| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid stale runlist element dereference in MFT writeback
ntfs_write_mft_block() maps each $MFT record through the $MFT data
runlist. For sub-folio clusters it looks up a struct runlist_element under
ni->runlist.lock, drops the lock, and later uses rl->length and rl->vcn
when choosing folio_sz.
That pointer is only borrowed from ni->runlist.rl. Concurrent $MFT
allocation extension can merge a replacement runlist under the same lock,
and ntfs_rl_realloc() can free the old backing array. If that happens
between the lookup and the later folio_sz decision, writeback can
dereference freed runlist storage.
The buggy scenario involves two paths, with each column showing the order
within that path:
MFT writeback path: $MFT allocation extension:
1. Look up rl under 1. Extend the $MFT data allocation.
ni->runlist.lock. 2. Publish a replacement runlist.
2. Drop ni->runlist.lock. 3. Free the old runlist array.
3. Read rl->length and rl->vcn
to choose folio_sz.
Compute the remaining run length while ni->runlist.lock is still held, and
use that scalar after unlock. This preserves the existing folio sizing
decision without carrying a borrowed runlist_element across the lock
boundary.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in ntfs_mft_writepages+0x1c8d/0x1fb0
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? ntfs_mft_writepages+0x1c8d/0x1fb0
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x20d/0x410
? ntfs_mft_writepages+0x1c8d/0x1fb0
kasan_report+0xe0/0x110
? ntfs_mft_writepages+0x1c8d/0x1fb0
ntfs_mft_writepages+0x1c8d/0x1fb0
? __pfx_ntfs_mft_writepages+0x10/0x10
? __pfx___mutex_unlock_slowpath+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? iput+0x92/0xa80
do_writepages+0x219/0x530
? __pfx_do_writepages+0x10/0x10
__writeback_single_inode+0x117/0xf50
? do_raw_spin_lock+0x130/0x270
? __pfx_do_raw_spin_lock+0x10/0x10
? __pfx___writeback_single_inode+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
writeback_sb_inodes+0x65b/0x1810
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x2b8/0x2f0
? __pfx_writeback_sb_inodes+0x10/0x10
? lock_release+0x1e0/0x280
? _raw_spin_unlock+0x23/0x40
? move_expired_inodes+0x2b8/0x850
__writeback_inodes_wb+0xf4/0x270
? __pfx___writeback_inodes_wb+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? queue_io+0x2e4/0x410
wb_writeback+0x666/0x880
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx_wb_writeback+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? get_nr_dirty_inodes+0x1c/0x170
wb_workfn+0x75e/0xbb0
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x27/0x60
? __pfx_wb_workfn+0x10/0x10
? __pfx_debug_object_deactivate+0x10/0x10
? lock_acquire+0x2b8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? lock_release+0x1e0/0x280
process_one_work+0x8d0/0x1870
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x575/0xf80
? __pfx_worker_thread+0x10/0x10
kthread+0x2e7/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x576/0x810
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x57e/0xe10
? __switch_to_asm+0x33/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 970:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kvmalloc_node_noprof+0x353/0x920
ntfs_rl_realloc+0x3c/0x80
ntfs_runlists_merge+0x1212/0x3010
ntfs_mft_data_extend_allocation_nolock+0x3e0/0x1f40
ntfs_mft_record_alloc+0x1ab4/0x4f10
__ntfs_create+0x680/0x2e50
ntfs_create+0x1e6/0x3a0
path_openat+0x2b55/0x3c10
do_file_open+0x1f4/0x460
do_sys_openat2+0xde/0x170
__x64_sys_openat+0x122/0x1e0
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 1294:
kasan_save_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
minix: avoid overflow in bitmap block count calculation
minix_check_superblock() uses minix_blocks_needed() to verify that the
on-disk imap and zmap block counts are large enough for the advertised
inode and zone counts.
The helper currently performs DIV_ROUND_UP() in unsigned int arithmetic.
A Minix v3 image can set s_ninodes or s_zones near UINT_MAX so the
addition inside DIV_ROUND_UP() wraps to zero. That makes a zero imap/zmap
block count look valid, after which minix_fill_super() can dereference
s_imap[0] or s_zmap[0] even though no bitmap buffers were allocated.
Impact: mounting a crafted Minix v3 image whose s_ninodes or s_zones is
near UINT_MAX makes minix_check_superblock() accept a zero bitmap-block
count and minix_fill_super() dereference s_imap[0]/s_zmap[0], panicking
the kernel.
The divisor is the bitmap capacity in bits, blocksize * 8, which is
always a power of two: minix_fill_super() obtains the block size through
sb_set_blocksize(), and blk_validate_block_size() rejects any size that
is not a power of two. Use DIV_ROUND_UP_POW2(), which divides before
adding the round-up term and so cannot overflow for a power-of-two
divisor. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/ts4800: Fix missing chained handler cleanup on remove
The driver installs a chained handler for the parent interrupt during probe
using irq_set_chained_handler_and_data(), but the remove function does not
clear this handler. This leaves a dangling handler that may be called when
the parent interrupt fires after the driver has been removed, potentially
accessing freed memory and causing a kernel crash.
Additionally, the parent_irq obtained via irq_of_parse_and_map() is not
stored, making it inaccessible in the remove function. Moreover, interrupt
mappings created during probe are not properly disposed.
Fix this by:
- Saving parent_irq in probe
- Clearing the chained handler with NULL in ts4800_ic_remove()
- Disposing all IRQ mappings before domain removal to prevent resource
leaks |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: don't cache shinfo across skb realloc
fbnic_tx_lso() calls skb_cow_head() which may reallocate the skb
including the shared info. We can't use the pointer calculated
before the call.
BUG: KASAN: slab-use-after-free in fbnic_tx_lso.isra.0+0x668/0x8e0
Read of size 4 at addr ff110000262edd98 by task swapper/5/0
Call Trace:
fbnic_tx_lso.isra.0+0x668/0x8e0
fbnic_xmit_frame+0x622/0xba0
dev_hard_start_xmit+0xf4/0x620
Allocated by task 8653:
__alloc_skb+0x11e/0x5f0
alloc_skb_with_frags+0xcc/0x6c0
sock_alloc_send_pskb+0x327/0x3f0
__ip_append_data+0x188b/0x47a0
ip_make_skb+0x24a/0x300
udp_sendmsg+0x14d2/0x21e0
Freed by task 0:
kfree+0x123/0x5a0
pskb_expand_head+0x36c/0xfa0
fbnic_tx_lso.isra.0+0x500/0x8e0
fbnic_xmit_frame+0x622/0xba0
dev_hard_start_xmit+0xf4/0x620
sch_direct_xmit+0x25b/0x1100
The buggy address belongs to the object at ff110000262edc40
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 344 bytes inside of
freed 640-byte region [ff110000262edc40, ff110000262ede |
| In the Linux kernel, the following vulnerability has been resolved:
alloc_tag: fix use-after-free in /proc/allocinfo after module unload
allocinfo_start() only reinitializes the codetag iterator at position 0.
For subsequent reads (position > 0), it reuses cached iterator state from
the previous batch. allocinfo_stop() drops mod_lock between read batches,
which allows module unload to complete and free the module memory that the
cached iterator still references:
CPU0 (read) CPU1 (rmmod)
---- ----
allocinfo_start(pos=0)
down_read(mod_lock)
allocinfo_show()
...
allocinfo_stop()
up_read(mod_lock)
codetag_unload_module()
kfree(cmod)
release_module_tags()
...
free_mod_mem()
allocinfo_start(pos=N)
down_read(mod_lock)
// reuses cached iter, skips re-init
allocinfo_show()
ct->filename <-- UAF
After free_mod_mem() frees the module's .rodata, allocinfo_show()
dereferences ct->filename, ct->function which point there.
Save the iterator state in allocinfo_next() and resume from it in
allocinfo_start() with codetag_next_ct(), which detects module removal via
idr_find() returning NULL and skips to the next module. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints
MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A
later setup failure can still jump to snd_usb_midi_v2_free(), which
currently frees each endpoint and its coherent URB buffers without first
stopping the submitted URBs. A completion can then dereference the
embedded URB context and endpoint state after they have been freed, or
try to resubmit from the stale endpoint.
This was observed as a KASAN slab-use-after-free in
input_urb_complete().
The buggy scenario involves two paths, with each column showing the order
within that path:
probe error path: USB completion path:
1. start_input_streams() submits 1. The HCD still owns a
input URBs. submitted input URB.
2. A later setup helper returns 2. input_urb_complete() runs
an error. with urb->context in ep.
3. snd_usb_midi_v2_free() frees 3. The completion reads ep
endpoint storage and URB buffers. state and can requeue URBs.
Make the endpoint destructor follow the same teardown ordering used for
disconnect when the endpoint has not already been disconnected: publish
ep->disconnected, kill the URBs synchronously, and drain the endpoint
before freeing URB buffers and endpoint storage. The guard avoids
repeating the stop sequence after the normal
snd_usb_midi_v2_disconnect_all() path, while still synchronizing the
direct MIDI 2.0 create-error free path.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in input_urb_complete+0x37/0x1b0
Workqueue: usb_hub_wq hub_event
RIP: 0010:_raw_spin_unlock_irq+0x2e/0x50
Read of size 8
Call trace:
dump_stack_lvl+0x77/0xb0
print_report+0xce/0x5f0
input_urb_complete+0x37/0x1b0 (sound/usb/midi2.c:186)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__usb_hcd_giveback_urb+0x112/0x1d0
dummy_timer+0xaaa/0x19a0
lock_is_held_type+0x9a/0x110
__lock_acquire+0x467/0x28b0
mark_held_locks+0x40/0x70
_raw_spin_unlock_irqrestore+0x44/0x60
lockdep_hardirqs_on_prepare+0xbb/0x1a0
__hrtimer_run_queues+0x101/0x520
hrtimer_run_softirq+0xd0/0x130
handle_softirqs+0x15b/0x670
__irq_exit_rcu+0xd0/0x170
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x6c/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: mma8452: handle I2C read error(s) in mma8452_read()
Currently, If i2c_smbus_read_i2c_block_data() fails but
mma8452_set_runtime_pm_state() succeeds, mma8452_read() returns 0.
As a result, the caller mma8452_read_raw() assumes the read was
successful and proceeds to use a buffer containing uninitialized
stack memory.
Add proper checking of the I2C read return value and propagate errors
to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: nvec: fix use-after-free in nvec_rx_completed()
In nvec_rx_completed(), when an incomplete RX transfer is detected,
nvec_msg_free() is called to return the message back to the pool by
clearing its 'used' atomic flag. Immediately after this, the code
accesses nvec->rx->data[0] to check the message type.
Since nvec_msg_free() marks the pool slot as available via atomic_set(),
any concurrent or subsequent call to nvec_msg_alloc() could claim that
same slot and overwrite its data[] array. Reading nvec->rx->data[0] after
freeing the message is therefore a use-after-free.
Fix this by saving the message type byte before calling nvec_msg_free(),
then using the saved value for the battery quirk check. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (lm90) Only report alarms if driver is ready
Userspace can read sysfs attributes before driver registration is complete,
immediately after devm_hwmon_device_register_with_info() has been called.
At that time, data->hwmon_dev is not yet initialized. This can trigger
a NULL pointer access since lm90_update_device() and with it
lm90_update_alarms_locked() will be called. This call schedules
report_work and lm90_report_alarms(), which passes the still-NULL
data->hwmon_dev to hwmon_notify_event() and triggers a NULL pointer
dereference.
Fix the problem by only scheduling the report and alert workers
data->hwmon_dev is set. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Stop leased rxq before uninstalling its memory provider
netif_rxq_cleanup_unlease() tears down the memory provider that was
installed on a physical RX queue through a netkit queue lease. It
currently revokes the provider's DMA mappings before stopping the
physical queue:
__netif_mp_uninstall_rxq(virt_rxq, p); /* DMA unmap */
__netif_mp_close_rxq(phys_rxq->dev, rxq_idx, p); /* queue stop */
This inverts the ordering used by the regular teardown paths (normal
device unregister and the io_uring zcrx close path), which stop the
queue before revoking the provider's mappings.
With the physical queue still live, its NAPI can keep consuming
net_iov entries from the page_pool alloc cache after the
__netif_mp_uninstall_rxq() has already cleared their dma_addr,
opening a window for the device to DMA to a stale or zero address.
Fix it by swapping the two calls so the queue is stopped (and its
NAPI quiesced) before the provider is uninstalled. No functional
regression was observed across repeated runs of the nk_qlease.py
HW selftest, which exercises the lease teardown path; this was
tested against fbnic QEMU emulation. |
| In the Linux kernel, the following vulnerability has been resolved:
of: reserved_mem: avoid post-init UAF when alloc_reserved_mem_array() fails
The global pointer 'reserved_mem' continues to reference the
reserved_mem_array which lives in __initdata if
alloc_reserved_mem_array() fails. of_reserved_mem_lookup() is
exported for post-init use, that would dereference freed memory
and trigger a use-after-free.
So reset reserved_mem_count to 0 when alloc_reserved_mem_array()
fails. |
| Use-after-free in the DOM: Core & HTML component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Use-after-free in the Graphics: ImageLib component. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Use-after-free in the Graphics: Text component. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Use-after-free in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in __close_file_table_ids()
A ksmbd_file can remain alive after logical close while another session
holds a temporary reference obtained through ksmbd_lookup_fd_inode().
ksmbd_close_fd() currently marks the file closed and drops the idr-owned
reference, but leaves the pointer published in the closing session's idr
until the final reference is dropped.
If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final()
supplies the foreign session's file table to __ksmbd_close_fd(). The object
is then freed without being removed from its owner's idr, and the owner
session later dereferences the stale pointer during file-table teardown.
Remove the volatile id from the owner's idr while ksmbd_close_fd() still
holds that table's lock, and clear volatile_id before dropping
the idr-owned reference. A later foreign final put then only performs
physical destruction and cannot remove the object from the wrong table. |
| Use after free in Browser in Google Chrome on on Mac prior to 151.0.7922.169 allowed a remote attacker leveraging social engineering to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use of uninitialized resource in GPU in Google Chrome prior to 151.0.7922.169 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in WebGL in Google Chrome prior to 151.0.7922.169 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Valkey is a distributed key-value database. Prior to 7.2.14, 8.0.10, 8.1.9, 9.0.5, and 9.1.1, Valkey's RESTORE command accepts a malformed RDB stream payload that assigns one Pending Entry List NACK to multiple consumers during stream consumer-group deserialization, causing a use-after-free when one consumer is deleted while another still references the shared NACK and potentially allowing remote code execution. This issue is fixed in versions 7.2.14, 8.0.10, 8.1.9, 9.0.5, and 9.1.1. |
