we introduced an immediate reallocation of the SVE state,
this is also done when changing the SVE vector length for consistency.
Unfortunately this reallocation is done prior to writing the new vector
length to the task struct, meaning the allocation is done with the old
vector length and can lead to memory corruption due to an undersized buffer
being used.
Move the update of the vector length before the allocation to ensure that
the new vector length is taken into account.
For some reason this isn't triggering any problems when running tests on
the arm64 fixes branch (even after repeated tries) but is triggering
issues very often after merge into mainline. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can
lead to the use of wrong `CIDR_POS(c)` for calculating array offsets,
which can lead to integer underflow. As a result, it leads to slab
out-of-bound access.
This patch adds back the IP_SET_HASH_WITH_NET0 macro to
ip_set_hash_netportnet to address the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
syzkaller reportes a KASAN issue with stack-out-of-bounds.
The call trace is as follows:
dump_stack+0x9c/0xd3
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
__perf_event_header__init_id+0x34/0x290
perf_event_header__init_id+0x48/0x60
perf_output_begin+0x4a4/0x560
perf_event_bpf_output+0x161/0x1e0
perf_iterate_sb_cpu+0x29e/0x340
perf_iterate_sb+0x4c/0xc0
perf_event_bpf_event+0x194/0x2c0
__bpf_prog_put.constprop.0+0x55/0xf0
__cls_bpf_delete_prog+0xea/0x120 [cls_bpf]
cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf]
process_one_work+0x3c2/0x730
worker_thread+0x93/0x650
kthread+0x1b8/0x210
ret_from_fork+0x1f/0x30
commit 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()")
use on-stack struct perf_sample_data of the caller function.
However, perf_event_bpf_output uses incorrect parameter to convert
small-sized data (struct perf_bpf_event) into large-sized data
(struct perf_sample_data), which causes memory overwriting occurs in
__perf_event_header__init_id. |
| In the Linux kernel, the following vulnerability has been resolved:
be2net: Fix buffer overflow in be_get_module_eeprom
be_cmd_read_port_transceiver_data assumes that it is given a buffer that
is at least PAGE_DATA_LEN long, or twice that if the module supports SFF
8472. However, this is not always the case.
Fix this by passing the desired offset and length to
be_cmd_read_port_transceiver_data so that we only copy the bytes once. |
| Dell Unisphere for PowerMax vApp, version(s) 9.2.4.x, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote execution. |
| DevIL through 1.8.0 contains a heap-based buffer overflow in iGetPalette() in il_gif.cpp that allows attackers to write beyond a 768-byte palette buffer when loading GIF images. Attackers can supply a crafted two-frame GIF whose second frame uses disposal method 1 with a local colour table, writing up to 384 controlled bytes past the heap allocation and possibly executing code. |
| Progress MarkLogic Server 12.x releases before 12.1.0 and 11.x releases before 11.3.7 contain an out-of-bounds write vulnerability in certain language-processing functionality. A remote authenticated attacker could exploit this vulnerability to cause server instability or limited modification of data. |
| NVIDIA DALI contains a vulnerability where an attacker could cause an uncontrolled out-of-bounds write. A successful exploit of this vulnerability might lead to denial of service, information disclosure, and data tampering. |
| FluidSynth through 2.6.1 contains an out-of-bounds write vulnerability that allows attackers to corrupt heap and stack memory by supplying unvalidated SoundFont modulator destination values. Attackers can craft an SF2 file with PMOD/IMOD destinations of 63 to 255 that, when loaded and played, write past the voice generator array and updated_gen_bit, causing memory corruption and crashes. |
| MuJS 1.3.6 before 1.3.9 contains a heap out-of-bounds read and write vulnerability in Array.prototype.sort that allows attackers to corrupt memory by inflating a simple array's length. Attackers can supply JavaScript that enlarges a dense array's length and calls sort, causing Ap_sort_cmp and Ap_sort_swap to access slots past the buffer and crash the process. |
| A command injection vulnerability in Palo Alto Networks Cortex XSOAR and Cortex XSIAM OS Query content pack enables an authenticated administrator to execute arbitrary OS commands on remote endpoints. |
| A memory corruption vulnerability exists in FFmpeg before 8.1. The RTP encoding process. In the nal_send function in libavformat/rtpenc_h264_hevc.c, a negative size parameter (size=-3) is passed to memcpy when transmitting H.264/HEVC streams via RTP using a crafted input file. This was detected using AddressSanitizer. |
| Memory Allocation with Excessive Size Value vulnerability in ericmj decimal allows Denial of Service.
Decimal.round/3 builds the full result for the requested number of decimal places before the context precision (34 digits by default) is applied, so its cost grows with the places argument instead of with the size of the result. For positive places it appends places zero digits to the coefficient as a charlist before converting it to an integer, and for negative places it builds a charlist of -places zero digits. A single call such as Decimal.round(Decimal.new("1.5"), -50_000_000) allocates about 5.5 GB of memory, which can exhaust available memory and get the BEAM VM killed. The oldest releases instead loop once per decimal place, consuming CPU in proportion to places.
Any application that passes a user-supplied number of decimal places or scale to Decimal.round/2 or Decimal.round/3 without bounding it is exposed. The input limits added for CVE-2026-32686 do not cover the places argument.
This issue affects decimal: from 0.1.0 before 3.1.2. |
| An out-of-bounds write vulnerability in the SPI host command interface of Semtech's LR11xx transceiver firmware where a crafted SPI host command with an oversized length field can cause the firmware to write up to 254 arbitrary bytes past the bounds of an internal, non-persistent memory buffer. Exploitation requires physical access to the device and logical access to the SPI bus. |
| The NXP MCUX TRNG entropy driver in drivers/entropy/entropy_mcux_trng.c passed the caller's byte count straight to the vendor SDK routine TRNG_GetRandomData(). On i.MX RT5xx and RT6xx parts the SDK compiles its TRNG_SW_HEALTH_TESTS variant, which always copies whole 32-bit words and draws entropy rounded up to a multiple of 128 bytes. Its "caller buffer is full" guard tests dataSize == 0, so a request whose length is not a multiple of four makes dataSize underflow past zero and the SDK keeps writing into the caller's buffer for the entire extraction: a 1-byte request results in 128 bytes written, and any non-word-multiple length overflows by up to 127 bytes.
entropy_get_entropy() is a syscall, and its verifier in drivers/entropy/entropy_handlers.c validates only the requested length via K_SYSCALL_MEMORY_WRITE(). With CONFIG_USERSPACE enabled, an unprivileged user-mode thread that has merely been granted the entropy device can therefore choose both the destination address and a length such as 1, and cause the kernel to write up to 127 bytes beyond the region it proved it owns. On these Cortex-M33 targets there is no MMU, so user partitions and kernel data share one SRAM and the overflow can land in adjacent kernel state. The same defect is reached from kernel mode by any caller requesting a non-word-multiple length, including getentropy() and, in builds where sys_csrand_get()/sys_rand_get() resolve to the hardware generator, sys_rand8_get() and sys_rand16_get().
Impact is memory corruption of up to 127 bytes immediately following the supplied buffer — typically the caller's stack in kernel-mode use, or memory outside the caller's partition when driven through the syscall. The overflow offset is fully determined by the requested length and is therefore deterministic, while the written content is uncontrolled TRNG output; the practical consequences range from crashes and unpredictable state corruption to opportunistic escalation when kernel bookkeeping such as object permission bitmaps is overwritten. The affected devices are those where the MCUX SDK enables TRNG_SW_HEALTH_TESTS (MIMXRT595S, MIMXRT555S, MIMXRT533S, MIMXRT685S, MIMXRT633S), on which the TRNG is the zephyr,entropy chosen node; other SoCs using this driver take the SDK path that clamps the copy size and are unaffected.
The fix routes any unaligned prefix and any sub-word tail through a local bounce word and hands the SDK only word-multiple sizes, so the SDK's word-granular writes can no longer pass the end of the caller's buffer. |
| The user-mode syscall verifiers z_vrfy_fuel_gauge_get_props() and z_vrfy_fuel_gauge_set_props() in drivers/fuel_gauge/fuel_gauge_syscall_handlers.c declared two variable-length arrays, union fuel_gauge_prop_val k_vals[len] and fuel_gauge_prop_t k_props[len], sized directly by the caller-supplied len argument. len is an unvalidated size_t taken straight from the syscall ABI, and the VLAs were allocated before any check at all — including before the K_SYSCALL_DRIVER_FUEL_GAUGE() object-permission check. The subsequent k_usermode_from_copy() calls validated only that the user source buffer was readable; the kernel destination was never bounds-checked, since it was sized by the same attacker-chosen len.
Any thread running in user mode with CONFIG_USERSPACE enabled can invoke fuel_gauge_get_props() or fuel_gauge_set_props() with a large len. This first displaces the supervisor stack pointer by an arbitrary attacker-chosen amount — Zephyr does not build with stack-clash probing, so the displacement itself does not fault, and the nested calls made by the verifier then write frames below the privileged stack. If the caller has been granted access to a fuel-gauge device object, the memcpy inside k_usermode_from_copy() additionally writes len * sizeof(union fuel_gauge_prop_val) bytes of fully attacker-controlled data starting well below the stack base. CONFIG_PRIVILEGED_STACK_SIZE defaults to 1024 bytes, so a len of roughly 170 already exhausts it.
The result is an out-of-bounds write in supervisor mode with attacker-controlled length and, on the permitted path, attacker-controlled content — a break out of the user-mode sandbox into kernel memory, leading to kernel code execution or a system crash. A stack guard region does not contain it, because the copy begins below the guard and walks upward, corrupting unprotected memory before the guard is reached. The fix removes the kernel-side copies entirely and validates the caller's arrays in place with K_SYSCALL_MEMORY_ARRAY_READ() / K_SYSCALL_MEMORY_ARRAY_WRITE(), which also handle the len * size multiplication overflow; this is safe because neither fuel_gauge_prop_t nor union fuel_gauge_prop_val contains embedded pointers. |
| The Goodix GT9xx input driver in drivers/input/input_gt911.c reads the touch point count from the controller's status register and masks it with GT911_TOUCH_POINTS_MSK (0x0F), yielding a value of 0..15. In gt911_process() that value is used directly as the loop bound for filling point_reg[], a stack array sized to CONFIG_INPUT_GT911_MAX_TOUCH_POINTS, whose Kconfig range is 1..5 with a default of 1. No other check constrains the count; the driver relied only on a comment asserting that the controller had been programmed at init to report no more points than configured.
Each loop iteration issues an I2C read of eight bytes straight into point_reg[i], so a controller that reports more points than the array holds causes up to 112 bytes of peer-supplied data to be written past the end of the array, over the stack frame of gt911_process() in the system workqueue thread. Two further loops then read out of bounds from the same array. Triggering it requires control of, or the ability to substitute, the I2C touch controller — plausible on the many supported boards where the GT9xx panel is a pluggable display module or shield rather than an on-PCB part; a spoofed device need only answer the init probes with a supported product ID and a checksum-valid config blob. The same overflow can also occur non-adversarially, with a GT9271-class panel that ignores the driver's touch-count programming and reports up to ten points, or with bus corruption of the single status byte.
The impact is an out-of-bounds stack write with fully attacker-chosen content executing at kernel privilege, i.e. potential control-flow hijack on the host MCU, in addition to out-of-bounds reads and crashes. The attack vector is physical/local hardware access only; there is no network, USB, or syscall path to the defect. The fix clamps the reported count with min() against CONFIG_INPUT_GT911_MAX_TOUCH_POINTS before any array indexing. |
| In ssh in OpenSSH before 10.6, a $ or \ character can occur in a command-line username, leading to injection. |
