| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: ml-ioh: use raw_spinlock_t for the register lock
ioh_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
ioh_irq_enable() and ioh_irq_disable() take the same lock from the
.irq_enable/.irq_disable callbacks, which are likewise invoked with
desc->lock held.
Convert the register lock to raw_spinlock_t. The same lock also
serializes the GPIO direction/value callbacks and the suspend/resume
register save/restore, and those critical sections only perform short
sequences of MMIO register accesses (ioread32()/iowrite32()); the
.irq_set_type callback additionally emits a dev_warn() on an unsupported
type. None of these are sleepable operations, so keeping this register
lock non-sleeping is appropriate for the irqchip callbacks and does not
change the GPIO-side locking contract.
This is the same fix as commit a02b8950d619 ("gpio: pch: use
raw_spinlock_t for the register lock"); this driver shares the same
structure as gpio-pch. |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: fix use-after-free of the socket by its timers
The x25 timers are armed with mod_timer() and cancelled with
timer_delete(), so a pending timer holds no reference on the socket and a
cancel does not wait for a callback already running on another CPU.
x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall
sk->sk_timer after __x25_destroy_socket() has passed its cancel point.
The following __sock_put() frees the socket while the timer is still
queued, and the next expiry uses freed memory. KASAN reports a
slab-use-after-free on the kmalloc-2k object freed by close().
timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and
x25_timer_expiry() both reach the cancels from inside the timer they
would wait on, through __x25_destroy_socket() and x25_disconnect().
Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer()
so that an armed timer owns a reference, and release it in both expiry
handlers. Rearm the heartbeat only while sk_hashed(sk) is still true,
since __x25_destroy_socket() unlinks the socket before dropping it. Arm
the deferred destroy timer the same way and drop its reference in
x25_destroy_timer().
Reproduced on net with KASAN, with the heartbeat period shortened so the
window recurs. With this patch the reproducer no longer triggers a
report and /proc/net/x25 drains.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
Input: sur40 - fix input device registration ordering
In sur40_probe(), input_register_device() was previously called early before
the V4L2 video device and vb2_queue components were fully initialized. If
userspace opened the input device immediately upon registration, sur40_open()
would trigger and start the sur40_poll() worker thread. This worker thread
invokes sur40_process_video() and accesses the uninitialized vb2_queue
structure, leading to a data race and potential system crash.
Furthermore, if V4L2 or video registration failed after input_register_device()
succeeded, the error path fell through to calling input_free_device() on a
successfully registered device instead of input_unregister_device(), corrupting
input core state.
Move input_register_device() to the very end of sur40_probe(). This ensures
the V4L2 and video queue structures are fully initialized before polling can
start, and naturally resolves the error path bug since input_free_device()
is now only called when input registration has not yet occurred.
To maintain strict LIFO (Last-In, First-Out) teardown ordering, also move
input_unregister_device() to the very beginning of sur40_disconnect(). This
guarantees that the input polling worker thread is stopped before V4L2
video components or control handlers are unregistered. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: avoid UAF on sc->tempip in xrep_tempfile_create
LOLLM noticed a potential UAF if the tempfile creation code fails after
it set sc->tempip. Fix that. |
| A flaw was found in acm-search-v2-rhel9. An attacker with administrative privileges on the hub cluster, specifically with patch access to the Search Custom Resource (CR), could exploit a vulnerability in the `Collector.ImageOverride` field. This allows the attacker to deploy an arbitrary container image across all managed clusters. The consequence is remote code execution (RCE), enabling the attacker to execute commands and potentially access sensitive information across the entire fleet of managed clusters. |
| A flaw was found in acm-operator-bundle. The build process for this component downloads and runs a script from a remote source without verifying its authenticity or integrity. This script gains access to sensitive credentials, such as GitHub access tokens and registry passwords, used in the build environment. A remote attacker could exploit this vulnerability to inject malicious code, leading to unauthorized access to build resources and potential compromise of the resulting operator bundle. |
| Download of code without integrity check, inclusion of functionality from untrusted control sphere, and cleartext
transmission of sensitive information vulnerability in Ozols Grupa OZOLS
on Windows caused by an abandoned auto-update domain. Affected
component: the automatic update channel - OzolsSQL client update path, the <db>_update SQL Server Agent job (@subsystem = N'ActiveScripting') and serv_update.vbs.
This issue affects OZOLS: before 1.1.1233. |
| Kernel software installed and running inside a Guest VM may post improper commands to the GPU Firmware to trigger a write of data outside the Guest's virtualised GPU memory.
Software installed and run under a Guest VM can send commands to the GPU which result in out of bounds memory accesses. These can be used to escalate privileges. |
| Tor before 0.4.9.10 did not reject a CONFLUX_LINK cell that arrives on a circuit which already has attached streams. A malicious client could send a RELAY_COMMAND_BEGIN before the CONFLUX_LINK on the same circuit, attaching an exit stream that would later end up orphan leaving a dangling circuit back-pointer and a use-after-free (UAF) when the circuit is freed. This is TROVE-2026-025. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to execute arbitrary code due to improper validation of an attacker-controlled pointer. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 has a pointer validation flaw exists in the AIX Virtual SCSI (vSCSI) initiator driver. Successful exploitation may result in denial of service, privilege escalation, or full compromise of the client LPAR kernel. |
| Use after free in DOM in Google Chrome prior to 151.0.7922.173 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| It was possible to execute a ReDoS-type attack inside CKEditor 4 before 4.16 by persuading a victim to paste crafted text into the Styles input of specific dialogs (in the Advanced Tab for Dialogs plugin). |
| It was possible to execute a ReDoS-type attack inside CKEditor 4 before 4.16 by persuading a victim to paste crafted URL-like text into the editor, and then press Enter or Space (in the Autolink plugin). |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.12, a reachable assertion failure in the HTJ2K decode path allows a crafted HTJ2K-compressed EXR file to cause an unconditional process abort in any application that calls exr_start_read() on untrusted input, resulting in denial of service. The crash is triggered by a QCD marker whose lower five bits are zero, which OpenEXR passes into the vendored OpenJPH library while constructing the codestream and evaluating its quantization delta parameters. OpenJPH uses an assertion rather than a recoverable error to validate those bits, so any invalid value calls abort() directly and cannot be intercepted by surrounding error handling, a problem compounded by OpenEXR wrapping only its internal HT header parser in error handling while leaving the later codestream read and construction calls unprotected. This issue has been resolved in version 3.4.13. |
| In the Linux kernel, the following vulnerability has been resolved:
rqspinlock: Reset tail when preserving queue on deadlock
Currently, the destruction of the waiter queue is suppressed for
rqspinlock in cases where a deadlock is detected. Deadlock checks happen
relatively frequently (on entry for AA, within 1ms for ABBA), and waiter
threads may not be involved in locking scenarios involving deadlocks.
Thus, it is useful to not flush the queue and let other waiters take a
stab at acquiring the lock after we detect a deadlock and exit.
However, we need to follow the same logic as what we did previously for
the waitq_timeout label: reset the tail, and if we cannot, signal the
next waiter appropriately. In case of deadlocks, this signal would just
mark the MCS node as unlocked, and in case of timeouts, it would signal
RES_TIMEOUT_VAL. The difference thus is in the value propagated, which
decides whether the queue remains active or gets flushed.
Not doing the tail reset, and waiting for the next waiter can lead to
cases where we are the final waiter, and thus no next waiter arrives,
leading to intermittent stalls in this path. Once the next waiter does
join, we will be unblocked. In the theoretical case when the next waiter
never joins, we risk stalling indefinitely.
This can only happen for ABBA deadlocks, since entry into the wait queue
is guarded with AA checks. A precise sequence of executions leading up
to this scenario can be:
CPU 0 holds lock A.
CPU 1 holds lock B.
CPU 2 attempts lock B, becomes the pending waiter for B.
CPU 0 attempts lock B. B has locked+pending bits set, thus CPU 0 queues.
CPU 1 attempts lock A.
CPU 0 detects an ABBA deadlock.
Once deadlock detection happens for CPU 0, it will sit waiting for the
next waiter in the queue to populate node->next, which will experience
delays until such a waiter arrives.
Fix this by adjusting the logic for the check for deadlocks preceding
the waitq_timeout label. It would make sense to consolidate code for
both cases and use 'ret' to distinguish the value being propagated, but
that is left as an exercise for a future refactoring task to avoid diff
noise in this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: amba-pl011: cancel RS485 hrtimers after freeing IRQ
The RS485 trigger hrtimers are embedded in the devm-managed port and can
fire after it is freed. The IRQ handler can arm a timer, so free the IRQ
first and then cancel both timers.
Complete the RS485 stop without arming a timer, and cancel the timers
in remove() for the suspend-then-unbind path, where shutdown is not
called.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb: Fix UAF at delayed release of MIDI2 EPs
The recent fix for UAF in ump_to_endpoint() caused another UAF because
it tries to dereference the UMP endpoint object, but this might be
executed at a delayed context where the endpoint has been already
released.
Add private_free to clear the associated data for avoiding the further
dereference for delayed releases. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix incorrect flush address in direct page table reclaim
When zap_pte_range reclaims a page table, it does:
pte_free_tlb(tlb, pmd_pgtable(pmdval), addr);
and this is unconditionally wrong: if this code executes, addr *always*
points one past the end of the range covered by the table. The addr
parameter is used to flush the TLB (really the paging-structure-cache)
to drop references to the to-be-freed table, and any architecture that
cares about the parameter will flush the wrong address. (But they'll
still free the correct page).
I think it's worth contemplating why the kernel works at all.
If we hit the offending line of code, we will first clear the PMD entry
(line 1954, zap_empty_pte_table), then we will issue pending flushes if
force_flush is set (tlb_flush_mmu_tlbonly(tlb)), then we will skip the
retry on line 1979 (phew!), and then we will do the offending
pte_free_tlb call. *Or* we will clear the PMD entry immediately before
pte_free_tlb (line 1983, zap_pte_table_if_empty).
If we have any pending flushes (i.e. we actually zapped any last-level
entries) at the time we clear the PMD entry, then the flush really ought
to flush all references to the table (Linus certainly seems to think it
will on all architectures [0]).
The condition under which we have no accumulated flushes at the time of
the clear is very complex (the whole zap_pte_range function has absurdly
complex control flow). If we do hit the bad case, then we will end up
clearing the PMD entry after the last time the range is flushed, and any
CPU is free to cache a reference to the (empty) page table. If this
happens due to an ordinary read or write, it would segfault, so it would
be rare. But the cache could be speculatively filled as well. Then
we'll flush the wrong address and then free and possibly reuse the
table.
On x86, even flushing the wrong address works on non-KPTI Intel systems
because INVLPG flushes *all* paging-structure-caches, not just the ones
for the target address. But INVPCID does not, and flush_tlb_one_user
will use INVPCID if it's available. And then we're toast. AMD systems
are more susceptible: we set the EFER.TCE bit, which makes even INVLPG
only flush the target address.
I think this might fix an issue in ripgrep reported here:
https://github.com/BurntSushi/ripgrep/issues/3494
[0] https://lore.kernel.org/all/CA+55aFzBggoXtNXQeng5d_mRoDnaMBE5Y+URs+PHR67nUpMtaw@mail.gmail.com/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Prevent subbuf order change when resizing is disabled
Because ring_buffer_subbuf_order_set() frees buffer pages, we can't
allow it when resizing is disabled. A non-consuming reader is at risk of
use-after-free (rb_advance_iter()).
Return -EBUSY on resize_disabled, matching ring_buffer_resize()
behaviour. |
