| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper verification of cryptographic signature during installation of a Printer driver via the TeamViewer_service.exe component of TeamViewer Remote Clients prior version 15.58.4 for Windows allows an attacker with local unprivileged access on a Windows system to elevate their privileges and install drivers. |
| Insufficient data authenticity verification vulnerability in Janto, versions prior to r12. This allows an unauthenticated attacker to modify the content of emails sent to reset the password. To exploit the vulnerability, the attacker must create a POST request by injecting malicious content into the ‘Xml’ parameter on the ‘/public/cgi/Gateway.php’ endpoint. |
| A vulnerability classified as problematic has been found in gradio-app gradio up to 5.29.1. This affects the function is_valid_origin of the component CORS Handler. The manipulation of the argument localhost_aliases leads to erweiterte Rechte. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| dnsjava is an implementation of DNS in Java. Records in DNS replies are not checked for their relevance to the query, allowing an attacker to respond with RRs from different zones. This vulnerability is fixed in 3.6.0. |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. |
| tiny-secp256k1 is a tiny secp256k1 native/JS wrapper. Prior to version 1.1.7, a malicious JSON-stringifyable message can be made passing on verify(), when global Buffer is the buffer package. This affects only environments where require('buffer') is the NPM buffer package. Buffer.isBuffer check can be bypassed, resulting in strange objects being accepted as a message, and those messages could trick verify() into returning false-positive true values. This issue has been patched in version 1.1.7. |
| Improper authentication in the API authentication middleware of HCL DevOps Loop allows authentication tokens to be accepted without proper validation of their expiration and cryptographic signature. As a result, an attacker could potentially use expired or tampered tokens to gain unauthorized access to sensitive resources and perform actions with elevated privileges. |
| IEEE P802.11-REVme D1.1 through D7.0 allows FragAttacks against mesh networks. In mesh networks using Wi-Fi Protected Access (WPA, WPA2, or WPA3) or Wired Equivalent Privacy (WEP), an adversary can exploit this vulnerability to inject arbitrary frames towards devices that support receiving non-SSP A-MSDU frames. NOTE: this issue exists because of an incorrect fix for CVE-2020-24588. P802.11-REVme, as of early 2025, is a planned release of the 802.11 standard. |
| Applications that use spring-boot-loader or spring-boot-loader-classic and contain custom code that performs signature verification of nested jar files may be vulnerable to signature forgery where content that appears to have been signed by one signer has, in fact, been signed by another. |
| MinIO is a High Performance Object Storage released under GNU Affero General Public License v3.0. The signature component of the authorization may be invalid, which would mean that as a client you can use any arbitrary secret to upload objects given the user already has prior WRITE permissions on the bucket. Prior knowledge of access-key, and bucket name this user might have access
to - and an access-key with a WRITE permissions is necessary. However with relevant information in place, uploading random objects to buckets is trivial and easy via curl. This issue is fixed in RELEASE.2025-04-03T14-56-28Z. |
| Clerk helps developers build user management. Applications that use the verifyWebhook() helper to verify incoming Clerk webhooks are susceptible to accepting improperly signed webhook events. The issue was resolved in @clerk/backend 2.4.0. |
| A vulnerability in the Device Analytics action frame processing of Cisco Wireless Access Point (AP) Software could allow an unauthenticated, adjacent attacker to inject wireless 802.11 action frames with arbitrary information.
This vulnerability is due to insufficient verification checks of incoming 802.11 action frames. An attacker could exploit this vulnerability by sending 802.11 Device Analytics action frames with arbitrary parameters. A successful exploit could allow the attacker to inject Device Analytics action frames with arbitrary information, which could modify the Device Analytics data of valid wireless clients that are connected to the same wireless controller. |
| An attacker who can execute arbitrary Operating Systems commands, can bypass code signing enforcements in the kernel, and execute arbitrary native code. This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111. |
| Movable Type contains an issue with use of less trusted source. If exploited, tampered email to reset a password may be sent by a remote unauthenticated attacker. |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| A vulnerability has been identified within Rancher Manager whereby the SAML authentication from the Rancher CLI tool is vulnerable to phishing attacks. The custom authentication protocol for SAML-based providers can be abused to steal Rancher’s authentication tokens. |
| The Authorize.net Payment Gateway For WooCommerce plugin for WordPress is vulnerable to payment bypass in all versions up to, and including, 8.0. This is due to the plugin not properly verifying the authenticity of the request that updates a orders payment status. This makes it possible for unauthenticated attackers to update order payment statuses to paid bypassing any payment. |
| Improper fingerprint validation in the TeamViewer Client (Full & Host) prior Version 15.54 for Windows and macOS allows an attacker with administrative user rights to further elevate privileges via executable sideloading. |
| A `named` caching resolver that is configured to send ECS (EDNS Client Subnet) options may be vulnerable to a cache-poisoning attack.
This issue affects BIND 9 versions 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.37-S1, and 9.20.9-S1 through 9.20.10-S1. |
| The implementation of EdDSA in EdDSA-Java (aka ed25519-java) through 0.3.0 exhibits signature malleability and does not satisfy the SUF-CMA (Strong Existential Unforgeability under Chosen Message Attacks) property. This allows attackers to create new valid signatures different from previous signatures for a known message. |
